EVERLIGHT ELECTRONICS CO.,LTD. Technical Data Sheet 1.9mm Round Subminiature Lead LED 95-21SYGC/S530-XX/XXX Features ․Package in 12mm tape on 7" diameter reels. ․Compatible with automatic placement equipment. ․EIA Std. package. ․Mono-color type. ․Pb-free ․The product itself will remain within RoHS compliant version. Descriptions ․The 95-21 SMD taping is much smaller than leaded components .Thus enable smaller board size. Higher packing density. Reduced storage space and finally smaller equipment to be obtained. ․Besides, light weight makes them ideal for miniature applications. ․Furthermore by automation assembly machines the accuracy is anticipated. Applications ․Small indicator for indoor applications. ․Flat backlight for LCD, switches and symbols. ․Indicator and backlight in office equipment. ․Indicator and backlight for battery driven equipment. ․Indicator and backlight for audio and video equipment. ․Telecommunication：indicator and backlighting in telephone and fax. Device Selection Guide Part No. 95-21SYGC/S530-XX/XX Chip Lens Color Material Emitted Color AlGaInP Brilliant Yellow Green Water Clear Everlight Electronics Co., Ltd. http://www.everlight.com Rev. 2 Page: 1 of 11 Device No. : SZDLE-952-010 Prepared date: 09-Nov-2005 Prepared by:Zhang huali EVERLIGHT ELECTRONICS CO.,LTD. 95-21SYGC/S530-XX/XXX Package Outline Dimensions - + - + - + - + - + 直腳 - + Note: The tolerances unless mentioned is ±0.1mm ,Unit = mm Everlight Electronics Co., Ltd. http://www.everlight.com Rev. 2 Page: 2 of 11 Device No. : SZDLE-952-010 Prepared date: 09-Nov-2005 Prepared by:Zhang huali EVERLIGHT ELECTRONICS CO.,LTD. 95-21SYGC/S530-XX/XXX Absolute Maximum Ratings (Ta=25℃) Parameter Symbol Rating Unit Reverse Voltage VR 5 V Forward Current IF 25 mA Operating Temperature Topr -40 ~ +85 ℃ Storage Temperature Tstg -40 ~ +100 ℃ Electrostatic Discharge(HBM) ESD 2000 V Power Dissipation Pd 60 mW IFP 60 mA Peak Forward Current (Duty 1/10 @ 1KHz) Reflow Soldering : 260 ℃ for 10 sec. Soldering Temperature Tsol Hand Soldering : 350 ℃ for 3 sec. Everlight Electronics Co., Ltd. http://www.everlight.com Rev. 2 Page: 3 of 11 Device No. : SZDLE-952-010 Prepared date: 09-Nov-2005 Prepared by:Zhang huali EVERLIGHT ELECTRONICS CO.,LTD. 95-21SYGC/S530-XX/XXX Electro-Optical Characteristics (Ta=25℃) Parameter Symbol Chip Rank MIN. TYP. MAX. ---- 12 ---- 132 198 ---- Unit Condition IF=2mA E1 Luminous Intensity ---- 20 ---- 264 330 ---- E3 400 630 ---- IV IF=20mA mcd IF=2mA E2 Viewing Angle 2θ1/2 ---- ---- 25 ---- deg Peak Wavelength Dominant Wavelength Spectrum Radiation Bandwidth λp ---- ---- 575 ---- nm λd ---- ---- 573 ---- nm △λ ---- ---- 20 ---- nm Forward Voltage VF ---- 1.7 2.0 2.4 V Reverse Current IR ---- ---- ---- 10 μA IF=20mA VR=5V *95-21SYGC/S530-XX / XXX 1 2 1:Chip Rank 2:Packing Method: (1) None,F1,F2, F7,F9,F10：Bulk (2) TR7,TR9,TR10：Taping Everlight Electronics Co., Ltd. http://www.everlight.com Rev. 2 Page: 4 of 11 Device No. : SZDLE-952-010 Prepared date: 09-Nov-2005 Prepared by:Zhang huali EVERLIGHT ELECTRONICS CO.,LTD. 95-21SYGC/S530-XX/XXX Typical Electro-Optical Characteristics Curves Everlight Electronics Co., Ltd. http://www.everlight.com Rev. 2 Page: 5 of 11 Device No. : SZDLE-952-010 Prepared date: 09-Nov-2005 Prepared by:Zhang huali EVERLIGHT ELECTRONICS CO.,LTD. 95-21SYGC/S530-XX/XXX Label explanation CAT: Luminous Intensity Rank HUE: Dom. Wavelength Rank xxxxxx xxxxxx REF: Forward Voltage Rank RoHS xxxxxxxxxxxx xxxx xxxxxxxx Reel & Carrier Tape Dimensions Note: Tolerances Unless Dimension is ±0.1mm , Unit = mm Everlight Electronics Co., Ltd. http://www.everlight.com Rev. 2 Page: 6 of 11 Device No. : SZDLE-952-010 Prepared date: 09-Nov-2005 Prepared by:Zhang huali EVERLIGHT ELECTRONICS CO.,LTD. 95-21SYGC/S530-XX/XXX Loaded quantity 1000 PCS per reel 1 95-21/TR7 95-21/TR9 Everlight Electronics Co., Ltd. http://www.everlight.com Rev. 2 Page: 7 of 11 Device No. : SZDLE-952-010 Prepared date: 09-Nov-2005 Prepared by:Zhang huali EVERLIGHT ELECTRONICS CO.,LTD. 95-21SURC/S530-XX/XXX Loaded quantity 1000 PCS per reel 95-21/TR10 Note: The tolerances unless mentioned is ±0.1mm ,Unit = mm Moisture Resistant Packaging Label Aluminum moisture-proof bag Desiccant Label Everlight Electronics Co., Ltd. http://www.everlight.com Rev. 2 Page: 8 of 11 Device No. : SZDLE-952-010 Prepared date: 09-Nov-2005 Prepared by:Zhang huali EVERLIGHT ELECTRONICS CO.,LTD. 95-21SYGC/S530-XX/XXX Reliability Test Items And Conditions The reliability of products shall be satisfied with items listed below. Confidence level : 90 % LTPD : 10 % Test Sample No. Items Test Condition Ac/Re Hours/Cycles Size Temp. : 260℃±5℃ 6 Min. 22 Pcs. 0/1 1 Reflow Soldering Min. 5 sec. 2 3 4 5 Temperature Cycle H : +100℃ 15 min. ∫ 5 min. L : -40℃ 15 min. 300 Cycles 22 Pcs. 0/1 Thermal Shock H : +100℃ 5 min. ∫ 10 sec. L : -10℃ 5 min. 300 Cycles 22 Pcs. 0/1 Temp. : 100℃ 1000 Hrs. 22 Pcs. 0/1 Temp. : -40℃ 1000 Hrs. 22 Pcs. 0/1 High Temperature Storage Low Temperature Storage 6 DC Operating Life IF = 20 mE 1000 Hrs. 22 Pcs. 0/1 7 High Temperature / High Humidity 85℃/ 85% RH 1000 Hrs. 22 Pcs. 0/1 Everlight Electronics Co., Ltd. http://www.everlight.com Rev. 2 Page: 9 of 11 Device No. : SZDLE-952-010 Prepared date: 09-Nov-2005 Prepared by:Zhang huali EVERLIGHT ELECTRONICS CO.,LTD. 95-21SYGC/S530-XX/XXX Precautions For Use 1. Over-current-proof Customer must apply resistors for protection , otherwise slight voltage shift will cause big current change ( Burn out will happen ). 2. Storage 2.1 Do not open moisture proof bag before the products are ready to use. 2.2 Before opening the package, the LEDs should be kept at 30℃ or less and 90%RH or less. 2.3After opening the package, the LEDs should be kept at 30℃ or less and 60%RH or less(Floor life). However,it’s recommended that The LEDs should be used within 168 hours (7 days) after opening the package.If unused LED remain, it should be stored in moisture proof packages. 2.4 If the moisture absorbent material (silica gel) has faded away or the LEDs have exceeded the storage time, baking treatment should be performed using the following conditions. Baking treatment : 60±5℃ for 24 hours. 3. Soldering Condition 3.1 Pb-free solder temperature profile 3.2 Reflow soldering should not be done more than two times. 3.3 When soldering, do not put stress on the LEDs during heating. 3.4 After soldering, do not warp the circuit board. 4.Soldering Iron Each terminal is to go to the tip of soldering iron temperature less than 350℃ for 3 seconds within once in less than the soldering iron capacity 25W. Leave two seconds and more intervals, and do soldering of each terminal. Be careful because the damage of the product is often started at the time of the hand solder. Everlight Electronics Co., Ltd. http://www.everlight.com Rev. 2 Page: 10 of 11 Device No. : SZDLE-952-010 Prepared date: 09-Nov-2005 Prepared by:Zhang huali EVERLIGHT ELECTRONICS CO.,LTD. 95-21SYGC/S530-XX/XXX 5.Repairing Repair should not be done after the LEDs have been soldered. When repairing is unavoidable, a double-head soldering iron should be used (as below figure). It should be confirmed beforehand whether the characteristics of the LEDs will or will not be damaged by repairing. EVERLIGHT ELECTRONICS CO., LTD. Office: No 25, Lane 76, Sec 3, Chung Yang Rd, Tucheng, Taipei 236, Taiwan, R.O.C Tel: 886-2-2267-2000, 2267-9936 Fax: 886-2267-6244, 2267-6189, 2267-6306 http://www.everlight.com Everlight Electronics Co., Ltd. http://www.everlight.com Rev. 2 Page: 11 of 11 Device No. : SZDLE-952-010 Prepared date: 09-Nov-2005 Prepared by:Zhang huali