74LVT2245, 74LVTH2245 Low Voltage Octal Bidirectional Transceiver with 3-STATE Inputs/Outputs and 25Ω Series Resistors in the B Port Outputs Features General Description ■ Input and output interface capability to systems at The LVT2245 and LVTH2245 contain eight non-inverting bidirectional buffers with 3-STATE outputs and are intended for bus-oriented applications. The Transmit/ Receive (T/R) input determines the direction of data flow through the bidirectional transceiver. Transmit (activeHIGH) enables data from A Ports to B Ports; Receive (active-LOW) enables data from B Ports to A Ports. The Output Enable input, when HIGH, disables both A and B Ports by placing them in a high impedance state. The equivalent 25Ω-series resistor in the B Port helps reduce output overshoot and undershoot. ■ ■ ■ ■ ■ ■ ■ 5V VCC Equivalent 25Ω series resistor on B Port outputs Bushold data inputs eliminate the need for external pull-up resistors to hold unused inputs (74LVTH2245), also available without bushold feature (74LVT2245) Live insertion/extraction permitted Power Up/Down high impedance provides glitch-free bus loading Outputs source/sink –12mA/+12mA on B Port, –32mA/+64mA on A Port Latch-up performance exceeds 500mA ESD performance: – Human-body model > 2000V – Machine model > 200V – Charged-device model > 1000V The LVTH2245 data inputs include bushold, eliminating the need for external pull-up resistors to hold unused inputs. These transceivers are designed for low voltage (3.3V) VCC applications, but with the capability to provide a TTL interface to a 5V environment. The LVT2245 and LVTH2245 are fabricated with an advanced BiCMOS technology to achieve high speed operation similar to 5V ABT while maintaining low power dissipation. Ordering Information Order Number Package Number Package Description 74LVT2245WM M20B 20-Lead Small Outline Integrated Circuit (SOIC), JEDEC MS-013, 0.300" Wide 74LVT2245SJ M20D 20-Lead Small Outline Package (SOP), EIAJ TYPE II, 5.3mm Wide 74LVT2245MTC MTC20 20-Lead Thin Shrink Small Outline Package (TSSOP), JEDEC MO-153, 4.4mm Wide 74LVTH2245WM M20B 20-Lead Small Outline Integrated Circuit (SOIC), JEDEC MS-013, 0.300" Wide 74LVTH2245SJ M20D 20-Lead Small Outline Package (SOP), EIAJ TYPE II, 5.3mm Wide 74LVTH2245MTC MTC20 20-Lead Thin Shrink Small Outline Package (TSSOP), JEDEC MO-153, 4.4mm Wide Device also available in Tape and Reel. Specify by appending suffix letter “X” to the ordering number. All packages are lead free per JEDEC: J-STD-020B standard. ©1999 Fairchild Semiconductor Corporation 74LVT2245, 74LVTH2245 Rev. 1.5.0 www.fairchildsemi.com 74LVT2245, 74LVTH2245 — Low Voltage Octal Bidirectional Transceiver with 3-STATE Inputs/Outputs and 25Ω Series Resistors in the B Port Outputs January 2008 Logic Symbols IEEE/IEC Pin Description Pin Names Description OE Output Enable Input T/R Transmit/Receive Input A0–A7 Side A Inputs or 3-STATE Outputs B0–B7 Side B Inputs or 3-STATE Outputs Truth Table Inputs OE T/R L L Bus B Data to Bus A L H Bus A Data to Bus B H X HIGH-Z State Outputs H = HIGH Voltage Level L = LOW Voltage Level X = Immaterial ©1999 Fairchild Semiconductor Corporation 74LVT2245, 74LVTH2245 Rev. 1.5.0 www.fairchildsemi.com 2 74LVT2245, 74LVTH2245 — Low Voltage Octal Bidirectional Transceiver with 3-STATE Inputs/Outputs and 25Ω Series Resistors in the B Port Outputs Connection Diagram Stresses exceeding the absolute maximum ratings may damage the device. The device may not function or be operable above the recommended operating conditions and stressing the parts to these levels is not recommended. In addition, extended exposure to stresses above the recommended operating conditions may affect device reliability. The absolute maximum ratings are stress ratings only. Symbol VCC Parameter Rating Supply Voltage –0.5V to +4.6V VI DC Input Voltage –0.5V to +7.0V VO DC Output Voltage Output in 3-STATE –0.5V to +7.0V Output in HIGH or LOW State(1) –0.5V to +7.0V DC Input Diode Current, VI < GND –50mA IOK DC Output Diode Current, VO < GND –50mA IO DC Output Current, VO > VCC IIK Output at HIGH State 64mA Output at LOW State 128mA ICC DC Supply Current per Supply Pin ±64mA IGND DC Ground Current per Ground Pin ±128mA TSTG Storage Temperature –65°C to +150°C Note: 1. IO Absolute Maximum Rating must be observed. Recommended Operating Conditions The Recommended Operating Conditions table defines the conditions for actual device operation. Recommended operating conditions are specified to ensure optimal performance to the datasheet specifications. Fairchild does not recommend exceeding them or designing to absolute maximum ratings. Symbol VCC Parameter Input Voltage IOH HIGH-Level Output Current IOL LOW-Level Output Current ∆t / ∆V Max Units 2.7 3.6 V 0 5.5 V A Port –32 mA B Port –12 A Port 64 B Port 12 Supply Voltage VI TA Min Free Air Operating Temperature Input Edge Rate, VIN = 0.8V–2.0V, VCC = 3.0V ©1999 Fairchild Semiconductor Corporation 74LVT2245, 74LVTH2245 Rev. 1.5.0 mA –40 +85 °C 0 10 ns/V www.fairchildsemi.com 3 74LVT2245, 74LVTH2245 — Low Voltage Octal Bidirectional Transceiver with 3-STATE Inputs/Outputs and 25Ω Series Resistors in the B Port Outputs Absolute Maximum Ratings TA = –40°C to +85°C Symbol Parameter VCC (V) VIK Input Clamp Diode Voltage VIH Input HIGH Voltage 2.7–3.6 VIL Input LOW Voltage 2.7–3.6 VOH Output HIGH Voltage A Port B Port VOL Output LOW Voltage A Port B Port II(HOLD)(2) II(OD)(2) II IOFF Bushold Input Minimum Drive 2.7 Conditions Min. II = –18mA VO ≤ 0.1V or VO ≥ VCC – 0.1V 2.0 2.7 IOH = –8mA 2.4 3.0 IOH = –32mA 2.0 Max. Units –1.2 V V 0.8 3.0 IOH = –12mA 2.0 2.7–3.6 IOH = –100µA VCC–0.2 V 2.7 IOL = 24mA 0.5 3.0 IOL = 16mA 0.4 3.0 IOL = 32mA 0.5 3.0 IOL = 64mA 0.55 3.0 IOL = 12mA 0.8 2.7 IOL = 100µA 0.2 3.0 VI = 0.8V 75 VI = 2.0V –75 (3) 500 (4) –500 3.0 Input Current 3.6 VI = 5.5V 10 Control Pins 3.6 VI = 0V or VCC ±1 Data Pins 3.6 VI = 0V –5 VI = VCC 1 Power Off Leakage Current 0 Power Up/Down, 3-STATE Current 0–1.5 IOZL 3-STATE Output Leakage Current 3.6 V µA Bushold Input Over-Drive Current to Change State IPU/PD V µA µA 0V ≤ VI or VO ≤ 5.5V ±100 µA VO = 0.5V to 3.0V, VI = GND or VCC ±100 µA VO = 0.5V –5 µA 3-STATE Output Leakage Current 3.6 VO = 0.0V –5 µA IOZH 3-STATE Output Leakage Current 3.6 VO = 3.0V 5 µA IOZH(2) 3-STATE Output Leakage Current 3.6 VO = 3.6V 5 µA IOZH+ 3-STATE Output Leakage Current 3.6 VCC < VO ≤ 5.5V 10 µA ICCH Power Supply Current 3.6 Outputs High 0.19 mA ICCL Power Supply Current 3.6 Outputs Low 5 mA IOZL (2) ICCZ Power Supply Current 3.6 Outputs Disabled 0.19 mA ICCZ+ Power Supply Current 3.6 VCC ≤ VO ≤ 5.5V, Outputs Disabled 0.19 mA ∆ICC Increase in Power Supply Current(5) 3.6 One Input at VCC – 0.6V, Other Inputs at VCC or GND 0.2 mA Notes: 2. Applies to Bushold versions only (74LVTH2245). 3. An external driver must source at least the specified current to switch from LOW-to-HIGH. 4. An external driver must sink at least the specified current to switch from HIGH-to-LOW. 5. This is the increase in supply current for each input that is at the specified voltage level rather than VCC or GND. ©1999 Fairchild Semiconductor Corporation 74LVT2245, 74LVTH2245 Rev. 1.5.0 www.fairchildsemi.com 4 74LVT2245, 74LVTH2245 — Low Voltage Octal Bidirectional Transceiver with 3-STATE Inputs/Outputs and 25Ω Series Resistors in the B Port Outputs DC Electrical Characteristics TA = 25°C Conditions Symbol Parameter CL = 50pF, RL = 500Ω VCC (V) VOLP Quiet Output Maximum Dynamic VOL 3.3 (7) VOLV Quiet Output Minimum Dynamic VOL 3.3 (7) Min. Typ. Max. Units 0.8 V –0.8 V Notes: 6. Characterized in SOIC package. Guaranteed parameter, but not tested. 7. Max number of outputs defined as (n). n–1 data inputs are driven 0V to 3V. Output under test held LOW. AC Electrical Characteristics TA = –40°C to +85°C, CL = 50pF, RL = 500Ω VCC = 3.3V ± 0.3V Symbol tPLH Parameter Min. Propagation Delay Data to B Port Output tPHL tPLH Propagation Delay Data to A Port Output tPHL tPZH Output Enable Time for B Port Output tPZL tPZH Output Enable Time for A Port Output tPZL tPHZ Output Disable Time for B Port Output tPLZ tPHZ Output Disable Time for A Port Output tPLZ Max. VCC = 2.7V Min. Max. Units ns 1.2 4.4 1.2 5.1 1.2 4.4 1.2 5.1 1.2 3.6 1.2 4.0 1.2 3.5 1.2 4.0 1.3 6.2 1.3 7.3 1.7 6.2 1.7 7.3 1.3 5.5 1.3 7.1 1.7 5.7 1.7 6.7 2.0 5.9 2.0 6.5 2.0 5.4 2.0 5.7 2.0 5.9 2.0 6.5 2.0 5.0 2.0 5.1 ns ns ns ns ns Skew(8) 1.0 1.0 ns tOSHL, tOSLH B Port Output to Output Skew(8) 1.0 1.0 ns tOSHL, tOSLH A Port Output to Output Note: 8. Skew is defined as the absolute value of the difference between the actual propagation delay for any two separate outputs of the same device. The specification applies to any outputs switching in the same direction, either HIGH-to-LOW (tOSHL) or LOW-to-HIGH (tOSLH). Capacitance(9) Symbol Parameter Conditions Typical Units CIN Input Capacitance VCC = 0V, VI = 0V or VCC 4 pF CI/O Input/Output Capacitance VCC = 3.0V, VO = 0V or VCC 8 pF Note: 9. Capacitance is measured at frequency f = 1MHz, per MIL-STD-883, Method 3012. ©1999 Fairchild Semiconductor Corporation 74LVT2245, 74LVTH2245 Rev. 1.5.0 www.fairchildsemi.com 5 74LVT2245, 74LVTH2245 — Low Voltage Octal Bidirectional Transceiver with 3-STATE Inputs/Outputs and 25Ω Series Resistors in the B Port Outputs Dynamic Switching Characteristics(6) 13.00 12.60 A 11.43 20 11 B 9.50 10.65 7.60 10.00 7.40 2.25 1 10 0.51 0.35 PIN ONE INDICATOR 0.25 M 0.65 1.27 1.27 C B A LAND PATTERN RECOMMENDATION 2.65 MAX SEE DETAIL A 0.33 0.20 C 0.75 0.25 X 45° SEATING PLANE NOTES: UNLESS OTHERWISE SPECIFIED (R0.10) GAGE PLANE (R0.10) 0.10 C 0.30 0.10 0.25 8° 0° A) THIS PACKAGE CONFORMS TO JEDEC MS-013, VARIATION AC, ISSUE E B) ALL DIMENSIONS ARE IN MILLIMETERS. C) DIMENSIONS DO NOT INCLUDE MOLD FLASH OR BURRS. D) CONFORMS TO ASME Y14.5M-1994 1.27 0.40 SEATING PLANE E) LANDPATTERN STANDARD: SOIC127P1030X265-20L (1.40) DETAIL A F) DRAWING FILENAME: MKT-M20BREV3 SCALE: 2:1 Figure 1. 20-Lead Small Outline Integrated Circuit (SOIC), JEDEC MS-013, 0.300" Wide Package drawings are provided as a service to customers considering Fairchild components. Drawings may change in any manner without notice. Please note the revision and/or date on the drawing and contact a Fairchild Semiconductor representative to verify or obtain the most recent revision. Package specifications do not expand the terms of Fairchild’s worldwide terms and conditions, specifically the warranty therein, which covers Fairchild products. Always visit Fairchild Semiconductor’s online packaging area for the most recent package drawings: http://www.fairchildsemi.com/packaging/ ©1999 Fairchild Semiconductor Corporation 74LVT2245, 74LVTH2245 Rev. 1.5.0 www.fairchildsemi.com 6 74LVT2245, 74LVTH2245 — Low Voltage Octal Bidirectional Transceiver with 3-STATE Inputs/Outputs and 25Ω Series Resistors in the B Port Outputs Physical Dimensions Figure 2. 20-Lead Small Outline Package (SOP), EIAJ TYPE II, 5.3mm Wide Package drawings are provided as a service to customers considering Fairchild components. Drawings may change in any manner without notice. Please note the revision and/or date on the drawing and contact a Fairchild Semiconductor representative to verify or obtain the most recent revision. Package specifications do not expand the terms of Fairchild’s worldwide terms and conditions, specifically the warranty therein, which covers Fairchild products. Always visit Fairchild Semiconductor’s online packaging area for the most recent package drawings: http://www.fairchildsemi.com/packaging/ ©1999 Fairchild Semiconductor Corporation 74LVT2245, 74LVTH2245 Rev. 1.5.0 www.fairchildsemi.com 7 74LVT2245, 74LVTH2245 — Low Voltage Octal Bidirectional Transceiver with 3-STATE Inputs/Outputs and 25Ω Series Resistors in the B Port Outputs Physical Dimensions (Continued) Figure 3. 20-Lead Thin Shrink Small Outline Package (TSSOP), JEDEC MO-153, 4.4mm Wide Package drawings are provided as a service to customers considering Fairchild components. Drawings may change in any manner without notice. Please note the revision and/or date on the drawing and contact a Fairchild Semiconductor representative to verify or obtain the most recent revision. Package specifications do not expand the terms of Fairchild’s worldwide terms and conditions, specifically the warranty therein, which covers Fairchild products. Always visit Fairchild Semiconductor’s online packaging area for the most recent package drawings: http://www.fairchildsemi.com/packaging/ ©1999 Fairchild Semiconductor Corporation 74LVT2245, 74LVTH2245 Rev. 1.5.0 www.fairchildsemi.com 8 74LVT2245, 74LVTH2245 — Low Voltage Octal Bidirectional Transceiver with 3-STATE Inputs/Outputs and 25Ω Series Resistors in the B Port Outputs Physical Dimensions (Continued) ACEx® Build it Now™ CorePLUS™ CROSSVOLT™ CTL™ Current Transfer Logic™ EcoSPARK® EZSWITCH™ * ™ PDP-SPM™ Power220® POWEREDGE® Power-SPM™ PowerTrench® Programmable Active Droop™ QFET® QS™ QT Optoelectronics™ Quiet Series™ RapidConfigure™ SMART START™ SPM® STEALTH™ SuperFET™ SuperSOT™-3 SuperSOT™-6 SuperSOT™-8 FPS™ FRFET® Global Power ResourceSM Green FPS™ Green FPS™e-Series™ GTO™ i-Lo™ IntelliMAX™ ISOPLANAR™ MegaBuck™ MICROCOUPLER™ MicroFET™ MicroPak™ MillerDrive™ Motion-SPM™ OPTOLOGIC® OPTOPLANAR® ® Fairchild® Fairchild Semiconductor® FACT Quiet Series™ FACT® FAST® FastvCore™ FlashWriter® * ® SupreMOS™ SyncFET™ ® The Power Franchise® TinyBoost™ TinyBuck™ TinyLogic® TINYOPTO™ TinyPower™ TinyPWM™ TinyWire™ µSerDes™ UHC® Ultra FRFET™ UniFET™ VCX™ * EZSWITCH™ and FlashWriter® are trademarks of System General Corporation, used under license by Fairchild Semiconductor. DISCLAIMER FAIRCHILD SEMICONDUCTOR RESERVES THE RIGHT TO MAKE CHANGES WITHOUT FURTHER NOTICE TO ANY PRODUCTS HEREIN TO IMPROVE RELIABILITY, FUNCTION, OR DESIGN. FAIRCHILD DOES NOT ASSUME ANY LIABILITY ARISING OUT OF THE APPLICATION OR USE OF ANY PRODUCT OR CIRCUIT DESCRIBED HEREIN; NEITHER DOES IT CONVEY ANY LICENSE UNDER ITS PATENT RIGHTS, NOR THE RIGHTS OF OTHERS. THESE SPECIFICATIONS DO NOT EXPAND THE TERMS OF FAIRCHILD’S WORLDWIDE TERMS AND CONDITIONS, SPECIFICALLY THE WARRANTY THEREIN, WHICH COVERS THESE PRODUCTS. LIFE SUPPORT POLICY FAIRCHILD’S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF FAIRCHILD SEMICONDUCTOR CORPORATION. As used herein: 1. Life support devices or systems are devices or systems which, (a) are intended for surgical implant into the body or (b) support or sustain life, and (c) whose failure to perform when properly used in accordance with instructions for use provided in the labeling, can be reasonably expected to result in a significant injury of the user. 2. A critical component in any component of a life support, device, or system whose failure to perform can be reasonably expected to cause the failure of the life support device or system, or to affect its safety or effectiveness. PRODUCT STATUS DEFINITIONS Definition of Terms Datasheet Identification Product Status Definition Advance Information Formative or In Design This datasheet contains the design specifications for product development. Specifications may change in any manner without notice. Preliminary First Production This datasheet contains preliminary data; supplementary data will be published at a later date. Fairchild Semiconductor reserves the right to make changes at any time without notice to improve design. No Identification Needed Full Production This datasheet contains final specifications. Fairchild Semiconductor reserves the right to make changes at any time without notice to improve the design. Obsolete Not In Production This datasheet contains specifications on a product that has been discontinued by Fairchild Semiconductor. The datasheet is printed for reference information only. Rev. I33 ©1999 Fairchild Semiconductor Corporation 74LVT2245, 74LVTH2245 Rev. 1.5.0 www.fairchildsemi.com 9 74LVT2245, 74LVTH2245 — Low Voltage Octal Bidirectional Transceiver with 3-STATE Inputs/Outputs and 25Ω Series Resistors in the B Port Outputs TRADEMARKS The following includes registered and unregistered trademarks and service marks, owned by Fairchild Semiconductor and/or its global subsidiaries, and is not intended to be an exhaustive list of all such trademarks.