defining a degree of excellence HIGH-SPEED 4 PIN SIP PASSIVE DELAY MODULES Cat 16-R5 .20 Max .80 Max .020 .255 Max .120 Min .018 In 2 Out 7 Gnd 1 Gnd 8 .012 .008 .10 Typ .70 + .01 bel (DC) (P/N) .125 Part Numbers 100 Ohms + 10% 0401-1403-02 0401-1403-03 0401-1403-05 0401-1403-07 0401-1403-09 0401-1403-11 0401-1403-13 0401-1403-15 0401-1403-17 0401-1403-19 0401-1403-21 0401-1403-23 0401-1403-25 0401-1403-27 0401-1403-29 0401-1403-31 0401-1403-33 0401-1403-35 0401-1403-37 0401-1403-39 0401-1403-40 0401-1403-46 0401-1403-51 0401-1403-56 0401-1403-61 50 Ohms +10% 75 Ohms + 10% 65 Ohms + 10% A401-1500-02 A401-1500-03 A401-1500-05 A401-1500-07 A401-1500-09 A401-1500-11 A401-1500-13 A401-1500-15 A401-1500-17 A401-1500-19 A401-1500-21 A401-1500-23 A401-1500-25 A401-1500-27 A401-1500-29 A401-1500-31 A401-1500-33 A401-1500-35 A401-1500-37 A401-1500-39 A401-1500-40 A401-1500-46 A401-1500-51 A401-1500-56 A401-1500-61 A401-1501-02 A401-1501-03 A401-1501-05 A401-1501-07 A401-1501-09 A401-1501-11 A401-1501-13 A401-1501-15 A401-1501-17 A401-1501-19 A401-1501-21 A401-1501-23 A401-1501-25 A401-1501-27 A401-1501-29 A401-1501-31 A401-1501-33 A401-1501-35 A401-1501-37 A401-1501-39 A401-1501-40 A401-1501-46 A401-1501-51 A401-1501-56 A401-1501-61 80 Ohms + 10% A401-1503-02 A401-1503-03 A401-1503-05 A401-1503-07 A401-1503-09 A401-1503-11 A401-1503-13 A401-1503-15 A401-1503-17 A401-1503-19 A401-1503-21 A401-1503-23 A401-1503-25 A401-1503-27 A401-1503-29 A401-1503-31 A401-1503-33 A401-1503-35 A401-1503-37 A401-1503-39 A401-1503-40 A401-1503-46 A401-1503-51 A401-1503-56 A401-1503-61 A401-1505-02 A401-1505-03 A401-1505-05 A401-1505-07 A401-1505-09 A401-1505-11 A401-1505-13 A401-1505-15 A401-1505-17 A401-1505-19 A401-1505-21 A401-1505-23 A401-1505-25 A401-1505-27 A401-1505-29 A401-1505-31 A401-1505-33 A401-1505-35 A401-1505-37 A401-1505-39 A401-1505-40 A401-1505-46 A401-1505-51 A401-1505-56 A401-1505-61 Electrical Characteristics Delay Measurement Rise Time Measurement Distortion Insulation Resistance @ 50 Vdc Dielectric Withstanding Voltage Operating Temperature Range Temperature Coefficient of Delay Minimum Input Pulse Width Maximum Duty Cycle Other Delays and Impedances Available Contact Sales 30 0.5 + 1.0 + 2.0 + 3.0 + 4.0 + 5.0 + 6.0 + 7.0 + 8.0 + 9.0 + 10.0 + 11.0 + 12.0 + 13.0 + 14.0 + 15.0 + 16.0 + 17.0 + 18.0 + 19.0 + 20.0 + 25.0 + 30.0 + 35.0 + 40.0 + 0.25 0.25 0.25 0.25 0.25 0.25 0.25 .025 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.50 0.50 0.50 0.50 0.50 ns ns ns ns ns ns ns ns ns ns ns ns ns ns ns ns ns ns ns ns ns ns ns ns ns Rise Time (True) 1.0 ns 1.0 ns 1.0 ns 1.0 ns 1.0 ns 1.1 ns 1.3 ns 1.5 ns 1.7 ns 1.9 ns 2.0 ns 2.2 ns 2.3 ns 2.5 ns 2.6 ns 2.8 ns 3.0 ns 3.2 ns 3.4 ns 3.6 ns 3.8 ns 4.5 ns 5.5 ns 6.4 ns 7.4 ns DCR Maximum 1.0 Ohm 1.0 Ohm 1.0 Ohm 1.0 Ohm 1.0 Ohm 1.0 Ohm 1.0 Ohm 1.0 Ohm 1.0 Ohm 1.0 Ohm 1.0 Ohm 2.0 Ohms 2.0 Ohms 2.0 Ohms 2.0 Ohms 2.0 Ohms 2.5 Ohms 2.5 Ohms 2.5 Ohms 2.5 Ohms 2.5 Ohms 4.0 Ohms 4.5 Ohms 5.5 Ohms 6.0 Ohms Test Conditions @ 25oC 50% Levels 10%-90% Levels + 10% 10K Megohms Min. 50 Vdc -55oC to +125oC 100 PPM/oC Max. 3 x Trout or 5 ns W.I.G. 60% Corporate Office Bel Fuse Inc. 198 Van Vorst Street, Jersey City, NJ 07302-4496 Tel: 201-432-0463 Fax: 201-432-9542 E-Mail: [email protected] Internet: http://www.belfuse.com Total Delay Ein Trin PW PP Pulse Voltage Rise Time Pulse Width Pulse Period 1 Volt Typical 2.0 ns (10%-90%) 3 x Total Delay 4 x Pulse Width Notes Transfer molded for better reliability Compatible with ECL & TTL circuits Terminals: Electro-Tin plate phosphor bronze Performance warranty is limited to specified parameters listed Far East Office Bel Fuse Ltd. 8F/8 Luk Hop Street San Po Kong Kowloon, Hong Kong Tel: 852-2328-5515 Fax: 852-2352-3706 Specifications subject to change without notice. European Office Bel Fuse Europe Ltd. Preston Technology Management Centre Marsh Lane, Preston PR1 8UD Lancashire, U.K. Tel: 44-1772-556601 Fax: 44-1772-888366