CTM600, CTM601, CTM611 10Mbit/s 5-Pin Mini-Flat Logic Gate Optocoupler Description Features • High speed 10MBit/s • High isolation voltage between input and output The CTM600, CTM601, and CTM611 optocouplers consist of an AlGaAS LED, optically coupled to a very high speed integrated photo-detector logic gate (Viso=3750 Vrms ) • Guaranteed CTR performance from 0°C to 70°C • Wide operating temperature range of -40°C to with a strobe able output. The output of the detect IC is a high speed logic gate integrated with a photo detector. The switching parameters are guaranteed 85°C over the temperature range of -40°C to +85°C. A • Green Package • Regulatory Approvals UL - UL1577 (E364000) VDE - EN60747-5-5(VDE0884-5) CQC – GB4943.1, GB8898 IEC60065, IEC60950 maximum input signal of 5mA will provide a minimum output sink current of 13mA (fan out of 8). Applications Package Outline • Line receivers • Telecommunication equipment • High speed logic ground isolation • Feedback loop in switch-mode power supplies • Home appliances Schematic Note: Different bending options available. See package dimension. CT Micro Proprietary & Confidential Page 1 Rev 2 Nov, 2015 CTM600, CTM601, CTM611 10Mbit/s 5-Pin Mini-Flat Logic Gate Optocoupler Absolute Maximum Rating at 25oC Symbol Parameters Ratings Units Notes 3750 VRMS 1 VISO Isolation voltage TOPR Operating temperature -40 ~ +100 oC TSTG Storage temperature -55 ~ +150 oC TSOL Soldering temperature 260 oC 2 Emitter IF Forward current 50 mA VR Reverse voltage 5 V PD Power dissipation 100 mW PD Power dissipation 85 mW IO Average Output current 50 mA VCC Supply voltage 7 V VO Output voltage 7 V Detector Notes 1. AC for 1 minute, RH = 40 ~ 60%. 2. For 10 second peak CT Micro Proprietary & Confidential Page 2 Rev 2 Nov, 2015 CTM600, CTM601, CTM611 10Mbit/s 5-Pin Mini-Flat Logic Gate Optocoupler Electrical Characteristics TA = 0 - 70°C (unless otherwise specified). Typical values are measured at TA = 250C and VCC=5V Emitter Characteristics Symbol Parameters Test Conditions Min Typ Max Units - 1.4 1.6 V VF Forward voltage IF = 10mA VR Reverse Voltage IR = 5µA 5.0 - - V IF =10mA - -1.6 - mV/°C Test Conditions Min Typ Max Units ∆VF/∆TA Notes Temperature coefficient of forward voltage Detector Characteristics Symbol Parameters ICCL Logic Low Supply Current IF=10mA, VO=Open, VCC=5V - 9 13 mA ICCH Logic High Supply Current IF=0mA, VO=Open, VCC=5V - 6 9 mA Min Typ Max Units 2 100 uA - 3.3 5 mA - 0.35 0.6 V Notes Transfer Characteristics Symbol Parameters IOH Logic High Output Current IFT Input Threshold Current VOL Logic Low Output Voltage Test Conditions IF=250uA, VO= 5.5V, Notes VCC=5.5V, VO=0.6V, IO=13mA CT Micro Proprietary & Confidential IF=5mA, IO=13mA, VCC=5.5V, Page 3 Rev 2 Nov, 2015 CTM600, CTM601, CTM611 10Mbit/s 5-Pin Mini-Flat Logic Gate Optocoupler Switching Characteristics Symbol TPHL TPLH Parameters Test Conditions Min Typ Max Units - 40 75 ns - 35 75 ns Notes Propagation Delay Time Logic High to Logic Low Propagation Delay Time Logic CL=15pF,RL=350Ω Low to Logic High Tr Output Rise Time - 40 - ns Tf Output Fall Time - 10 - ns - - - 5000 - - 20000 - - - - - 5000 - - 20000 - - IF = 7.5mA , VOH=2.0V, CTM600 RL=350Ω, TA=25°C, VCM=10Vp-p IF = 7.5mA , VOH=2.0V, Common Mode CMH Transient Immunity CTM601 RL=350Ω, TA=25°C, V/µs VCM=50Vp-p at Logic High IF = 7.5mA , VOH=2.0V, CTM611 RL=350Ω, TA=25°C, VCM=1000Vp-p IF = 0mA , VOL=0.8V, CTM600 RL=350Ω, TA=25°C, VCM=10Vp-p IF = 0mA , VOL=0.8V, Common Mode CML Transient Immunity CTM601 RL=350Ω, TA=25°C, V/µs VCM=50Vp-p at Logic Low IF = 0mA , VOL=0.8V, CTM611 RL=350Ω, TA=25°C, VCM=1000Vp-p CT Micro Proprietary & Confidential Page 4 Rev 2 Nov, 2015 CTM600, CTM601, CTM611 10Mbit/s 5-Pin Mini-Flat Logic Gate Optocoupler Typical Characteristic Curves CT Micro Proprietary & Confidential Page 5 Rev 2 Nov, 2015 CTM600, CTM601, CTM611 10Mbit/s 5-Pin Mini-Flat Logic Gate Optocoupler CT Micro Proprietary & Confidential Page 6 Rev 2 Nov, 2015 CTM600, CTM601, CTM611 10Mbit/s 5-Pin Mini-Flat Logic Gate Optocoupler Test Circuits Figure 11 Figure 12 CT Micro Proprietary & Confidential Page 7 Rev 2 Nov, 2015 CTM600, CTM601, CTM611 10Mbit/s 5-Pin Mini-Flat Logic Gate Optocoupler Test Circuits Figure 13 Figure 14 CT Micro Proprietary & Confidential Page 8 Rev 2 Nov, 2015 CTM600, CTM601, CTM611 10Mbit/s 5-Pin Mini-Flat Logic Gate Optocoupler Package Dimension Dimensions in mm unless otherwise stated Recommended Solder Mask Dimensions in mm unless otherwise stated CT Micro Proprietary & Confidential Page 9 Rev 2 Nov, 2015 CTM600, CTM601, CTM611 10Mbit/s 5-Pin Mini-Flat Logic Gate Optocoupler Device Marking CT 600 VYWWK CT : Denotes “CT Micro” 600 V Y WW : Product Number : VDE Option : Fiscal Year : Work Week K : Production Code Ordering Information CTM6XX(V)(Z) X = Part No. (00, 01, or 11) V = VDE option (V or none) Z = Tape and reel option (T1 or T2) Option Description Quantity T1 Surface Mount Lead Forming – With Option 1 Taping 3000 Units/Reel T2 Surface Mount Lead Forming – With Option 2 Taping 3000 Units/Reel CT Micro Proprietary & Confidential Page 10 Rev 2 Nov, 2015 CTM600, CTM601, CTM611 10Mbit/s 5-Pin Mini-Flat Logic Gate Optocoupler Carrier Tape Specifications Dimensions in mm unless otherwise stated Option T1 Option T2 CT Micro Proprietary & Confidential Page 11 Rev 2 Nov, 2015 CTM600, CTM601, CTM611 10Mbit/s 5-Pin Mini-Flat Logic Gate Optocoupler Reflow Profile Profile Feature Pb-Free Assembly Profile Temperature Min. (Tsmin) 150°C Temperature Max. (Tsmax) 200°C Time (ts) from (Tsmin to Tsmax) 60-120 seconds Ramp-up Rate (tL to tP) 3°C/second max. Liquidous Temperature (TL) 217°C Time (tL) Maintained Above (TL) 60 – 150 seconds Peak Body Package Temperature 260°C +0°C / -5°C Time (tP) within 5°C of 260°C 30 seconds Ramp-down Rate (TP to TL) 6°C/second max Time 25°C to Peak Temperature 8 minutes max. CT Micro Proprietary & Confidential Page 12 Rev 2 Nov, 2015 CTM600, CTM601, CTM611 10Mbit/s 5-Pin Mini-Flat Logic Gate Optocoupler DISCLAIMER CT MICRO RESERVES THE RIGHT TO MAKE CHANGES WITHOUT FURTHER NOTICE TO ANY PRODUCTS HEREIN TO IMPROVE RELIABILITY, FUNCTION OR DESIGN. CT MICRO DOES NOT ASSUME ANY LIABILITY ARISING OUT OF THE APPLICATION OR USE OF ANY PRODUCT OR CIRCUIT DESCRIBED HEREIN; NEITHER DOES IT CONVEY ANY LICENSE UNDER ITS PATENT RIGHTS, NOR THE RIGHTS OF OTHERS. ______________________________________________________________________________________ CT MICRO ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT EXPRESS WRITTEN APPROVAL OF CT MICRO INTERNATIONAL CORPORATION. 1. Life support devices or systems are devices or 2. A critical component is any component of a life systems which, (a) are intended for surgical support device or system whose failure to perform implant into the body, or (b) support or sustain life, can be reasonably expected to cause the failure of or (c) whose failure to perform when properly used the life support device or system, or to affect its in accordance with instruction for use provided in safety or effectiveness. the labelling, can be reasonably expected to result in significant injury to the user. CT Micro Proprietary & Confidential Page 13 Rev 2 Nov, 2015