GeneSiC GB2X50MPS12-227 Silicon carbide power schottky diode Datasheet

GB2X50MPS12-227
1200 V SiC MPS™ Diode
Silicon Carbide Power
Schottky Diode
VRRM
IF (Tc = 1332°C)
QC
Features







Package
High Avalanche (UIS) Capability
Enhanced Surge Current Capability
175 °C Maximum Operating Temperature
Temperature Independent Switching Behavior
Positive Temperature Coefficient Of VF
Extremely Fast Switching Speeds
Superior Figure of Merit QC/IF
3
1
2
2
3
1
4
=
=
=
1200 V
100 A*
554 nC*
4
SOT-227
Advantages
Applications
















Low Standby Power Losses
Improved Circuit Efficiency (Lower Overall Cost)
Low Switching Losses
Ease of Paralleling Devices without
ithout Thermal Runaway
Smaller Heat Sink Requirements
Low Reverse Recovery Current
Low Device Capacitance
Low Reverse Leakage Current att Operating Temperature
Power Factor Correction (PFC)
Switched-Mode
Mode Power Supply (SMPS)
Solar Inverters
Wind Turbine Inverters
Motor Drives
Induction Heating
Uninterruptible Power Supply (UPS)
High Voltage Multipliers
Absolute Maximum Ratings
Parameter
Repetitive Peak Reverse Voltage (Per Leg)
Continuous Forward Current (Per Leg/Per
Device)
Non-Repetitive Peak Forward Surge Current,
Half Sine Wave (Per Leg)
Repetitive Peak Forward Surge Current, Half
Sine Wave (Per Leg)
Non-Repetitive Peak Forward Surge Current
(Per Leg)
I2t Value (Per Leg)
Non-Repetitive Avalanche Energy (Per Leg)
Diode Ruggedness (Per Leg)
Power Dissipation (Per Leg/Per Device)
Operating and Storage Temperature
Symbol
VRRM
IF
IF,SM
IF,RM
IF,max
2
Conditions
Unit
V
TC = 25 °C, D = 1
TC = 132 °C, D = 1
TC = 25 °C, tP = 10 ms
TC = 150 °C, tP = 10 ms
TC = 25 °C, tP = 10 ms
TC = 150 °C, tP = 10 ms
Values
1200
102/204
204
50/100
100
320
280
220
150
TC = 25 °C, tP = 10 µs
1400
A
TC = 25 °C, tP = 10 ms
300
450
100
380/760
760
-55
55 to 175
A2s
mJ
V/µs
W
°C
∫i dt
EAS
dV/dt
Ptot
Tj , Tstg
L = 1 mH, IAV = 42 A, VDD = 60 V
VR = 0 ~ 960 V
TC = 25 °C
Symbol
Conditions
A
A
A
Electrical Characteristics (Per Leg)
Parameter
Diode Forward Voltage
VF
Reverse Current
IR
Total Capacitive Charge
QC
Switching Time
ts
Total Capacitance
C
IF = 50 A, Tj = 25 °C
IF = 50 A, Tj = 175 °C
VR = 1200 V, Tj = 25 °C
VR = 1200 V, Tj = 175 °C
VR = 400 V
IF ≤ IF,MAX
VR = 800 V
dIF/dt = 200 A/μs
VR = 400 V
Tj = 175 °C
VR = 800 V
VR = 1 V, f = 1 MHz, Tj = 25 °C
VR = 800 V, f = 1 MHz, Tj = 25 °C
min.
Values
typ.
1.5
2.3
5
40
186
277
max.
1.8
2.7
70
475
Unit
V
µA
nC
< 10
ns
3037
203
pF
0.39
°C/W
Thermal / Mechanical Characteristics
Thermal Resistance, Junction – Case (Per Leg)
* Per Device, ** Per Leg
Feb 2018 Rev1.1
RthJC
http://www.genesicsemi.com/sic_rectifiers_diodes/merged_pin_schottky/
Page 1 of 6
GB2X50MPS12-227
1200 V SiC MPS™ Diode
IF = f(VF,Tj); tP = 300 µss
IF = f(VF,Tj); tP = 300 µs
Figure 1: Typical Forward Characteristics (Per
Leg)
Figure 2: Typical High Current Forward
Characteristics (Per Leg)
IR = f(VR,Tj)
Ptot = f(Tj)
Figure 3: Typical Reverse Characteristics (Per
Leg)
Figure 4: Power Derating Curve (Per Leg)
Feb 2018 Rev1.1
http://www.genesicsemi.com/sic_rectifiers_diodes/merged_pin_schottky/
Page 2 of 6
GB2X50MPS12-227
1200 V SiC MPS™ Diode
IF = f(TC); D = tP/T, tP= 10 µs
C = f(VR); Tj = 25 °C;; f = 1MHz
Figure 5: Current Derating Curves (Per Leg)
Figure 6: Typical Junction Capacitance vs
Reverse Voltage Characteristics (Per Leg)
Qc = f(VR); Tj = 25 °C;; f = 1MHz
EC = f(VR); Tj = 25 °C;; f = 1MHz
Figure 7: Typical Capacitive Charge vs.
Reverse Voltage Characteristics (Per Leg)
Figure 8: Typical Capacitive Energy vs.
Reverse Voltage Characteristics (Per Leg)
Feb 2018 Rev1.1
http://www.genesicsemi.com/sic_rectifiers_diodes/merged_pin_schottky/
Page 3 of 6
GB2X50MPS12-227
1200 V SiC MPS™ Diode
Zth,jc = f(tP,D); D = tP/T
Figure 9:: Transient Thermal Impedance (Per Leg)
IF = (VF – VBI)/RDIFF
Built-In Voltage (VBI):
VBI(Tj) = m*Tj + b,
m = -1.29e-03,
03, b = 0.913
Differential Resistance (RDIFF):
RDIFF(Tj) = a*Tj2 + b*Tj + c (Ω);
a = 6.10e-05,
05, b = 9.01e-03,
9.01e
c = 2.01
IF = f(VF, Tj)
Figure 10:: Forward Curve Model (Per Leg)
Feb 2018 Rev1.1
http://www.genesicsemi.com/sic_rectifiers_diodes/merged_pin_schottky/
Page 4 of 6
GB2X50MPS12-227
1200 V SiC MPS™ Diode
Package Dimensions:
SOT-227
PACKAGE OUTLINE
NOTE
1. CONTROLLED DIMENSION IS INCH. DIMENSION IN BRACKET IS MILLIMETER.
2. DIMENSIONS DO NOT INCLUDE END FLASH, MOLD FLASH, MATERIAL PROTRUSIONS
Feb 2018 Rev1.1
http://www.genesicsemi.com/sic_rectifiers_diodes/merged_pin_schottky/
Page 5 of 6
GB2X50MPS12-227
1200 V SiC MPS™ Diode
RoHS Compliance
The levels of RoHS restricted materials in this product are below the maximum concentration values (also referred to as the
threshold limits) permitted for such substances, or are used in an exempted application, in accordance with EU Directive
2011/65/EC (RoHS2), as implemented
ented January 2, 2013. RoHS Declarations for this product can be obtained from your
GeneSiC representative.
REACH Compliance
REACH substances of high concern (SVHCs) information is available for this product. Since the European Chemical
Chemi Agency
(ECHA) has published notice of their intent to frequently revise the SVHC listing for the foreseeable future, please contact a
GeneSiC representative to insure you get the most up
up-to-date REACH SVHC Declaration. REACH
REAC banned substance
information (REACH Article 67)
7) is also available upon request.
This product has not been designed or tested for use in, and is not intended for use in, applications implanted into the
human body nor in applications in which failure of the product could lead to death, personal injury or property damage,
including but not limited to equipment used in the operation of nuclear facilities, life
life-support
support machines, cardiac
defibrillators or similar emergency medical equipment, aircraft navigation or communication or control systems, or air
traffic control systems.
GeneSiC disclaims all and any warranty and liability arising out of use or application of any product. No license, express or
implied to any intellectual property rights is granted by this document.
Related Links



Soldering Document: http://www.genesicsemi.com/quality/quality
http://www.genesicsemi.com/quality/quality-manual/
Tin-whisker Report: http://www.genesicsemi.com/quality/compliance/
Reliability Report: http://www.genesicsemi.com/quality/reliability/
Copyright © 2018 GeneSiC Semiconductor Inc. All Rights Reserved
The information in this document is subject to change without notice
Feb 2018
Rev1.1
http://www.genesicsemi.com/sic_rectifiers_diodes/merged_pin_schottky/
Published by
GeneSiC Semiconductor, Inc.
43670 Trade Center Place Suite 155
Dulles, VA 20166
Page 6 of 6
GB2X50MPS12-227
1200 V SiC MPS™ Diode
SPICE Model Parameters
This is a secure document. Please copy this code from the SPICE model PDF file on our website
(http://www.genesicsemi.com/sic_rectifiers_diodes/merged_pin_schottky/GB2X50MPS12
http://www.genesicsemi.com/sic_rectifiers_diodes/merged_pin_schottky/GB2X50MPS12-227_SPICE.pdf)
http://www.genesicsemi.com/sic_rectifiers_diodes/merged_pin_schottky/GB2X50MPS12
into LTSPICE (version 4) software
tware for simulation of tthe GB2X50MPS12-227. All the simulations are per
leg.
*
GeneSiC Semiconductor SiC MPS TM Rectifier
*
Revision: 1.1
*
Date: February-2018
**************************************************************************
**
SOT-227 package
**************************************************************************
.SUBCKT GB2X50MPS12 A K Case
L_anode
A
AD
10
10n
D1
AD
Case
G
GC50MPS12
L_cathode K
Case
10
10n
.ends
**************************************************************************
.SUBCKT GB2X50MPS12
12 ANODE KATHODE
D1 ANODE KATHODE GC50MPS12_SCHOTTKY
12_SCHOTTKY
.MODEL GC50MPS12_SCHOTTKY
12_SCHOTTKY D
+ IS
4.27E-14
RS
0.0124
+ N
1
IKF
500
+ EG
1.2
XTI
2
+ TRS1
0.005434
TRS2
2.717E-05
+ CJO
4.24E-10
VJ
0.879
+ M
0.438
FC
0.5
+ TT
1.00E-10
BV
1600
+ IBV
5E-06
VPK
1200
+ IAVE
50
TYPE
SiC_MPSTM
+ MFG
GeneSiC_Semi
.ENDS
* End of GB2X50MPS12-227 SPICE Model
**************************************************************************
* This model is provided "AS IS, WHERE IS, AND WITH NO WARRANTY OF ANY KIND
* EITHER EXPRESSED OR IMPLIED, INCLUDING BUT NOT LIMITED TO ANY IMPLIED
* WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE."
Feb 2018 Rev1.1
http://www.genesicsemi.com/sic_rectifiers_diodes/merged_pin_schottky/
Page 1 of 1
Similar pages