DFE18SANR24ME0# “#” indicates a package specification code. < List of part numbers with package codes > DFE18SANR24ME0L , DFE18SANR24ME0D Shape Notes When rated current is applied to the products, inductance will be within ±30% of initial inductance value range. When rated current is applied to the products, temperature rise caused by self-generated heat shall be limited to 40℃ max. Keep the temperature (ambient temperature plus self-generation of heat) under 125℃. References Packaging code L size 1.6 ±0.2mm W size 0.8 ±0.2mm T size 0.8 mm Size code in inch (mm) 0603 (1608) Specifications Minimum quantity D φ180mm Paper taping 3000 L φ180mm Embossed taping 3000 Mass (Typ.) 1 piece 0.007g Specifications Inductance 0.24µH ±20% Inductance test frequency 1MHz Rated current (Isat) (Based on Inductance change) 4200mA Rated current (Itemp) (Based on Temperature rise) 3200mA Max. of DC resistance 0.036Ω Operating temperature range (Self-temperature rise is included) -40〜125℃ Operating temperature range (Self-temperature rise is not included) -40〜85℃ Class of magnetic shield Metal Alloy Absolute maximum voltage 20V DC Series DFE18SAN_E0 1 of 2 1.This datasheet is downloaded from the website of Murata Manufacturing Co., Ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our sales representatives or product engineers before ordering. 2.This datasheet has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering. URL : https://www.murata.com/ Last updated: 2018/05/21 Chart of characteristic data (The charts below may show another part number which shares its characteristics.) 2 of 2 1.This datasheet is downloaded from the website of Murata Manufacturing Co., Ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our sales representatives or product engineers before ordering. 2.This datasheet has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering. Last updated: 2018/05/21