NKK M2029TJG01-GE General specification Datasheet

Miniature Rockers
General Specifications
Electrical Capacity (Resistive Load)
Power Level (silver):
6A @ 125V AC & 3A @ 250V AC
4A @ 30V DC for On-None-On; 3A @ 30V DC for all other circuits
Logic Level (gold): 0.4VA maximum @ 28V AC/DC maximum
(Applicable Range 0.1mA ~ 0.1A @ 20mV ~ 28V)
Logic/Power Level (gold over silver): Combines silver & gold ratings
Note: Find additional explanation of dual rating & operating range in Supplement section.
Other Ratings
Contact Resistance:
Insulation Resistance:
Dielectric Strength:
Mechanical Life:
Electrical Life:
Angle of Throw:
10 milliohms maximum for silver; 20 milliohms maximum for gold
1,000 megohms minimum @ 500V DC
1,000V AC minimum between contacts for 1 minute minimum;
1,500V AC minimum between contacts and case for 1 minute minimum
50,000 operations minimum
25,000 operations minimum for silver; 50,000 operations minimum for gold;
50,000 operations minimum for silver at 3A @ 125V AC
25°
Materials & Finishes
Rotaries
B
Actuator Clip & Mounting Frame:
Body Frame:
Case:
Movable Contactor:
Movable Contacts:
Stationary Contacts:
Slides
Keylocks
Programmable Illuminated PB
Pushbuttons
Rockers
Toggles
Series M
Terminals:
Stainless Steel
Stainless steel
Diallyl phthalate resin (UL94V–0)
Phosphor bronze with silver or gold plating
Silver alloy (code W); copper with gold plating (code G); or silver alloy with gold plating (code A)
Silver with silver plating (code W); copper or brass with gold plating (code G);
or silver with gold plating (code A)
Copper or brass with silver plating; or copper or brass with gold plating
Environmental Data
Tactiles
Operating Temp Range:
Humidity:
Vibration:
Processing
Soldering:
Touch
Tilt
Shock:
Wave Soldering (PC version) for Gold: See Profile A in Supplement section.
Manual Soldering for Gold: See Profile A in Supplement section.
Wave Soldering (PC version) for Silver: See Profile B in Supplement section.
Manual Soldering for Silver: See Profile B in Supplement section.
Note: Actuator must be in OFF (center) position while soldering.
These devices are not process sealed. Hand clean locally using alcohol based solution.
Standards & Certifications
Flammability Standards:
UL:
UL94V–0 for case
File No. E44145 - Recognized only when ordered with marking on switch.
Add “/U” or “/CUL ” before first dash in part number to order UL recognized switch.
All models recognized at 6A @ 125V AC, 3A @ 250V AC or 0.4VA maximum @ 28V DC maximum.
CSA: File No. 023535_0_000 - Certified only when ordered with marking on switch.
Add “/C” before first dash in part number to order CSA certified switch.
All models certified at 6A @ 125V AC or 3A @ 250V AC or 0.4VA maximum @ 28V maximum.
Supplement
Accessories
Indicators
Cleaning:
–30°C through +85°C (–22°F through +185°F)
90 ~ 95% humidity for 96 hours @ 40°C (104°F)
10 ~ 55Hz with peak-to-peak amplitude of 1.5mm traversing the frequency range & returning
in 1 minute; 3 right angled directions for 2 hours
50G (490m/s2) acceleration (tested in 6 right angled directions, with 5 shocks in each direction)
B62
www.nkkswitches.com
Distinctive Characteristics
B
Pushbuttons
Three methods of panel mounting: flat frame for flush with face or subpanel,
snap-in, and PCB.
Rockers
Toggles
Series M
Miniature Rockers
Programmable Illuminated PB
High insulating barriers increase isolation of circuits in multipole devices
and provide added protection to contact points.
The molded diallyl phthalate case has a UL 94V-0
flammability rating.
Epoxy sealed terminals prevent entry of solder flux
and other contaminants.
Keylocks
Prominent external insulating barriers increase
insulation resistance and dielectric strength.
Slides
Rotaries
Bias guard prevents misalignment of contacts;
interlocking of actuator block with rocker and
internal guide does not allow transmission of
diagonal force on rocker to reach contact
mechanism.
Page B64
Bracket PC Mount
Page B72
Flat Frame Mount
Page B83
Indicators
Snap-in Mount
www.nkkswitches.com
B63
Supplement
Accessories
Actual Size
Touch
Tilt
Tactiles
Clinching of the frame to the case well above the base
and terminals provides 1,500V dielectric strength.
Series M
TYPICAL SWITCH
B
M20
1
TJ
2
W
F
01
Poles
Rockers & Paddles
1
SPDT
2
DPDT
SP3T
2
ON
F
.450” (11.43mm) Wide Rocker
Terminals
G
.450” (11.43mm) Wide Paddle
01
Solder Lug
S
02
Quick Connect
.453” (11.5mm) False
Illluminated Rocker in Black only
03
.250” (6.35mm)
Straight PC
05
.425” (10.8mm)
Wirewrap
Rocker & Paddle
Colors
06
.750” (19.05mm)
Wirewrap
A
Black
.964” (24.5mm)
Wirewrap
B
White
07
C
Red
08
1.062” (27.0mm)
Wirewrap
E
Yellow
Mounting Frame
TJ
Snap-in Frame
Circuits
NONE
ON
3
ON
OFF
ON
5
ON
NONE
(ON)
8
(ON)
OFF
(ON)
9
ON
OFF
(ON)
*4
ON
ON
ON
F
Green
*6
(ON)
ON
(ON)
G
Blue
*7
ON
ON
(ON)
H
Gray
( ) = Momentary
Slides
Rotaries
Keylocks
Programmable Illuminated PB
Pushbuttons
Rockers
Toggles
Snap-In Mount Miniature Rockers
Contact Materials & Ratings
W
Silver; Rated
6A @ 125V AC & 3A @ 250V AC
G
Gold; Rated
0.4VA max @ 28V AC/DC max
A
Gold over Silver; Rated
6A @ 125V AC & 0.4VA max @
28V AC/DC max
Touch
Tilt
Tactiles
* 3-ON circuits
DESCRIPTION FOR TYPICAL ORDERING EXAMPLE
Indicators
M2012TJW01-FC-1A
Accessories
Red .450” (11.43mm)
Wide Rocker
Black Bezel without LED
SPDT
ON-NONE-ON Circuit
Snap-in Frame
Silver Contacts with
6–Amp Rating
Supplement
Solder Lug Terminals
B64
www.nkkswitches.com
C
Series M
ORDERING EXAMPLE
A
Bezel with 2 Round LEDs
4
Bezel with 2 Rectangular
LEDs
White
E
Yellow
F
Green
G
Blue
H
Gray
A
Black
A
Programmable Illuminated PB
B
1 LED
C
Red
F
Green
2 LEDs
Black
Top LED
Bottom LED
C
Red
C
Red
E
Yellow
E
Yellow
F
Green
F
Green
Tactiles
3
Black
Keylocks
Bezel with 1 Round LED
A
IMPORTANT:
Touch
Tilt
Switches are supplied without UL, cULus & CSA marking unless specified.
UL, cULus & CSA recognized only when ordered with marking on the switch.
Specific models, ratings, & ordering instructions are noted on the General
Specifications page.
DESCRIPTION FOR TYPICAL ORDERING EXAMPLE
Red .450” (11.43mm)
Wide Rocker
Indicators
M2012TJW01-FC-3A-CF
Top LED Red
Bottom LED Green
Snap-in Frame
Accessories
2
Bezel without LED
LED Colors
Black Bezel with
2 Round LEDs
SPDT ON-NONE-ON Circuit
Silver Contacts with
6–Amp Rating
Solder Lug Terminals
Supplement
1
Bezel Colors
Rotaries
Optional Bezels
Pushbuttons
B
Slides
1
Rockers
Toggles
Snap-In Mount Miniature Rockers
www.nkkswitches.com
B65
Series M
Toggles
Snap-In Mount Miniature Rockers
POLES & CIRCUITS
Rocker Position
) = Momentary
Programmable Illuminated PB
Pushbuttons
Rockers
(
B
Connected Terminals
Down
Center
Up
Down
Pole
Model
SP
M2012
M2013
M2015
M2018
M2019
ON
ON
ON
(ON)
ON
NONE
OFF
NONE
OFF
OFF
ON
ON
(ON)
(ON)
(ON)
M2022
M2023
M2025
M2028
M2029
ON
ON
ON
(ON)
ON
NONE
OFF
NONE
OFF
OFF
ON
ON
(ON)
(ON)
(ON)
DP
Throw & Schematics
Center
Up
Note: Terminal numbers are not
actually on the switch.
SPDT
2-3
OPEN
2 (COM)
2-1
3
1
DPDT
2-3 5-6
OPEN
2
2-1 5-4
3
(COM)
1
5
6
4
For 3 Throw (3-On)
Pole
Model
Down
Center
Up
SP
M2024
M2026
M2027
ON
(ON)
ON
ON
ON
ON
ON
(ON)
(ON)
Rotaries
Keylocks
Connected Terminals & Schematic
External
Connection
2 (in)
5
Slides
1 (out)
3 4 (out) 6 (out)
2-3 5-6
External
Connection
2 (in)
5
1 (out)
External Connection
The SP3T model utilizes a double pole
base.
External
Connection
2 (in)
5
3 4 (out) 6 (out)
1 (out)
2-3 5-4
3 4 (out) 6 (out)
External
connection
must be made
during field
installation.
(out)
External
Conn
6
3
5
2
4
1
(out)
Common
(in)
(out)
2-1 5-4
Tactiles
TJ
Tilt
MOUNTING FRAME
(18.0)
.710
Panel Cutout for
Single Pole
without Bezel
Snap-in Frame
Touch
Panel Cutout for
Double Pole
without Bezel
(12.5)
.492
25°
(2.54) Dia
.100
(12.2)
.480
(15.9)
.626
(4.3)
.170
(15.9)
.626
(13.1)
.516
Panel Thickness without Bezel: .039” ~ .126” (1.0mm ~ 3.2mm)
Panel Thickness with Bezel: .039” ~ .098” (1.0mm ~ 2.5mm)
Accessories
Indicators
CONTACT MATERIALS & RATINGS
W
Silver over Silver
Power Level
6A @ 125V AC & 3A @ 250V AC
G
Gold over Brass or Copper
Logic Level
0.4VA maximum @ 28V AC/DC maximum
Note: See Supplement section to find complete explanation of operating range.
Supplement
A
Gold over Silver
Power Level
or Logic Level
6A @ 125V AC
or 0.4VA maximum @ 28V AC/DC maximum
Note: This dual rated option is suitable when two or more identical switches are used in logic and in power circuits within the
same application. See Supplement section to find complete explanation of dual rating and operating range.
B66
www.nkkswitches.com
Series M
TERMINALS
.062” (1.57mm) Wide
Quick Connect
02
(4.0)
.157
(2.0)
.079
(2.0)
(1.1) .079
.043
Thk = (0.8)
.031
(1.57)
.062
Thk = (0.8)
.031
(4.8)
.189
.250” (6.35mm)
Straight PC
3
(6.35)
(4.8) .250
.189
Epoxy Seal
2
(4.7) Typ
.185
1
.425” (10.8mm)
Wirewrap or Extended PC
06
.750” (19.05mm)
Wirewrap or Extended PC
07
.964” (24.5mm)
Wirewrap or Extended PC
08
1.062” (27.0mm)
Wirewrap or Extended PC
6
2
5
1
4
(1.8) Dia Typ
.073
(1.17)
.046
Thk = (0.8)
.031
05
3
(4.7) Typ
.185
Programmable Illuminated PB
03
B
(6.35)
.250
Epoxy Seal
Pushbuttons
Epoxy Seal
(1.8) Dia Typ
.073
Single Pole
Double Pole
If using as extended PC terminal, refer to
the above footprints.
Epoxy Seal
A
Dimension A =
Keylocks
Solder Lug
terminal lengths as shown
beside the terminal codes
at the left.
(1.27)
.050
Thk = (0.8)
.031
Rotaries
01
(9.19)
.362
Material: Polyamide
Finish: Matte
(11.43)
.450
(16.36)
.644
(5.84) R
.230
Colors Available:
A, B, C, E, F, G, H
(11.43)
.450
(11.8)
.465
(1.8)
.071
Touch
(1.8)
.071 (11.8)
.465
AT466 .453” (11.5mm)
False Illuminated Rocker
(8.6)
.339
False Illuminator
Acrylonitrile Butadiene Styrene
(11.3)
.445
Indicators
Material:
Finish:
Colors:
Rocker
Polycarbonate
Glossy
Black
(7.7)
.303
White and Red
(1.8)
.071
(11.5)
.453
Accessories
S
(2.36)
.093
Material: Polyamide
Finish: Matte
(7.11)
(6.3) .280
.248
Colors Available:
A, B, C, E, F, G, H
AT4151
.450” (11.43mm)
Wide Paddle
Tactiles
G
Tilt
AT4150
.450” (11.43mm)
Wide Rocker
Slides
ROCKERS & PADDLES
F
(11.8)
.465
A
Black
B
White
C
Red
E
Yellow
www.nkkswitches.com
F
Green
G
Blue
H
Supplement
When a bezel is selected with AT466, glossy polycarbonate AT207 is supplied.
Cap Colors
Available:
Rockers
Toggles
Snap-In Mount Miniature Rockers
Gray
B67
Series M
OPTIONAL SNAP-IN BEZELS & BEZEL COLORS
1
B
AT2107 Bezel
AT208 Bezel
for AT070 LED
Material:
Polycarbonate
Yellow
A
(11.8)
.465
(19.0)
.748
Single Pole Double Pole
Gray
(15.6)
.614
AT212 Bezel
for AT617 LED
A
(13.1)mm
.516”
B
(6.25)mm
.246”
(6.55)mm
.258”
A
(12.0)
.472
(10.0)
.394
Finish:
Semi-glossy
(8.0)
.315
Tilt
Touch
Finish:
Semi-glossy
(10.0)
.394
(8.0)
.315
A
(15.9)
.626
A
Single Pole Double Pole
A
A
(12.0)
.472
(2.2)
.087
(18.4)mm
.724”
Black
(21.5) Sq
.846
(18.7)mm
.736”
(15.9)
.626
LED colors &
specifications
on next page.
(7.8)
.307
(11.8)
.465
(5.0) Typ
.197
(15.9)
.626
LED colors &
specifications
on next page.
(2.2)
.087
(7.8)
.307
(11.8)
.465 (21.5) Sq
.846
(2.0) Typ
.079
(8.8) Dia
.346
A
Single Pole Double Pole
A
(18.4)mm
.724”
(18.7)mm
.736”
Bezel Assembly
1. Pry out tab on bezel to
a 45° angle.
Accessories
Indicators
AT213 Bezel
for AT618 LED
(13.1)mm
.516”
(13.8)
.543
Black
Tactiles
(3.0) Dia Typ
.118
(12.5)mm
.492”
B
(12.5)mm
.492”
(30.2)
1.19
(5.4) Dia
.213
Material:
Polycarbonate
A
LED colors & specifications
on next page.
(12.0)
.472
Contact factory
for matte finish.
4
A
Blue
Single Pole Double Pole
Finish: Glossy
3
H
(15.9)
.626
Green
Black
(2.2)
.087
(13.5)
.531
Material:
Polycarbonate
Slides
E
(21.5)
.846
G
White
(12.0)
.472
(15.6)
.614
F
Black
B
(2.2)
.087
Finish: Matte
2
A
(11.8)
.465
Material: Polyamide
Rotaries
Keylocks
Programmable Illuminated PB
Pushbuttons
Rockers
Toggles
Snap-In Mount Miniature Rockers
Tab
2. Insert switch frame under
tab and snap on bezel.
3. Push tab back into place.
45°
Supplement
Tab
B68
www.nkkswitches.com
4. Snap assembled bezel
and switch into panel.
Series M
Toggles
Snap-In Mount Miniature Rockers
LED COLORS & SPECIFICATIONS
B
(5.0)
.197
(5.0)
.197
Top LED
Circuit Mark This Side
Circuit Mark This Side
Top LED
Bottom LED
(7.0)
.276
(+)
(-)
Bottom LED
Programmable Illuminated PB
(7.7)
.303
Pushbuttons
(3.0) Dia
.118
(-)
(+)
(-)
(+)
Note: Lead lengths may differ from manufacturing lot to lot. The longer lead is the anode (+).
AT617
AT618
Keylocks
AT070
C
F
C
E
F
C
E
F
Color
Red
Green
Red
Yellow
Green
Red
Yellow
Green
Maximum Forward Current
IFM
25mA
50mA
30mA
30mA
25mA
25mA
30mA
25mA
Typical Forward Current
IF
20mA
30mA
20mA
20mA
20mA
20mA
20mA
20mA
Forward Voltage
VF
2.8V
2.1V
2.0V
2.1V
2.2V
2.25V
2.1V
2.2V
Maximum Reverse Voltage
VRM
4V
5V
5V
5V
5V
5V
5V
5V
Current Reduction Rate
Above 25°C
∆IF
0.33
mA/°C
0.40
mA/°C
0.40
mA/°C
0.40
mA/°C
0.33
mA/°C
0.33
mA/°C
0.40
mA/°C
0.33
mA/°C
(-)
Ambient Temperature Range
(when used with a bezel)
–10° ~ +70°C
–15° ~ +70°C
–25° ~ +70°C
Tactiles
(+)
The electrical specifications shown are determined at a basic temperature of 25°C.
LED circuit is independent of switch operation. LED is colored in OFF state.
Tilt
If the source voltage is greater than the rated voltage of the LED, a ballast resistor must be connected in series with the lamp.
The ballast resistor calculation and more lamp detail are shown in the Supplement section.
Touch
LEGENDS
Indicators
NKK Switches can provide custom legends for caps. Contact factory for more information.
Suggested Printable Area for Cap
(0.76) Typ
.030
Pad Print
Epoxy based ink is recommended.
(4.5) Typ
.177
AT4150
www.nkkswitches.com
(9.91)
.390
(11.43)
.450
Accessories
Recommended Print Method:
(0.38) Typ
.015
(0.76) Typ (3.36) Typ
.132
.030
Supplement
F
OF
ON
Rotaries
(5.08) Dia
.200
AT618 LED
For Bezel AT213
with 2 Rectangular LEDs
Slides
AT617 LED
For Bezel AT212
with 2 Round LEDs
Circuit Mark This Side
AT070 LED
For Bezel AT208
with 1 LED
Rockers
Bezel Orientation on Switch
Shaded areas are printable areas.
B69
Series M
Toggles
Snap-In Mount Miniature Rockers
TYPICAL SWITCH DIMENSIONS
(4.9)
.194
(2.8) Circuit Mark
.110 This Side
(1.1) x (2.0) Typ
.043 x .079
3
(18.0)
.709
(4.7) Typ
.185
25°
(0.5)
.020
(7.1)
.279
(3.3)
.130
(13.0)
.512
2
(0.8) Typ
.031
(11.43)
.450
(12.2)
.480
1
(2.0) Typ
.079
(0.5)
.020
(9.4)
.371
(7.9)
.311
(4.5)
.177
M2012TJW01-FC
Snap-in Frame • Solder Lug
Double Pole
(4.9)
.194
Keylocks
Programmable Illuminated PB
Single Pole
B
Pushbuttons
Rockers
Snap-in Frame • Solder Lug
Rotaries
(18.0)
.709
(2.8) Circuit Mark
.110 This Side
(4.7) Typ
.185
25°
(0.8) Typ
.031
(11.43)
.450
(12.2)
.480
(0.5)
.020
(7.1)
.279
(3.3)
.130
(4.8)
.189
(1.1) x (2.0) Typ
.043 x .079
3
6
5
2
4
1
(13.0)
.512
(0.5)
.020
(9.4)
.371
(2.0) Typ
.079
(4.5)
.177
(12.7)
.500
Slides
M2022TJW01-FC
Snap-in Frame • Solder Lug
Single Pole
Circuit Mark
This Side
Tactiles
(2.8)
.110
(1.1) x (2.0) Typ
.043 x .079
3
(18.0)
.709
(4.7) Typ
.185
25°
(2.36)
.093
(3.18)
.125
(13.7)
.539
Snap-in Frame • Solder Lug
(2.0) Typ
.079
(0.5)
.020
(9.4)
.371
(7.9)
.311
(4.5)
.177
Double Pole
(2.8)
.110
Circuit Mark
This Side
(4.8)
.189
(1.1) x (2.0) Typ
.043 x .079
6
(18.0)
.709
Accessories
Supplement
(0.5)
.020
(7.1)
.279
M2012TJW01-GC
Indicators
Touch
Tilt
(0.8) Typ
.031
(11.43)
.450
(12.2)
.480
(13.0)
.512
2
1
(4.7) Typ
.185
25°
(0.8) Typ
.031
(2.36)
.093
(11.43)
.450
(12.2)
.480
(3.18)
.125
(13.7)
.539
M2022TJW01-GC
B70
www.nkkswitches.com
(0.5)
.020
(7.1)
.279
(9.4)
.371
(4.5)
.177
(0.5)
.020
3
5
2
4
1
(12.7)
.500
(13.0)
.512
(2.0) Typ
.079
Series M
Toggles
Snap-In Mount Miniature Rockers
TYPICAL SWITCH DIMENSIONS
(4.8)
.189
1
(0.8) Typ
.031
(4.3)
.169
(2.2)
.087
(6.4)
.252
(4.01)
.158
(9.4)
.371
Double Pole
(4.9)
.193
Circuit Mark (1.1) x (2.0) Typ
This Side
.043 x .079
(13.5)
.531
(12.0)
.472
(2.5)
.098
(0.61) Sq
.024
(4.7) Typ
.185
25°
(0.8) Typ
.031
(11.43)
.450
(11.8)
.465
(15.6)
.614
(4.3)
.169
(2.2)
.087
(6.4)
.252
(4.01)
.158
(5.6)
.221
(7.8)
.307
3
2
4
1
(0.5)
.020
(4.5)
.177
(9.4)
.371
(13.0)
.512
(14.0)
.551
(2.0) Typ
.079
(4.8)
.189
(12.7)
.500
Single Pole
(10.0)
.394
6
5
Keylocks
(30.2)
1.190
M2012TJW01-FC-1A
Snap-in Frame • AT208 Bezel • Solder Lug
(15.3) Min
.602
(19.0)
.748
1
Rotaries
(5.08) Dia
.200
4
(13.0)
.512
(14.0)
.551
(12.7)
.500
(7.9)
.311
(4.5)
.177
2
(2.0) Typ
.079
(2.0)
.079
(0.5)
.020
5
M2022TJW01-FC-2A-C
Snap-in Frame • AT212 Bezel • Solder Lug
Circuit Mark
This Side
(1.1) x (2.0) Typ
.043 x .079
Tactiles
(11.43)
.450
(11.8)
.465
(15.6)
.614
(13.0)
.512
(14.0)
.551
2
Pushbuttons
(4.7) Typ
.185
25°
3
(8.0)
.315
(12.0)
.472
(4.7) Typ
.185
25°
(13.0)
.512
(14.0)
.551
2
(0.8) Typ
.031
1
(4.01)
.158
(9.4)
.371
(4.5)
.177
(0.5)
.020
Double Pole
(10.0)
.394
(5.6)
.221
(7.8)
.307
(8.0)
.315
(12.0)
.472
Circuit Mark
This Side
(2.0)
.079
(7.9)
.311
M2012TJW01-FC-3A-CF
Snap-in Frame • AT213 Bezel • Solder Lug
(1.1) x (2.0) Typ
.043 x .079
(4.7) Typ
.185
25°
(0.8) Typ
.031
6
3
5
2
4
1
(13.0)
.512
Indicators
(4.3)
.169
(2.2)
.087
(6.4)
.252
(14.0)
.551
Accessories
(11.43)
.450
(11.8)
.465
(21.5) Sq
.846
Tilt
(3.0) Dia Typ
.118
(5.0) Typ
.197
(2.0)
.079
(11.43)
.450
(11.8)
.465
(21.5) Sq
.846
(4.01)
.158
(4.3)
.169
(2.2)
.087
(6.4)
.252
(0.5)
.020
(9.4)
.371
(4.5)
.177
(4.8)
.189
(12.7)
.500
(2.0) Typ
.079
M2022TJW01-FC-4A-CF
www.nkkswitches.com
Touch
(12.0)
.472
B71
Supplement
(21.5)
.846
B
3
6
3
Programmable Illuminated PB
Circuit Mark
This Side
Rockers
Snap-in Frame • AT2107 Bezel • Solder Lug
(1.1) x (2.0) Typ
.043 x .079
Slides
Single & Double Pole
(5.6)
.221
Series M
TYPICAL SWITCH
M20
B
Pushbuttons
Rockers
Toggles
Bracket PC Mount Miniature Rockers
1
3
Slides
G
Mounting Frames
1
SPDT
2
DPDT
SP3T
3
3PDT (used only
with terminal codes
30 & 41 & frame
code TX)
4
4PDT
DP3T
(used only with
terminal code 41 &
frame code TX)
TX
Narrow Frame
for Small Actuator
TZ
Wide Frame
for Large Actuator
Contact Materials & Ratings
Circuits
2
ON
NONE
ON
3
ON
OFF
ON
5
ON
NONE
(ON)
8
(ON)
OFF
(ON)
9
ON
OFF
(ON)
*4
ON
ON
ON
*6
(ON)
ON
(ON)
*7
ON
ON
(ON)
Rotaries
Keylocks
Programmable Illuminated PB
Poles
TX
W
Silver; Rated
6A @ 125V AC & 3A @ 250V AC
G
Gold; Rated
0.4VA max @ 28V AC/DC max
A
Gold over Silver; Rated
6A @ 125V AC & 0.4VA max @
28V AC/DC max
( ) = Momentary
Touch
Tilt
Tactiles
* 3-ON circuits
DESCRIPTION FOR TYPICAL ORDERING EXAMPLE
Indicators
M2013TXG41-DC
Accessories
SPDT
ON-OFF-ON Circuit
Gold Contacts with
0.4VA Rating
TX Frame with .365” (9.27mm)
Wide Red Rocker
Supplement
.150” (3.81mm)
Vertical PC Terminals with Support
B72
www.nkkswitches.com
Series M
ORDERING EXAMPLE
Terminals For
TX & TZ Frames
Rockers
& Paddles
Straight PC with Bracket
(1-2 Pole only)
Small Actuators
(TX Frame)
Rocker & Paddle
Colors
A
Black
White
C
Red
E
.365” (9.27mm)
Wide Paddle
E
Yellow
F
Green
F
.450” (11.43mm)
Wide Rocker
G
Blue
H
Gray
G
.450” (11.43mm)
Wide Paddle
15
.425” (10.8mm) Straight PC with
.630” (16.0mm) Bracket
17
.964” (24.5mm) Straight PC with
1.150” (29.2mm) Bracket
23
.250” (6.35mm) Straight PC with
.465” (11.8mm) Bracket
25
.425” (10.8mm) Straight PC with
.630” (16.0mm) Bracket
J
.595” (15.11mm)
Wide Rocker
26
.750” (19.05mm) Straight PC with
.953” (24.2mm) Bracket
H
.595” (15.11mm)
Wide Paddle
Keylocks
B
D
Straight PC with Reinforced Bracket
(1-2 Pole only)
B
.365” (9.27mm)
Wide Rocker
.250” (6.35mm) Straight PC with
.465” (11.8mm) Bracket
Slides
Rotaries
Large Actuators
(TZ Frame)
Terminals For
TX Frame Only
Right Angle PC with Support
(1-3 Pole only)
Switches are supplied without UL & CSA marking unless specified.
UL & CSA recognized only when ordered with marking on the switch.
Specific models, ratings and ordering instructions are noted on the
General Specifications page.
.150” (3.81mm) Right Angle PC
Touch
.150” (3.81mm) Vertical PC
DESCRIPTION FOR TYPICAL ORDERING EXAMPLE
Indicators
M2022TZG23-JC
TZ Frame with .595” (15.11mm)
Wide Red Rocker
DPDT
ON-NONE-ON Circuit
Accessories
41
Tilt
Vertical PC with Support
(1-4 Pole)
Gold Contacts with 0.4VA Rating
.250” (6.35mm) Straight PC Terminals
with Reinforced Bracket
www.nkkswitches.com
Supplement
30
IMPORTANT:
Tactiles
13
C
Pushbuttons
D
Programmable Illuminated PB
41
Rockers
Toggles
Bracket PC Mount Miniature Rockers
B73
Series M
Toggles
Bracket PC Mount Miniature Rockers
POLES & CIRCUITS
Rocker Position
) = Momentary
B
Programmable Illuminated PB
Down
Center
Up
Down
Model
SP
M2012
M2013
*M2015
M2018
*M2019
ON
ON
ON
(ON)
ON
NONE
OFF
NONE
OFF
OFF
ON
ON
(ON)
(ON)
(ON)
M2022
M2023
*M2025
M2028
*M2029
ON
ON
ON
(ON)
ON
NONE
OFF
NONE
OFF
OFF
ON
ON
(ON)
(ON)
(ON)
M2022
M2023
*M2025
M2028
*M2029
ON
ON
ON
(ON)
ON
NONE
OFF
NONE
OFF
OFF
ON
ON
(ON)
(ON)
(ON)
2-3 5-6
8-9
M2042
M2043
*M2045
M2048
*M2049
ON
ON
ON
(ON)
ON
NONE
OFF
NONE
OFF
OFF
ON
ON
(ON)
(ON)
(ON)
2-3 5-6
8-9 11-12
DP
3P
Rotaries
Keylocks
Connected Terminals
Pole
Pushbuttons
Rockers
(
Slides
4P
Center
Throw & Schematics
Up
Note: Terminal numbers are not actually
on the switch.
* Reverse circuits available for vertical
mount SP & DP upon request.
SPDT
2-3
OPEN
2 (COM)
2-1
3
1
DPDT
2-3 5-6
OPEN
2
2-1 5-4
(COM)
3
5
1
6
4
3PDT
2-1 5-4
8-7
OPEN
2
3
5
1
(COM)
6
4
8
9
7
8
11
4PDT
2-1 5-4
8-7 11-10
OPEN
5
2
3
1
(COM)
9
4
6
7
12
10
Tilt
Tactiles
For 3 Throw (3-On)
Connected Terminals & Schematics
Pole
SP
Model
M2024
M2026
M2027
Down
Center
ON
(ON)
ON
ON
ON
ON
Up
ON
(ON)
(ON)
Down
Center
External
Connection
2 (in)
5
External
Connection
2 (in)
5
1 (out)
3 4 (out) 6 (out)
1 (out)
M2044
M2046
M2047
ON
(ON)
ON
Accessories
DP
The SP3T model utilizes a
double pole base.
Supplement
Indicators
Touch
2-3 5-6
External connection must be
made during field installation.
B74
ON
ON
ON
External
Connection
2 (in)
5
ON
(ON)
(ON)
External
Conn
External
Connection
2 (in)
5
External
Connection
8 (in)
11
2-3 5-6
8-9 11-12
6
3
5
2
4
1
(out)
3 4 (out) 6 (out)
1 (out)
2-1 5-4
1 (out) 3 4 (out) 6 (out) 7 (out) 9 10 (out) 12 (out)
2-3 5-4
8-9 11-10
External connection must be
made during field installation.
www.nkkswitches.com
External
Connection
8 (in)
11
External
Connection
2 (in)
5
3 4 (out) 6 (out) 7 (out) 9 10 (out) 12 (out)
Common
(in)
3 4 (out) 6 (out)
1 (out)
External
Connection
8 (in)
11
The DP3T model utilizes a
four pole base.
(out)
External
Connection
2 (in)
5
2-3 5-4
1 (out) 3 4 (out) 6 (out) 7 (out) 9 10 (out) 12 (out)
(out)
Up
2-1 5-4
8-7 11-10
(out)
External
Conn
Common
(in)
(out)
(out)
12
9
11
8
5
2
10
7
4
1
(out)
6
3
(out)
Common
(in)
(out)
Series M
MOUNTING FRAMES
Narrow Mounting Frame for Small Actuators
with Straight PC Terminals (codes 13, 15, 17, 23, 25, & 26)
or with Angle PC Terminals (codes 30 & 41)
(2.54) Dia
.100
(8.0)
.315
(1.4) Typ
.055
(3.5)
.138
25°
25°
(2.54) Dia
.100
(2.54) Dia
.100
(4.37)
.172
(0.4) Typ
.016
(5.08)
.200
(2.75)
.108
Pushbuttons
(5.08)
.200
25°
B
Vertical PC Mounting
(6.0)
.235
(1.27)
.050
Small Actuators & Panel Cutouts for TX Frame (actuator details on the following pages)
AT4149
AT4150
(12.7)
.500
TZ
Wide Mounting Frame
for Large Actuators
with Straight PC Terminals
(codes 13, 15, 17, 23, 25, & 26)
Rotaries
(12.4)
.490
(10.1)
.398
Direction of Actuation
Direction of Actuation
(17.8)
.701
AT4151
Large Actuators & Panel Cutouts for TZ Frame
(actuator details on the following pages)
AT4156
Slides
AT4148
Programmable Illuminated PB
Right Angle PC Mounting
Keylocks
Straight PC Mounting
AT4157
(2.54) Dia
.100
Tilt
(3.5)
.138
Direction of Actuation
(28.5)
1.122
25°
Tactiles
TX
Rockers
Toggles
Bracket PC Mount Miniature Rockers
(16.0)
.630
Silver over Silver
Power Level
6A @ 125V AC & 3A @ 250V AC
G
Gold over Brass or Copper
Logic Level
0.4VA maximum @ 28V AC/DC maximum
Indicators
W
Touch
CONTACT MATERIALS & RATINGS
Gold over Silver
Power Level
or Logic Level
6A @ 125V AC
or 0.4VA maximum @ 28V AC/DC maximum
Supplement
A
Accessories
Note: See Supplement section to find complete explanation of operating range.
Note: This dual rated option is suitable when two or more identical switches are used in logic and in power circuits within the
same application. See Supplement section to find complete explanation of dual rating and operating range.
www.nkkswitches.com
B75
Series M
TERMINALS
For TX and TZ 1-2 Pole
Straight PC Mount with Bracket
B
13
15
.250” (6.35mm)
Terminal with
.465” (11.8mm)
Bracket
For TX and TZ 1-2 Pole
Straight PC Mount with Reinforced Bracket
17
.425” (10.8mm)
Terminal with
.630” (16.0mm)
Bracket
23
.964” (24.5mm)
Terminal with
1.150” (29.2mm)
Bracket
25
.250” (6.35mm)
Terminal with
.465” (11.8mm)
Bracket
26
.425” (10.8mm)
Terminal with
.630” (16.0mm)
Bracket
.750” (19.05mm)
Terminal with
.953” (24.2mm)
Bracket
Keylocks
Programmable Illuminated PB
Pushbuttons
Rockers
Toggles
Bracket PC Mount Miniature Rockers
PCB footprints are on the following Typical Switch Dimension pages.
For TX 1-3 Pole Right Angle PC Mount
.150” (3.81mm)
Right Angle PC
41
.150” (3.81mm)
Vertical PC
ROCKERS & PADDLES FOR TX MOUNTING FRAMES
D
AT4148 .365” (9.27mm)
Wide Rocker
Material: Polyamide
Finish: Matte
E
(9.27)
.365
Tilt
Tactiles
Slides
Rotaries
30
For TX 1-4 Pole Vertical PC Mount
AT4149 .365” (9.27mm)
Wide Paddle
(9.27)
(16.87)
.664
(13.49)
.531
(2.13)
.084
.365
Material: Polyamide
Finish: Matte
(3.96)
.156
(18.8)
.740
Touch
(3.5)
.138
Material: Polyamide
Finish: Matte
G
(11.43)
.450
AT4151 .450” (11.43mm)
Wide Paddle
(2.36)
.093
(11.43)
.450
Material: Polyamide
Finish: Matte
(11.8)
.465
(9.19)
.362
(3.18)
.125
(16.36)
.644
(7.7)
.303
(8.1) (6.3)
.319 .248
Supplement
(3.5)
.138
Cap Colors
Available:
B76
A
Black
B
White
C
Red
(3.5)
.138
(16.8)
.661
AT4150 .450” (11.43mm)
Wide Rocker
Accessories
Indicators
F
(8.43) R
.332
(8.8)
.346
(7.9) (6.15)
.311 .242
(5.84) R
.230
(11.8)
.465
E
www.nkkswitches.com
Yellow
F
Green
G
Blue
H
Gray
(3.5)
.138
Series M
ROCKERS & PADDLES FOR TZ MOUNTING FRAMES
AT4156 .595” (15.11mm)
Wide Rocker
H
B
Material: Polyamide
Finish: Matte
(2.36)
.093
(14.33)
.564
(26.78)
1.054
(29.82)
1.174
(23.01)
.906
(7.3)
.287
(3.5)
.138
A
(13.5) R
.531
(11.0)
.433
(8.4) (6.5)
.331 .256
Black
B
White
Programmable Illuminated PB
(4.75)
.187
(15.11)
.595
Cap Colors
Available:
Pushbuttons
Material: Polyamide
Finish: Matte
AT4157 .595” (15.11mm)
Wide Paddle
C
E
Red
Yellow
(3.5)
.138
(26.8)
1.055
(15.11)
.595
F
Green
G
Blue
H
Gray
Keylocks
J
OPTIONAL SNAP-IN PANEL FRAMES
Material: Polyamide
Finish: Matte
Color: Black
(25.04)
.986
(15.62)
.615
Tactiles
(6.68)
.263
Mounted separately from switches
A
B
Tilt
Cutout Tolerances:
Dimension A:
.797” ~ .803” (20.24 ~ 20.4mm)
Dimension B:
.495” ~ .505” (12.57 ~ 12.83mm)
(2.3)
.090
(9.9)
.390
(17.9)
.705
Slides
AT064-2
Accommodates .062” ~ .125”
(1.57 ~ 3.18mm) panel thickness
Rotaries
Used with AT4148 Rocker and AT4149 Paddle
AT064-1
Accommodates .047” ~ .090”
(1.2 ~ 2.3mm) panel thickness
Rockers
Toggles
Bracket PC Mount Miniature Rockers
AT064–1 Enlarged Detail
Material: Polyamide
Finish: Matte
Color: Black
(15.62)
.615
(12.0)
.472
(2.3)
.090
(19.43)
.765
Accessories
(6.68)
.263
Mounted separately from switches
Cutout Tolerances:
Dimension A:
.595” ~ .605” (15.11 ~ 15.37mm)
Dimension B:
.495” ~ .500” (12.57 ~ 12.7mm)
(12.8)
.504
Indicators
AT065-2
Accommodates .062” ~ .125”
(1.57 ~ 3.18mm) panel thickness
A
B
AT065–1 Enlarged Detail
www.nkkswitches.com
AT065–2 Enlarged Detail
B77
Supplement
AT065-1
Accommodates .047” ~ .090”
(1.2 ~ 2.3mm) panel thickness
Touch
Used with AT4150 Rocker and AT4151 Paddle
Series M
Toggles
Bracket PC Mount Miniature Rockers
TYPICAL SWITCH DIMENSIONS
Straight PC • Bracket
B
Programmable Illuminated PB
TE RMI NAL
LE NGTH
Single
Pole
Double
Pole
Circuit Mark
This Side
(3.5)
.138
B R AC KE T
LE N GT H
2
1
(0.5) Typ
.020
(0.8) Typ
.031
(4.7) Typ
.185
(4.8) Typ
.189
3
(1.17) Typ
.046
(1.17) Typ
.046
(8.0)
.315
(15.8)
.622
(4.8)
.189
(3.2) Typ
.126
(12.7)
.500
M2012TXG13-DC
Keylocks
Terminal
Code:
Rotaries
Slides
(8.8)
.346
(6.15)
.242
Pushbuttons
Rockers
25°
Terminal
Length:
Bracket
Length:
(1.6) Typ
.063
(2.4) Typ
.095
(1.6) Typ
.063
13
.250” (6.35mm)
.465” (11.8mm)
15
.425” (10.8mm)
.630” (16.0mm)
17
.964” (24.5mm)
1.150” (29.2mm)
(7.9) Typ
.311
(4.7) Typ
.185
3
(7.9) Typ
.311
2
(4.7) Typ
.185
1
(1.8) Dia Typ
.073
(1.5) Dia Typ
.059
(1.8) Dia Typ
.073
(1.5) Dia Typ
.059
3
6
2
5
1
4
CL
Straight PC • Reinforced Bracket
25°
(8.8)
.346
Tactiles
(6.15)
.242
Tilt
Touch
(0.5) Typ
.020
(0.8) Typ
.031
(4.7) Typ
.185
Double
Pole
Circuit Mark
This Side
(3.5)
.138
TE RMI NAL
LE NGTH
Single
Pole
B R AC KE T
LE N GT H
2
1
(4.8) Typ
.189
3
(1.17) Typ
.046
(1.17) Typ
.046
(9.1)
.358
(19.05)
.750
(12.7)
.500
(6.35) Typ
.250
(4.8)
.189
Terminal
Code:
Terminal
Length:
Bracket
Length:
Accessories
23
.250” (6.35mm)
.465” (11.8mm)
25
.425” (10.8mm)
.630” (16.0mm)
Supplement
Indicators
M2012TXG23-DC
26
.750” (19.05mm)
.953” (24.2mm)
B78
www.nkkswitches.com
(2.4) Typ
.095
(3.18) Typ
.125
(3.18) Typ
.125
(9.53) Typ
.375
3
(9.53) Typ
.375
2
(4.7) Typ
.185
(1.8) Dia Typ
.073
(1.5) Dia Typ
.059
1
(4.7) Typ
.185
(1.8) Dia Typ
.073
(1.5) Dia Typ
.059
3
6
2
5
1
4
CL
Series M
Toggles
Bracket PC Mount Miniature Rockers
TYPICAL SWITCH DIMENSIONS
B
1
2
3
(7.9)
.311
(9.27)
.365
(5.41)
.213
3
2
(4.7) Typ
.185
1
(4.3)
.169
(0.4)
.016
(2.85)
.112
(1.4) Typ
.055
(5.08)
.200
(5.5)
.217
(4.0)
.157
(12.7)
.500
(6.15)
.242
(8.8)
.346
(1.27)
.050
(12.7)
.500
(0.8) Typ
.031
(4.7) Typ
.185
(13.0)
.512
Pushbuttons
Pivot
Programmable Illuminated PB
Shown in
Down Position
(1.8) Dia Typ
.073
(2.54) Typ
.100
M2012TXG30-DC
Double Pole
Shown in
Down Position
(9.27)
.365
5
6
1
2
3
(12.7)
.500
6
5
4
3
2
1
(6.15)
.242
(0.4) Typ
.016
(4.0)
.157
(12.7)
.500
(0.8) Typ
.031
(4.7) Typ
.185
(13.0)
.512
(3.81)
.150
(2.54) Typ
.100
(1.8) Dia Typ
.073
Tactiles
(8.8)
.346
(1.27) Typ
.050
(3.81)
.150
(4.7) Typ
.185
(12.7)
.500
(4.3)
.169
(2.85)
.112
(1.4) Typ
.055
(5.08)
.200
Rotaries
Pivot
Slides
(6.4)
.252
.150” (3.81mm) Right Angle PC
4
Rockers
.150” (3.81mm) Right Angle PC
Keylocks
Single Pole
Shown in
Down Position
Pivot
9
4
5
6
1
2
9
(17.5)
.689
(6.15)
.242
(8.8)
.346
(0.4)
.016
(4.5)
.177
(14.35)
.565
(1.27) Typ
.050
(3.81) Typ
.150
7
6
5
4
3
2
1
(4.7) Typ
.185
(3.81) Typ
.150
3
(4.3)
.169
(2.85)
.112
(1.4) Typ
.055
(5.08)
.200
8
Indicators
8
(0.8) Typ
.031
(4.7) Typ
.185
(13.0)
.512
(14.35)
.565
Accessories
(9.27)
.365
7
(2.54) Typ
.100
(1.8) Dia Typ
.073
Supplement
(8.8)
.346
.150” (3.81mm) Right Angle PC
Touch
Three Pole
M2032TXG30-DC
www.nkkswitches.com
Tilt
M2022TXG30-DC
B79
Series M
Toggles
Bracket PC Mount Miniature Rockers
TYPICAL SWITCH DIMENSIONS
Rockers
.150” (3.81mm) Vertical PC
Single Pole
B
(8.8)
.346
(9.27)
.365
(3.5)
.138
3
Pushbuttons
25°
(9.1)
.360
(3.81) Typ
.150
1
(3.18)
.125
(12.7)
.500
(1.27)
.050
(12.7)
.500
(2.74)
.108
Shown in
(6.15) (5.97)
Down Position .242 .235
(0.4) Typ
.016
(5.08)
.200
(0.8) Typ
.031
(3.81) Typ
.150
(1.27)
.050
(7.9)
.311
(2.54) Typ
.100
(1.8) Dia Typ
.073
M2012TXG41-DC
.150” (3.81mm) Vertical PC
Double Pole
(9.27)
.365
(8.8)
.346
Keylocks
Programmable Illuminated PB
2
(13.0)
.512
(3.5)
.138
25°
(9.1)
.360
Rotaries
(0.4) Typ
.016
(5.08)
.200
(1.27)
.050
(12.7)
.500
3
5
2
4
(3.18)
.125
(2.74)
.108
(6.15) (5.97)
Shown in
Down Position .242 .235
6
(0.8) Typ
.031
(3.81) Typ
.150
(13.0)
.512
1
3
6
2
5
1
4
(2.4) Typ
.094
(3.81) Typ
.150
(12.7)
.500
(1.27) Typ
.050
(4.8)
.189
(12.7)
.500
(2.54) Typ
.100
(1.8) Dia Typ
.073
Slides
M2022TXG41-DC
.150” (3.81mm) Vertical PC
Three Pole
(9.27)
.365
Tactiles
(8.8)
.346
(3.5)
.138
25°
(9.1)
.360
Tilt
(0.4) Typ
.016
(5.08)
.200
9
6
3
8
5
2
7
4
1
(13.0)
.512
3
6
9
2
5
8
1
4
7
(3.18)
.125
(2.74)
.108
Shown in
Down Position
(6.15) (5.97)
.242 .235
(1.27)
.050
(14.35)
.565
(2.54) Typ
.100
(1.8) Dia Typ
.073
Four Pole
(9.27)
.365
Indicators
Touch
M2032TXG41-DC
.150” (3.81mm) Vertical PC
(8.8)
.346
(3.5)
.138
25°
Accessories
(9.1)
.360
Supplement
(0.4) Typ
.016
(5.08)
.200
(2.74)
.108
(6.15) (5.97)
Shown in
Down Position .242 .235
12
9
6
3
11
8
5
2
10
7
4
(13.0)
.512
1
(3.18)
.125
(1.27)
.050
(14.35)
.565
M2042TXG41-DC
B80
(3.81) Typ
.150
(14.35)
.565
(1.27) Typ
.050
(4.8) Typ
.189
(17.5)
.689
(0.8) Typ
.031
(3.81) Typ
.150
(4.8) Typ
.189
www.nkkswitches.com
(0.8) Typ
.031
(3.81) Typ
.150
3
6
9
12
2
5
8
11
1
4
7
10
(4.8) Typ
.189
(3.81) Typ
.150
(14.35)
.565
(4.8) Typ
.189
(22.3)
.878
(1.27) Typ
.050
(2.54) Typ
.100
(1.8) Dia Typ
.073
Series M
Toggles
Bracket PC Mount Miniature Rockers
TYPICAL SWITCH DIMENSIONS
25°
2
Pushbuttons
B R AC KE T
LE N GT H
(4.8) Typ
.189
3
(1.17) Typ
.046
(1.17) Typ
.046
(15.8)
.622
(8.0)
.315
(12.7)
.500
Programmable Illuminated PB
1
(0.6) Typ
.024
(0.8) Typ
.031
(4.7) Typ
.185
B
Double
Pole
Circuit Mark
This Side
(3.5)
.138
T ERMIN A L
LEN G T H
Single
Pole
(4.8)
.189
(3.2) Typ
.126
3
(7.9) Typ
.311
(7.9) Typ
.311
2
(4.7) Typ
.185
3
6
2
5
1
4
(4.7) Typ
.185
1
(1.8) Dia Typ
.073
(1.5) Dia Typ
.059
(1.8) Dia Typ
.073
(1.5) Dia Typ
.059
CL
Terminal
Code:
Terminal
Length:
Bracket
Length:
13
.250” (6.35mm)
.465” (11.8mm)
15
.425” (10.8mm)
.630” (16.0mm)
17
.964” (24.5mm)
1.150” (29.2mm)
Rotaries
(1.6) Typ
.063
(2.4) Typ
.095
(1.6) Typ
.063
Keylocks
M2012TZG13-JC
Straight PC • Reinforced Bracket
Slides
(11.0)
.433
(6.6)
.260
Rockers
Straight PC • Bracket
25°
Tactiles
(4.8) Typ
.189
3
(1.17) Typ
.046
(1.17) Typ
.046
(19.05)
.750
(9.1)
.358
(12.7)
.500
(6.35) Typ
.250
(4.8)
.189
Touch
2
1
BRACKET
LENGTH
(9.53) Typ
.375
3
(9.53) Typ
.375
2
(4.7) Typ
.185
(1.8) Dia Typ
.073
(1.5) Dia Typ
.059
1
(4.7) Typ
.185
(1.8) Dia Typ
.073
(1.5) Dia Typ
.059
3
6
2
5
1
4
CL
Terminal
Code:
Terminal
Length:
Bracket
Length:
23
.250” (6.35mm)
.465” (11.8mm)
25
.425” (10.8mm)
.630” (16.0mm)
26
.750” (19.05mm)
.953” (24.2mm)
www.nkkswitches.com
Accessories
(2.4) Typ
.095
(3.18) Typ
.125
(3.18) Typ
.125
Indicators
M2012TZG23-JC
Supplement
(0.5) Typ
.020
(0.8) Typ
.031
(4.7) Typ
.185
Double
Pole
Circuit Mark
This Side
(3.5)
.138
T E RMIN A L
LENGTH
Single
Pole
Tilt
(11.0)
.433
(6.6)
.260
B81
Series M
Toggles
Bracket PC Mount Miniature Rockers
LEGENDS
Rockers
NKK Switches can provide custom legends for caps. Contact factory for more information.
B
Pushbuttons
Suggested Printable Area for Cap
AT4148
AT4150
ON
ON
F
OF
F
OF
F
OF
Programmable Illuminated PB
ON
Keylocks
(0.38) Typ
.015
(6.9) Typ
.272
(0.76) Typ
.030
(5.76) Typ
.227
(7.75)
.305
Rotaries
(9.27)
.365
AT4156
(0.76) Typ
.030
(0.38) Typ
.015
(4.5) Typ
.177
(0.76) Typ
.030
(0.76) Typ
.030
(3.36) Typ
.132
Slides
Recommended Print Method:
Pad Print
Epoxy based ink is recommended.
Supplement
Accessories
Indicators
Touch
Tilt
Tactiles
(10.03) Typ
.395
(11.18) Typ
.440
(9.91)
.390
(11.43)
.450
Shaded areas are printable areas.
B82
(0.38) Typ
.015
www.nkkswitches.com
(0.76) Typ
.030
(13.59)
.535
(15.11)
.595
(0.76) Typ
.030
Series M
TYPICAL SWITCH ORDERING EXAMPLE
1
2
TN
W
01
Poles
C
B
Rockers & Paddles
Mounting Frames
4
4PDT
DP3T
TY
.504” (12.8mm) Wide
Flat Frame
Contact Materials
& Ratings
Circuits
2
ON
NONE
ON
3
ON
OFF
ON
5
ON
NONE
(ON)
8
(ON)
OFF
(ON)
9
ON
OFF
(ON)
*4
ON
ON
ON
*6
(ON)
ON
(ON)
*7
ON
ON
(ON)
W
Silver; Rated 6A @ 125V
AC & 3A @ 250V AC
G
Gold; Rated 0.4VA max @
28V AC/DC max
A
Gold over Silver; Rated
6A @ 125V AC & 0.4VA
max @ 28V AC/DC max
E
.365” (9.27mm)
Wide Paddle
F
.450” (11.43mm)
Wide Rocker
G
.450” (11.43mm)
Wide Paddle
Large Actuators (TY Frame)
J
.595” (15.11mm)
Wide Rocker
H
.595” (15.11mm)
Wide Paddle
Rocker & Paddle
Colors
Terminals
( ) = Momentary
* 3-ON circuits
Programmable Illuminated PB
3PDT
.365” (9.27mm)
Wide Rocker
01
Solder Lug
03
.250” (6.35mm)
Straight PC
IMPORTANT:
A
Black
B
White
C
Red
E
Yellow
F
Green
G
Blue
H
Gray
Tilt
Switches are supplied without UL & CSA marking unless specified.
UL & CSA recognized only when ordered with marking on the switch.
Specific models, ratings and ordering instructions are noted on the
General Specifications page.
Keylocks
3
D
Rotaries
TN
Slides
DPDT
SP3T
Small Actuators (TN Frame)
Tactiles
2
.272” (6.9mm) Wide
Flat Frame
Touch
SPDT
DESCRIPTION FOR TYPICAL ORDERING EXAMPLE
Indicators
M2012TNW01-DC
Accessories
Red .365” (9.27mm)
Wide Rocker
.272” (6.9mm) Wide
Flat Frame
SPDT
ON-NONE-ON Circuit
Silver Contacts
with 6-Amp Rating
Solder Lug Terminals
www.nkkswitches.com
Supplement
1
D
Pushbuttons
M20
Rockers
Toggles
Flat Frame Mount Miniature Rockers
B83
Series M
Toggles
Flat Frame Mount Miniature Rockers
POLES & CIRCUITS
Rocker Position
) = Momentary
B
Center
Up
M2012
M2013
M2015
M2018
M2019
ON
ON
ON
(ON)
ON
NONE
OFF
NONE
OFF
OFF
ON
ON
(ON)
(ON)
(ON)
M2022
M2023
M2025
M2028
M2029
ON
ON
ON
(ON)
ON
NONE
OFF
NONE
OFF
OFF
ON
ON
(ON)
(ON)
(ON)
M2032
M2033
M2035
M2038
M2039
ON
ON
ON
(ON)
ON
NONE
OFF
NONE
OFF
OFF
ON
ON
(ON)
(ON)
(ON)
M2042
M2043
M2045
M2048
M2049
ON
ON
ON
(ON)
ON
NONE
OFF
NONE
OFF
OFF
ON
ON
(ON)
(ON)
(ON)
Model
SP
DP
3P
4P
Connected Terminals
Down
Pole
Slides
Rotaries
Keylocks
Programmable Illuminated PB
Pushbuttons
Rockers
(
Down
Center
Throw & Schematics
Up
Note: Terminal numbers are not actually
on the switch.
SPDT
2-3
OPEN
2 (COM)
2-1
3
1
DPDT
2-3 5-6
OPEN
2
2-1 5-4
(COM)
3
1
5
6
4
3PDT
2-3 5-6
8-9
2-1 5-4
8-7
OPEN
2
3
5
1
(COM)
6
4
8
9
7
8
11
4PDT
2-3 5-6
8-9 11-12
2-1 5-4
8-7 11-10
OPEN
5
2
3
1
(COM)
9
4
6
7
12
10
For 3 Throw (3-On)
Tilt
Tactiles
Connected Terminals & Schematics
Pole
SP
Model
M2024
M2026
M2027
Down
Center
ON
(ON)
ON
ON
ON
ON
Up
ON
(ON)
(ON)
Down
Center
External
Connection
2 (in)
5
External
Connection
2 (in)
5
1 (out)
3 4 (out) 6 (out)
1 (out)
Touch
2-3 5-6
Supplement
Accessories
Indicators
DP
M2044
M2046
M2047
ON
(ON)
ON
ON
ON
ON
External
Connection
2 (in)
5
ON
(ON)
(ON)
External
Connection
5
2 (in)
External
Connection
8 (in)
11
2-3 5-6
8-9 11-12
External connection must be
made during field installation.
B84
6
3
5
2
4
1
(out)
1 (out)
2-1 5-4
External
Connection
11
8 (in)
(out)
1 (out) 3 4 (out) 6 (out) 7 (out) 9 10 (out) 12 (out)
2-3 5-4
8-9 11-10
2-1 5-4
8-7 11-10
(out)
External
Conn
Common
(in)
External connection must be
made during field installation.
www.nkkswitches.com
External
Connection
8 (in)
11
External
Connection
2 (in)
5
3 4 (out) 6 (out) 7 (out) 9 10 (out) 12 (out)
Common
(in)
3 4 (out) 6 (out)
1 (out)
3 4 (out) 6 (out)
The DP3T model utilizes a
four pole base.
(out)
External
Conn
External
Connection
2 (in)
5
2-3 5-4
1 (out) 3 4 (out) 6 (out) 7 (out) 9 10 (out) 12 (out)
The SP3T model utilizes a
double pole base.
Up
(out)
(out)
12
9
11
8
5
2
10
7
4
1
(out)
6
3
(out)
Common
(in)
(out)
Series M
MOUNTING FRAMES
(6.9)
.272
B
Pushbuttons
(3.5)
.138
(29.5) (23.8)
1.161 .937
(0.6)
.024
Programmable Illuminated PB
Mounting hardware kit HK-1, as shown on the
following page, must be ordered separately.
(2.4) Dia Typ
.094
Small Actuators & Panel Cutouts for TN Frame (actuator details on the following pages)
AT4149
AT4150
AT4151
(17.8)
.701
(23.8)
.937
(10.1)
.398
TY
(12.7)
.500
(23.8)
.937
(2.6) Dia Typ
.102
(12.4)
.490
(2.6) Dia Typ
.102
Large Actuators & Panel Cutout for TY Frame
(actuator details on the following pages)
.504” (12.8mm)
Wide Flat Frame
AT4157
Tactiles
AT4156
Slides
AT4148
Keylocks
.272” (6.9mm)
Wide Flat Frame
Rotaries
TN
Rockers
Toggles
Flat Frame Mount Miniature Rockers
Touch
Tilt
Mounting hardware kit HK-2, as shown on the
following page, must be ordered separately.
(3.2) Dia Typ
.126
www.nkkswitches.com
(3.5) Dia Typ
.138
Supplement
(16.0)
.630
Accessories
(28.5)
1.122
(34.9)
1.374
(41.3) (34.9)
1.626 1.374
(0.6)
.024
Indicators
(12.8)
.504
(3.5)
.138
B85
Series M
Toggles
Flat Frame Mount Miniature Rockers
MOUNTING FRAMES (CONTINUED)
Subpanel Mounting
B
Pushbuttons
Rockers
Face Panel Mounting
Programmable Illuminated PB
S TANDOFF
LE NGTH
Flat frame devices may
also be mounted to the
face panel. Standoffs
are used to recess the
actuator and achieve
an attractive front panel
appearance.
These devices are especially
designed for subpanel mounting.
When installed on a mounting
plate behind the panel, hardware
is completely concealed and
the front panel retains a clean,
attractive appearance.
Optional Snap-in Panel Frames
Optional Hardware Kits
for Subpanel or Face Panel Mounting
Panel
Thickness
Frame
Standoff
Length
Further
details are
shown in
the previous
bracketed
PC mount
subsection.
Hardware
Kit Number
TN Frame
.125” (3.175mm) .233” (5.918mm)
ATHK-1
TY Frame
.125” (3.175mm) .312” (7.925mm)
ATHK-2
Keylocks
Hardware kits include:
2 stainless steel screws, 2 hex nuts, 2 lockwashers, & 2 standoffs
AT064-1
AT064-2
AT065-1
AT065-2
W
Silver over Silver
Power Level
6A @ 125V AC & 3A @ 250V AC
G
Gold over Brass or Copper
Logic Level
0.4VA maximum @ 28V AC/DC maximum
Slides
Rotaries
CONTACT MATERIALS & RATINGS
Note: See Supplement section to find complete explanation of operating range.
Tactiles
A
Power Level
or Logic Level
Gold over Silver
6A @ 125V AC
or 0.4VA maximum @ 28V AC/DC maximum
Note: This dual rated option is suitable when two or more identical switches are used in logic and in power circuits within the
same application. See Supplement section to find complete explanation of dual rating and operating range.
Tilt
TERMINALS
Touch
01
Solder Lug
(4.0)
.157
Epoxy Seal
(2.0)
.079
Indicators
(2.0)
(1.1) .079
.043
Thk = (0.8)
.031
03
.250” (6.35mm)
Straight PC
(4.8)
.189
Accessories
3
2
Epoxy Seal
(6.35)
(4.8) .250
.189
Supplement
(1.17)
.046
Thk = (0.8)
.031
B86
(4.7) Typ
.185
1
(1.8) Dia Typ
.073
Single Pole
3
6
2
5
1
4
(4.7) Typ
.185
(1.8) Dia Typ
.073
Double Pole
www.nkkswitches.com
3
6
9
2
5
8
1
4
7
(4.8) Typ
.189
(4.7) Typ
.185
(1.8) Dia Typ
.073
Three Pole
3
6
9
12
2
5
8
11
1
4
7
10
(4.8) Typ
.189
(4.7) Typ
.185
(1.8) Dia Typ
.073
Four Pole
Series M
Toggles
Flat Frame Mount Miniature Rockers
ROCKERS & PADDLES
AT4148 .365” (9.27mm)
Wide Rocker
AT4149 .365” (9.27mm)
Wide Paddle
E
(2.13)
.084
(9.27)
.365
(16.87)
.664
(13.49)
.531
(3.96)
.156
(18.8)
.740
(3.5)
.138
Keylocks
AT4151 .450” (11.43mm)
Wide Paddle
G
Material: Polyamide
Finish: Matte
(2.36)
.093
(11.43)
.450
(11.8)
.465
(9.19)
.362
(3.18)
.125
(16.36)
.644
(7.7)
.303
(8.1) (6.3)
.319 .248
Rotaries
Material: Polyamide
Finish: Matte
(11.43)
.450
(3.5)
.138
(16.8)
.661
AT4150 .450” (11.43mm)
Wide Rocker
F
(8.43) R
.332
(8.8)
.346
(7.9) (6.15)
.311 .242
(3.5)
.138
(5.84) R
.230
Slides
(9.27)
.365
Pushbuttons
Material: Polyamide
Finish: Matte
Programmable Illuminated PB
Material: Polyamide
Finish: Matte
B
(3.5)
.138
(11.8)
.465
Tactiles
D
For TY Frame
AT4156 .595” (15.11mm)
Wide Rocker
H
Tilt
Material: Polyamide
Finish: Matte
(2.36)
.093
(14.33)
.564
Touch
Material: Polyamide
Finish: Matte
AT4157 .595” (15.11mm)
Wide Paddle
(29.82)
1.174
(23.01)
.906
(8.4) (6.5)
.331 .256
(7.3)
.287
(3.5)
.138
Cap Colors
Available:
A
(13.5) R
.531
(11.0)
.433
Black
B
White
(26.8)
1.055
(15.11)
.595
C
Red
E
Yellow
F
www.nkkswitches.com
Green
G
Blue
Accessories
(26.78)
1.054
Indicators
(4.75)
.187
(15.11)
.595
(3.5)
.138
H
Supplement
J
Rockers
For TN Frame
Gray
B87
Series M
Toggles
Flat Frame Mount Miniature Rockers
TYPICAL SWITCH DIMENSIONS
Rockers
TN Frame • Solder Lug
Single Pole
(2.4) Dia Typ
.094
(12.3)
.484
B
(3.5)
.138
Circuit Mark
This Side
(1.1) x (2.0) Typ
.043 x. 079
3
TN Frame • Solder Lug
(0.6)
.024
(10.3)
.406
1
(0.5)
.020
(2.0)
.079
(7.9)
.311
(4.5)
.177
Double Pole
(2.4) Dia Typ
.094
(12.3)
.484
(2.0) Typ
.079
(1.1) x (2.0) Typ
.043 x. 079
(3.5)
.138
Circuit Mark
This Side
Rotaries
(29.5)
1.161
(23.8)
.937
(4.7) Typ
.185
25°
(0.8) Typ
.031
(7.9)
.311
(9.65)
.380
(6.9)
.272
(9.27)
.365
M2022TNW01-DC
TN Frame • Solder Lug
(0.6)
.024
(10.3)
.406
(4.5)
.177
6
3
5
2
4
1
(0.5)
.020
(13.0)
.512
(4.8)
.189
(12.7)
.500
Three Pole
(12.3)
.484
(2.4) Dia Typ
.094
(3.5)
.138
(1.1) x (2.0) Typ
.043 x .079
(2.0) Typ
.079
Circuit Mark
This Side
Tactiles
Slides
(7.9)
.311
(9.65)
.380
(13.0)
.512
2
(0.8) Typ
.031
(6.9)
.272
(9.27)
.365
M2012TNW01-DC
(4.7) Typ
.185
25°
(29.5)
1.161
Keylocks
Programmable Illuminated PB
Pushbuttons
(23.8)
.937
(23.8)
.937
(4.7) Typ
.185
25°
(29.5)
1.161
6
3
8
5
2
7
4
1
(13.0)
.512
Touch
Tilt
(0.8) Typ
.031
9
(7.9)
.311
(9.65)
.380
(6.9)
.272
(9.27)
.365
M2032TNW01-DC
TN Frame • Solder Lug
(0.5)
.020
(4.8) Typ
.189
(4.5)
.177
(17.5)
.689
Four Pole
(12.3)
.484
Indicators
(2.4) Dia Typ
.094
(1.1) x (2.0) Typ
.043 x .079
(3.5)
.138
(2.0) Typ
.079
Circuit Mark
This Side
(23.8)
.937
(29.5)
1.161
Accessories
Supplement
(0.6)
.024
(12.4)
.488
M2042TNW01-DC
B88
(4.7) Typ
.185
25°
(0.8) Typ
.031
(6.9)
.272
(7.9)
.311
(9.27)
.365
(9.65)
.380
www.nkkswitches.com
9
6
3
11
8
5
2
10
7
4
1
(0.5)
.020
(0.6)
.024
(12.4)
.488
12
(4.5)
.177
(13.0)
.512
(4.8) Typ
.189
(22.3)
.878
Series M
Toggles
Flat Frame Mount Miniature Rockers
TYPICAL SWITCH DIMENSIONS
Double Pole
B
3
(4.7) Typ
.185
25°
2
(0.8) Typ
.031
(12.8)
.504
(15.11)
.595
(8.4)
.331
(10.0)
.394
(0.6)
.024
(10.0)
.394
(4.5)
.177
(13.0)
.512
6
3
5
2
4
1
1
(0.5)
.020
(7.9)
.311
(2.0)
.079
(4.8)
.189
(13.0)
.512
(2.0) Typ
.079
Double pole has barrier between terminals.
Three Pole
(14.5)
.571
M2012TYW01-JC
TY Frame • Solder Lug
(2.0) Typ
.079
(1.1) x (2.0) Typ
.043 x .079
(3.5)
.138
Rotaries
(3.2) Dia Typ
.126
Programmable Illuminated PB
(41.3)
1.626
(34.9)
1.374
Pushbuttons
Circuit Mark
This Side
Circuit Mark
This Side
25°
(0.8) Typ
.031
(8.4)
.331
(12.8)
.504
(15.11)
.595
(10.0)
.394
(0.6)
.024
(12.1)
.476
6
3
8
5
2
7
4
1
(13.0)
.512
Slides
(41.3)
1.626
(4.7) Typ
.185
(0.5)
.020
(4.8) Typ
.189
(4.5)
.177
(17.5)
.689
M2032TYW01-JC
Four Pole
(14.5)
.571
TY Frame • Solder Lug
(2.0) Typ
.079
(3.5)
.138
(1.1) x (2.0) Typ
.043 x .079
Touch
(3.2) Dia Typ
.126
Tactiles
9
(34.9)
1.374
25°
(0.8) Typ
.031
(12.8)
.504
(15.11)
.595
(8.4)
.331
(10.0)
.394
(0.6)
.024
(12.1)
.476
(0.5)
.020
(4.5)
.177
6
3
11
8
5
2
10
7
4
1
(22.3)
.878
(13.0)
.512
Accessories
(41.3)
1.626
9
(4.8) Typ
.189
Supplement
12
(4.7) Typ
.185
Indicators
Circuit Mark
This Side
(34.9)
1.374
Rockers
Single Pole
(1.1) x (2.0) Typ
.043 x .079
(3.5)
.138
Tilt
(14.5)
.571
(3.2) Dia Typ
.126
TY Frame • Solder Lug
Keylocks
M2042TYW01-JC
www.nkkswitches.com
B89
Series M
Toggles
Flat Frame Mount Miniature Rockers
LEGENDS
B
Suggested Printable Area for Caps
Pushbuttons
Rockers
NKK Switches can provide custom legends for caps. Contact factory for more information.
AT4148
AT4150
ON
ON
F
OF
F
OF
F
OF
Programmable Illuminated PB
ON
Keylocks
(0.38) Typ
.015
(6.9) Typ
.272
Rotaries
(0.76) Typ
.030
(5.76) Typ
.227
(7.75)
.305
(9.27)
.365
AT4156
(0.76) Typ
.030
(0.38) Typ
.015
(4.5) Typ
.177
(0.76) Typ
.030
(9.91)
.390
(11.43)
.450
(0.76) Typ
.030
(3.36) Typ
.132
Slides
Recommended Print Method:
Pad Print
Tactiles
(10.03) Typ
.395
(11.18) Typ
.440
Shaded areas are printable areas.
Supplement
Accessories
Indicators
Touch
Tilt
Epoxy based ink is recommended.
B90
(0.38) Typ
.015
www.nkkswitches.com
(0.76) Typ
.030
(13.59)
.535
(15.11)
.595
(0.76) Typ
.030
Similar pages