712 475 XM 20 D E K Series 74 Convoluted Tubing 712-475 Composite Conduit Bulkhead Feed-Through Adapter for Environmental or Non-Environmental Series 74 PEEK or Standard Tubing Style E Environmenal See Part Number Development Product Series Basic Number Gland Seal range Finish (Table II) G Dash No. (Table I) C Typ .125 (3.2) Max Panel thickness Typ D = D Hole Mounting Flats N = None E = Environmental Gland Seal Style (Omit for Standard Non-Environmental Style) 2.130 (54.1) Max 1.410 (35.8) Max Tubing I.D. E F A Thread Add Letter K for Adapter to accommodate PEEK Conduit D .500 (12.7) Ref Typ Panel Cut-Out Tubing shown for reference only See Note 2 .190 (4.8) Typ Knurl or Flute Style Manufacurer's Option, Typ. Non-Environmental (See Part Number Development) Table I Dash No. A Thread Class 2A B +.015 (0.4) -.000 (0.0) C Across Flats D +.000 (0.0) -.015 (0.4) E Max F Min G Max Tubing I.D. Min Max Gland Seal Range Min Max 06 M16 x 1.0 .640 (16.3) .875 (22.2) .595 (15.1) .500 (12.7) .162 (4.1) 1.020 (25.9) .181 (4.6) .187 (4.7) .156 (4.0) .250 (6.4) 09 M16 x 1.0 .640 (16.3) .875 (22.2) .595 (15.1) .600 (15.2) .244 (6.2) 1.020 (25.9) .273 (6.9) .281 (7.1) .156 (4.0) .250 (6.4) 10 M16 x 1.0 .640 (16.3) .875 (22.2) .595 (15.1) .630 (16.0) .274 (7.0) 1.020 (25.9) .306 (7.8) .312 (7.9) .156 (4.0) .250 (6.4) 12 M16 x 1.0 .640 (16.3) .875 (22.2) .595 (15.1) .700 (17.8) .326 (8.3) 1.020 (25.9) .364 (9.2) .375 (9.5) .188 (4.8) .312 (7.9) 14 M20 x 1.0 .802 (20.4) 1.062 (27.0) 1.752 (44.5) .760 (19.3) .382 (9.7) 1.180 (30.0) .427 (10.8) .437 (11.1) .250 (6.4) .438 (11.1) 16 M20 x 1.0 .802 (20.4) 1.062 (27.0) 1.752 (44.5) .850 (21.6) .434 (11.0) 1.180 (30.0) .485 (12.3) .500 (1.3) .250 (6.4) .438 (11.1) 20 M27 x 1.0 1.078 (27.4) 1.312 (33.3) 1.069 (27.2) .970 (24.6) .539 (13.7) 1.450 (36.8) .608 (15.4) .625 (15.9) .375 (9.5) .625 (15.9) 24 1-20 UNEF 1.005 (25.5) 1.312 (33.3) .937 (23.8) 1.140 (29.0) .649 (16.5) 1.390 (35.3) .730 (18.5) .750 (19.1) .375 (9.5) .625 (15.9) 28 M27 x 1.0 1.078 (27.4) 1.312 (33.3) 1.029 (26.1) 1.280 (32.5) .769 (19.5) 1.450 (36.8) .860 (21.8) .875 (22.2) .438 (11.1) .750 (19.1) 32 M36 x 1.0 1.437 (36.5) 1.750 (44.5) 1.403 (35.6) 1.450 (36.8) .868 (22.0) 1.810 (46.0) .975 (24.8) 1.000 (25.4) .625 (15.9) .938 (23.8) 40 1 1/2 -18 UNEF 1.505 (38.2) 1.750 (44.5) 1.437 (36.5) 1.760 (44.7) 1.078 (27.4) 1.890 (48.0) 1.210 (30.7) 1.250 (31.8) 48 1 3/4 -18 UNEF 1.755 (44.6) 2.000 (50.8) 1.687 (42.8) 2.060 (52.3) 1.200 (30.5) 2.140 (54.4) 1.437 (36.5) 1.500 (38.1) 1.000 (25.4) 1.375 (34.9) 56 2 -18 UNS 2.005 (50.9) 2.250 (57.2) 1.937 (49.2) 2.390 (60.7) 1.400 (35.6) 2.390 (60.7) 1.688 (42.9) 1.750 (44.5) 1.250 (31.8) 1.625 (41.3) 64 2 1/4 -16 UN 2.255 (57.3) 2.500 (63.5) 2.187 (55.5) 2.570 (65.3) 1.600 (40.6) 2.640 (67.1) 2.937 (74.6) 2.000 (50.8) 1.250 (31.8) 1.625 (41.3) .875 (22.2) 1.250 (31.8) Table TABLE II2 XM XW XB XO Electroless Nickel Cadmium Olive Drab Over Electroless Nickel No Plating - Black Material No Plating - Base Material Non-conductive © 2003 Glenair, Inc. NOTES: 1. Metric dimensions (mm) are in parentheses and are for reference only. 2. Convoluted tubing size, tubing to be ordered separately (See Page I-23). CAGE Codes 06324 Printed in U.S.A. GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com E-Mail: [email protected] D-33