REVISIONS PART NO. 8FSM Series ECN # REV DESCRIPTION - A RELEASED DRAWN DATE Ashok 19/01/12 CHECKD DATE APPRVD DATE Jagan 19/01/12 Farnell 02/02/12 Dimensions : Millimetres (Inches) Specifications: Recommended Panel Cut-out Dimensions Current rating Minimum insulation resistance Minimum dielectric withstanding voltage Operating temperature Contact resistance Dielectric material Colour Contact material Contact plating Wire size Important Notice : This data sheet and its contents (the "Information") belong to the members of the Premier Farnell group of companies (the "Group") or are licensed to it. No licence is granted for the use of it other than for information purposes in connection with the products to which it relates. No licence of any intellectual property rights is granted. The Information is subject to change without notice and replaces all data sheets previously supplied. The Information supplied is believed to be accurate but the Group assumes no responsibility for its accuracy or completeness, any error in or omission from it or for any use made of it. Users of this data sheet should check for themselves the Information and the suitability of the products for their purpose and not make any assumptions based on information included or omitted. Liability for loss or damage resulting from any reliance on the Information or use of it (including liability resulting from negligence or where the Group was aware of the possibility of such loss or damage arising) is excluded. This will not operate to limit or restrict the Group's liability for death or personal injury resulting from its negligence. Multicomp is the registered trademark of the Group. © Premier Farnell plc 2012. TOLERANCES: UNLESS OTHERWISE SPECIFIED, DIMENSIONS ARE FOR REFERENCE PURPOSES ONLY. DRAWN BY: Ashok CHECKED BY: DATE: 19/01/12 DATE: Jagan 19/01/12 APPROVED BY: DATE: 02/02/12 : 1 ampere : ≥1,000 MΩ (at 500 V dc) : 500 V ac (for one minute) : -55°C to 105°C : ≤15 mΩ : PBT with glass-fibre reinforced : Black, blue and grey (optional) : Phosphor bronze : Gold over nickel : AWG 26 and 28 stranded, 1.27 mm conductor centre flat cable DRAWING TITLE: Metal D Type IDC Connectors - Unthreaded SIZE A DWG NO. SCALE: NTS M10001972 U.O.M.: mm (Inches) REV ELECTRONIC FILE A 50302_DWG SHEET: 1 OF 2 REVISIONS PART NO. ECN # REV DESCRIPTION - A RELEASED 8FSM Series DRAWN DATE Ashok 19/01/12 CHECKD DATE APPRVD DATE Jagan 19/01/12 Farnell 02/02/12 Specification Table Number of Positions A ±0.13 (±0.005) B ±0.25 (±0.01) C ±0.13 (±0.005) D ±0.13 (±0.005) E ±0.25 (±0.01) F ±0.25 (±0.01) H ±0.25 (±0.01) I ±0.13 (±0.005) I ±0.13 (±0.005) Rear Mounting Front Mounting Part Number 9 24.99 (0.984) 30.8 (1.212) 11.08 (0.436) 8.31 (0.327) 16.1 (0.634) 18.6 (0.732) 16.33 (0.643) 20.47 (0.806) 22.2 (0.874) 8FSM09S-30N4-FEC 15 33.32 (1.312) 39.1 (1.539) 19.39 (0.763) 16.62 (0.654) 24 (0.945) 26.6 (1.047) 24.66 (0.971) 28.8 (1.134) 30.53 (1.202) 8FSM15S-30N4-FEC 54.6 (2.15) 57.1 (2.248) 54.84 (2.159) 59.08 (2.326) 60.73 (2.391) 8FSM37S-30N4-FEC 37 63.5 (2.5) 69.4 (2.732) 49.86 (1.963) 47.09 (1.854) Dimensions : Millimetres (Inches) Part Number Explanation: 8F SM Series Housing Construction Types Series Housing Construction Types Number of Positions Contact Type Colour Codes Contact Finish Strain Relief Metal Shell Finish Customer 09 Number of Positions : : : : : : : : : S Contact Type Colour Codes 4 N 0 3 - Contact Finish Strain Relief Metal Shell Finish 8F = D-SUB IDC Connector SM = Standard Through Holes (With Metal Shell) 09 = 9, 15, and 37 Positions S = Socket (Female) 3 = Black 0 = Selective Gold Flash Over 30 µ Inches Nickel N = Without Strain Relief 4 = Tin Plated Shell (Without Grounding Indents) FEC = Inland Important Notice : This data sheet and its contents (the "Information") belong to the members of the Premier Farnell group of companies (the "Group") or are licensed to it. No licence is granted for the use of it other than for information purposes in connection with the products to which it relates. No licence of any intellectual property rights is granted. The Information is subject to change without notice and replaces all data sheets previously supplied. The Information supplied is believed to be accurate but the Group assumes no responsibility for its accuracy or completeness, any error in or omission from it or for any use made of it. Users of this data sheet should check for themselves the Information and the suitability of the products for their purpose and not make any assumptions based on information included or omitted. Liability for loss or damage resulting from any reliance on the Information or use of it (including liability resulting from negligence or where the Group was aware of the possibility of such loss or damage arising) is excluded. This will not operate to limit or restrict the Group's liability for death or personal injury resulting from its negligence. Multicomp is the registered trademark of the Group. © Premier Farnell plc 2012. TOLERANCES: UNLESS OTHERWISE SPECIFIED, DIMENSIONS ARE FOR REFERENCE PURPOSES ONLY. DRAWN BY: Ashok CHECKED BY: - FEC Customer www.element14.com www.farnell.com www.newark.com DATE: 19/01/12 DATE: Veena 19/01/12 APPROVED BY: DATE: 02/02/12 DRAWING TITLE: Metal D Type IDC Connectors - Unthreaded SIZE A DWG NO. SCALE: NTS M10001972 U.O.M.: mm (Inches) REV ELECTRONIC FILE A 50302_DWG SHEET: 2 OF 2