Oscilent Corporation IF SAW Filter | 813-IF62.5M-A Page 1 of 2 IF SAW Filter Part Number Package Application Last Modified 813-IF62.5M-A 13.3 x 6.5 SMD Base Station & Repeater June 24 2004 . TYPE : 62.5 MHz Bandpass Filter 20.3 MHz Bandwidth PART NUMBER : 813-IF62.5M-A . Horizontal : 5.0 MHz/Div Veritical : 10 dB/Div Horizontal : 2.5 MHz/Div Veritical : 1 dB/Div Veritical : 100 ns/Div . OPERATING CONDITIONS / ELECTRICAL CHARACTERISTICS PARAMETERS Minimum Typical Maximum Units 62.42 62.50 62.58 MHz Insertion Loss - 20.5 - dB 1dB Bandwidth 19.75 19.85 - MHz 3dB Bandwidth 20.25 20.35 - MHz 40dB Bandwidth - 22.5 23.5 MHz Passband Ripple - 0.90 1.5 dB Group Delay Variation - 70 120 nsec Center Frequency - 1.10 - µsec Ultimate Rejection 40 45 - dB Substrate Material - 128LN - - Ambient Temperature - 25 - °C Absolute Delay * Custom SAW IF Filters available. Contact Oscilent for assistance. . PACKAGE OUTLINE (mm) TEST FIXTURE http://www.oscilent.com/spec_pages/if_sawfilter/if_813_if62_5a.htm 12/28/2005 Oscilent Corporation IF SAW Filter | 813-IF62.5M-A Page 2 of 2 L1 = 150nH C1 = 10pF L2 = 470nH C2 = 13pF Source/Load Impedance = 50 ohms Part No.: 813-IF62.5M-A Crystal Oscillators | Quartz Crystal | TCXO | VCXO | IF SAW Filter | RF SAW Filter | Ceramic Resonator Crystal Filter | Ceramic Filter | SAW Filter / SAW Devices | Site Map http://www.oscilent.com/spec_pages/if_sawfilter/if_813_if62_5a.htm 12/28/2005