FB3225 Series, FB4516 Series, FB4532 Series SMD MULTILAYER FERRITE CHIP BEADS (HIGH IMPEDANCE) Rev. A A. Electrical Specifications: P/N FB322513U310 FB322513U330 FB322513U520 FB322513U600 Impedance (Ω) ±25% @100MHz 31 33 52 60 DCR Max.(Ω) 0.20 0.20 0.20 0.20 I rms. Max.(mA) 400 400 400 800 FB451616U600 FB451616U800 FB451616U121 FB451616U181 FB451616Z800 FB451616Z121 FB451616Z151 FB451616Z171 60 80 120 180 80 120 150 170 0.10 0.10 0.20 0.25 0.10 0.10 0.20 0.25 800 600 500 500 600 600 500 500 FB453215U700 FB453215U800 FB453215U121 FB453215U131 70 80 120 130 0.10 0.10 0.15 0.15 600 600 500 500 B. Dimensions: mm (In) Series FB322513 Tol. FB451616 Tol. FB453215 Tol. a 3.2 (0.126) ± 0.2 (0.008 ) 4.5 (0.177) ± 0.2 (0.008 ) 4.5 (0.177) ± 0.2 (0.008 ) b 2.5 (0.098) ± 0.2 (0.008 ) 1.6 (0.063) ± 0.2 (0.008 ) 3.2 (0.126) ± 0.2 (0.008 ) c 1.3 (0.051) ± 0.2 (0.008 ) 1.6 (0.063) ± 0.2 (0.008 ) 1.5 (0.059) ± 0.2 (0.008 ) d 0.5 (0.020) ± 0.3 (0.012 ) 0.5 (0.020) ± 0.3 (0.012 ) 0.5 (0.020) ± 0.3 (0.012 ) e 4.40 (0.173) f 2.70 (0.106) g 1.20 (0.047) Typ. Typ. Typ. 5.80 (0.228) 1.80 (0.071) 2.00 (0.079) Typ. Typ. Typ. 5.80 (0.228) 3.40 (0.134) 2.00 (0.079) Typ. Typ. Typ. C. Part Number Key: FB AA BB CC Y XXX IMPEDANCE VALUE MATERIAL CODE: L, U, Z, B or G DIMENSIONS: LENGTH (a) x WIDTH (b) x THICKNESS (c) FAMILY: FB Frontier Electronics Corp.® http://www.frontierusa.com Page 1 of 2 667 E. Cochran St., Simi Valley, CA 93065 Phone: 1-805-522-9998, Fax: 1-805-522-9989 FB3225 Series, FB4516 Series, FB4532 Series SMD MULTILAYER FERRITE CHIP BEADS (HIGH IMPEDANCE) Rev. A D. Materials: ITEM Initial Permeability (µiac): Maximum Permeability (µm): Saturation Flux Density at 10 Oe: Curie Temperature(Tc): Volume Resistivity (ρ): Temperature Coefficient: Density: ------- L 25 125 B 45 125 Material Code G 110 250 U 200 450 Z 500 900 Gauss °C 2000 >200 2000 >200 1700 >130 1400 >100 1500 >130 Ω-m 1/10000°C 100000 10 100000 10 100000 13 100000 5 100000 12 g/cm³ 4.8 4.8 4.8 4.8 4.8 UNIT E. Impedance Characteristics of Materials: a. b. c. d. e. f. Z Material is for applications whose blocking regions are near 100 MHz. L Material, an improvement of B Material has sharp impedance characteristic at high frequency. G Material is for application whose signal frequency is far from the cut off region. Suitable for application requires low insertion loss at high frequency. Different materials are available for different application range. With one material, higher impedance has sharper characteristics. Please confirm the signal wave form to choose suitable products. F. General Information: 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13. 14. FBAABBCC-yxxx, “FB” = Type, “AA” = Length, “BB” = Width, “CC” = Thickness, “y” = Material, “xxx” = Impedance. Tolerance: ±25% Small and lightweight surface mounting type. Dimensions are suitable for automatic mounting High-density packaging with a pitch of 2.54 mm (0.1 inch) max. is possible. This series requires less space and have greater EMI suppression effects. Different types with the same shape are available. Excellent in physical properties, such as terminal strength, flexure strength, soldering resistance and solder-ability. Applicable to both flow and IR reflow soldering. High impedance covers wide frequency ranges. TI series can be used in high current circuits due to its low DC resistance. Operating temperature: -40°C to +125ºC Unspecified values available on request. MSL: Level 1. Impedance and Current range: a. FB322513 (1206) Series: From 31 Ω (400 mA) to 60 Ω (800 mA) b. FB451616 (1806) Series: From 60 Ω (800 mA) to 180 Ω (500 mA) c. FB453215 (1812) Series: From 70 Ω (600 mA) to 130 Ω (500 mA) G. Applications: 1. 2. 3. 4. 5. Game Consoles Set Top Boxes Cables Modems Computers Mobile Communication Devices (Cell Phones, Radios, etc.) Frontier Electronics Corp.® http://www.frontierusa.com Page 2 of 2 667 E. Cochran St., Simi Valley, CA 93065 Phone: 1-805-522-9998, Fax: 1-805-522-9989