Part Number 856929 140 MHz SAW Filter Data Sheet Features For Base Stations applications Usable 1.0 dB bandwidth of 18.4 MHz Low loss High Attenuation Single-ended operation, 50 Small Package Ceramic Surface Mount Package (SMP) Hermetic RoHS compliant (2002/95/EC), Pb-free Pb Package Pin Configuration Surface Mount 7.00 x 5.50 x 1.24 mm SMP-28C Bottom View 1 2 3 10 4 9 5 0.69 1.24 NOM. 1.35 MAX. 7.00 1.27 8 7 6 1.40 5.50 Pin No. 4 9 5,10 1,2,3 6,7,8 2.54 0.60 1.00 Description Output Input To be grounded Case ground Case ground Dimensions shown are nominal in millimeters All tolerances are 0.15mm except overall length and width 0.10mm Body: Al2O3 ceramic Lid: Kovar, Ni plated Terminations: Au plating 0.5 - 1.0 m, over a 2 - 6 m Ni plating Subject to change or obsolescence without notice Rev A 07/10 TriQuint Semiconductor, Inc. Page 1 of 5 Part Number 856929 140 MHz SAW Filter Data Sheet Electrical Specifications (1) Operating Temperature Range: (2) Parameter -30 to +80 oC (3) Minimum Typical Maximum Unit 149.2 149.5 126.8 - 140 9.1 19.9 129.9 150.2 21 129.4 150.4 24.3 128.2 152.5 10.25 130.8 130.5 153.2 MHz dB MHz MHz MHz MHz MHz MHz MHz MHz MHz - 0.35 0.8 dB p-p - 47 0.66 85 - ns p-p µsec 45 40 35 30 30 35 40 45 64 47 44 38 36 46 48 52 - dB dB dB dB dB dB dB dB - 1.5 2.0 - - 1.4 50 2.0 - Ω Center Frequency Insertion Loss @ 140 MHz (Fo) 1.0 dB Bandwidth Lower 1.0 dB Bandedge (4) Upper 1.0 dB Bandedge (4) 3.0 dB Bandwidth Lower 3.0 dB Bandedge (4) Upper 3.0 dB Bandedge (4) 30 dB Bandwidth (4) Lower 30 dB Bandedge Upper 30 dB Bandedge Amplitude Ripple (5) Over the 1 dB bandwidth Group Delay Ripple 130.8 -149.2 MHz Absolute Delay Relative Attenuation (4) 10 - 90 MHz 90 - 120 MHz 120 - 122.5 MHz 122.5 - 126.8 MHz 153.2 - 157.5 MHz 157.5 - 160 MHz 160 - 190.00 MHz 190 - 800 MHz Input VSWR (5) 130.8 -149.2 MHz Output VSWR (5) 130.8 -149.2 MHz Source/Load Impedance (6) Notes: 1. 2. All target specifications are based on TriQuint test circuit shown below In production, devices will be tested at room temperature to a guardbanded specification to ensure electrical compliance over temperature 3. Electrical margin has been built into the design to account for the variations due to temperature drift and manufacturing tolerances 4. Relative to Insertion Loss at center frequency 5. Describes the maximum peak to adjacent valley variation over the passband (not including roll-off) 6. This is the optimum impedance in order to achieve the performance shown Test Circuit: Actual Matching values may vary due to PCB layout and parasitics 150nH 9 50 Single-ended Input 50 Subject to change or obsolescence without notice 4 22nH 1,2,3,5 6,7,8,10 Rev A 50 07/10 TriQuint Semiconductor, Inc. 50 Single-ended Output Page 2 of 5 Part Number 856929 140 MHz SAW Filter Data Sheet Typical Performance (at +25oC) Subject to change or obsolescence without notice Rev A 07/10 TriQuint Semiconductor, Inc. Page 3 of 5 Part Number 856929 140 MHz SAW Filter Data Sheet Matching Schematics Actual matching values may vary due to PCB layout and parasitics 150nH 9 50 Single-ended Input 4 22nH 50 50 Single-ended Output 50 1,2,3,5 6,7,8,10 Marking PCB Footprint 7.20 1.27 TriQuint 856929 JJJYHH Pad 1 ID dot Date code 2.54 5.70 1.60 The date code consists of: day of the current year (Julian, 3 digits), last digit of the year (1 digit) and hour (2 digits) 0.80 1.20 This footprint represents a recommendation only Dimensions shown are nominal in millimeters Tape and Reel 16.8 2.7 ID dot Ø330 4.0 0.3 2.0 Ø1.5 A 1.75 7.5 16.0 7.3 Ø102 Direction of travel Ø20.2 Ø13.0 2.0 2.2 5.8 8.0 Ø1.5 A Section A-A Dimensions shown are nominal in millimeters Packaging quantity: 3000 units/reel Subject to change or obsolescence without notice Rev A 07/10 TriQuint Semiconductor, Inc. Page 4 of 5 Part Number 856929 140 MHz SAW Filter Data Sheet Maximum Ratings Parameter Operating Temperature Range Storage Temperature Range Input Power Symbol Minimum Maximum T Tstg Pin -30 -40 - +80 +85 +10 Unit o C C dBm o Important Notes Warnings Electrostatic Sensitive Device (ESD) Avoid ultrasonic exposure RoHS Compliance This product complies with EU directive 2002/95/EC (RoHS) Pb Solderability Compatible with JEDEC J-STD-020C Pb-free process, 260°C peak reflow temperature (see soldering profile) Links to Additional Technical Information PCB Layout Tips Qualification Flowchart S-Parameters RoHS Information Soldering Profile Other Technical Information TriQuint’s liability is limited only to the Surface Acoustic Wave (SAW) component(s) described in this data sheet. TriQuint does not accept any liability for applications, processes, circuits or assemblies, which are implemented using any TriQuint component described in this data sheet. Contact Information PO Box 609501 Orlando, FL 32860-9501 USA Subject to change or obsolescence without notice Phone: +1 (407) 886-8860 Fax: +1 (407) 886-7061 Email: [email protected] Web: www.triquint.com Rev A Or contact one of our worldwide Network of sales offices, Representatives or distributors 07/10 TriQuint Semiconductor, Inc. Page 5 of 5