Murata NCP03YS47005RL For temperature compensation 0201 (0603) size Datasheet

!Note Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.
This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specifications before ordering.
NTC Thermistors
Murata
Manufacturing Co., Ltd.
Cat.No.R44E-9
R44E9.pdf 05.4.13
catalog
to prevent
smoking
and/or
burning,
Pleaseread
readrating
ratingand
and!CAUTION
!CAUTION(for
(forstorage,
storage,operating,
operating,rating,
rating,soldering,
soldering,mounting
mountingand
andhandling)
handling)ininthis
thisPDF
catalog
to prevent
smoking
and/or
burning,
etc. etc.
!Note •Please
R44E9.pdf 05.4.13
you are
requested
approvespecifications.
our product specifications
or to transact
approval
for product
before ordering.
•This
Thiscatalog
cataloghas
hasonly
onlytypical
typicalspecifications.
specificationsTherefore,
because there
is no
space fortodetailed
Therefore, please
approvethe
our
productsheet
specifications
or specifications
transact the approval
sheet for product specifications before ordering.
CONTENTS
1
Part Numbering
2
Basic Characteristics
5
1
for Temperature Compensation 0201 (0603) Size
6
2
for Temperature Compensation 0402 (1005) Size
8
3
for Temperature Compensation 0603 (1608) Size
10
4
for Temperature Compensation 0805 (2012) Size
12
for Temperature Compensation Temperature Characteristics (Center Value)
14
Chip Type !Caution/Notice
17
Chip Type Package
20
5
for Temperature Sensor Lead Type
23
6
for Temperature Sensor Lead Insulation Type
24
for Temperature Sensor Temperature Characteristics (Center Value)
26
for Temperature Sensor Lead Type/Lead Insulation Type !Caution/Notice
27
for Temperature Sensor Lead Type/Lead Insulation Type NTSA/NTSD Series Package
28
7
for Inrush Current Suppression Lead Type
29
Current-R Ratio (RT/R25) / Current-Temperature Characteristics (Typical)
31
for Inrush Current Suppression Lead Type !Caution / Notice
35
for Inrush Current Suppression Lead Type Package
37
2
3
4
5
6
7
Recycled Paper
R44E9.pdf 05.4.13
catalog
to prevent
smoking
and/or
burning,
Pleaseread
readrating
ratingand
and!CAUTION
!CAUTION(for
(forstorage,
storage,operating,
operating,rating,
rating,soldering,
soldering,mounting
mountingand
andhandling)
handling)ininthis
thisPDF
catalog
to prevent
smoking
and/or
burning,
etc. etc.
!Note •Please
you are
requested
approvespecifications.
our product specifications
or to transact
approval
for product
before ordering.
•This
Thiscatalog
cataloghas
hasonly
onlytypical
typicalspecifications.
specificationsTherefore,
because there
is no
space fortodetailed
Therefore, please
approvethe
our
productsheet
specifications
or specifications
transact the approval
sheet for product specifications before ordering.
o Part Numbering
NTC Thermistors for Temp. Sensor and Compensation Chip Type
(Part Number)
NC
P
18
XH
103
q
w e
r
t
03
RB
y u
i
J
qProduct ID
yResistance Tolerance
Product ID
NC
NTC Thermistors Chip Type
wSeries
Code
Series
P
Plated Termination Series
Code
Resistance Tolerance
E
±3%
F
±1%
J
±5%
K
±10%
uIndividual Specifications
eDimensions (LgW)
Structures and others are expressed by two figures.
Code
Dimensions (LgW)
EIA
Code
Individual Specifications
03
0.60g0.30mm
0201
03
Standard Type
15
1.00g0.50mm
0402
18
1.60g0.80mm
0603
21
2.00g1.25mm
0805
Please contact us for details.
iPackaging
Code
rTemperature Characteristics
Temperature Characteristics
RB
Paper Taping 4mm Pitch
WB
Nominal B-Constant 4050e4099K
RC
Paper Taping 2mm Pitch (10000 pcs.)
WD
Nominal B-Constant 4150e4199K
RL
Paper Taping 2mm Pitch (15000 pcs.)
WF
Nominal B-Constant 4250e4299K
WL
Nominal B-Constant 4450e4499K
WM
Nominal B-Constant 4500e4549K
XC
Nominal B-Constant 3100e3149K
XF
Nominal B-Constant 3250e3299K
XQ
Nominal B-Constant 3650e3699K
XH
Nominal B-Constant 3350e3399K
XM
Nominal B-Constant 3500e3549K
XV
Nominal B-Constant 3900e3949K
XW
Nominal B-Constant 3950e3999K
tResistance
2
Plastic Taping 4mm Pitch
Code
Expressed by three figures. The unit is ohm (Ω). The first and
second figures are significant digits, and the third figure
expresses the number of zeros which follow the two figures. If
there is a decimal point, it is expressed by the capital letter "R". In
this case, all figures are significant digits.
Ex.)
Packaging
RA
Code
Resistance
102
1kΩ
103
10kΩ
104
100kΩ
R44E9.pdf 05.4.13
catalog
to prevent
smoking
and/or
burning,
Pleaseread
readrating
ratingand
and!CAUTION
!CAUTION(for
(forstorage,
storage,operating,
operating,rating,
rating,soldering,
soldering,mounting
mountingand
andhandling)
handling)ininthis
thisPDF
catalog
to prevent
smoking
and/or
burning,
etc. etc.
!Note •Please
you are
requested
approvespecifications.
our product specifications
or to transact
approval
for product
before ordering.
•This
Thiscatalog
cataloghas
hasonly
onlytypical
typicalspecifications.
specificationsTherefore,
because there
is no
space fortodetailed
Therefore, please
approvethe
our
productsheet
specifications
or specifications
transact the approval
sheet for product specifications before ordering.
NTC Thermistors for Temp. Sensor and Compensation Lead Type
(Part Number)
NT
SA0
XH
103
q
w
e
r
F
E1 B0
t y
u
qProduct ID
tResistance Tolerance
Product ID
NT
NTC Thermistors
Code
Resistance Tolerance
E
±3%
F
±1%
wSeries
Code
Series
SA0
for Temperature Sensors No Lead-coating Type
SD0
for Temperature Sensors Lead-coating Type
(Total Length 30mm max.)
SD1
for Temperature Sensors Lead-coating Type
(Total Length 30 to 50mm)
eTemperature Characteristics
yIndividual Specifications
A lead structure and other specifications are expressed by two digits.
Code
Individual Specifications
E1
Standard Bulk (NTSA, NTSD0 Series)
N6
Standard Taping (NTSA Series)
PB
Standard Bulk (NTSD1 Series)
uPackaging (NTSA/NTSD0 Series)
Code
Temperature Characteristics
Code
Packaging
WB
Nominal B-Constant 4050e4099K
A0
Ammo Pack
WC
Nominal B-Constant 4100e4149K
B0
Bulk
WD
Nominal B-Constant 4150e4199K
WF
Nominal B-Constant 4250e4299K
XM
Nominal B-Constant 3500e3549K
Code
Total Length
XH
Nominal B-Constant 3350e3399K
30
30mm
XR
Nominal B-Constant 3700e3749K
40
40mm
XV
Nominal B-Constant 3900e3949K
50
50mm
uTotal Length (NTSD1 Series)
rResistance
Expressed by three figures. The unit is ohm (Ω). The first and
second figures are significant digits, and the third figure
expresses the number of zeros which follow the two figures. If
there is a decimal point, it is expressed by the capital letter "R". In
this case, all figures are significant digits.
Ex.)
Code
Resistance
202
2kΩ
203
20kΩ
3
R44E9.pdf 05.4.13
catalog
to prevent
smoking
and/or
burning,
Please read
read rating
rating and
and !CAUTION
!CAUTION (for
(for storage,
storage, operating,
operating, rating,
rating, soldering,
soldering, mounting
mounting and
and handling)
handling) in
in this
this PDF
catalog
to prevent
smoking
and/or
burning,
etc. etc.
!Note • Please
you are
requested
approvespecifications.
our product specifications
or to transact
for product
before ordering.
• This
Thiscatalog
cataloghas
hasonly
onlytypical
typicalspecifications.
specificationsTherefore,
because there
is no
space fortodetailed
Therefore, please
approvethe
ourapproval
productsheet
specifications
or specifications
transact the approval
sheet for product specifications before ordering.
NTC Thermistors for Inrush Current Suppression
(Part Number)
NT
PA7
160
L
BM
B0
q
w
e
r
t
y
qProduct ID
rResistance Tolerance
Product ID
NT
NTC Thermistors
wSeries
Code
Resistance Tolerance
L
±15%
tIndividual Specifications
Code
Series
Nominal Body Diameter
PA7
ø7mm
PA9
Inrush Current
Suppression
Lead Type
PAA
PAD
A lead structure and other specifications are expressed by two
capital letters.
ø9mm
Code
Individual Specifications
Body Diameter
ø10mm
DK
Standard Type
ø18mm, ø22mm
ø13mm
DN
Standard Type
ø10mm, ø13mm
PAJ
ø18mm
BM
Standard Type
ø7mm, ø9mm
PAN
ø22mm
yPackaging
eResistance
Expressed by three figures. The unit is ohm (Ω). The first and
second figures are significant digits, and the third figure
expresses the number of zeros which follow the two figures. If
there is a decimal point, it is expressed by the capital letter "R". In
this case, all figures are significant digits.
Ex.)
4
Code
Resistance
3R0
3Ω
100
10Ω
Code
Packaging
A0
Ammo Pack
B0
Bulk
R44E9.pdf 05.4.13
catalog
to prevent
smoking
and/or
burning,
Pleaseread
readrating
ratingand
and!CAUTION
!CAUTION(for
(forstorage,
storage,operating,
operating,rating,
rating,soldering,
soldering,mounting
mountingand
andhandling)
handling)ininthis
thisPDF
catalog
to prevent
smoking
and/or
burning,
etc. etc.
!Note •Please
you are
requested
approvespecifications.
our product specifications
or to transact
approval
for product
before ordering.
•This
Thiscatalog
cataloghas
hasonly
onlytypical
typicalspecifications.
specificationsTherefore,
because there
is no
space fortodetailed
Therefore, please
approvethe
our
productsheet
specifications
or specifications
transact the approval
sheet for product specifications before ordering.
Basic Characteristics
!Basic Characteristics
1. Zero-power Resistance of Thermistor : R
[Resistance vs. Temperature]
102
Resistance VS. Temperature Characteristics, R/R25
R=R0 expB (1/T-1/T0) ..............(1)
R : Resistance in ambient temperature T (K)
(K : absolute temperature)
R0 : Resistance in ambient temperature T0 (K)
B : B-constant of Thermistor
2. B-Constant
as (1) formula
B=Rn (R/R0) / (1/T-1/T0)
............(2)
3. Thermal Dissipation Constant
When electric power P (mW) is spent in ambient
temperature T1 and thermistor temperature rises T2,
there is a formula as follows
P=C (T2-T1) ..................(3)
C : Thermal dissipation constant (mW/°C)
Thermal dissipation constant is varied with dimensions,
measurement conditions, etc.
101
1
10−1
B=3450
B=3900
B=4100
10−2
−20
0
20 40 60 80 100 120
Temperature (˚C)
4. Thermal Time Constant
Period in which Termistor's temperature will change
63.2% of its temperature difference from ambient
temperature T0 (°C) to T1 (°C).
[Thermal Time Constant]
T1
Temperature
X
63.2%
T0
Time
!Performance
Item
Resistance
Condition
Measured by zero-power in specified ambient temperature.
Calculated between two specified ambient temperatures by next formula.
T and T0 is absolute temperature (K).
B-Constant
B=
Thermal Dissipation
Constant
Rn (R/R0)
1/TY1/T0
Shows necessary electric power that Thermistor's temperature rises 1˚C by self heating.
It is calculated by next formula. (mW/˚C)
C=
P
TYT0
Rated Electric Power
Shows necessary electric power that Thermistor's temperature rises 100˚C by self heating in ambient temperature 25˚C.
Permissive Operating Current
It is possible to keep Thermistor's temperature rising max. 1˚C
Please inquire about test conditions and ratings.
5
R44E9.pdf 05.4.13
catalog
to prevent
smoking
and/or
burning,
Pleaseread
readrating
ratingand
and!CAUTION
!CAUTION(for
(forstorage,
storage,operating,
operating,rating,
rating,soldering,
soldering,mounting
mountingand
andhandling)
handling)ininthis
thisPDF
catalog
to prevent
smoking
and/or
burning,
etc. etc.
!Note •Please
you are
requested
approvespecifications.
our product specifications
or to transact
approval
for product
before ordering.
•This
Thiscatalog
cataloghas
hasonly
onlytypical
typicalspecifications.
specificationsTherefore,
because there
is no
space fortodetailed
Therefore, please
approvethe
our
productsheet
specifications
or specifications
transact the approval
sheet for product specifications before ordering.
NTC Thermistors
1
for Temperature Compensation 0201 (0603) Size
0.30±0.03
0201/0402/0603/0805 sized Chip NTC Thermistor have Ni
barrier termination and provide excellent
solderability and offer high stability in environment
by unique inner construction.
0.15±0.05
0.15±0.05
0.60±0.03
■ Features
0.30±0.03
1. Excellent solderability and high stability in
environment
2. Excellent long time aging stability
3. High accuracy in resistance and B-constant
4. Reflow soldering possible
5. Lead is not contained in the product.
Electrode
(Ag System + Ni Plating + Sn Plating)
(in mm)
■ Applications
1. Temperature compensation of transistor, IC, crystal
oscillator of mobile communications equipment
2. Temperature sensor for rechargeable batteries
3. Temperature compensation of LCD
4. Temperature compensation and sensing of car audio
equipment (CD, MD, Tuner)
5. Temperature compensation of several kinds of
circuits
Resistance
(25°C)
B-Constant
(25-50°C)
(K)
NCP03YS110p05RL
11ohm
2750 ±3%
9.50
100
1.0
-40 to 125
NCP03YS220p05RL
22ohm
2750 ±3%
6.70
100
1.0
-40 to 125
NCP03YS330p05RL
33ohm
2750 ±3%
5.50
100
1.0
-40 to 125
NCP03YS470p05RL
47ohm
2750 ±3%
4.60
100
1.0
-40 to 125
NCP03YS680p05RL
68ohm
2750 ±3%
3.80
100
1.0
-40 to 125
NCP03YS101p05RL
100ohm
2750 ±3%
3.10
100
1.0
-40 to 125
NCP03XH682p05RL
6.8k ohm
3380 ±3%
0.38
100
1.0
-40 to 125
NCP03XH103p05RL
10k ohm
3380 ±3%
0.31
100
1.0
-40 to 125
NCP03XH153p05RL
15k ohm
3380 ±3%
0.25
100
1.0
-40 to 125
NCP03XH223p05RL
22k ohm
3380 ±3%
0.21
100
1.0
-40 to 125
NCP03WF333p05RL
33k ohm
4250 ±3%
0.17
100
1.0
-40 to 125
NCP03WB473p05RL
47k ohm
4050 ±3%
0.14
100
1.0
-40 to 125
NCP03WL473p05RL
47k ohm
4485 ±3%
0.14
100
1.0
-40 to 125
NCP03WF683p05RL
68k ohm
4250 ±3%
0.12
100
1.0
-40 to 125
NCP03WL683p05RL
68k ohm
4485 ±3%
0.12
100
1.0
-40 to 125
NCP03WF104p05RL
100k ohm
4250 ±3%
0.10
100
1.0
-40 to 125
NCP03WL104p05RL
100k ohm
4485 ±3%
0.10
100
1.0
-40 to 125
NCP03WL154p05RL
150k ohm
4485 ±3%
0.08
100
1.0
-40 to 125
NCP03WL224p05RL
220k ohm
4485 ±3%
0.06
100
1.0
-40 to 125
Part Number
A blank column is filled with resistance tolerance codes. (J: ±5%, K: ±10%)
6
Permissive Operating Rated Electric Typical Dissipation
Current (25°C)
Power (25°C)
Constant (25°C)
(mA)
(mW)
(mW/°C)
Operating
Temperature Range
(°C)
catalog
to prevent
smoking
and/or
burning,
Pleaseread
readrating
ratingand
and!CAUTION
!CAUTION(for
(forstorage,
storage,operating,
operating,rating,
rating,soldering,
soldering,mounting
mountingand
andhandling)
handling)ininthis
thisPDF
catalog
to prevent
smoking
and/or
burning,
etc. etc.
!Note •Please
R44E9.pdf 05.4.13
you are
requested
approvespecifications.
our product specifications
or to transact
approval
for product
before ordering.
•This
Thiscatalog
cataloghas
hasonly
onlytypical
typicalspecifications.
specificationsTherefore,
because there
is no
space fortodetailed
Therefore, please
approvethe
our
productsheet
specifications
or specifications
transact the approval
sheet for product specifications before ordering.
■ Standard Land Dimensions
1
Solder Resist
c
Chip
b
Land
a
Soldering Methods
a
b
c
Reflow Soldering
0.25
0.25
0.3
(in mm)
7
R44E9.pdf 05.4.13
catalog
to prevent
smoking
and/or
burning,
Pleaseread
readrating
ratingand
and!CAUTION
!CAUTION(for
(forstorage,
storage,operating,
operating,rating,
rating,soldering,
soldering,mounting
mountingand
andhandling)
handling)ininthis
thisPDF
catalog
to prevent
smoking
and/or
burning,
etc. etc.
!Note •Please
you are
requested
approvespecifications.
our product specifications
or to transact
approval
for product
before ordering.
•This
Thiscatalog
cataloghas
hasonly
onlytypical
typicalspecifications.
specificationsTherefore,
because there
is no
space fortodetailed
Therefore, please
approvethe
our
productsheet
specifications
or specifications
transact the approval
sheet for product specifications before ordering.
NTC Thermistors
for Temperature Compensation 0402 (1005) Size
0.5±0.05
0201/0402/0603/0805 sized Chip NTC Thermistors have Ni
barrier termination and provide excellent
solderability and offer high stability in environment
by unique inner construction.
0.25±0.10
0.25±0.10
1.0±0.05
■ Features
1. Excellent solderability and high stability in
environment
2. Excellent long time aging stability
3. High accuracy in resistance and B-constant
4. Reflow soldering possible
5. Same B-constant in the same resistance in the three
sizes (0805/0603/0402)
Easy to use smaller size in the circuits
6. Lead is not contained in the product.
7. NCP15/18/21 series are recognized by UL
(UL1434, File No. E137188 Vol. 2, Sec. 2)
0.5±0.05
2
Electrode
(Ag Alloy + Ni Plating + Sn Plating)
(in mm)
■ Applications
1. Temperature compensation of transistor, IC, crystal
oscillator of mobile communications equipment
2. Temperature sensor for rechargeable batteries
3. Temperature compensation of LCD
4. Temperature compensation and sensing of car audio
equipment (CD, MD, Tuner)
5. Temperature compensation of several kinds of
circuits
Resistance
(25°C)
B-Constant
(25-50°C)
(K)
NCP15XC220p03RC
22ohm
3100 ±3%
6.70
100
1.0
-40 to 125
NCP15XC330p03RC
33ohm
3100 ±3%
5.50
100
1.0
-40 to 125
NCP15XC470p03RC
47ohm
3100 ±3%
4.60
100
1.0
-40 to 125
NCP15XC680p03RC
68ohm
3100 ±3%
3.80
100
1.0
-40 to 125
NCP15XF101p03RC
100ohm
3250 ±3%
3.10
100
1.0
-40 to 125
NCP15XF151p03RC
150ohm
3250 ±3%
2.50
100
1.0
-40 to 125
NCP15XM221p03RC
220ohm
3500 ±3%
2.10
100
1.0
-40 to 125
NCP15XM331p03RC
330ohm
3500 ±3%
1.70
100
1.0
-40 to 125
NCP15XQ471p03RC
470ohm
3650 ±2%
1.40
100
1.0
-40 to 125
NCP15XQ681p03RC
680ohm
3650 ±3%
1.20
100
1.0
-40 to 125
NCP15XQ102p03RC
1.0k ohm
3650 ±2%
1.00
100
1.0
-40 to 125
NCP15XW152p03RC
1.5k ohm
3950 ±3%
0.81
100
1.0
-40 to 125
NCP15XW222p03RC
2.2k ohm
3950 ±3%
0.67
100
1.0
-40 to 125
NCP15XW332p03RC
3.3k ohm
3950 ±3%
0.55
100
1.0
-40 to 125
NCP15XM472p03RC
4.7k ohm
3500 ±2%
0.46
100
1.0
-40 to 125
NCP15XW682p03RC
6.8k ohm
3950 ±3%
0.38
100
1.0
-40 to 125
NCP15XH103p03RC
10k ohm
3380 ±1%
0.31
100
1.0
-40 to 125
NCP15XV103p03RC
10k ohm
3900 ±3%
0.31
100
1.0
-40 to 125
NCP15XW153p03RC
15k ohm
3950 ±3%
0.25
100
1.0
-40 to 125
NCP15XW223p03RC
22k ohm
3950 ±3%
0.21
100
1.0
-40 to 125
NCP15WL223p03RC
22k ohm
4485 ±1%
0.21
100
1.0
-40 to 125
NCP15WB333p03RC
33k ohm
4050 ±3%
0.17
100
1.0
-40 to 125
Part Number
Permissive Operating Rated Electric Typical Dissipation
Current (25°C)
Power (25°C)
Constant (25°C)
(mA)
(mW)
(mW/°C)
Operating
Temperature Range
(°C)
Continued on the following page.
8
R44E9.pdf 05.4.13
catalog
to prevent
smoking
and/or
burning,
Pleaseread
readrating
ratingand
and!CAUTION
!CAUTION(for
(forstorage,
storage,operating,
operating,rating,
rating,soldering,
soldering,mounting
mountingand
andhandling)
handling)ininthis
thisPDF
catalog
to prevent
smoking
and/or
burning,
etc. etc.
!Note •Please
you are
requested
approvespecifications.
our product specifications
or to transact
approval
for product
before ordering.
•This
Thiscatalog
cataloghas
hasonly
onlytypical
typicalspecifications.
specificationsTherefore,
because there
is no
space fortodetailed
Therefore, please
approvethe
our
productsheet
specifications
or specifications
transact the approval
sheet for product specifications before ordering.
Continued from the preceding page.
Resistance
(25°C)
B-Constant
(25-50°C)
(K)
NCP15WL333p03RC
33k ohm
4485 ±1%
0.17
100
1.0
-40 to 125
NCP15WB473p03RC
47k ohm
4050 ±1%
0.14
100
1.0
-40 to 125
NCP15WL473p03RC
47k ohm
4485 ±1%
0.14
100
1.0
-40 to 125
NCP15WD683p03RC
68k ohm
4150 ±3%
0.12
100
1.0
-40 to 125
NCP15WL683p03RC
68k ohm
4485 ±1%
0.12
100
1.0
-40 to 125
NCP15WF104p03RC
100k ohm
4250 ±1%
0.10
100
1.0
-40 to 125
NCP15WL104p03RC
100k ohm
4485 ±1%
0.10
100
1.0
-40 to 125
NCP15WM154p03RC
150k ohm
4500 ±3%
0.08
100
1.0
-40 to 125
NCP15WL154p03RC
154k ohm
4485 ±1%
0.08
100
1.0
-40 to 125
NCP15WM224p03RC
220k ohm
4500 ±3%
0.06
100
1.0
-40 to 125
NCP15WM474p03RC
470k ohm
4500 ±3%
0.04
100
1.0
-40 to 125
Part Number
Permissive Operating Rated Electric Typical Dissipation
Current (25°C)
Power (25°C)
Constant (25°C)
(mA)
(mW)
(mW/°C)
Operating
Temperature Range
(°C)
2
A blank column is filled with resistance tolerance codes. (J: ±5%, K: ±10%)
Tolerance ±1% is also available for the following type.
10k ohm: NCP15XH103F03RC
47k ohm: NCP15WB473F03RC
100k ohm: NCP15WF104F03RC
■ Standard Land Dimensions
Solder Resist
c
Chip
b
Land
a
Soldering Methods
a
b
c
Reflow Soldering
0.4
0.4−0.5
0.5
(in mm)
9
R44E9.pdf 05.4.13
catalog
to prevent
smoking
and/or
burning,
Pleaseread
readrating
ratingand
and!CAUTION
!CAUTION(for
(forstorage,
storage,operating,
operating,rating,
rating,soldering,
soldering,mounting
mountingand
andhandling)
handling)ininthis
thisPDF
catalog
to prevent
smoking
and/or
burning,
etc. etc.
!Note •Please
you are
requested
approvespecifications.
our product specifications
or to transact
approval
for product
before ordering.
•This
Thiscatalog
cataloghas
hasonly
onlytypical
typicalspecifications.
specificationsTherefore,
because there
is no
space fortodetailed
Therefore, please
approvethe
our
productsheet
specifications
or specifications
transact the approval
sheet for product specifications before ordering.
NTC Thermistors
for Temperature Compensation 0603 (1608) Size
0.8±0.15
0201/0402/0603/0805 sized Chip NTC Thermistors have Ni
barrier termination and provide excellent
solderability and offer high stability in environment
by unique inner construction.
0.2—0.6
■ Features
1. Excellent solderability and high stability in
environment
2. Excellent long time aging stability
3. High accuracy in resistance and B-constant
4. Flow/Reflow soldering possible
5. Same B-constant in the same resistance in the three
sizes (0805/0603/0402)
Easy to use smaller size in the circuits
6. Lead is not contained in the product
7. NCP15/18/21 series are recognized by UL
(UL1434, File No. E137188 Vol. 2, Sec. 2)
0.8±0.15
3
0.2—0.6
1.6±0.15
Electrode
(Ag Alloy + Ni Plating + Sn Plating)
(in mm)
■ Applications
1. Temperature compensation of transistor, IC, crystal
oscillator of mobile communications equipment
2. Temperature sensor for rechargeable batteries
3. Temperature compensation of LCD
4. Temperature compensation and sensing of car audio
equipment (CD, MD, Tuner)
5. Temperature compensation of several kinds of
circuits
Resistance
(25°C)
B-Constant
(25-50°C)
(K)
NCP18XF101p03RB
100ohm
3250 ±3%
3.10
100
1.0
-40 to 125
NCP18XF151p03RB
150ohm
3250 ±3%
2.50
100
1.0
-40 to 125
NCP18XM221p03RB
220ohm
3500 ±3%
2.10
100
1.0
-40 to 125
NCP18XM331p03RB
330ohm
3500 ±3%
1.70
100
1.0
-40 to 125
NCP18XQ471p03RB
470ohm
3650 ±2%
1.40
100
1.0
-40 to 125
NCP18XQ681p03RB
680ohm
3650 ±3%
1.20
100
1.0
-40 to 125
NCP18XQ102p03RB
1.0k ohm
3650 ±2%
1.00
100
1.0
-40 to 125
NCP18XW152p03RB
1.5k ohm
3950 ±3%
0.81
100
1.0
-40 to 125
NCP18XW222p03RB
2.2k ohm
3950 ±3%
0.67
100
1.0
-40 to 125
NCP18XW332p03RB
3.3k ohm
3950 ±3%
0.55
100
1.0
-40 to 125
NCP18XM472p03RB
4.7k ohm
3500 ±2%
0.46
100
1.0
-40 to 125
NCP18XW682p03RB
6.8k ohm
3950 ±3%
0.38
100
1.0
-40 to 125
NCP18XH103p03RB
10k ohm
3380 ±1%
0.31
100
1.0
-40 to 125
NCP18XW153p03RB
15k ohm
3950 ±3%
0.25
100
1.0
-40 to 125
NCP18XW223p03RB
22k ohm
3950 ±3%
0.21
100
1.0
-40 to 125
NCP18WB333p03RB
33k ohm
4050 ±3%
0.17
100
1.0
-40 to 125
NCP18WB473p03RB
47k ohm
4050 ±2%
0.14
100
1.0
-40 to 125
NCP18WD683p03RB
68k ohm
4150 ±3%
0.12
100
1.0
-40 to 125
NCP18WF104p03RB
100k ohm
4250 ±2%
0.10
100
1.0
-40 to 125
NCP18WM154p03RB
150k ohm
4500 ±3%
0.08
100
1.0
-40 to 125
NCP18WM224p03RB
220k ohm
4500 ±3%
0.06
100
1.0
-40 to 125
NCP18WM474p03RB
470k ohm
4500 ±3%
0.04
100
1.0
-40 to 125
Part Number
A blank column is filled with resistance tolerance codes. (J: ±5%, K: ±10%)
Tolerance ±1% NCP18XH103F03RB is also availalbe for 10k ohm type.
10
Permissive Operating Rated Electric Typical Dissipation
Current (25°C)
Power (25°C)
Constant (25°C)
(mA)
(mW)
(mW/°C)
Operating
Temperature Range
(°C)
catalog
to prevent
smoking
and/or
burning,
Pleaseread
readrating
ratingand
and!CAUTION
!CAUTION(for
(forstorage,
storage,operating,
operating,rating,
rating,soldering,
soldering,mounting
mountingand
andhandling)
handling)ininthis
thisPDF
catalog
to prevent
smoking
and/or
burning,
etc. etc.
!Note •Please
R44E9.pdf 05.4.13
you are
requested
approvespecifications.
our product specifications
or to transact
approval
for product
before ordering.
•This
Thiscatalog
cataloghas
hasonly
onlytypical
typicalspecifications.
specificationsTherefore,
because there
is no
space fortodetailed
Therefore, please
approvethe
our
productsheet
specifications
or specifications
transact the approval
sheet for product specifications before ordering.
■ Standard Land Dimensions
c
Chip
b
Soldering Methods
Solder Resist
Land
a
a
b
c
Flow Soldering
0.6-1.0
0.8-0.9
0.6-0.8
Reflow Soldering
0.6-0.8
0.6-0.7
0.6-0.8
(in mm)
3
11
R44E9.pdf 05.4.13
catalog
to prevent
smoking
and/or
burning,
Pleaseread
readrating
ratingand
and!CAUTION
!CAUTION(for
(forstorage,
storage,operating,
operating,rating,
rating,soldering,
soldering,mounting
mountingand
andhandling)
handling)ininthis
thisPDF
catalog
to prevent
smoking
and/or
burning,
etc. etc.
!Note •Please
you are
requested
approvespecifications.
our product specifications
or to transact
approval
for product
before ordering.
•This
Thiscatalog
cataloghas
hasonly
onlytypical
typicalspecifications.
specificationsTherefore,
because there
is no
space fortodetailed
Therefore, please
approvethe
our
productsheet
specifications
or specifications
transact the approval
sheet for product specifications before ordering.
NTC Thermistors
1.25±0.2
for Temperature Compensation 0805 (2012) Size
0201/0402/0603/0805 sized Chip NTC Thermistors have Ni
barrier termination and provide excellent
solderability and offer high stability in environment
by unique inner construction.
0.2—0.7
2.0±0.2
■ Features
4
0.2—0.7
0.85±0.15
1. Excellent solderability and high stability in
environment
2. Excellent long time aging stability
3. High accuracy in resistance and B-constant
4. Flow/Reflow soldering possible
5. Same B-constant in the same resistance in the three
sizes (0805/0603/0402)
Easy to use smaller size in the circuits
6. Lead is not contained in the product
7. NCP15/18/21 series are recognized by UL
(UL1434, File No. E137188 Vol. 2, Sec. 2)
Electrode
(Ag Alloy + Ni Plating + Sn Plating)
(in mm)
■ Applications
1. Temperature compensation of transistor, IC, crystal
oscillator of mobile communications equipment
2. Temperature sensor for rechargeable batteries
3. Temperature compensation of LCD
4. Temperature compensation and sensing of car audio
equipment (CD, MD, Tuner)
5. Temperature compensation of several kinds of
circuits
Resistance
(25°C)
B-Constant
(25-50°C)
(K)
220ohm
3500 ±3%
3.00
200
2.0
-40 to 125
NCP21XQ471p03RA
470ohm
3650 ±3%
2.00
200
2.0
-40 to 125
NCP21XQ102p03RA
1.0k ohm
3650 ±3%
1.40
200
2.0
-40 to 125
NCP21XW222p03RA
2.2k ohm
3950 ±3%
0.90
200
2.0
-40 to 125
NCP21XM472p03RA
4.7k ohm
3500 ±3%
0.65
200
2.0
-40 to 125
NCP21XV103p03RA
10k ohm
3900 ±3%
0.44
200
2.0
-40 to 125
NCP21XW153p03RA
15k ohm
3950 ±3%
0.36
200
2.0
-40 to 125
NCP21XW223p03RA
22k ohm
3950 ±3%
0.30
200
2.0
-40 to 125
NCP21WB333p03RA
33k ohm
4050 ±3%
0.24
200
2.0
-40 to 125
NCP21WB473p03RA
47k ohm
4050 ±3%
0.20
200
2.0
-40 to 125
NCP21WF104p03RA
100k ohm
4250 ±3%
0.14
200
2.0
-40 to 125
Part Number
NCP21XM221p03RA
A blank column is filled with resistance tolerance codes. (J: ±5%, K: ±10%)
12
Permissive Operating Rated Electric Typical Dissipation
Current (25°C)
Power (25°C)
Constant (25°C)
(mA)
(mW)
(mW/°C)
Operating
Temperature Range
(°C)
catalog
to prevent
smoking
and/or
burning,
Pleaseread
readrating
ratingand
and!CAUTION
!CAUTION(for
(forstorage,
storage,operating,
operating,rating,
rating,soldering,
soldering,mounting
mountingand
andhandling)
handling)ininthis
thisPDF
catalog
to prevent
smoking
and/or
burning,
etc. etc.
!Note •Please
R44E9.pdf 05.4.13
you are
requested
approvespecifications.
our product specifications
or to transact
approval
for product
before ordering.
•This
Thiscatalog
cataloghas
hasonly
onlytypical
typicalspecifications.
specificationsTherefore,
because there
is no
space fortodetailed
Therefore, please
approvethe
our
productsheet
specifications
or specifications
transact the approval
sheet for product specifications before ordering.
■ Standard Land Dimensions
c
Chip
b
Soldering Methods
Solder Resist
Land
a
a
b
c
Flow Soldering
1.0-1.1
0.9-1.0
1.0-1.2
Reflow Soldering
1.0-1.1
0.6-0.7
1.0-1.2
(in mm)
4
13
catalog
to prevent
smoking
and/or
burning,
Pleaseread
readrating
ratingand
and!CAUTION
!CAUTION(for
(forstorage,
storage,operating,
operating,rating,
rating,soldering,
soldering,mounting
mountingand
andhandling)
handling)ininthis
thisPDF
catalog
to prevent
smoking
and/or
burning,
etc. etc.
!Note •Please
R44E9.pdf 05.4.13
you are
requested
approvespecifications.
our product specifications
or to transact
approval
for product
before ordering.
•This
Thiscatalog
cataloghas
hasonly
onlytypical
typicalspecifications.
specificationsTherefore,
because there
is no
space fortodetailed
Therefore, please
approvethe
our
productsheet
specifications
or specifications
transact the approval
sheet for product specifications before ordering.
for Temperature Compensation Temperature Characteristics (Center Value)
4
Part Number NCPppYS110 NCPppYS220 NCPppXC220 NCPppYS330 NCPppXC330 NCPppYS470 NCPppXC470 NCPppYS680
Resistance
11Ω
22Ω
22Ω
33Ω
33Ω
47Ω
47Ω
68Ω
B-Constant
2750K
2750K
3100K
2750K
3100K
2750K
3100K
2750K
Temp. (°C) Resistance (Ω) Resistance (Ω) Resistance (Ω) Resistance (Ω) Resistance (Ω) Resistance (Ω) Resistance (Ω) Resistance (Ω)
254.732
355.823
382.098
533.734
544.201
760.166
787.354
Y40
127.366
Y35
101.662
203.325
273.975
304.987
410.962
434.376
585.310
628.459
81.726
163.452
213.003
245.178
319.504
349.193
455.051
505.215
Y30
Y25
66.148
132.296
166.943
198.444
250.415
282.633
356.652
408.915
53.946
107.893
131.997
161.839
197.996
230.498
281.994
333.487
Y20
88.546
Y15
44.273
105.318
132.819
157.978
189.167
224.998
273.688
Y10
36.494
72.987
84.670
109.481
127.005
155.927
180.886
225.597
30.262
60.523
68.628
90.785
102.942
129.299
146.614
187.071
Y5
0
25.226
50.451
55.981
75.677
83.972
107.782
119.596
155.940
21.150
42.300
45.859
63.449
68.789
90.367
97.972
130.744
5
17.828
35.657
37.819
53.485
56.728
76.176
80.794
110.212
10
15.103
30.205
31.396
45.308
47.094
64.529
67.073
93.361
15
12.859
25.719
26.211
38.578
39.317
54.944
55.997
79.494
20
25
11.000
22.000
22.000
33.000
33.000
47.000
47.000
68.000
30
9.452
18.904
18.560
28.356
27.840
40.386
39.651
58.430
8.162
16.323
15.735
24.485
23.603
34.872
33.616
50.454
35
40
7.077
14.155
13.403
21.232
20.104
30.239
28.633
43.750
6.161
12.323
11.462
18.484
17.193
26.326
24.487
38.089
45
5.389
10.778
9.842
16.167
14.763
23.025
21.026
33.313
50
55
4.731
9.461
8.488
14.192
12.732
20.213
18.133
29.244
60
4.168
8.336
7.348
12.504
11.022
17.809
15.698
25.766
3.687
7.374
6.399
11.061
9.598
15.753
13.670
22.792
65
3.273
6.545
5.595
9.817
8.392
13.982
11.952
20.230
70
75
2.915
5.830
4.896
8.744
7.345
12.454
10.461
18.019
2.605
5.210
4.299
7.814
6.448
11.130
9.184
16.102
80
2.335
4.671
3.795
7.006
5.692
9.979
8.107
14.437
85
90
2.100
4.201
3.360
6.301
5.040
8.974
7.179
12.984
1.894
3.789
2.983
5.683
4.474
8.094
6.373
11.710
95
1.713
3.427
2.656
5.140
3.983
7.320
5.673
10.591
100
1.554
3.107
2.367
4.661
3.551
6.638
5.057
9.604
105
110
1.412
2.825
2.116
4.237
3.173
6.035
4.520
8.731
1.287
2.574
1.901
3.862
2.851
5.500
4.060
7.957
115
1.176
2.352
1.712
3.528
2.568
5.024
3.657
7.269
120
125
1.077
2.153
1.543
3.230
2.314
4.600
3.296
6.655
Part Number NCPppXC680 NCPppYS101 NCPppXF101 NCPppXF151 NCPppXM221 NCPppXM331 NCPppXQ471 NCPppXQ681
Resistance
68Ω
100Ω
100Ω
150Ω
220Ω
330Ω
470Ω
680Ω
B-Constant
3100K
2750K
3250K
3250K
3500K
3500K
3650K
3650K
Temp. (°C) Resistance (Ω) Resistance (Ω) Resistance (Ω) Resistance (Ω) Resistance (Ω) Resistance (Ω) Resistance (Ω) Resistance (Ω)
1157.874
1824.175
2736.262
4947.904
7421.856
11822.473
17104.854
Y40
1099.815
Y35
846.832
924.204
1390.685
2086.028
3703.755
5555.632
8767.745
12685.248
Y30
658.372
742.963
1070.653
1605.979
2798.873
4198.309
6570.224
9505.855
Y25
516.007
601.346
831.138
1246.708
2135.887
3203.831
4971.784
7193.219
490.422
650.960
976.440
1645.037
2467.555
3796.933
5493.436
Y20
407.991
402.482
514.441
771.661
1278.034
1917.051
2923.400
4229.599
Y15
325.529
Y10
261.707
331.760
409.700
614.550
1000.620
1500.930
2269.599
3283.675
Y5
212.123
275.105
328.877
493.315
789.612
1184.418
1775.225
2568.411
229.324
265.759
398.639
627.752
941.628
1399.050
2024.158
0
173.033
192.270
215.785
323.677
502.474
753.711
1110.220
1606.275
5
141.747
162.076
176.395
264.592
405.010
607.514
887.257
1283.691
10
116.894
15
97.042
137.296
145.161
217.742
328.480
492.720
713.463
1032.245
20
81.016
116.902
120.152
180.228
268.044
402.066
577.375
835.351
100.000
100.000
150.000
220.000
330.000
470.000
680.000
25
68.000
85.927
83.669
125.503
181.576
272.365
384.800
556.733
30
57.368
35
48.636
74.197
70.361
105.541
150.668
226.002
316.757
458.287
64.339
59.456
89.184
125.681
188.521
262.177
379.320
40
41.426
45
35.428
56.013
50.470
75.705
105.336
158.004
218.069
315.504
50
30.421
48.989
43.029
64.543
88.717
133.076
182.297
263.749
55
26.235
43.006
36.830
55.246
75.059
112.588
153.150
221.579
37.891
31.649
47.473
63.777
95.666
129.249
186.998
60
22.712
65
19.778
33.517
27.364
41.045
54.415
81.622
109.551
158.499
29.750
23.756
35.634
46.631
69.946
93.281
134.960
70
17.293
26.498
20.651
30.976
40.115
60.172
79.750
115.383
75
15.134
80
13.288
23.680
18.011
27.016
34.637
51.955
68.446
99.029
85
11.729
21.231
15.800
23.700
30.013
45.019
58.996
85.356
90
10.386
19.094
13.908
20.862
26.110
39.165
51.036
73.839
95
9.220
17.221
12.263
18.394
22.790
34.186
44.332
64.140
15.575
10.844
16.265
19.957
29.935
38.640
55.905
100
8.208
105
7.317
14.124
9.622
14.434
17.541
26.312
33.790
48.888
110
6.539
12.840
8.563
12.844
15.453
23.180
29.664
42.918
11.702
7.648
11.472
13.663
20.494
26.123
37.795
115
5.874
120
5.291
10.690
6.850
10.275
12.114
18.171
23.091
33.409
125
4.768
9.787
6.162
9.243
10.778
16.168
20.472
29.618
Continued on the following page.
14
1
catalog
to prevent
smoking
and/or
burning,
Pleaseread
readrating
ratingand
and!CAUTION
!CAUTION(for
(forstorage,
storage,operating,
operating,rating,
rating,soldering,
soldering,mounting
mountingand
andhandling)
handling)ininthis
thisPDF
catalog
to prevent
smoking
and/or
burning,
etc. etc.
!Note •Please
R44E9.pdf 05.4.13
you are
requested
approvespecifications.
our product specifications
or to transact
approval
for product
before ordering.
•This
Thiscatalog
cataloghas
hasonly
onlytypical
typicalspecifications.
specificationsTherefore,
because there
is no
space fortodetailed
Therefore, please
approvethe
our
productsheet
specifications
or specifications
transact the approval
sheet for product specifications before ordering.
for Temperature Compensation Temperature Characteristics (Center Value)
Continued from the preceding page.
Part Number NCPppXQ102 NCPppXW152 NCPppXW222 NCPppXW332 NCPppXM472 NCPppXH682 NCPppXW682 NCPppXH103
Resistance
1kΩ
1.5kΩ
2.2kΩ
3.3kΩ
4.7kΩ
6.8kΩ
6.8kΩ
10kΩ
B-Constant
3950K
3950K
3500K
3380K
3950K
3380K
3650K
3950K
Temp. (°C) Resistance (kΩ) Resistance (kΩ) Resistance (kΩ) Resistance (kΩ) Resistance (kΩ) Resistance (kΩ) Resistance (kΩ) Resistance (kΩ)
Y40
25.154
51.791
75.961
113.941
105.705
133.122
234.787
195.652
Y35
18.655
37.172
54.520
81.779
79.126
100.810
168.515
148.171
39.607
Y30
13.979
27.005
59.411
59.794
77.113
122.422
113.347
Y25
10.578
19.843
29.103
43.654
45.630
59.566
89.953
87.559
21.601
Y20
8.079
14.728
32.401
35.144
46.419
66.766
68.237
Y15
6.220
11.044
16.198
24.297
27.303
36.494
50.066
53.650
Y10
4.829
8.362
12.264
18.396
21.377
28.913
37.906
42.506
9.370
Y5
3.777
6.389
14.055
16.869
23.052
28.963
33.892
0
2.977
4.922
7.219
10.829
13.411
18.512
22.313
27.219
5.609
5
2.362
3.825
8.414
10.735
14.977
17.338
22.021
4.391
10
1.888
2.994
6.586
8.653
12.191
13.571
17.926
3.463
15
1.518
2.361
5.195
7.018
9.979
10.705
14.674
2.751
20
1.229
1.876
4.126
5.726
8.215
8.503
12.081
25
1.000
1.500
2.200
3.300
4.700
6.800
6.800
10.000
30
0.819
1.207
1.771
2.656
3.879
5.654
5.474
8.315
1.434
35
0.674
0.978
2.152
3.219
4.724
4.434
6.948
40
0.558
0.797
1.169
1.753
2.685
3.967
3.613
5.834
0.958
45
0.464
0.653
1.437
2.250
3.343
2.961
4.917
0.789
50
0.388
0.538
1.184
1.895
2.829
2.440
4.161
55
0.326
0.446
0.654
0.981
1.604
2.403
2.022
3.535
60
0.275
0.371
0.545
0.817
1.363
2.049
1.683
3.014
0.456
65
0.233
0.311
0.684
1.163
1.758
1.409
2.586
0.383
70
0.199
0.261
0.575
0.996
1.514
1.185
2.228
75
0.170
0.221
0.324
0.486
0.857
1.308
1.001
1.925
0.275
80
0.146
0.187
0.412
0.740
1.134
0.849
1.669
0.234
85
0.126
0.160
0.351
0.641
0.987
0.724
1.452
90
0.109
0.137
0.200
0.301
0.558
0.862
0.620
1.268
0.172
95
0.094
0.117
0.258
0.487
0.754
0.532
1.110
0.149
100
0.082
0.101
0.223
0.426
0.662
0.459
0.974
0.129
105
0.072
0.088
0.193
0.375
0.583
0.398
0.858
110
0.063
0.076
0.112
0.168
0.330
0.515
0.346
0.758
0.098
115
0.056
0.067
0.146
0.292
0.456
0.302
0.672
0.085
120
0.049
0.058
0.128
0.259
0.405
0.264
0.596
125
0.044
0.051
0.075
0.113
0.230
0.361
0.232
0.531
Part Number NCPppXV103 NCPppXH153 NCPppXW153 NCPppXH223 NCPppXW223 NCPppWL223 NCPppWB333 NCPppWF333
Resistance
10kΩ
15kΩ
15kΩ
22kΩ
22kΩ
22kΩ
33kΩ
33kΩ
B-Constant
3900K
3380K
3950K
3380K
3950K
4485K
4050K
4250K
Temp. (°C) Resistance (kΩ) Resistance (kΩ) Resistance (kΩ) Resistance (kΩ) Resistance (kΩ) Resistance (kΩ) Resistance (kΩ) Resistance (kΩ)
430.688
Y40
328.996
293.651
517.912
759.605
1073.436
1227.263
1451.049
Y35
237.387
222.375
371.724
326.150
545.196
753.900
874.449
1019.238
Y30
173.185
170.103
270.048
249.484
396.070
535.073
630.851
725.084
Y25
127.773
131.395
198.426
192.712
291.025
383.590
460.457
522.021
150.178
Y20
95.327
102.394
147.278
216.008
277.643
339.797
379.842
118.068
Y15
71.746
80.501
110.439
161.977
202.813
253.363
279.371
Y10
54.564
63.778
83.617
93.540
122.638
149.462
190.766
207.566
Y5
41.813
50.851
63.888
74.581
93.702
111.082
144.964
155.639
59.893
0
32.330
40.836
49.221
72.191
83.233
111.087
117.814
48.454
5
25.194
33.037
38.245
56.093
62.858
85.842
89.925
39.441
10
19.785
26.891
29.936
43.907
47.831
66.861
69.204
15
15.651
22.012
23.613
32.284
34.633
36.664
52.470
53.675
20
12.468
18.122
18.756
26.578
27.509
28.304
41.471
41.937
22.000
25
10.000
15.000
15.000
22.000
22.000
33.000
33.000
18.291
30
8.072
12.471
12.074
17.709
17.214
26.430
26.143
35
6.556
10.421
9.780
15.284
14.344
13.557
21.298
20.845
12.833
40
5.356
8.750
7.969
11.688
10.744
17.266
16.723
45
4.401
7.374
6.531
10.816
9.578
8.566
14.076
13.498
50
3.635
6.240
5.382
9.152
7.894
6.871
11.538
10.954
55
3.019
5.301
4.459
7.775
6.540
5.543
9.506
8.940
6.630
60
2.521
4.520
3.713
5.446
4.497
7.870
7.334
65
2.115
3.878
3.108
5.688
4.559
3.669
6.549
6.046
4.899
70
1.781
3.340
2.613
3.832
3.009
5.475
5.011
4.233
75
1.509
2.886
2.208
3.239
2.481
4.595
4.170
80
1.284
2.502
1.873
3.669
2.748
2.056
3.874
3.487
85
1.097
2.177
1.597
3.194
2.342
1.713
3.282
2.928
90
0.941
1.901
1.367
2.788
2.004
1.434
2.789
2.469
95
0.810
1.664
1.174
2.440
1.722
1.206
2.379
2.091
2.141
100
0.701
1.460
1.013
1.486
1.019
2.038
1.777
105
0.608
1.286
0.878
1.887
1.287
0.866
1.751
1.516
110
0.530
1.136
0.763
1.667
1.119
0.739
1.509
1.298
1.477
115
0.463
1.007
0.665
0.975
0.633
1.306
1.116
120
0.406
0.894
0.582
1.311
0.854
0.545
1.134
0.962
125
0.358
0.796
0.511
1.168
0.750
0.471
0.987
0.832
Continued on the following page.
2
15
4
catalog
to prevent
smoking
and/or
burning,
Pleaseread
readrating
ratingand
and!CAUTION
!CAUTION(for
(forstorage,
storage,operating,
operating,rating,
rating,soldering,
soldering,mounting
mountingand
andhandling)
handling)ininthis
thisPDF
catalog
to prevent
smoking
and/or
burning,
etc. etc.
!Note •Please
R44E9.pdf 05.4.13
you are
requested
approvespecifications.
our product specifications
or to transact
approval
for product
before ordering.
•This
Thiscatalog
cataloghas
hasonly
onlytypical
typicalspecifications.
specificationsTherefore,
because there
is no
space fortodetailed
Therefore, please
approvethe
our
productsheet
specifications
or specifications
transact the approval
sheet for product specifications before ordering.
for Temperature Compensation Temperature Characteristics (Center Value)
Continued from the preceding page.
4
Part Number NCPppWL333 NCPppWB473 NCPppWL473 NCPppWD683 NCPppWF683 NCPppWL683 NCPppWF104 NCPppWL104
Resistance
33kΩ
47kΩ
47kΩ
68kΩ
68kΩ
68kΩ
100kΩ
100kΩ
B-Constant
4250K
4485K
4250K∗
4485K
4485K
4050K
4485K
4150K
Temp. (°C) Resistance (kΩ) Resistance (kΩ) Resistance (kΩ) Resistance (kΩ) Resistance (kΩ) Resistance (kΩ) Resistance (kΩ) Resistance (kΩ)
Y40
1610.154
1747.920
2293.249
2735.359
2990.041
3317.893
4397.119
4879.254
Y35
1130.850
1245.428
1610.605
1937.391
2100.247
2330.237
3088.599
3426.818
1494.113
Y30
802.609
898.485
1143.110
1389.345
1653.862
2197.225
2432.149
Y25
575.385
655.802
819.487
1008.014
1075.679
1185.641
1581.881
1743.590
782.705
Y20
416.464
483.954
593.146
738.978
858.168
1151.037
1262.012
Y15
304.219
360.850
433.281
547.456
575.674
626.875
846.579
921.875
Y10
224.193
271.697
319.305
409.600
427.712
461.974
628.988
679.373
320.710
Y5
166.623
206.463
237.312
309.217
343.345
471.632
504.919
0
124.850
158.214
177.816
235.606
242.768
257.266
357.012
378.333
185.300
5
94.287
122.259
134.287
180.980
194.287
272.500
285.717
142.603
10
71.747
95.227
102.184
140.139
147.841
209.710
217.414
110.602
15
54.996
74.730
78.327
109.344
113.325
162.651
166.654
86.415
20
42.455
59.065
60.467
85.929
87.484
127.080
128.653
25
33.000
47.000
47.000
68.000
68.000
68.000
100.000
100.000
30
25.822
37.643
36.776
54.167
53.871
53.208
79.222
78.247
42.954
35
20.335
30.334
28.962
43.421
41.903
63.167
61.622
40
16.115
24.591
22.952
35.016
34.460
33.208
50.677
48.835
27.814
45
12.849
20.048
18.301
28.406
26.477
40.904
38.937
22.572
50
10.306
16.433
14.679
23.166
21.237
33.195
31.231
55
8.314
13.539
11.842
18.997
18.422
17.133
27.091
25.195
60
6.746
11.209
9.607
15.657
15.113
13.900
22.224
20.441
12.459
65
5.503
9.328
7.837
12.967
11.339
18.323
16.675
10.325
70
4.513
7.798
6.428
10.794
9.300
15.184
13.677
75
3.721
6.544
5.300
9.021
8.592
7.668
12.635
11.277
7.185
80
3.084
5.518
4.393
7.575
6.356
10.566
9.346
6.033
85
2.569
4.674
3.659
6.387
5.294
8.873
7.785
90
2.151
3.972
3.063
5.407
5.087
4.432
7.481
6.517
4.309
95
1.809
3.388
2.577
4.598
3.728
6.337
5.482
3.661
100
1.529
2.902
2.178
3.922
3.151
5.384
4.634
3.124
105
1.299
2.494
1.849
3.359
2.676
4.594
3.935
110
1.108
2.150
1.578
2.887
2.675
2.283
3.934
3.357
2.299
115
0.949
1.860
1.352
2.489
1.956
3.380
2.877
1.983
120
0.817
1.615
1.164
2.155
1.684
2.916
2.476
125
0.707
1.406
1.006
1.870
1.715
1.456
2.522
2.141
Part Number NCPppWL154 NCPppWM154 NCPppWL224 NCPppWM224 NCPppWM474
Resistance
150kΩ
150kΩ
220kΩ
220kΩ
470kΩ
B-Constant
4485K
4500K
4485K
4500K
4500K
Temp. (°C) Resistance (kΩ) Resistance (kΩ) Resistance (kΩ) Resistance (kΩ) Resistance (kΩ)
7318.881
Y40
7899.466
10734.358
11585.884
24751.661
5140.228
Y35
5466.118
7539.001
8016.973
17127.169
Y30
3648.224
3834.499
5350.729
5623.931
12014.762
Y25
2615.385
2720.523
3835.898
3990.100
8524.305
Y20
1893.018
1951.216
2776.427
2861.784
6113.811
1382.813
Y15
1415.565
2028.126
2076.162
4435.437
1019.059
Y10
1036.984
1494.620
1520.909
3249.216
757.379
Y5
767.079
1110.822
1125.049
2403.515
0
567.499
572.667
832.332
839.912
1794.358
5
428.575
431.264
628.577
632.521
1351.294
326.121
10
327.405
478.310
480.194
1025.870
249.981
15
250.538
366.639
367.455
785.018
20
192.979
193.166
283.036
283.310
605.252
25
150.000
150.000
220.000
220.000
470.000
30
117.370
117.281
172.143
172.012
367.480
92.433
35
92.293
135.569
135.364
289.186
40
73.252
73.090
107.436
107.198
229.014
58.406
45
58.240
85.662
85.419
182.485
46.846
50
46.665
68.708
68.441
146.215
55
37.793
37.605
55.429
55.153
117.828
60
30.661
30.453
44.970
44.665
95.420
25.013
65
24.804
36.686
36.379
77.718
20.516
70
20.293
30.090
29.763
63.584
75
16.916
16.679
24.810
24.462
52.260
14.019
80
13.776
20.562
20.205
43.166
11.678
85
11.428
17.128
16.761
35.808
90
9.776
9.520
14.338
13.962
29.828
8.223
95
7.966
12.061
11.684
24.961
6.951
100
6.688
10.194
9.809
20.955
5.902
105
5.639
8.657
8.270
17.668
110
5.035
4.772
7.385
6.998
14.951
4.315
115
4.052
6.329
5.942
12.695
3.714
120
3.454
5.448
5.067
10.824
125
3.211
2.955
4.710
4.334
9.259
∗ B-Constant of NCP18WF104F type is 4200K. Please contact us for the detail data.
16
3
catalog
to prevent
smoking
and/or
burning,
Pleaseread
readrating
ratingand
and!CAUTION
!CAUTION(for
(forstorage,
storage,operating,
operating,rating,
rating,soldering,
soldering,mounting
mountingand
andhandling)
handling)ininthis
thisPDF
catalog
to prevent
smoking
and/or
burning,
etc. etc.
!Note •Please
R44E9.pdf 05.4.13
you are
requested
approvespecifications.
our product specifications
or to transact
approval
for product
before ordering.
•This
Thiscatalog
cataloghas
hasonly
onlytypical
typicalspecifications.
specificationsTherefore,
because there
is no
space fortodetailed
Therefore, please
approvethe
our
productsheet
specifications
or specifications
transact the approval
sheet for product specifications before ordering.
Chip Type !Caution/Notice
■ !Caution (Storage and Operating Conditions)
This product is designed for application in an
ordinary environment (normal room temperature,
humidity and atmospheric pressure).
Do not use under the following conditions because all
these factors can deteriorate the product
characteristics or cause failures and burn-out.
1. Corrosive gas or deoxidizing gas
(Chlorine gas, Hydrogen sulfide gas, Ammonia gas,
Sulfuric acid gas, Nitric oxide gas, etc.)
2. Volatile or flammable gas
3. Dusty conditions
4. Under high or low pressure
5. Wet or humid locations
6. Places with salt water, oils, chemical liquids or
organic solvents
7. Strong vibrations
8. Other places where similar hazardous conditions
exist
■ !Caution (Others)
Be sure to provide an appropriate fail-safe function
on your product to prevent secondary damages that may
be caused by the abnormal function or the failure of
our product.
4
■ Notice (Storage and Operating Conditions)
To keep solderability of product from declining, the
following storage condition is recommended.
1. Storage condition:
Temperature -10 to +40 degree C
Humidity less than 75%RH (not dewing condition)
2. Storage term:
Use this product within 6 months after delivery by
first-in and first-out stocking system.
3. Handling after unpacking:
After unpacking, reseal product promptly or store
it in a sealed container with a drying agent.
4. Storage place:
Do not store this product in corrosive gas
(sulfuric acid gas, chlorine gas, etc.) or in
direct sunlight.
■ Notice (Rating)
Use this product within the specified temperature
range.
Higher temperature may cause deterioration of the
characteristics or the material quality of this
product.
■ Notice (Handling)
The ceramic of this product is fragile, and care must
be taken not to load a excessive press-force or not to
give a shock at handling.
Such forces may cause cracking or chipping.
17
R44E9.pdf 05.4.13
catalog
to prevent
smoking
and/or
burning,
Pleaseread
readrating
ratingand
and!CAUTION
!CAUTION(for
(forstorage,
storage,operating,
operating,rating,
rating,soldering,
soldering,mounting
mountingand
andhandling)
handling)ininthis
thisPDF
catalog
to prevent
smoking
and/or
burning,
etc. etc.
!Note •Please
you are
requested
approvespecifications.
our product specifications
or to transact
approval
for product
before ordering.
•This
Thiscatalog
cataloghas
hasonly
onlytypical
typicalspecifications.
specificationsTherefore,
because there
is no
space fortodetailed
Therefore, please
approvethe
our
productsheet
specifications
or specificaions
transact the approval
sheet for product specifications before ordering.
Chip Type !Caution/Notice
■ Notice (Soldering and Mounting)
1. Mounting Position
Choose a mounting position that minimizes the stress
imposed on the chip during flexing or bending of the
board.
[Component Direction]
Locate this
product
horizontal to the
direction in
which stress
acts.
[Mounting Close to Board Separation Line]
C
Perforation
Holes
A
D
Slit
Keep this product on the
PC Board away from the
Separation Line.
Worst ← A-C-B-D → Better
2. Reflow Soldering Conditions
(NCP03/NCP15 Series)
Allowable Reflow Soldering Temperature and Time
Standard Soldering Conditions
270
Temperature (°C)
Temperature (°C)
280
260
250
240
230
220
0
10
20
30 40 50
Time (sec.)
60
70
80
Soldering
1-2 min.
20sec. max.
Gradual Cooling
(in air)
200
100
0
90
Preheating (in air)
300
Preheating : 160±10°C, 1-2 min.
Soldering : 240-270°C, 20sec. max.
(NCP18/NCP21 Series)
Allowable Reflow Soldering Temperature and Time
Standard Soldering Conditions
280
270
Temperature (°C)
Temperature (°C)
260
250
240
230
220
Preheating (in air)
Soldering
1-2 min.
20sec. max.
300
Gradual Cooling
(in air)
200
100
0
210
0 10 20 30 40 50 60 70 80 90 100 110
Time (sec.)
Preheating : 160±10°C, 1-2 min.
Soldering : 230-270°C, 20sec. max.
3. Flow Soldering Conditions
(NCP18/NCP21 Series)
Allowable Flow Soldering Temperature and Time
Standard Soldering Conditions
280
Preheating (in air)
270
Temperature (°C)
Temperature (°C)
4
B
260
250
240
230
220
300
Soldering
Gradual Cooling
(in air)
200
100
0
210
0
10
20
Time (sec.)
30
1-2 min.
10sec. max.
Preheating : 160±10°C, 1-2 min.
Soldering : 230-260°C, 10sec. max.
Continued on the following page.
1
18
R44E9.pdf 05.4.13
catalog
to prevent
smoking
and/or
burning,
Pleaseread
readrating
ratingand
and!CAUTION
!CAUTION(for
(forstorage,
storage,operating,
operating,rating,
rating,soldering,
soldering,mounting
mountingand
andhandling)
handling)ininthis
thisPDF
catalog
to prevent
smoking
and/or
burning,
etc. etc.
!Note •Please
you are
requested
approvespecifications.
our product specifications
or to transact
approval
for product
before ordering.
•This
Thiscatalog
cataloghas
hasonly
onlytypical
typicalspecifications.
specificationsTherefore,
because there
is no
space fortodetailed
Therefore, please
approvethe
our
productsheet
specifications
or specifications
transact the approval
sheet for product specifications before ordering.
Chip Type !Caution/Notice
Continued from the preceding page.
4. Solder and Flux
(1) Solder and Paste
(a) Reflow Soldering : NCP03/15/18/21 Series
Use RA/RMA type or equivalent type of solder paste. For
your reference, we are using the solder paste below for
any internal tests of this product.
•RMA9086 90-4-M20 (Sn:Pb=63wt%:37wt%)
(Manufactured by Alpha Metals Japan Ltd.)
•M705-221BM5-42-11 (Sn:Ag:Cu=96.5wt%:3.0wt%:0.5wt%)
(Manufactured by Senju Metal Industry Co., Ltd.)
(b) Flow Soldering : NCP18/21 Series
We are using the solder paste below. For any internal
tests of this product.
•Sn : Pb=63wt%:37wt%
•Sn : Ag : Cu=96.5wt% : 3.0wt% : 0.5wt%
(2) Flux
Use Rosin-based flux.
Do not use strong acidic flux (with halide content
exceeding 0.2wt%)
5. Cleaning Conditions
For removing the flux after soldering, observe the following
points in order to avoid deterioration of the characteristics or
any change of the external electrodes' quality.
Solvent
NCP03/15
NCP18/21
Isopropyl Alcohol
Isopropyl Alcohol
Less than 5min. at room Less than 5min. at room
Dipping Cleaning
Ultrasonic Cleaning
temp. or less than 2min.
temp. or less than 2min.
at 40°C max.
at 40°C max.
Less than 5min. 20W/r
Less than 1min. 20W/r
Frequency of 28 to
Frequency of several
40kHz.
10kHz to 100kHz.
6. Drying
After cleaning, promptly dry this product.
7. Printing Conditions of Solder Paste
The amount of solder is critical. Standard height of fillet is
shown in the table below.
Too much soldering may cause mechanical stress,
resulting in cracking, mechanical and/or electronic
damage.
Reference: Optimum Solder Amount
E
T
Electrode
Solder
Solder
Part Number
The solder paste thickness
T
100µm
1/3EVTVE
NCP03
NCP15
100µm
1/3EVTVE
NCP18/NCP21
150µm
0.2mmVTVE
8. Adhesive Application and Curing
Thin or insufficient adhesive may result in loose
component contact with land during flow soldering.
Low viscosity adhesive causes chips to slip after
mounting.
2
19
4
R44E9.pdf 05.4.13
catalog
to prevent
smoking
and/or
burning,
Pleaseread
readrating
ratingand
and!CAUTION
!CAUTION(for
(forstorage,
storage,operating,
operating,rating,
rating,soldering,
soldering,mounting
mountingand
andhandling)
handling)ininthis
thisPDF
catalog
to prevent
smoking
and/or
burning,
etc. etc.
!Note •Please
you are
requested
approvespecifications.
our product specifications
or to transact
approval
for product
before ordering.
•This
Thiscatalog
cataloghas
hasonly
onlytypical
typicalspecifications.
specificationsTherefore,
because there
is no
space fortodetailed
Therefore, please
approvethe
our
productsheet
specifications
or specifications
transact the approval
sheet for product specifications before ordering.
Chip Type Package
Minimum Quantity Guide
Quantity (pcs.)
Part Number
Paper Tape
NCP03
15000
NCP15
10000
NCP18
4000
NCP21
-
Plastic Tape
4000
Tape Carrier Packaging
1. Dimensions of Reel
2.0±0.5
ø60 W1.0
Y0
ø13.0±0.2
ø21.0±0.8
4
9.0 W1.0
Y0
ø180 W0
Y1.5
13.0±1.0
(in mm)
2. Taping Method
(1) A tape in a reel contains Leader unit and Trailer unit where
products are not packed. (Please refer to the figure right.)
(2) The top and base tapes or, plastic and cover tape are not
Leader Unit
190-250
210-250
40 min.
Trailer Unit
Vacant Section Top Tape alone
Cover Tape alone
stuck at the first five pitches minimum.
(3) A label should be attached on the reel. (MURATA's part
Chip-mounting Unit
number, inspection number and quantity should be marked
on the label.)
(4) Taping reels are packed in a package.
Direction of Feed
(in mm)
Continued on the following page.
1
20
R44E9.pdf 05.4.13
catalog
to prevent
smoking
and/or
burning,
Pleaseread
readrating
ratingand
and!CAUTION
!CAUTION(for
(forstorage,
storage,operating,
operating,rating,
rating,soldering,
soldering,mounting
mountingand
andhandling)
handling)ininthis
thisPDF
catalog
to prevent
smoking
and/or
burning,
etc. etc.
!Note •Please
you are
requested
approvespecifications.
our product specifications
or to transact
approval
for product
before ordering.
•This
Thiscatalog
cataloghas
hasonly
onlytypical
typicalspecifications.
specificationsTherefore,
because there
is no
space fortodetailed
Therefore, please
approvethe
our
productsheet
specifications
or specifications
transact the approval
sheet for product specifications before ordering.
Chip Type Package
Continued from the preceding page.
3. Paper Tape (NCP03/15/18 Series)
NCP15 Series
8mm width 2mm pitch Tape
1.75±0.1
1.1 max
8.0±0.3
ø1.5+0.1/–0
1.85∗
8.0±0.3
1.15∗
2.0±0.05
4.0±0.1
4.0±0.1
0.8 max.
3.5±0.05
1.75±0.1
ø1.5+0.1/–0
3.5±0.05
2.0±0.05
4.0±0.1
NCP18 Series
8mm width 4mm pitch Tape
1.05∗
0.65∗
Direction of Feed
∗ Reference Value
Direction of Feed ∗ Reference Value
0.5 max
0.68∗
4
8.0±0.3
ø1.5+0.1/–0
3.5±0.05
2.0±0.05
4.0±0.1
1.75±0.1
NCP03 Series
0.38∗
Direction of Feed
∗ Reference Value
(in mm)
(1) Other Conditions
(a) Packaging
Products are packaged in the cavity of the base tape and
sealed by top tape and bottom tape.
(b) Tape
Top tape and bottom tape have no joints and products
are packaged and sealed in the cavity of the base tape,
continuously.
(2) Peeling force of top tape
165-180 °
F
∗ 1 Peeling angle : 165 to 180 degree against the fixed surface of tape.
∗ 2 Peeling speed : 300mm/min.
∗ 3 Peeling force : 0.1 - 0.6N
(3) Pull Strength
Pull strength of top tape is specified at 10N minimum.
Pull strength of bottom tape are specified 5N minimum.
Continued on the following page.
212
R44E9.pdf 05.4.13
catalog
to prevent
smoking
and/or
burning,
Pleaseread
readrating
ratingand
and!CAUTION
!CAUTION(for
(forstorage,
storage,operating,
operating,rating,
rating,soldering,
soldering,mounting
mountingand
andhandling)
handling)ininthis
thisPDF
catalog
to prevent
smoking
and/or
burning,
etc. etc.
!Note •Please
you are
requested
approvespecifications.
our product specifications
or to transact
approval
for product
before ordering.
•This
Thiscatalog
cataloghas
hasonly
onlytypical
typicalspecifications.
specificationsTherefore,
because there
is no
space fortodetailed
Therefore, please
approvethe
our
productsheet
specifications
or specifications
transact the approval
sheet for product specifications before ordering.
Chip Type Package
Continued from the preceding page.
4. Plastic Tape (NCP21 Series)
2.0±0.05
4.0±0.1
4.0±0.1
Products are packaged in the each embossed cavity of
plastic tape and sealed by cover tape.
+0.1
φ1.5 -1
2.25∗
Cover tape has no joints.
3.5±0.05
(b) Tape
φ1.0 +0.3
-0
1.05
0.2
8.0±0.3
(a) Packaging
1.75±0.1
(1) Other Conditions
1.45∗
∗ Reference Value
Direction of Feed
(in mm)
(2) Peeling force of cover tape
165-180 °
F
4
∗ 1 Peeling angle : 165 to 180 degree against the fixed surface of tape.
∗ 2 Peeling speed : 300mm/min.
∗ 3 Peeling force : 0.1 - 0.7N
(3) Tape Strength
Pull strength of plastic tape and cover tape shall be specified
10N minimum.
3
22
R44E9.pdf 05.4.13
catalog
to prevent
smoking
and/or
burning,
Pleaseread
readrating
ratingand
and!CAUTION
!CAUTION(for
(forstorage,
storage,operating,
operating,rating,
rating,soldering,
soldering,mounting
mountingand
andhandling)
handling)ininthis
thisPDF
catalog
to prevent
smoking
and/or
burning,
etc. etc.
!Note •Please
you are
requested
approvespecifications.
our product specifications
or to transact
approval
for product
before ordering.
•This
Thiscatalog
cataloghas
hasonly
onlytypical
typicalspecifications.
specificationsTherefore,
because there
is no
space fortodetailed
Therefore, please
approvethe
our
productsheet
specifications
or specifications
transact the approval
sheet for product specifications before ordering.
NTC Thermistors
for Temperature Sensor Lead Type
This product is a sensor type NTC Thermistor to be
useful in the normal temperature range developed by
the unique ceramic technology and the automatic
assembly.
1.8 max. (∗2.5 max.)
6.0 max.
3.0 max. (∗3.3 max.)
Epoxy Resin
31±1
■ Features
1. High-accuracy of +-1%
+-1% of resistance and B-Constant tolerance is
realized due to uniform thickness by the precise
sheet forming method.
2. Quick response
This product provides faster response time due
to its smaller size.
3. Taping type is available (Standard type).
4. Strong lead strength
Original lead-wiring technique assures reliable
connection. It can be formed and bent flexibly
according to the mounting conditions.
Solder Plated Copper Ply Wire
ø0.4±0.03
2.5±1.0
∗ It applies to NTSA0XM202, NTSA0WB203
and NTSA0WC303 Type.
(in mm)
■ Applications
5
1. Rechargeable batteries
2. Battery charging circuits
3. Head of printers
4. DC fan motors
5. Home appliance equipments
Resistance B-Constant Permissive Operating Rated Electric Typical Dissipation Thermal Time
Operating
(25°C)
(25-50°C)
Current (25°C)
Power (25°C) Constant (25°C)
Constant
Temperature Range
(k ohm)
(K)
(mA)
(mW)
(mW/°C)
(25°C)(s)
(°C)
Part Number
NTSA0XM202pE1B0
2.0
3500 ±1%
1.05
21
2.1
7
-40 to 125
NTSA0XR502pE1B0
5.0
3700 ±1%
0.68
21
2.1
7
-40 to 125
NTSA0XH103pE1B0
10
3380 ±1%
0.38
15
1.5
7
-40 to 125
NTSA0XV103pE1B0
10
3900 ±1%
0.46
21
2.1
7
-40 to 125
NTSA0WB203pE1B0
20
4050 ±1%
0.31
21
2.1
7
-40 to 125
NTSA0WC303pE1B0
30
4100 ±1%
0.26
21
2.1
7
-40 to 125
NTSA0WD503pE1B0
50
4150 ±1%
0.20
21
2.1
7
-40 to 125
NTSA0WF104pE1B0
100
4250 ±1%
0.14
21
2.1
7
-40 to 125
A blank column is filled with resistance tolerance codes. (F: ±1%, E: ±3%)
Taping type of part numbers with "N6A0" is available. (Lead spacing=5mm)
■ Temperature Tolerance-Temperature Characteristics
Resistance Tolerance +/-1% Type
Temperature Tolerance [±˚C]
3.0
2.0
1.0
-40
0
50
Temperature [˚C]
100
125
23
R44E9.pdf 05.4.13
catalog
to prevent
smoking
and/or
burning,
Pleaseread
readrating
ratingand
and!CAUTION
!CAUTION(for
(forstorage,
storage,operating,
operating,rating,
rating,soldering,
soldering,mounting
mountingand
andhandling)
handling)ininthis
thisPDF
catalog
to prevent
smoking
and/or
burning,
etc. etc.
!Note •Please
you are
requested
approvespecifications.
our product specifications
or to transact
approval
for product
before ordering.
•This
Thiscatalog
cataloghas
hasonly
onlytypical
typicalspecifications.
specificationsTherefore,
because there
is no
space fortodetailed
Therefore, please
approvethe
our
productsheet
specifications
or specificaions
transact the approval
sheet for product specifications before ordering.
NTC Thermistors
for Temperature Sensor Lead Insulation Type
3.0 max. (∗3.8 max.)
2.0 max. (∗2.5 max.)
1. Electric insulation on lead wire
2. Excellent bending resistance due to suitable
hardness of surface coating
3. Easy handling due to most suitable hardness of
surface of coating
4. High-accuracy of +-1%
+-1% of resistance and B-Constant tolerance are
realized due to uniform thickness by the precise
sheet forming method.
ø0.4±0.03
(Solder Plated
Copper Ply Wire)
NTSD0 Series
∗ It applies to NTSD0XM202, NTSD0WB203
and NTSD0WC303 Type.
3.0 max. (∗3.8 max.)
(in mm)
2.0 max. (∗2.5 max.)
Epoxy Resin
+1.5
2.5-0.5
1. Rechargeable batteries
2. Battery charging circuits
3. Head of printers
4. DC fan motors
5. Home appliance equipments
2.5±1.2
L ±2.0
ø0.46±0.03
Polyurethane Wire
■ Applications
6
0.60-0.95
3±1.5
2.5 −0.5
5±1
+1.5
■ Features
27.0±2.0
(Coating Area)
This product is a sensor type NTC Thermistor to be
useful in the normal temperature range developed by
the unique ceramic technology and the automatic
assembly.
ø0.45±0.03
Sn-3.5Ag Solder Copper Wire
∗ NTSD1XM202/NTSD1WB203/NTSD1WC303 Type
Type
NTSD1_FPB30
NTSD1_FPB40
NTSD1_FPB50
NTSD1 Series
(0.8)
(in mm)
L (mm)
30
40
50
NTSD0 Series
Part Number
Resistance B-Constant Permissive Operating Rated Electric Typical Dissipation Thermal Time
Operating
(25°C)
(25-50°C)
Current (25°C)
Power (25°C) Constant (25°C)
Constant
Temperature Range
(k ohm)
(K)
(mA)
(mW)
(mW/°C)
(25°C)(s)
(°C)
NTSD0XM202pE1B0
2.0
3500 ±1%
1.05
21
2.1
7
-40 to 125
NTSD0XR502pE1B0
5.0
3700 ±1%
0.68
21
2.1
7
-40 to 125
NTSD0XH103pE1B0
10
3380 ±1%
0.38
15
1.5
7
-40 to 125
NTSD0XV103pE1B0
10
3900 ±1%
0.46
21
2.1
7
-40 to 125
NTSD0WB203pE1B0
20
4050 ±1%
0.31
21
2.1
7
-40 to 125
NTSD0WC303pE1B0
30
4100 ±1%
0.26
21
2.1
7
-40 to 125
NTSD0WD503pE1B0
50
4150 ±1%
0.20
21
2.1
7
-40 to 125
NTSD0WF104pE1B0
100
4250 ±1%
0.14
21
2.1
7
-40 to 125
A blank column is filled with resistance tolerance codes. (F: ±1%, E: ±3%)
NTSD1 Series
Part Number
Resistance B-Constant Permissive Operating Rated Electric Typical Dissipation Thermal Time
Operating
(25°C)
(25-50°C)
Current (25°C)
Power (25°C) Constant (25°C)
Constant
Temperature Range
(k ohm)
(K)
(mA)
(mW)
(mW/°C)
(25°C)(s)
(°C)
NTSD1XM202FPBpp
2.0 ±1%
3500 ±1%
1.05
21
2.1
7
-40 to 125
NTSD1XR502FPBpp
5.0 ±1%
3700 ±1%
0.68
21
2.1
7
-40 to 125
NTSD1XH103FPBpp
10 ±1%
3380 ±1%
0.38
15
1.5
7
-40 to 125
NTSD1XV103FPBpp
10 ±1%
3900 ±1%
0.46
21
2.1
7
-40 to 125
NTSD1WB203FPBpp
20 ±1%
4050 ±1%
0.31
21
2.1
7
-40 to 125
NTSD1WC303FPBpp
30 ±1%
4100 ±1%
0.26
21
2.1
7
-40 to 125
NTSD1WD503FPBpp
50 ±1%
4150 ±1%
0.20
21
2.1
7
-40 to 125
NTSD1WF104FPBpp
100 ±1%
4250 ±1%
0.14
21
2.1
7
-40 to 125
A blank column is filled with Total-length codes. (30, 40, 50)
24
catalog
to prevent
smoking
and/or
burning,
Pleaseread
readrating
ratingand
and!CAUTION
!CAUTION(for
(forstorage,
storage,operating,
operating,rating,
rating,soldering,
soldering,mounting
mountingand
andhandling)
handling)ininthis
thisPDF
catalog
to prevent
smoking
and/or
burning,
etc. etc.
!Note •Please
R44E9.pdf 05.4.13
you are
requested
approvespecifications.
our product specifications
or to transact
approval
for product
before ordering.
•This
Thiscatalog
cataloghas
hasonly
onlytypical
typicalspecifications.
specificationsTherefore,
because there
is no
space fortodetailed
Therefore, please
approvethe
our
productsheet
specifications
or specifications
transact the approval
sheet for product specifications before ordering.
■ Temperature Tolerance-Temperature Characteristics
Resistance Tolerance +/-1% Type
Temperature Tolerance [±˚C]
3.0
2.0
1.0
-40
0
50
Temperature [˚C]
100
125
6
25
catalog
to prevent
smoking
and/or
burning,
Pleaseread
readrating
ratingand
and!CAUTION
!CAUTION(for
(forstorage,
storage,operating,
operating,rating,
rating,soldering,
soldering,mounting
mountingand
andhandling)
handling)ininthis
thisPDF
catalog
to prevent
smoking
and/or
burning,
etc. etc.
!Note •Please
R44E9.pdf 05.4.13
you are
requested
approvespecifications.
our product specifications
or to transact
approval
for product
before ordering.
•This
Thiscatalog
cataloghas
hasonly
onlytypical
typicalspecifications.
specificationsTherefore,
because there
is no
space fortodetailed
Therefore, please
approvethe
our
productsheet
specifications
or specifications
transact the approval
sheet for product specifications before ordering.
for Temperature Sensor Temperature Characteristics (Center Value)
Part Number NTSppXM202 NTSppXR502 NTSppXH103 NTSppXV103 NTSppWB203 NTSppWC303 NTSppWD503 NTSppWF104
Resistance
2.0kΩ
5.0kΩ
10kΩ
10kΩ
20kΩ
30kΩ
50kΩ
100kΩ
B-Constant
3500K
3700K
3380K
3900K
4050K
4100K
4150K
4250K
Temp. (°C) Resistance (kΩ) Resistance (kΩ) Resistance (kΩ) Resistance (kΩ) Resistance (kΩ) Resistance (kΩ) Resistance (kΩ) Resistance (kΩ)
347.808
123.484
195.652
1948.575
4256.752
Y40
44.657
733.007
1149.500
92.295
148.171
248.591
1387.289
3005.888
Y35
33.505
524.831
819.651
113.347
179.973
2148.514
25.388
69.614
591.391
999.456
Y30
380.184
131.832
52.860
87.559
728.895
1555.020
Y25
19.402
277.845
430.529
68.237
97.679
1137.312
14.961
40.480
316.870
537.039
Y20
205.260
73.119
31.275
53.650
399.167
839.314
Y15
11.644
153.642
236.337
24.339
42.506
55.301
299.469
625.338
Y10
9.133
116.016
177.842
33.892
42.257
469.127
7.198
19.154
134.630
226.186
Y5
88.125
32.582
15.148
27.219
172.393
355.224
0
5.716
67.522
102.816
22.021
25.324
272.045
4.571
11.964
79.183
132.857
5
52.168
19.847
3.682
9.520
17.926
61.460
103.089
209.803
10
40.617
7.624
14.674
15.679
80.430
162.713
2.987
48.045
15
31.847
12.081
12.478
127.117
2.437
6.160
37.834
63.201
20
25.151
10.000
5.000
10.000
50.000
100.000
25
2.000
20.000
30.000
8.315
8.068
79.215
30
1.651
4.082
16.014
23.955
39.825
6.552
1.371
3.354
6.948
19.249
31.918
63.150
35
12.902
5.353
2.773
5.834
25.733
50.649
40
1.143
10.457
15.560
2.299
4.917
4.399
20.877
40.885
0.958
12.657
45
8.527
4.161
3.635
33.195
0.807
1.914
10.354
17.034
50
6.993
3.020
1.607
3.535
13.929
27.014
55
0.683
5.771
8.525
2.521
3.014
22.079
60
0.582
1.356
4.789
7.058
11.439
2.586
2.115
18.226
0.497
1.149
5.869
9.485
65
3.992
1.783
0.426
0.978
2.228
4.905
7.906
15.124
70
3.343
1.510
0.834
1.925
6.614
2.598
75
0.367
2.809
4.113
0.714
1.669
1.284
5.558
10.542
0.318
3.463
80
2.371
1.452
1.096
8.852
0.276
0.612
2.945
4.686
85
2.020
0.939
0.527
1.268
3.967
7.463
90
0.240
1.729
2.516
1.110
0.808
6.321
0.210
0.456
2.143
3.373
95
1.476
0.183
0.396
0.974
0.698
1.832
2.878
5.374
100
1.264
0.858
0.605
4.585
0.161
0.345
1.571
2.465
105
1.085
0.527
0.758
3.925
110
0.142
0.302
0.935
1.350
2.118
0.460
0.125
0.264
0.671
1.171
1.828
3.376
115
0.812
0.232
0.596
0.403
1.583
2.913
0.111
1.019
120
0.708
0.531
0.354
2.520
0.205
1.374
125
0.099
0.617
0.886
6
26
1
catalog
to prevent
smoking
and/or
burning,
Pleaseread
readrating
ratingand
and!CAUTION
!CAUTION(for
(forstorage,
storage,operating,
operating,rating,
rating,soldering,
soldering,mounting
mountingand
andhandling)
handling)ininthis
thisPDF
catalog
to prevent
smoking
and/or
burning,
etc. etc.
!Note •Please
R44E9.pdf 05.4.13
you are
requested
approvespecifications.
our product specifications
or to transact
approval
for product
before ordering.
•This
Thiscatalog
cataloghas
hasonly
onlytypical
typicalspecifications.
specificationsTherefore,
because there
is no
space fortodetailed
Therefore, please
approvethe
our
productsheet
specifications
or specifications
transact the approval
sheet for product specifications before ordering.
for Temperature Sensor Lead Type/Lead Insulation Type !Caution/Notice
■ !Caution (Storage and Operating Conditions)
This product is designed for application in an
ordinary environment (normal room temperature,
humidity and atmospheric pressure).
Do not use under the following conditions because all
these factors can deteriorate the product
characteristics or cause failures and burn-out.
1. Corrosive gas or deoxidizing gas
(Chlorine gas, Hydrogen sulfide gas, Ammonia gas,
Sulfuric acid gas, Nitric oxide gas, etc.)
2. Volatile or flammable gas
3. Dusty conditions
4. Under high or low pressure
5. Wet or humid locations
6. Places with salt water, oils, chemical liquids or
organic solvents
7. Strong vibrations
8. Other places where similar hazardous conditions
exist
■ !Caution (Others)
Be sure to provide an appropriate fail-safe function
on your product to prevent secondary damages that may
be caused by the abnormal function or the failure of
our product.
■ Notice (Storage and Operating Conditions)
To keep solderability of product from declining, the
following storage condition is recommended.
1. Storage condition:
Temperature -10 to +40 degree C
Humidity less than 75%RH (not dewing condition)
2. Storage term:
Use this product within 6 months after delivery by
first-in and first-out stocking system.
3. Handling after unpacking:
After unpacking, reseal product promptly or store
it in a sealed container with a drying agent.
4. Storage place:
Do not store this product in corrosive gas
(sulfuric acid gas, chlorine gas, etc.) or in
direct sunlight.
6
■ Notice (Rating)
Use this product within the specified temperature
range.
Higher temperature may cause deterioration of the
characteristics or the material quality of this
product.
■ Notice (Soldering and Mounting)
■ Notice (Handling)
1. Be sure that the preheat-up does not melt the
soldering of this product. Excessive heat may
cause failure to open, short or insulation break
down.
2. Do not touch the body with soldering iron.
The soldering point should be min. 5mm away from
the root of lead wire.
1. The ceramic element of this product is fragile, and
care must be taken not to load an excessive
press-force or not to give a shock at handling.
Such forces may cause cracking or chipping.
2. Do not apply an excessive force to the lead.
Otherwise, it may cause junction between lead and
element to break or crack. Holding element by side
lead wire is recommended when lead wire is bent or
cut.
27
R44E9.pdf 05.4.13
catalog
to prevent
smoking
and/or
burning,
Pleaseread
readrating
ratingand
and!CAUTION
!CAUTION(for
(forstorage,
storage,operating,
operating,rating,
rating,soldering,
soldering,mounting
mountingand
andhandling)
handling)ininthis
thisPDF
catalog
to prevent
smoking
and/or
burning,
etc. etc.
!Note •Please
you are
requested
approvespecifications.
our product specifications
or to transact
approval
for product
before ordering.
•This
Thiscatalog
cataloghas
hasonly
onlytypical
typicalspecifications.
specificationsTherefore,
because there
is no
space fortodetailed
Therefore, please
approvethe
our
productsheet
specifications
or specifications
transact the approval
sheet for product specifications before ordering.
for Temperature Sensor Lead Type/Lead Insulation Type NTSA/NTSD Series Package
Minimum Quantity
Minimum Quantity (pcs.)
Part Number
Ammo Pack
Bulk
NTSA
3000
100
NTSD
-
100
Taping Dimensions (NTSA Series)
∆S
P
P2
∆h2
∆h1
T
D
e
H2
P1
ød
W2
F
H0
L
W0
W1
W
t2
I
P0
Item
6
t1
øD0
Code
Dimensions (mm)
Pitch of Component
P
12.7
Pitch of Sprocket Hole
P0
12.7±0.3
Lead Spacing
F
5.0+0.8/–0.2
Lead Length from Hole Center to Component Center
P2
6.35±1.3
Lead Length from Hole Center to Lead
P1
3.85±0.8
Body Diameter
D
3.5 max.
Deviation along Tape, Left or Right
∆S
0±2.0
Carrier Tape Width
W
18.0±0.5
Position of Sprocket Hole
W1
9.0±0.5
Lead Distance between Reference and Bottom Planes
H0
16.0±1.0
Height of Component
H2
4.0 max.
I
+0.5 to –1.0
Overflow of Lead
D0
4.0±0.1
Lead Diameter
d
0.50±0.03
Total Tape Thickness
t1
0.6±0.3
t2
1.6 max.
Diameter of Sprocket Hole
Total Thickness, Tape and Lead Wire
∆h1, ∆h2
1.0 max.
L
11.0+0/–2.0
Hole Down Tape Width
W0
11.0 min.
Hole Down Tape Position
W2
1.5±1.5
Coating Extension on Lead
e
Up to the crimp point
Thickness
T
2.6 max.
Deviation across Tape
Portion to Cut in Case of Defect
(in mm)
28
R44E9.pdf 05.4.13
catalog
to prevent
smoking
and/or
burning,
Pleaseread
readrating
ratingand
and!CAUTION
!CAUTION(for
(forstorage,
storage,operating,
operating,rating,
rating,soldering,
soldering,mounting
mountingand
andhandling)
handling)ininthis
thisPDF
catalog
to prevent
smoking
and/or
burning,
etc. etc.
!Note •Please
you are
requested
approvespecifications.
our product specifications
or to transact
approval
for product
before ordering.
•This
Thiscatalog
cataloghas
hasonly
onlytypical
typicalspecifications.
specificationsTherefore,
because there
is no
space fortodetailed
Therefore, please
approvethe
our
productsheet
specifications
or specifications
transact the approval
sheet for product specifications before ordering.
NTC Thermistors
for Inrush Current Suppression Lead Type
NTPAN : 23.0 max.
NTPAJ : 20.0 max.
5.5 max.
10.0 max.
This product effectively supresses surge currents
which are generated when switching power regulators
are turned on.
■ Features
Coating Extension
on Lead : to line A
1. Lead is not contained in the ceramic element, the
terminations, the solder for inner connection and
the coating resin.
2. Most suitable for power supplies of less than 100W
3. Excellent recovery characteristics due to resin
coating with excellent heat characteristics
4. Highly reliable
3.5±1.0
A
NTPAN/NTPAJ Series
ø0.8±0.05
Sn plated Cu wire
10.0±1.5
(in mm)
NTPAD : 16.0 max.
NTPAA : 12.0 max.
■ Applications
10.0 max.
1. Switching power supplies
2. CRT monitors
3. Color televisions
4. VCR-Power supplies
5. Other power circuits
5.5 max.
5.0 max.
Coating Extension
on Lead : to line A
3.5±1.0
A
NTPAD/NTPAA Series
ø0.8±0.05
Sn plated Cu wire
7.5±1.5
(in mm)
5.0 max.
6.0 max.
NTPA9 : 11.0 max.
NTPA7 : 9.0 max.
Coating Extension
on Lead : to line A
3.5±1.0
A
NTPA7/NTPA9 Series
7
ø0.6±0.05
Sn plated Cu wire
5.0±1.5
(in mm)
Resistance
(25°C)
(ohm)
Permissible Max.
Current (25°C)
(A)
Permissible Max.
Current (55°C)
(A)
NTPAN3R0LDKB0
3.0 ±15%
5.4
4.7
135
26.8
8600 at 100V
NTPAN4R0LDKB0
4.0 ±15%
4.7
4.1
130
26.8
8600 at 100V
NTPAN6R0LDKB0
6.0 ±15%
3.9
3.4
130
26.8
8600 at 100V
NTPAJ4R0LDKB0
4.0 ±15%
4.0
3.5
125
21.8
5000 at 100V
NTPAJ6R0LDKB0
6.0 ±15%
3.4
2.9
125
21.8
5000 at 100V
NTPAJ8R0LDKB0
8.0 ±15%
3.0
2.6
130
21.8
5000 at 100V
NTPAJ100LDKB0
10.0 ±15%
2.6
2.2
130
21.8
5000 at 100V
NTPAD3R9LDNB0
3.9 ±15%
3.3
2.9
65
18.2
2700 at 100V
NTPAD5R1LDNB0
5.1 ±15%
3.0
2.6
85
18.8
2700 at 100V
NTPAD8R0LDNB0
8.0 ±15%
2.7
2.3
65
18.7
2700 at 100V
NTPAD160LDNB0
16.0 ±15%
2.0
1.7
100
19.1
2700 at 100V
NTPAA2R2LDNB0
2.2 ±15%
3.7
3.2
70
13.5
1400 at 100V
Part Number
Thermal Dissipation
Thermal Time
Constant
Constant (25°C)(s)
(mW/°C)
Permissible
Electrolytic Capacitor
(µF)
Continued on the following page.
29
R44E9.pdf 05.4.13
catalog
to prevent
smoking
and/or
burning,
Pleaseread
readrating
ratingand
and!CAUTION
!CAUTION(for
(forstorage,
storage,operating,
operating,rating,
rating,soldering,
soldering,mounting
mountingand
andhandling)
handling)ininthis
thisPDF
catalog
to prevent
smoking
and/or
burning,
etc. etc.
!Note •Please
you are
requested
approvespecifications.
our product specifications
or to transact
approval
for product
before ordering.
•This
Thiscatalog
cataloghas
hasonly
onlytypical
typicalspecifications.
specificationsTherefore,
because there
is no
space fortodetailed
Therefore, please
approvethe
our
productsheet
specifications
or specifications
transact the approval
sheet for product specifications before ordering.
Continued from the preceding page.
Resistance
(25°C)
(ohm)
Permissible Max.
Current (25°C)
(A)
Permissible Max.
Current (55°C)
(A)
NTPAA3R9LDNB0
3.9 ±15%
2.7
2.3
70
13.5
1400 at 100V
NTPAA5R1LDNB0
5.1 ±15%
2.5
2.2
70
13.5
1400 at 100V
NTPAA8R2LDNB0
8.2 ±15%
2.0
1.7
70
13.5
1400 at 100V
NTPAA100LDNB0
10.0 ±15%
1.7
1.5
70
13.5
1400 at 100V
NTPA9160LBMB0
16.0 ±15%
1.4
1.2
65
11.6
800 at 100V
NTPA74R0LBMB0
4.0 ±15%
2.3
2.0
40
9.4
700 at 100V
NTPA78R0LBMB0
8.0 ±15%
1.7
1.5
40
9.5
570 at 100V
NTPA7160LBMB0
16.0 ±15%
1.2
1.0
40
9.9
400 at 100V
NTPA7220LBMB0
22.0 ±15%
1.0
0.88
40
9.1
400 at 100V
Part Number
Thermal Dissipation
Thermal Time
Constant
Constant (25°C)(s)
(mW/°C)
Permissible
Electrolytic Capacitor
(µF)
NTPAD/NTPAA/NTPA7 series are also availabe on tape.
■ Application Circuit
■ Determination of Allowable Current
1.0
−t˚
+
−
Max. Current Ratio
NTC
0.5
0
7
30
20
40
60
80
100
Ambient Temperature (˚C)
120
140
160
R44E9.pdf 05.4.13
catalog
to prevent
smoking
and/or
burning,
Pleaseread
readrating
ratingand
and!CAUTION
!CAUTION(for
(forstorage,
storage,operating,
operating,rating,
rating,soldering,
soldering,mounting
mountingand
andhandling)
handling)ininthis
thisPDF
catalog
to prevent
smoking
and/or
burning,
etc. etc.
!Note •Please
you are
requested
approvespecifications.
our product specifications
or to transact
approval
for product
before ordering.
•This
Thiscatalog
cataloghas
hasonly
onlytypical
typicalspecifications.
specificationsTherefore,
because there
is no
space fortodetailed
Therefore, please
approvethe
our
productsheet
specifications
or specifications
transact the approval
sheet for product specifications before ordering.
Current-R Ratio (RT/R25) / Current-Temperature Characteristics (Typical)
■ NTPAN3R0L Type
■ NTPAN4R0L Type
Ta=25˚C
Ta=25˚C
1
100
0.1
0.1
1
10
1
1
100
0.1
0.01
0.01
10
0.1
Current (A)
Current (A)
■ NTPAN6R0L Type
■ NTPAJ4R0L Type
Ta=25˚C
Ta=25˚C
1
100
0.1
10
0.1
1
10
1
1000
Resistance Ratio
Thermistor's Temperature (˚C)
Resistance Ratio (Rt/R25)
Resistance Ratio (Rt/R25)
Resistance Ratio
Thermistor's Temperature (˚C)
10
1
100
0.1
0.01
0.01
10
0.1
Current (A)
■ NTPAJ8R0L Type
Ta=25˚C
Ta=25˚C
1000
1
100
0.1
10
0.1
1
Current (A)
1
10
1000
Resistance Ratio
Thermistor's Temperature (˚C)
Resistance Ratio (Rt/R25)
Resistance Ratio
Thermistor's Temperature (˚C)
10
Thermistor's Temperature (˚C)
10
Resistance Ratio (Rt/R25)
1
10
1
Current (A)
■ NTPAJ6R0L Type
0.01
0.01
Thermistor's Temperature (˚C)
1000
Thermistor's Temperature (˚C)
10
0.01
0.01
1
10
1
1
100
0.1
0.01
0.01
10
0.1
1
Thermistor's Temperature (˚C)
0.01
0.01
10
1000
Resistance Ratio
Thermistor's Temperature (˚C)
Resistance Ratio (Rt/R25)
Resistance Ratio (Rt/R25)
Resistance Ratio
Thermistor's Temperature (˚C)
10
Thermistor's Temperature (˚C)
1000
Thermistor's Temperature (˚C)
10
1
10
Current (A)
Continued on the following page.
31
7
R44E9.pdf 05.4.13
catalog
to prevent
smoking
and/or
burning,
Pleaseread
readrating
ratingand
and!CAUTION
!CAUTION(for
(forstorage,
storage,operating,
operating,rating,
rating,soldering,
soldering,mounting
mountingand
andhandling)
handling)ininthis
thisPDF
catalog
to prevent
smoking
and/or
burning,
etc. etc.
!Note •Please
you are
requested
approvespecifications.
our product specifications
or to transact
approval
for product
before ordering.
•This
Thiscatalog
cataloghas
hasonly
onlytypical
typicalspecifications.
specificationsTherefore,
because there
is no
space fortodetailed
Therefore, please
approvethe
our
productsheet
specifications
or specifications
transact the approval
sheet for product specifications before ordering.
Current-R Ratio (RT/R25) / Current-Temperature Characteristics (Typical)
Continued from the preceding page.
■ NTPAJ100L Type
■ NTPAD3R9L Type
Ta=25˚C
Ta=25˚C
1
100
0.1
0.1
1
10
1
1
100
0.1
0.01
0.01
10
0.1
Current (A)
Current (A)
■ NTPAD5R1L Type
■ NTPAD8R0L Type
Ta=25˚C
Ta=25˚C
1
100
0.1
10
0.1
1
10
1
1000
Resistance Ratio
Thermistor's Temperature (˚C)
Resistance Ratio (Rt/R25)
Resistance Ratio (Rt/R25)
Resistance Ratio
Thermistor's Temperature (˚C)
10
1
100
0.1
0.01
0.01
10
0.1
Current (A)
■ NTPAA2R2L Type
Ta=25˚C
Ta=25˚C
1000
1
100
0.1
10
0.1
1
Current (A)
1
10
1000
Resistance Ratio
Thermistor's Temperature (˚C)
Resistance Ratio (Rt/R25)
Resistance Ratio (Rt/R25)
Resistance Ratio
Thermistor's Temperature (˚C)
10
Thermistor's Temperature (˚C)
10
0.01
0.01
1
10
1
Current (A)
■ NTPAD160L Type
7
1
100
0.1
0.01
0.01
10
0.1
1
1
10
Current (A)
Continued on the following page.
32
Thermistor's Temperature (˚C)
1000
Thermistor's Temperature (˚C)
10
0.01
0.01
1
10
1
Thermistor's Temperature (˚C)
0.01
0.01
10
1000
Resistance Ratio
Thermistor's Temperature (˚C)
Resistance Ratio (Rt/R25)
Resistance Ratio (Rt/R25)
Resistance Ratio
Thermistor's Temperature (˚C)
10
Thermistor's Temperature (˚C)
1000
Thermistor's Temperature (˚C)
10
R44E9.pdf 05.4.13
catalog
to prevent
smoking
and/or
burning,
Pleaseread
readrating
ratingand
and!CAUTION
!CAUTION(for
(forstorage,
storage,operating,
operating,rating,
rating,soldering,
soldering,mounting
mountingand
andhandling)
handling)ininthis
thisPDF
catalog
to prevent
smoking
and/or
burning,
etc. etc.
!Note •Please
you are
requested
approvespecifications.
our product specifications
or to transact
approval
for product
before ordering.
•This
Thiscatalog
cataloghas
hasonly
onlytypical
typicalspecifications.
specificationsTherefore,
because there
is no
space fortodetailed
Therefore, please
approvethe
our
productsheet
specifications
or specifications
transact the approval
sheet for product specifications before ordering.
Current-R Ratio (RT/R25) / Current-Temperature Characteristics (Typical)
Continued from the preceding page.
■ NTPAA3R9L Type
■ NTPAA5R1L Type
Ta=25˚C
Ta=25˚C
1000
100
0.1
10
0.01
0.01
0.1
1
10
1
1
Thermistor's Temperature (˚C)
1
1000
Resistance Ratio
Thermistor's Temperature (˚C)
Resistance Ratio (Rt/R25)
Resistance Ratio (Rt/R25)
Resistance Ratio
Thermistor's Temperature (˚C)
10
Thermistor's Temperature (˚C)
10
100
0.1
10
0.01
0.01
0.1
Current (A)
1
10
1
Current (A)
■ NTPAA8R2L Type
■ NTPAA100L Type
Ta=25˚C
1
100
0.1
10
0.01
0.01
0.1
1
100
0.1
0.01
0.01
1
10
1
1000
Resistance Ratio
Thermistor's Temperature
Resistance Ratio (Rt/R25)
Resistance Ratio (Rt/R25)
Resistance Ratio
Thermistor's Temperature (˚C)
Ta=25°C
10
10
Thermistor's temperature (°C)
1000
Thermistor's Temperature (˚C)
10
1
0.1
1
10
Current (A)
Current (A)
■ NTPA9160L Type
■ NTPA74R0L Type
Ta=25˚C
0.1
0.01
0.01
10
1
0.1
1
Current (A)
10
1
100
0.1
0.01
0.01
10
0.1
1
Thermistor's Temperature (˚C)
100
1000
Resistance Ratio
Thermistor's Temperature (˚C)
Resistance Ratio (Rt/R25)
Resistance Ratio (Rt/R25)
Resistance Ratio
Thermistor's Temperature
1
10
1000
Thermistor's temperature (°C)
Ta=25°C
10
1
10
Current (A)
Continued on the following page.
33
7
R44E9.pdf 05.4.13
catalog
to prevent
smoking
and/or
burning,
Pleaseread
readrating
ratingand
and!CAUTION
!CAUTION(for
(forstorage,
storage,operating,
operating,rating,
rating,soldering,
soldering,mounting
mountingand
andhandling)
handling)ininthis
thisPDF
catalog
to prevent
smoking
and/or
burning,
etc. etc.
!Note •Please
you are
requested
approvespecifications.
our product specifications
or to transact
approval
for product
before ordering.
•This
Thiscatalog
cataloghas
hasonly
onlytypical
typicalspecifications.
specificationsTherefore,
because there
is no
space fortodetailed
Therefore, please
approvethe
our
productsheet
specifications
or specifications
transact the approval
sheet for product specifications before ordering.
Current-R Ratio (RT/R25) / Current-Temperature Characteristics (Typical)
Continued from the preceding page.
■ NTPA78R0L Type
■ NTPA7160L Type
Ta=25˚C
Ta=25˚C
1
100
0.1
0.01
0.01
10
0.1
1
10
1
Ta=25˚C
1000
Resistance Ratio (Rt/R25)
Resistance Ratio
Thermistor's Temperature (˚C)
1
100
0.1
10
1
Current (A)
7
34
1
10
Thermistor's Temperature (˚C)
10
0.1
100
0.1
10
0.1
1
Current (A)
■ NTPA7220L Type
0.01
0.01
1
0.01
0.01
Current (A)
1000
Resistance Ratio
Thermistor's Temperature (˚C)
Resistance Ratio (Rt/R25)
Resistance Ratio (Rt/R25)
Resistance Ratio
Thermistor's Temperature (˚C)
10
1
10
Thermistor's Temperature (˚C)
1000
Thermistor's Temperature (˚C)
10
catalog
to prevent
smoking
and/or
burning,
Pleaseread
readrating
ratingand
and!CAUTION
!CAUTION(for
(forstorage,
storage,operating,
operating,rating,
rating,soldering,
soldering,mounting
mountingand
andhandling)
handling)ininthis
thisPDF
catalog
to prevent
smoking
and/or
burning,
etc. etc.
!Note •Please
R44E9.pdf 05.4.13
you are
requested
approvespecifications.
our product specifications
or to transact
approval
for product
before ordering.
•This
Thiscatalog
cataloghas
hasonly
onlytypical
typicalspecifications.
specificationsTherefore,
because there
is no
space fortodetailed
Therefore, please
approvethe
our
productsheet
specifications
or specifications
transact the approval
sheet for product specifications before ordering.
for Inrush Current Suppression Lead Type !Caution/Notice
■ !Caution (Storage and Operating Conditions)
1. This product is designed for the Switching Power
Supply with smoothing capacitors.
Other applications of this product may result in
fire.
2. Use this product within the specified maximum
current. Otherwise it may catch fire in the worst
case.
3. Use this product with smoothing capacitor within
the specified maximum capacitance value. Otherwise
it may catch fire in the worst case.
4. This product is designed for application in an
ordinary environment (normal room temperature,
humidity and atmospheric pressure).
Do not use under the following conditions because
all these factors can deteriorate the
product characteristics cause failure and burn-out.
(1) Corrosive gas or deoxidizing gas.
(Chlorine gas, Hydrogen sulfide gas, Ammonia
gas, Sulfuric acid gas, Nitric oxide gas, etc.)
(2) Volatile or flammable gas
(3) Dusty conditions
(4) Under high or low pressure
(5) Wet or humid conditions
(6) Near with salt water, oils, chemical liquids or
organic solvents
(7) Strong vibrations
(8) Other places where similar hazardous conditions
exist.
■ !Caution (Others)
Be sure to provide an appropriate fail-safe function
on your product to prevent secondary damages that may
be caused by the abnormal function or the failure of
our product.
■ Notice (Storage and Operating Conditions)
To keep solderability of product from declining, the
following storage condition is recommended.
1. Storage condition:
Temperature -10 to +40 degree C
Humidity less than 75%RH (not dewing condition)
2. Storage term:
Use this product within 6 months after delivery by
first-in and first-out stocking system.
3. Handling after unpacking:
After unpacking, reseal product promptly or store
it in a sealed container with a drying agent.
4. Storage place:
Do not store this product in corrosive gas
(sulfuric acid gas, chlorine gas, etc.) or in
direct sunlight.
■ Notice (Rating)
7
Use this product within the specified temperature
range.
Higher temperature may cause deterioration of the
characteristics or the material quality of this
product.
■ Notice (Soldering and Mounting)
1. Be sure that the preheat-up does not melt the
soldering of this product. Excessive heat may
cause failure to open, short or insulation break
down.
2. Do not touch the body with soldering iron.
The soldering point should be min. 5mm away from
the root of lead wire.
35
catalog
to prevent
smoking
and/or
burning,
Pleaseread
readrating
ratingand
and!CAUTION
!CAUTION(for
(forstorage,
storage,operating,
operating,rating,
rating,soldering,
soldering,mounting
mountingand
andhandling)
handling)ininthis
thisPDF
catalog
to prevent
smoking
and/or
burning,
etc. etc.
!Note •Please
R44E9.pdf 05.4.13
you are
requested
approvespecifications.
our product specifications
or to transact
approval
for product
before ordering.
•This
Thiscatalog
cataloghas
hasonly
onlytypical
typicalspecifications.
specificationsTherefore,
because there
is no
space fortodetailed
Therefore, please
approvethe
our
productsheet
specifications
or specifications
transact the approval
sheet for product specifications before ordering.
for Inrush Current Suppression Lead Type !Caution/Notice
■ Notice (Handling)
1. When this product is operated, temperature of some
area may be about 160 (degree C).
Use proper surrounding parts and material which
withstand such temperature. If they are inadequate
and kept at high temperature for long time, they
may be deteriorated or may produce harmful gas.
And, such harmful gas may deteriorate the element
of this product.
2. This product does not have waterproof construction.
Splashed water may cause failure mode such as
deterioration of characteristics or current leak.
So, do not apply cleaning to immerse it into water
or any solvent.
■ Notice (Others)
1. This products need sufficient cool off time to
recover high resistance. Repeated ON-OFF may cause
over specified current rating.
Make sure inrush current do not exceed the
specified ratings even at the worst condition.
(maximum ambient temperature and the shortest off
time.)
2. The resin coating of this product does not
guarantee insulating. Keep an adequate insulating
distance to surrounding parts.
7
36
3. The ceramic element of this product is fragile, and
care must be taken not to load an excessive
press-force or not to give a shock at handling.
Such forces may cause cracking or chipping to the
element.
4. Do not apply an excessive force to the lead wire.
Otherwise, it may cause break off junction between
lead wire and element, or may crack element.
So, fix lead wire of element side when lead wire
is bent or cut.
R44E9.pdf 05.4.13
catalog
to prevent
smoking
and/or
burning,
Pleaseread
readrating
ratingand
and!CAUTION
!CAUTION(for
(forstorage,
storage,operating,
operating,rating,
rating,soldering,
soldering,mounting
mountingand
andhandling)
handling)ininthis
thisPDF
catalog
to prevent
smoking
and/or
burning,
etc. etc.
!Note •Please
you are
requested
approvespecifications.
our product specifications
or to transact
approval
for product
before ordering.
•This
Thiscatalog
cataloghas
hasonly
onlytypical
typicalspecifications.
specificationsTherefore,
because there
is no
space fortodetailed
Therefore, please
approvethe
our
productsheet
specifications
or specifications
transact the approval
sheet for product specifications before ordering.
for Inrush Current Suppression Lead Type Package
■ Minimum Quantity
Part Numbers
Minimum Quantity (pcs.)
Ammo Pack
Bulk
NTPA7
1000
100
NTPA9
1000
100
NTPAA
750
100
NTPAD
400
100
NTPAJ
-
100
NTPAN
-
100
■ Taping Dimensions (NTPAD/NTPAA Series)
∆S
P
P2
∆h1
D
∆h2
e
H2
T
F
d
t1
t2
l
0
Item
øD
P0
W
W0
L
W1
H0
P1
W2
A
Code
Dimensions (mm)
Pitch of Component
P
30.0
Pitch of Sprocket Hole
P0
15.0±0.3
Lead Spacing
F
7.5±0.5
Length from Hole Center to Component
P2
7.5±1.5
Length from Hole Center to Lead
P1
3.75±1.0
Body Diameter
D
(refer to the table below)
Thickness
T
(refer to the table below)
Deviation along Tape, Left or Right
∆S
±2.0
Carrier Tape Width
W
18.0±0.5
Position of Sprocket Hole
W1
9.0±0.5
Lead Distance between Reference and Bottom Planes
H0
16.0±0.5
Height of Component
H2
10.0 max.
I
W0.5 to Y6.0
Overflow of Lead
Diameter of Sprocket Hole
D0
4.0±0.1
Lead Diameter (Sn-Plated Cu Wire)
d
0.8±0.05
Total Tape Thickness
t1
0.6±0.3
Total Thickness, Tape and Lead Wire
t2
2.0 max.
∆h1, ∆h2
2.0 max.
Deviation across Tape
L
Portion to cut in Case of Defect
11.0+0
–2.0
Hole Down Tape Width
W0
11.5 min.
Hole Down Tape Position
W2
4.0 max.
e
to line A
Coating Extension on Lead
D
T
NTPAD
Type
16.0 max.
5.5 max.
NTPAA
12.0 max.
5.0 max.
7
Continued on the following page.
37
R44E9.pdf 05.4.13
catalog
to prevent
smoking
and/or
burning,
Pleaseread
readrating
ratingand
and!CAUTION
!CAUTION(for
(forstorage,
storage,operating,
operating,rating,
rating,soldering,
soldering,mounting
mountingand
andhandling)
handling)ininthis
thisPDF
catalog
to prevent
smoking
and/or
burning,
etc. etc.
!Note •Please
you are
requested
approvespecifications.
our product specifications
or to transact
approval
for product
before ordering.
•This
Thiscatalog
cataloghas
hasonly
onlytypical
typicalspecifications.
specificationsTherefore,
because there
is no
space fortodetailed
Therefore, please
approvethe
our
productsheet
specifications
or specifications
transact the approval
sheet for product specifications before ordering.
for Inrush Current Suppression Lead Type Package
Continued from the preceding page.
■ Taping Dimensions (NTPA7/NTPA9 Series)
P
P2
∆S
∆h1
∆h2
D
e
H2
T
d
W2
Item
t2
t1
Dimensions (mm)
P
12.7
Pitch of Sprocket Hole
P0
12.7±0.3
Lead Spacing
F
5.0+0.8
–0.3
Length from Hole Center to Component
P2
6.35±1.3
Length from Hole Center to Lead
P1
3.85±0.8
Body Diameter
D
(refer to the table below)
Thickness
T
5.0 max.
∆S
±1.5
Carrier Tape Width
W
18.0±0.5
Position of Sprocket Hole
W1
9.0+0.5
–0.75
Lead Distance between Reference and Bottom Planes
H0
16.0±1.0
Height of Component
H2
6.0 max.
I
W0.5 to Y4.0
Overflow of Lead
Diameter of Sprocket Hole
D0
4.0±0.3
Lead Diameter (Sn-Plated Cu Wire)
d
0.6±0.05
Total Tape Thickness
t1
0.6±0.3
Total Thickness, Tape and Lead Wire
t2
2.0 max.
∆h1, ∆h2
Deviation across Tape
Portion to cut in Case of Defect
L
1.5 max.
11.0+0
–2.0
Hole Down Tape Width
W0
11.0 min.
Hole Down Tape Position
W2
4.0 max.
e
to line A
Coating Extension on Lead
Type
38
Code
Pitch of Component
Deviation along Tape, Left or Right
7
0
P0
W
W0
L
W1
H0
F
øD
P1
l
A
D
NTPA9
11.0 max
NTPA7
9.0 max.
!Note Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.
This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specificaions before ordering.
R44E9.pdf 05.4.13
Note:
1. Export Control
For customers outside Japan
No muRata products should be used or sold, through any channels, for use in the design, development, production, utilization, maintenance or operation of, or
otherwise contribution to (1) any weapons (Weapons of Mass Destruction (nuclear, chemical or biological weapons or missiles) or conventional weapons) or (2)
goods or systems specially designed or intended for military end-use or utilization by military end-users.
For customers in Japan
For products which are controlled items subject to the “Foreign Exchange and Foreign Trade Law” of Japan, the export license specified by the law is required
for export.
<
<
>
>
2. Please contact our sales representatives or product engineers before using the products in this catalog for the applications listed below, which require especially
high reliability for the prevention of defects which might directly damage a third party's life, body or property, or when one of our products is intended for use in
applications other than those specified in this catalog.
q Aircraft equipment
w Aerospace equipment
e Undersea equipment
r Power plant equipment
t Medical equipment
y Transportation equipment (vehicles, trains, ships, etc.)
u Traffic signal equipment
i Disaster prevention / crime prevention equipment
o Data-processing equipment
!0 Application of similar complexity and/or reliability requirements to the applications listed above
3. Product specifications in this catalog are as of January 2005. They are subject to change or our products in it may be discontinued without advance notice.
Please check with our sales representatives or product engineers before ordering. If there are any questions, please contact our sales representatives or
product engineers.
4. Please read rating and
CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
5. This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or
transact the approval sheet for product specifications before ordering.
6. Please note that unless otherwise specified, we shall assume no responsibility whatsoever for any conflict or dispute that may occur in connection with the effect
of our and/or a third party's intellectual property rights and other related rights in consideration of your use of our products and/or information described or
contained in our catalogs. In this connection, no representation shall be made to the effect that any third parties are authorized to use the rights mentioned
above under licenses without our consent.
7. No ozone depleting substances (ODS) under the Montreal Protocol are used in our manufacturing process.
http://www.murata.com/
Head Office
1-10-1, Higashi Kotari, Nagaokakyo-shi, Kyoto 617-8555, Japan
Phone: 81-75-951-9111
International Division
3-29-12, Shibuya, Shibuya-ku, Tokyo 150-0002, Japan
Phone: 81-3-5469-6123 Fax: 81-3-5469-6155 E-mail: [email protected]
Similar pages