9104 Series / Hi Voltage SIP Reed Relays Hi Voltage SIP Reed Relays Molded SIP relays are the industry standard when high reliability and consistent performance are desired in a compact package. The 9104 Series adds high voltage switching capability and high voltage standoff capability to a SIP relay package. These high voltage, high performance relays are ideally suited for Automatic Test Equipment, Instrumentation, and Process Control applications where voltage isolation is a key design requirement. Series Features High voltage switching up to 1000 V High dielectric strength (2000 V DC) 11 High Insulation Resistance – 10 Ω minimum High reliability, hermetically sealed contacts for long life High speed switching compared to electromechanical relays Molded thermoset body on integral lead frame design Optional Coil Suppression Diode – protects coil drive circuits Magnetic Shield – reduces interaction UL File # E67117 Model 9104 Dimensions in Inches (Millimeters) 36 COTO TECHNOLOGY (USA) Tel: (401) 943-2686 / Fax (401) 942-0920 6 (Europe) Tel: +31-45-5439343 / Fax +31-45-5427216 9104 Series / Hi Voltage SIP Reed Relays Top View: Dot stamped on relay refers to pin #1 Grid = .1"x.1" (2.54mm x 2.54mm) Notes: 1 Consult factory for life expectancy at other switching loads. 2 Optional diode is connected to pin #3 (+) and pin #5(-). Correct coil polarity must be observed. 3 Consists of 56V Zener diode and 1N4148 diode in series, connected in parallel with coil. 4 Switch current limited to 1.0mA @ 1000V. Environmental Ratings: Storage Temp: -35°C to +100°C; Operating Temp: -20°C to +85°C Solder Temp: 270°C max; 10 sec. max The operate and release voltage and the coil resistance are specified at 25°C. These values vary by approximately 0.4% / °C as the ambient temperature varies. Vibration: 20 G’s to 2000 Hz; Shock: 50 G’s For Most Recent Data, Consult the Coto Technology Website: www.cotorelay.com 6 E-mail: [email protected] 37