EUROQUARTZ 5HS14G-D-T-25.000-X

EURO QUARTZ
HS14 and HSR14 Sine Wave Oscillators
14 pin Dual-in-line Sine Wave Clock Oscillators
FEATURES
Sine Wave output in industry-standard 14 DIL package
Choice of output loads
Harmonics -25dBc maximum
Very low current consumption <1.0mA for HSR14
OUTLINE & DIMENSIONS
DESCRIPTION
HS14 sine wave clock oscillators provide a true sine wave out output
while being packaged in the industry-standard, 14 pin DIL outline
package. The oscillator is capable of being produced with close
tolerances and exhibits low current consumption.
SPECIFICATION
Frequency Range
HS14 at 3.3 Volts:
HS14 at 5.0 Volts:
HSR14:
Input Voltage
HS14:
HSR14:
Output Wave Form:
Frequency Stability
0~70°C:
-40 ~+85°C:
Output Level
HS14:
HSR14
Harmonics:
Phase Noise:
Current Consumption:
Start-up Time:
Storage Temperature:
Sub-Harmonics:
Ageing: ±5ppm/year
Enable/Disable Option:
10.0MHz to 800.0MHz
10MHz to 156.0 MHz
10MHz to 30MHz
+3.3V or +5.0VDC ±5%
+2.8V, +3.3V or +5.0VDC ±5%
True sine wave
±25ppm, ±50ppm or ±100ppm*
±25ppm, ±50ppm or ±100ppm*
0dBm into 50 Ohms <5dBM available
10k //10pF load, level 1.0V p-p
-25dBc maximum
-130 dBC/Hz at 1kHz offset
See table
2.0ms typical
-55° to +125°C
None
Output is high impedance when pad 1
is taken LOW.
150ns maximum
(Add 'T' to the part number code for
this option.)
Compliant and Non-compliant
versions are available.
Disable time:
RoHS Status:
* Non-standard frequency stability is available, check with sales.
CURRENT CONSUMPTION
Type/Frequency
Supply Voltage (±5%)
+2.8
HS14
HS14
HS14
HSR14
10MHz
100MHz
150MHz
10MHz
1.0mA
+3.3V
+5.0V
9mA
18mA
19mA
1.1mA
18mA
34mA
36mA
1.2mA
PART NUMBERING
Example:
3HSR14G-B-T-25.000-X
Supply Voltage
28 = 2.8 Volts
3 = 3.3 Volts
5 = 5.0 Volts
Series Designation
HS14
HSR14
RoHS
G = Compliant
Blank = Non-compliant
Stability
A = ±25ppm 0° to +70°C
B = ±50ppm 0° to +70°C
C = ±100ppm 0° to +70°C
D = ±25ppm -40° to +85°C
E = ±50ppm -40° to +85°C
F = ±100ppm -40° to +85°C
Enable/Disable
T = implemented
Blank = not-implemented
Frequency (MHz)
Customer-Specific Code
(Included if specified by
engineering department.)
EUROQUARTZ LIMITED Blacknell Lane CREWKERNE Somerset UK TA18 7HE
Tel: +44 (0)1460 230000 Fax: +44 (0)1460 230001 Email: [email protected] www.euroquartz.co.uk