A-XMD-1W Series 1KV ISOLATED 1W UNREGULATED DUAL OUTPUT DIP8 DC DC⁄⁄DC Converter SELECTION GUIDE Model INPUT VOLTAGE (V) OUTPUT VOLTAGE (V) OUTPUT CURRENT MAX (mA) A0503XMD-1W 4.5-5.5 ±3.3 A0505XMD-1W 4.5-5.5 ±5 A0507XMD-1W 4.5-5.5 A0509XMD-1W ISOIATION (VDC) MAX CAPACTIVE Load EFFICIEN CY (% ) ±150 1000 ±100 63 ±100 1000 ±100 72 ±7.2 ±70 1000 ±100 75 4.5-5.5 ±9 ±55 1000 ±100 78 A0512XMD-1W 4.5-5.5 ±12 ±42 1000 ±100 80 ◆Output ±3.3, 5, 7.2, 12, 15 and 18VDC A1515XMD-1W 4.5-5.5 ±15 ±34 1000 ±100 80 A0518XMD-1W 4.5-5.5 ±18 ±28 1000 ±100 78 ◆Typical at +25°C, nominal input voltage, A0524XMD-1W 4.5-5.5 ±24 ±21 1000 ±100 78 A1203XMD-1W 10.8-13.2 ±3.3 ±150 1000 ±100 70 A1205XMD-1W 10.8-13.2 ±5 ±100 1000 ±100 72 A1207XMD-1W 10.8-13.2 ±7.2 ±70 1000 ±100 71 A1209XMD-1W 10.8-13.2 ±9 ±55 1000 ±100 76 A1212XMD-1W 10.8-13.2 ±12 ±42 1000 ±100 80 A1215XMD-1W 10.8-13.2 ±15 ±34 1000 ±100 80 A1218XMD-1W 10.8-13.2 ±18 ±28 1000 ±100 76 A1224XMD-1W 10.8-13.2 ±24 ±21 1000 ±100 78 A2403XMD-1W 21.6-26.4 ±3.3 ±150 1000 ±100 76 A2405XMD-1W 21.6-26.4 ±5 ±100 1000 ±100 72 A2407XMD-1W 21.6-26.4 ±7.2 ±70 1000 ±100 73 A2409XMD-1W 21.6-26.4 ±9 ±55 1000 ±100 77 A2412XMD-1W 21.6-26.4 ±12 ±42 1000 ±100 82 A2415XMD-1W 21.6-26.4 ±15 ±34 1000 ±100 82 A2418XMD-1W 21.6-26.4 ±18 ±28 1000 ±100 75 A2424XMD-1W 21.6-26.4 ±24 ±21 1000 ±100 80 FEATURES ◆Input 5, 12 and 24 VDC rated output current unless otherwise specified ◆DIP8 package ◆Operating Temperature: -40℃～﹢85℃ ◆1000VDC Isolation ◆Short circuit protection(automatic recovery) ◆No external component required ◆MTBF>1,000,000 hours ◆RoHS Compliance MODEL SELECTION A①05②05③X④ MD⑤-1W(100)⑥ ①Product Series ②Input Voltage ③Output Voltage ④Fixed Input ⑤MINI DIP8 Package ⑥Rated Power(Output current) Input Specifications Voltage range Filter Isolation Specifications Rated voltage 1000 VDC Leakage current Resistance APPLICATIONS ±10 % Capacitors Capacitance 1 mA 109Ohm 60 pF typ. Output Specifications The A-XMD-1W series are specially designed for Voltage accuracy ±5 %, max. applications where a group of polar power supplies are Ripple and noise (at 20 MHz BW) isolated from the input power supply in a distributed power Short circuit protection supply system on a circuit board. Line voltage regulation These products apply to: Load voltage regulation ±8 %, load = 20 ~ 100 % 1) where the voltage of the input power supply is fixed Temperature coefficient ±0,02 % / °C (voltage variation ≤±10%); General Specifications 2) where isolation is necessary between input and output Efficiency 75 % to 85 % (isolation voltage ≤1000VDC); Switching frequency 80 KHz, typ. 3) where the regulation of the output voltage and the Environmental Specifications output ripple noise are not demanded. Operating temperature (ambient) Storage temperature Momentary ±1,2 % / 1,0 % of Vin - 40° C to + 85° C - 55 °C to + 125 °C Derating See graph Humidity Up to 90 %, non condensing Cooling MICRODC reserves the copyright 100 mV p-p, max. Free air convection Physical Characteristics Dimensions DIP8 12,7 X 10,16 x 6,85 mm 0,5 x 0,4 x 0,24 inches Weight Case material http://www.microdc.cn . Technical Enquiries-Email:[email protected] Tel:0086-20-86000646 1,8 g Non conductive black plastic Page 1 of 2 A-XMD-1W Series TUBE OUTLINE DIMENSIONS Dimensions Note: Unit :mm[inch] Unit:mm[inch] General tolerances: ±0.50mm[±0.020inch] Pin section tolerances:±0.10mm[±0.004inch] L=530mm[20.866inch]Devices per tube: 40pcs General tolerances:±0.25mm[±0.010inch] L=220mm[8.661inch] Devices per tube: 16pcs RECOMMENDED FOOTPRINT MECHANICAL DIMENSIONS PIN CONNECTIONS Note: grid 2.54*2.54mm PIN DUAL 1 4 5 6 7 8 -Vin +Vin +Vout Omitted Common -Vout RoHS COMPLIANT INFORMATION This series is compatible with RoHS soldering systems with a peak wave solder temperature of 300°C for 10 seconds. The pin termination finish on the SIP package type is Tin Plate, Hot Dipped over Matte Tin with Nickel Preplate. The DIP types are Matte Tin over Nickel Preplate. Both types in this series are backward compatible with Sn/Pb soldering systems. Microdc Professional Power Module,Inc. Tel:0086-20-86000646 REACH COMPLIANT INFORMATION E-mail:[email protected] Website:http://www.microdc.cn http://www.microdc.cn This series has proven that this product does not contain harmful chemicals, it also has harmful chemical substances through the registration, inspection and approval. Technical Enquiries-Email:[email protected] Tel:0086-20-86000646 Page 2 of 2