LSL22 thru LSL24 Surface Mount Schottky Rectifier Reverse Voltage 20~40V Forward Current 2A Features • • • • • • Schottky barrier diodes Low forward voltage drop Low leakage current Moisture sensitivity: level 1, per J-STD-020 Solder dip 260 °C, 10 s Low profile， typical thickness 1.0mm eSGB (SMAF) Typical Applications For use of fast swiching in RF module, lighting, cellular phone, portable device, power supplies, and other consumer applications. Maximum Ratings (TA = 25 °C unless otherwise noted) Parameter Symbol LSL22 LSL23 LSL24 Unit Maximum repetitive peak reverse voltage VRRM 20 30 40 V Maximum RMS voltage VRMS 14 21 28 V VDC 30 30 40 V Maximum DC blocking voltage Maximum average forward rectified current IF(AV) 2 A Peak forward surge current 8.3 ms single half sine-wave superimposed on rated load IFSM 50 A TJ, TSTG - 55 to + 150 °C Operating junction and storage temperature range Electrical Characteristics (TA = 25 °C unless otherwise noted) Parameter Maximum instantaneous forward voltage Maximum DC reverse current at rated DC blocking voltage Test Conditions IF=2A, Tj=25℃ Symbol LSL22 LSL23 LSL24 0.43 VF Unit Volts 0.5 Typical junction capacitance TA=25℃ TA=125℃ 4.0 V, 1 MHz CJ 160 pF Typical thermal resistance juntion to lead RθJL 30 ℃/W IR mA 30 Note1:Thermal resistance from junction to lead,mounted on PCB with 0.315×0.315〃（8.0×8.0mm）copper pads www.goodark.com 1/4 2014.12-Rev.A LSL22 thru LSL24 Surface Mount Schottky Rectifier Reverse Voltage 20~40V Forward Current 2A Ratings and Characteristics Curves (TA = 25℃ unless otherwise noted) Figure 1.Forward Current Derating Curve Figure 2.Maximum Non-Repetitive Peak Forward Surge Current Figure 3. Typical Instantaneous Forward Characteristics www.goodark.com Figure 4. Typical Reverse Characteristics 2/4 2014.12-Rev.A LSL22 thru LSL24 Surface Mount Schottky Rectifier Reverse Voltage 20~40V Forward Current 2A Package Outline Dimensions DIM Unit: mm Unit: inch MIN MAX MIN MAX A 0.92 1.08 0.036 0.043 A1 0 0.1 0.000 0.004 B 1.25 1.45 0.049 0.057 C 0.1 0.25 0.004 0.010 D 2.6 2.8 0.102 0.110 E 4.1 4.3 0.161 0.169 L 0.7 1.1 0.028 0.043 HE 4.8 5.2 0.189 0.205 Soldering footprint Packing Information Packing quantities: 10,000 pcs/Reel，12mm Tape, 13" Reel Tape & Reel Specification www.goodark.com 3/4 2014.12-Rev.A LSL22 thru LSL24 Surface Mount Schottky Rectifier Reverse Voltage 20~40V Forward Current 2A Disclaimers These materials are intended as a reference to assist our customers in the selection of the Suzhou Good-Ark product best suited to the customer’s application; they do not convey any license under any intellectual property rights, or any other rights, belonging to Suzhou Good-Ark Electronics Co., Ltd.or a third party. Suzhou Good-Ark Electronics Co., Ltd. assumes no responsibility for any damage, or infringement of any third-party’s rights, originating in the use of any product data, diagrams, charts, programs, algorithms, or circuit application examples contained in these materials. All information contained in these materials, including product data, diagrams, charts, programs and algorithms represents information on products at the time of publication of these materials, and are subject to change by Suzhou Good-Ark Electronics Co., Ltd. without notice due to product improvements or other reasons. It is therefore recommended that customers contact Suzhou Good-Ark Electronics Co., Ltd. or an authorized Suzhou Good-Ark Electronics Co., Ltd. for the latest product information before purchasing a product listed herein. The information described here may contain technical inaccuracies or typographical errors. Suzhou Good-Ark Electronics Co., Ltd. assumes no responsibility for any damage, liability, or other loss rising from these inaccuracies or errors. Please also pay attention to information published by Suzhou Good-Ark Electronics Co., Ltd. by various means, including our website home page. (http://www.goodark.com) When using any or all of the information contained in these materials, including product data, diagrams, charts, programs, and algorithms, Please be sure to evaluate all information as a total system before making a final decision on the applicability of the information and products. Suzhou Good-Ark Electronics Co., Ltd. assumes no responsibility for any damage, liability or other loss resulting from the information contained herein. The prior written approval of Suzhou Good-Ark Electronics Co., Ltd. is necessary to reprint or reproduce in whole or in part these materials. Please contact Suzhou Good-Ark Electronics Co., Ltd. or an authorized distributor for further details on these materials or the products contained herein. www.goodark.com 4/4 2014.12-Rev.A