EVERLIGHT ELECTRONICS CO.,LTD. Technical Data Sheet 1.9mm Round Subminiature Lead LED 95-21SYGC/S530-XX/XXX Features ․Package in 12mm tape on 7" diameter reels. ․Compatible with automatic placement equipment. ․EIA Std. package. ․Mono-color type. ․Pb-free ․The product itself will remain within RoHS compliant version. Descriptions ․The 95-21 SMD LED is much smaller than leaded components .Thus enable smaller board size. Higher packing density. Reduced storage space and finally smaller equipment to be obtained. ․Besides, light weight makes them ideal for miniature applications. ․Furthermore by automation assembly machines the accuracy is anticipated. Applications ․Small indicator for indoor applications. ․Flat backlight for LCD, switches and symbols. ․Indicator and backlight in office equipment. ․Indicator and backlight for battery driven equipment. ․Indicator and backlight for audio and video equipment. ․Telecommunication：indicator and backlighting in telephone and fax. Device Selection Guide Part No. 95-21SYGC/S530-XX/XXX Chip Material InGaN Emitted Color Resin Color Brilliant Yellow Green Water Clear Everlight Electronics Co., Ltd. http://www.everlight.com Rev. 2 Page: 1 of 11 Device No. : SZDLE-952-010 Prepared date: 30-Jun-2011 Prepared by:Xie Haitao EVERLIGHT ELECTRONICS CO.,LTD. 95-21SYGC/S530-XX/XXX Package Outline Dimensions - + - + - + - + - + 直腳 - + Note: The tolerances unless mentioned is ±0.1mm ,Unit = mm Everlight Electronics Co., Ltd. http://www.everlight.com Rev. 2 Page: 2 of 11 Device No. : SZDLE-952-010 Prepared date: 30-Jun-2011 Prepared by:Xie Haitao EVERLIGHT ELECTRONICS CO.,LTD. 95-21SYGC/S530-XX/XXX Absolute Maximum Ratings (Ta=25℃) Parameter Symbol Rating Unit Reverse Voltage VR 5 V Forward Current IF 25 mA IFP 60 mA Power Dissipation Pd 60 mW Electrostatic Discharge(HBM) ESD 2000 V Operating Temperature Topr -40 ~ +85 ℃ Storage Temperature Tstg -40 ~ +100 ℃ Soldering Temperature Tsol Peak Forward Current (Duty 1/10 @ 1KHz) Reflow Soldering : 260 ℃ for 10 sec. Hand Soldering : 350 ℃ for 3 sec. Everlight Electronics Co., Ltd. http://www.everlight.com Rev. 2 Page: 3 of 11 Device No. : SZDLE-952-010 Prepared date: 30-Jun-2011 Prepared by:Xie Haitao EVERLIGHT ELECTRONICS CO.,LTD. 95-21SYGC/S530-XX/XXX Electro-Optical Characteristics (Ta=25℃) Parameter Symbol Chip Rank Luminous Intensity IV MIN. TYP. MAX. Unit E1 ---- 12 ---- mcd E2 ---- 20 ---- mcd E1 132 198 ---- mcd E2 264 330 ---- mcd E3 400 630 ---- mcd Viewing Angle 2θ1/2 ---- ---- 25 ---- deg Peak Wavelength Dominant Wavelength Spectrum Radiation Bandwidth λp ---- ---- 575 ---- nm λd ---- ---- 573 ---- nm △λ ---- ---- 20 ---- nm Forward Voltage VF ---- 1.7 2.0 2.4 V Reverse Current IR ---- ---- ---- 10 μA Condition IF=2mA IF=20mA VR=5V *95-21SYGC/S530-XX / XXX 1 2 1:Chip Rank 2:Packing Method: (1) None,F1,F2, F7,F9,F10：Bulk (2) TR7,TR9,TR10：Taping Everlight Electronics Co., Ltd. http://www.everlight.com Rev. 2 Page: 4 of 11 Device No. : SZDLE-952-010 Prepared date: 30-Jun-2011 Prepared by:Xie Haitao EVERLIGHT ELECTRONICS CO.,LTD. 95-21SYGC/S530-XX/XXX Typical Electro-Optical Characteristics Curves Everlight Electronics Co., Ltd. http://www.everlight.com Rev. 2 Page: 5 of 11 Device No. : SZDLE-952-010 Prepared date: 30-Jun-2011 Prepared by:Xie Haitao EVERLIGHT ELECTRONICS CO.,LTD. 95-21SYGC/S530-XX/XXX Label explanation EVERLIGHT CAT: Luminous Intensity Rank Pb HUE: Dom. Wavelength Rank CPN : P N : XXXXXXXXXXXXX RoHS REF: Forward Voltage Rank XXXXXXXXXXXXX CAT : XXX HUE : XXX REF : XXX QTY : XXX LOT NO : XXXXXXXXXX Reference : XXXXXXXX MADE IN TAIWAN Reel & Carrier Tape Dimensions Note: Tolerances Unless Dimension is ±0.1mm , Unit = mm Everlight Electronics Co., Ltd. http://www.everlight.com Rev. 2 Page: 6 of 11 Device No. : SZDLE-952-010 Prepared date: 30-Jun-2011 Prepared by:Xie Haitao EVERLIGHT ELECTRONICS CO.,LTD. 95-21SYGC/S530-XX/XXX Loaded quantity 1000 PCS per reel 95-21/TR7 95-21/TR9 Everlight Electronics Co., Ltd. http://www.everlight.com Rev. 2 Page: 7 of 11 Device No. : SZDLE-952-010 Prepared date: 30-Jun-2011 Prepared by:Xie Haitao EVERLIGHT ELECTRONICS CO.,LTD. 95-21SURC/S530-XX/XXX Loaded quantity 1000 PCS per reel 95-21/TR10 Note: The tolerances unless mentioned is ±0.1mm ,Unit = mm Moisture Resistant Packaging Label Aluminum moisture-proof bag Desiccant Label Everlight Electronics Co., Ltd. http://www.everlight.com Rev. 2 Page: 8 of 11 Device No. : SZDLE-952-010 Prepared date: 30-Jun-2011 Prepared by:Xie Haitao EVERLIGHT ELECTRONICS CO.,LTD. 95-21SYGC/S530-XX/XXX Reliability Test Items And Conditions The reliability of products shall be satisfied with items listed below. Confidence level : 90 % LTPD : 10 % Test Sample No. Items Test Condition Ac/Re Hours/Cycles Size Temp. : 260℃±5℃ 6 Min. 1 Reflow Soldering 22 Pcs. 0/1 Min. 5 sec. 2 3 4 5 Temperature Cycle H : +100℃ 15 min. ∫ 5 min. L : -40℃ 15 min. 300 Cycles 22 Pcs. 0/1 Thermal Shock H : +100℃ 5 min. ∫ 10 sec. L : -10℃ 5 min. 300 Cycles 22 Pcs. 0/1 Temp. : 100℃ 1000 Hrs. 22 Pcs. 0/1 Temp. : -40℃ 1000 Hrs. 22 Pcs. 0/1 High Temperature Storage Low Temperature Storage 6 DC Operating Life IF = 20 mE 1000 Hrs. 22 Pcs. 0/1 7 High Temperature / High Humidity 85℃/ 85% RH 1000 Hrs. 22 Pcs. 0/1 Everlight Electronics Co., Ltd. http://www.everlight.com Rev. 2 Page: 9 of 11 Device No. : SZDLE-952-010 Prepared date: 30-Jun-2011 Prepared by:Xie Haitao EVERLIGHT ELECTRONICS CO.,LTD. 95-21SYGC/S530-XX/XXX Precautions For Use 1. Over-current-proof Customer must apply resistors for protection , otherwise slight voltage shift will cause big current change ( Burn out will happen ). 2. Storage 2.1 Do not open moisture proof bag before the products are ready to use. 2.2 Before opening the package: The LEDs should be kept at 30℃ or less and 90%RH or less. 2.3 After opening the package: The LED's floor life is 1 year under 30℃ or less and 60% RH or less. If unused LEDs remain, it should be stored in moisture proof packages. 2.4 If the moisture absorbent material (silica gel) has faded away or the LEDs have exceeded the storage time, baking treatment should be performed using the following conditions. 3. Soldering Condition 3.1 Pb-free solder temperature profile 3.2 Reflow soldering should not be done more than two times. 3.3 When soldering, do not put stress on the LEDs during heating. 3.4 After soldering, do not warp the circuit board. Everlight Electronics Co., Ltd. http://www.everlight.com Rev. 2 Page: 10 of 11 Device No. : SZDLE-952-010 Prepared date: 30-Jun-2011 Prepared by:Xie Haitao EVERLIGHT ELECTRONICS CO.,LTD. 95-21SYGC/S530-XX/XXX 4.Soldering Iron Each terminal is to go to the tip of soldering iron temperature less than 350℃ for 3 seconds within once in less than the soldering iron capacity 25W. Leave two seconds and more intervals, and do soldering of each terminal. Be careful because the damage of the product is often started at the time of the hand solder. 5.Repairing Repair should not be done after the LEDs have been soldered. When repairing is unavoidable, a double-head soldering iron should be used (as below figure). It should be confirmed beforehand whether the characteristics of the LEDs will or will not be damaged by repairing. EVERLIGHT ELECTRONICS CO., LTD. Office: No 25, Lane 76, Sec 3, Chung Yang Rd, Tucheng, Taipei 236, Taiwan, R.O.C Tel: 886-2-2267-2000, 2267-9936 Fax: 886-2267-6244, 2267-6189, 2267-6306 http://www.everlight.com Everlight Electronics Co., Ltd. http://www.everlight.com Rev. 2 Page: 11 of 11 Device No. : SZDLE-952-010 Prepared date: 30-Jun-2011 Prepared by:Xie Haitao