7 8 THIS DRAWING IS UNPUBLISHED. C COPYRIGHT 2008 RELEASED FOR PUBLICATION 6 5 4 3 2 2008 LOC GP ALL RIGHTS RESERVED. BY - 1 2 PITCH BETWEEN PORTS OF ONE 1X3 CAGE ASSEMBLY. 3 SPACING BETWEEN CAGES ON THE SAME PC BOARD, TO BE SPECIFIED BY CUSTOMER, MUST COMPLY WITH MINIMUM DIMENSIONS SHOWN. D 3 MAX TYP DETAIL S SCALE 20:1 13 MATERIALS: CAGE ASSEMBLY: NICKEL SILVER, 0.25 THICK HEAT SINK: ALUMINUM HEAT SINK CLIP: STAINLESS STEEL EMI SPRING: COPPER ALLOY FRONT FLANGE: ZINC ALLOY LIGHT PIPE: CLEAR POLYCARBONATE 9 REVISIONS DIST 00 P LTR DIMENSION APPLIES WITH MODULE INSERTED IN CAGE. 10 UNPLATED THRU HOLE. 11 MAXIMUM HEIGHT OF LED OFF BOARD: 0.9mm. DESCRIPTION DATE DWN APVD D REVISED PER ECO-10-018054 04NOV2010 CJV EJB E REVISED PER ECO-12-005533 05APR2012 JY AC F REVISED PER ECO-14-016878 03DEC2014 RG MC 12. MATES WITH QSFP MSA COMPATIBLE TRANSCEIVER. 4 REFERENCE APPLICATION SPEC 114-13218 FOR RECOMMENDED DRILL HOLE DIAMETER AND PLATING THICKNESS. 5 DATUMS AND BASIC DIMENSIONS ESTABLISHED BY CUSTOMER. 6 DIMENSION C IS THE NOMINAL THICKNESS OF CUSTOMER SUPPLIED PC BOARD, SINGLE SIDED PC BOARD MIN THICKNESS = 1.45mm DOUBLE SIDED PC BOARD MIN THICKNESS = 2.2mm. 7 HEAT SINKS, LIGHT PIPES, AND CLIP SHIPPED ASSEMBLED TO CAGE ASSEMBLY. CAGE ASSEMBLY MAY BE PRESSED INTO THE PCB AS SHIPPED. 8 DATUM -A- 1 IS TOP SURFACE OF PC BOARD. 13 SURFACE TRACES PERMITTED WITHIN THIS AREA EXCEPT WHERE CAGE STANDOFFS, SHOWN IN DETAIL S, CONTACT PC BOARD. 14 BASELINE FOR THESE DIMENSIONS IS THE CENTER OF COMPLIANT PIN HOLE. 15 2D BARCODE AND DATE CODE (YYWWD) MARKED ON SIDE OF CAGE. 16 REFERENCE APP SPEC 114-13218 FOR GASKET THICKNESS CALCULATION. 17 FINISH: EMI SPRING: 2µm MINIMUM TIN FRONT FLANGE: 3µm MINIMUM TIN OVER 1.27µm MINIMUM NICKEL OVER 5.08µm MINIMUM COPPER HEATSINK: NICKEL 18 HEAT SINKS AND CLIPS SHIPPED ASSEMBLED TO CAGE ASSEMBLY. CAGE ASSEMBLY MAY BE PRESSED INTO THE PCB AS SHIPPED. LIGHT PIPES, SHIPPED UNATTACHED, MUST BE ASSEMBLED BY CUSTOMER AFTER THE CAGE IS SEATED IN THE PCB. D C C ( 60.57 ) 9 ( 60 ) ( 1.66 ) B MAX 2D BARCODE AND DATE CODE 2.2 MAX SEE DETAIL 15 S 2X ( 19 ) 2 B B EMI SPRINGS 7 7 18 A CAGE ASSEMBLY NETWORKING 2110412-3 13.7 PCI 2110412-1 16.0 SAN FRONT FLANGE THIS DRAWING IS A CONTROLLED DOCUMENT. mm MATERIAL -1 TOLERANCES UNLESS OTHERWISE SPECIFIED: 0 PLC 1 PLC 2 PLC 3 PLC 4 PLC ANGLES FINISH 0.1 0.1 - - 17 DWN 28FEB2008 CHK 28FEB2008 APVD 28FEB2008 C. VALENTINE J. PETERSON J. PETERSON PRODUCT SPEC 108-2286 APPLICATION SPEC - 114-13218 WEIGHT - CUSTOMER DRAWING 2110412-2 HEAT SINK PROFILE B DIMENSIONS: 4805 (3/11) 23.0 PART NUMBER A TE Connectivity NAME 1X3 CAGE ASSEMBLY, BEHIND BEZEL, W/ SQUARE LIGHT PIPES AND HEAT SINKS QSFP SIZE CAGE CODE A1 00779 DRAWING NO 2110412 SCALE 4:1 SHEET 1 OF RESTRICTED TO - 5 REV F 7 8 THIS DRAWING IS UNPUBLISHED. C COPYRIGHT 2008 RELEASED FOR PUBLICATION BY - 6 5 4 3 2 2008 LOC GP ALL RIGHTS RESERVED. 1 REVISIONS DIST 00 P LTR - SQUARE DOUBLE LIGHT PIPES QUANTITY: 3 D HEAT SINK CLIPS QUANTITY: 3 7 DESCRIPTION DATE SEE SHEET 1 7 DWN APVD - - - 18 D 18 C C 72 PIN HEAT SINKS QUANTITY: 3 7 18 B B 1X3 BEHIND BEZEL QSFP CAGE ASSEMBLY QUANTITY: 1 A A THIS DRAWING IS A CONTROLLED DOCUMENT. DIMENSIONS: mm MATERIAL 4805 (3/11) - TOLERANCES UNLESS OTHERWISE SPECIFIED: 0.1 0.1 - 0 PLC 1 PLC 2 PLC 3 PLC 4 PLC ANGLES FINISH - DWN 28FEB2008 CHK 28FEB2008 APVD 28FEB2008 C. VALENTINE J. PETERSON J. PETERSON PRODUCT SPEC 108-2286 APPLICATION SPEC - 114-13218 WEIGHT - CUSTOMER DRAWING TE Connectivity NAME 1X3 CAGE ASSEMBLY, BEHIND BEZEL, W/ SQUARE LIGHT PIPES AND HEAT SINKS QSFP SIZE CAGE CODE A1 00779 DRAWING NO 2110412 SCALE 4:1 SHEET 2 OF RESTRICTED TO - 5 REV F 7 8 THIS DRAWING IS UNPUBLISHED. C COPYRIGHT 2008 RELEASED FOR PUBLICATION BY - 6 5 4 3 2 2008 LOC GP ALL RIGHTS RESERVED. 1 REVISIONS DIST 00 P LTR - 3 60.5 0.1 MIN 22.08 6.16 TYP 3.08 TYP OUTLET FOR 2.8 # 0.1 SQUARE LIGHT PIPE LENS. TYP 9.7 APVD - - - BEZEL D 0.1 TYP 11 0.3 0.2 (0.4 # 0.1 FOR PCI APPLICATIONS) 57.5 SEE SHEET 1 DWN 0.2 TYP 13.35 R 0.3 MAX TYP DATE 48 MAX 5.2 MAX D DESCRIPTION 37 MAX 0.1 TYP GAP FOR EMI GASKET PROVIDED BY CUSTOMER GUIDE POSTS PER SPEC 16 ONE SIDED CONFIGURATION SCALE 3:1 C C 0.3 0.2 13.35 0.1 TYP B B (C+13.95) # 0.1 TYP (C+0.4) # 0.1 C 6 (THICKNESS OF PC BOARD) BELLY TO BELLY CONFIGURATION SIMILAR TO ONE SIDED EXCEPT WHERE NOTED SCALE 3:1 A A THIS DRAWING IS A CONTROLLED DOCUMENT. DIMENSIONS: mm MATERIAL 4805 (3/11) - TOLERANCES UNLESS OTHERWISE SPECIFIED: 0.1 0.1 - 0 PLC 1 PLC 2 PLC 3 PLC 4 PLC ANGLES FINISH - DWN 28FEB2008 CHK 28FEB2008 APVD 28FEB2008 C. VALENTINE J. PETERSON J. PETERSON PRODUCT SPEC 108-2286 APPLICATION SPEC - 114-13218 WEIGHT - CUSTOMER DRAWING TE Connectivity NAME 1X3 CAGE ASSEMBLY, BEHIND BEZEL, W/ SQUARE LIGHT PIPES AND HEAT SINKS QSFP SIZE CAGE CODE A1 00779 DRAWING NO 2110412 SCALE 4:1 SHEET 3 OF RESTRICTED TO - 5 REV F 7 8 THIS DRAWING IS UNPUBLISHED. C COPYRIGHT 2008 RELEASED FOR PUBLICATION 6 5 4 3 2 2008 LOC GP ALL RIGHTS RESERVED. BY - 1 REVISIONS DIST 00 P LTR - 57.2 M SEE DETAIL 4 D 14 8X SEE SHEET 1 n 1.55 APVD - - - M 10:1 18.5 19 D 14 0.1 MAX 4X 12.58 14 0.05 13 4X 6.42 6X q OF LED J SEE DETAIL 0.8 TYP 8X 5.4 2X DWN (1.05) -U- 10 DATE MAX DETAIL SCALE 17.38 DESCRIPTION 38X 0.35 0.03 0.4 8 38X 1 4.5 10.3 MAX 1.8 0.03 2.5 11.3 MIN C C 4X 2X 0.8 MIN 40.68 3X 5.18 3.05 MAX 37.7 8X 30.1 1.69 3X MAX 0.89 9 3X MIN 15.02 DETAIL J 3 PLACES SCALE 8:1 9 4.5 B 5 5 4 BSC B 1 MIN -X- 3.4 MIN 4X (1.05) -T- 5 4X BSC 1.1 5 -Y- 4 21X (1.05) 3 TO q OF FIRST ROW OF HOLES FOR NEXT ADJACENT CAGE 17.9 4X CROSS-HATCHED AREA DENOTES COMPONENT AND TRACE KEEP-OUT (EXCEPT CHASSIS GROUND) 19 59 MIN RECOMMENDED PC BOARD LAYOUT SINGLE SIDE MOUNT CONFIGURATION SCALE 4:1 A A THIS DRAWING IS A CONTROLLED DOCUMENT. DIMENSIONS: mm MATERIAL 4805 (3/11) MAX - TOLERANCES UNLESS OTHERWISE SPECIFIED: 0.1 0.1 - 0 PLC 1 PLC 2 PLC 3 PLC 4 PLC ANGLES FINISH - DWN 28FEB2008 CHK 28FEB2008 APVD 28FEB2008 C. VALENTINE J. PETERSON J. PETERSON PRODUCT SPEC 108-2286 APPLICATION SPEC - 114-13218 WEIGHT - CUSTOMER DRAWING TE Connectivity NAME 1X3 CAGE ASSEMBLY, BEHIND BEZEL, W/ SQUARE LIGHT PIPES AND HEAT SINKS QSFP SIZE CAGE CODE A1 00779 DRAWING NO 2110412 SCALE 4:1 SHEET 4 OF RESTRICTED TO - 5 REV F 7 8 THIS DRAWING IS UNPUBLISHED. C COPYRIGHT 2008 RELEASED FOR PUBLICATION 6 5 4 3 2 2008 LOC GP ALL RIGHTS RESERVED. BY - 1 REVISIONS DIST 00 P LTR - DATE SEE SHEET 1 DWN APVD - - - 3.25 3.25 15.25 2.13 DESCRIPTION 15.75 15.75 D D 4 4X 12.58 (1.05) 6X 4X 6.42 -U- 10 8X n 1.55 q OF LED K SEE DETAIL 0.05 8X 5.4 0.8 TYP 38X 0.35 0.03 0.4 4.5 38X 1 1.8 0.03 C C 2.5 8X 40.68 5.18 37.7 8X 30.1 B 5 5 7X BSC 4.5 -X4X 8 1.1 4 4X BSC (1.05) 4X -T- 5 -Y- 3.4 MIN 4 5 A 17.9 44X (1.05) 3 TO q OF FIRST ROW OF HOLES FOR NEXT ADJACENT CAGE 19 RECOMMENDED PC BOARD LAYOUT BELLY TO BELLY CONFIGURATION SEE SHEET 4 FOR COMPONENT AND TRACE KEEP-OUTS SCALE 4:1 A THIS DRAWING IS A CONTROLLED DOCUMENT. DIMENSIONS: mm MATERIAL 4805 (3/11) B DETAIL K SCALE 8:1 - TOLERANCES UNLESS OTHERWISE SPECIFIED: 0.1 0.1 - 0 PLC 1 PLC 2 PLC 3 PLC 4 PLC ANGLES FINISH - DWN 28FEB2008 CHK 28FEB2008 APVD 28FEB2008 C. VALENTINE J. PETERSON J. PETERSON PRODUCT SPEC 108-2286 APPLICATION SPEC - 114-13218 WEIGHT - CUSTOMER DRAWING TE Connectivity NAME 1X3 CAGE ASSEMBLY, BEHIND BEZEL, W/ SQUARE LIGHT PIPES AND HEAT SINKS QSFP SIZE CAGE CODE A1 00779 DRAWING NO 2110412 SCALE 4:1 SHEET 5 OF RESTRICTED TO - 5 REV F