A62S6308 Series 64K X 8 BIT LOW VOLTAGE CMOS SRAM Document Title 64K X 8 BIT LOW VOLTAGE CMOS SRAM Revision History Rev. No. History Issue Date Remark 1.0 Initial issue September 01, 1997 Preliminary 1.1 Modify TSOP (TSSOP) pin configuration. January 16, 1998 Modify SOP 32L, TSOP 32L and TSSOP 32L type packages outline dimensions. 1.2 Change TSSOP 32L type package to sTSOP 32L. June 16, 1998 Modify sTSOP 32L type package LE symbol dimensions. 1.3 Modify 32-pin TSOP package L symbol dimensions. June 22, 1998 2.0 Finalize October 9, 1998 Final Add 36-ball Mini BGA (6X8) package (October, 1998, Version 2.0) AMIC Technology, Inc. A62S6308 Series 64K X 8 BIT LOW VOLTAGE CMOS SRAM Features n Power supply range: 2.7V to 3.6V n Access times:70/100 ns (max.) n Current: A62S6308-S series: Operating: 40mA (max.) Standby: 15µA (max.) A62S6308-SI series: *Operating: 40mA (max.) *Standby: 30µA (max.) n Extended operating temperature range:-25°C to 85°C n Full static operation, no clock or refreshing required n All inputs and outputs are directly TTL-compatible n Common I/O using three-state output n Output enable and two chip enable inputs for easy application n Data retention voltage: 2V (min.) n Available in 32-pin SOP, TSOP, sTSOP (8 X 13.4mm) forward type and 36-ball Mini BGA (6X8) packages General Description Two chip enable inputs are provided for POWER-DOWN and a device enable and an output enable input are included for easy interfacing. Data retention is guaranteed at a power supply voltage as low as 2V. The A62S6308 is a low operating current 524,288-bit static random access memory organized as 65,536 words by 8 bits and operates on a low power supply voltage from 2.7V to 3.6V. Inputs and three-state outputs are TTL compatible and allow for direct interfacing with common system bus structures. Pin Configurations NC 1 32 VCC NC 2 31 A15 3 30 A12 4 29 WE A7 5 28 A13 27 A8 26 A9 25 A11 24 OE 23 A10 22 CE1 A6 6 A5 7 A4 8 A3 9 A2 10 A1 11 A62S6308M A14 CE2 A0 12 21 I/O7 I/O0 13 20 I/O6 I/O1 14 19 I/O5 I/O2 15 18 I/O4 GND 16 17 I/O3 (October, 1998, Version 2.0) A11 A9 A8 A13 WE CE2 A15 VCC NC NC A14 A12 A7 A6 A5 A4 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 n Mini BGA (6X8) Top View ~ n TSOP/(sTSOP) (forward type) 32 31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 A62S6308V (A62S6308X) ~ ~ n SOP 1 OE A10 CE1 I/O7 I/O6 I/O5 I/O4 I/O3 GND I/O2 I/O1 I/O0 A0 A1 A2 A3 1 2 3 4 5 6 A A0 A1 CE2 A3 A6 A8 B I/O4 A2 WE A4 A7 I/O0 C I/O5 NC A5 I/O1 D VSS VCC E VCC VSS F I/O6 G I/O7 H A9 NC NC I/O2 OE CE1 NC A15 I/O3 A10 A11 A12 A13 A14 AMIC Technology, Inc. A62S6308 Series Block Diagram A0 VCC GND A13 ROW 512 X 1024 DECODER MEMORY ARRAY INPUT DATA CIRCUIT COLUMN I/O A14 A15 I/O1 I/O8 CE2 CE1 CONTROL CIRCUIT OE WE Pin Descriptions - SOP Pin No. Symbol 1,2 NC 3 - 12, 23, 25 - 28, 31 Pin Description - TSOP/sTSOP Pin No. Symbol No Connection 1 - 4, 7, 11 - 20, 31 A0 - A15 A0 - A15 Address Inputs 5 WE Write Enable 13 - 15, 17 - 21 I/O1 - I/O8 Data Inputs/Outputs 6 CE2 Chip Enable 16 GND Ground 8 VCC Power Supply 22 Chip Enable 9, 10 NC No Connection CE1 24 OE Output Enable 21 - 23, 25 - 29 I/O1 - I/O8 29 WE Write Enable 24 GND Ground 30 CE2 Chip Enable 30 CE1 Chip Enable 32 VCC Power Supply 32 OE Output Enable (October, 1998, Version 2.0) Description 2 Description Address Inputs Data Inputs/Outputs AMIC Technology, Inc. A62S6308 Series Recommended DC Operating Conditions (TA = 0°C to + 70°C, -25°C to 85°C) Symbol Parameter VCC Supply Voltage GND Ground Min. Typ. Max. Unit 2.7 3.0 3.6 V 0 0 0 V VIH Input High Voltage 2.0 - VCC + 0.3 V VIL Input Low Voltage -0.3 - +0.6 V CL Output Load - - 30 pF TTL Output Load - - 1 - Absolute Maximum Ratings* *Comments VCC to GND . . . . . . . . . . . . . . . . . . . . . -0.5V to + 4.6V IN, IN/OUT Volt to GND . . . . . . . . . -0.5V to VCC + 0.5V Operating Temperature, Topr . . . . . . . . -25°C to + 85°C Storage Temperature, Tstg . .. . . . . . . . -55°C to + 125°C Power Dissipation, PT . . . . . . . . . . . . . . . . . . . . . . 0.7W Soldering Temp. & Time . . . . . . . . . . . . . 260°C, 10 sec Stresses above those listed under "Absolute Maximum Ratings" may cause permanent damage to this device. These are stress ratings only. Functional operation of this device at these or any other conditions above those indicated in the operational sections of this specification is not implied or intended. Exposure to the absolute maximum rating conditions for extended periods may affect device reliability. DC Electrical Characteristics Symbol Parameter (TA = 0°C to + 70°C or -25°C to 85°C, VCC = 2.7V to 3.6V, GND = 0V) A62S6308-70S/10S A62S6308-70SI/10SI Min. Max. Min. Max. Unit Conditions ILI Input Leakage Current - 1 - 1 µA VIN = GND to VCC ILO Output Leakage Current - 1 - 1 µA CE1 = VIH or CE2 = VIL or OE = VIH or WE = VIL VI/O = GND to VCC ICC Active Power Supply Current - 3 - 3 mA CE1 = VIL, CE2 = VIH II/O = 0mA - 40 - 40 mA Min. Cycle, Duty = 100% CE1 = VIL, CE2 = VIH II/O = 0mA - 5 - 5 mA CE1 = VIL, CE2 = VIH VIH = VCC, VIL = 0V f = 1MHZ, II/O = 0mA ICC1 Dynamic Operating Current ICC2 (October, 1998, Version 2.0) 3 AMIC Technology, Inc. A62S6308 Series DC Electrical Characteristics (continued) Symbol A62S6308-70S/10S Parameter ISB Standby Power Supply Current ISB1 ISB2 A62S6308-70SI/10SI Min. Max. Min. Max. - 0.5 - 0.5 - 15 - - 15 Unit Conditions mA CE1 = VIH or CE2 = VIL 30 µA CE1 ≥ VCC - 0.2V CE2 ≥ VCC - 0.2V VIN ≥ 0V - 30 µA CE2 ≤ 0.2V VIN ≥ 0V VOL Output Low Voltage - 0.4 - 0.4 V IOL = 2.1mA VOH Output High Voltage 2.4 - 2.4 - V IOH = -1.0mA Truth Table Mode CE1 CE2 OE WE I/O Operation H X X X High Z ISB, ISB1 X L X X High Z ISB, ISB2 Output Disable L H H H High Z ICC, ICC1, ICC2 Read L H L H DOUT ICC, ICC1, ICC2 Write L H X L DIN ICC, ICC1, ICC2 Standby Supply Current Note: X = H or L Capacitance (TA = 25°C, f = 1.0MHz) Symbol Parameter Min. Max. Unit Conditions CIN* Input Capacitance 6 pF VIN = 0V CI/O* Input/Output Capacitance 8 pF VI/O = 0V * These parameters are sampled and not 100% tested. (October, 1998, Version 2.0) 4 AMIC Technology, Inc. A62S6308 Series AC Characteristics (TA = 0°C to + 70°C or -25°C to 85°C, VCC = 2.7V to 3.6V) Symbol A62S6308-70S/SI A62S6308-10S/SI Min. Max. Min. Max. 70 - 100 - ns - 70 - 100 ns CE1 - 70 - 100 ns CE2 - 70 - 100 ns - 35 - 50 ns CE1 10 - 10 - ns CE2 10 - 10 - ns 5 - 5 - ns CE1 0 25 0 35 ns CE2 0 25 0 35 ns Parameter Unit Read Cycle tRC Read Cycle Time tAA Address Access Time tACE1 Chip Enable Access Time tACE2 tOE Output Enable to Output Valid tCLZ1 Chip Enable to Output in Low Z tCLZ2 tOLZ Output Enable to Output in Low Z tCHZ1 Chip Disable to Output in High Z tCHZ2 tOHZ Output Disable to Output in High Z 0 25 0 35 ns tOH Output Hold from Address Change 10 - 10 - ns tWC Write Cycle Time 70 - 100 - ns tCW Chip Enable to End of Write 60 - 80 - ns tAS Address Setup Time 0 - 0 - ns tAW Address Valid to End of Write 60 - 80 - ns tWP Write Pulse Width 50 - 60 - ns tWR Write Recovery Time 0 - 0 - ns tWHZ Write to Output in High Z 0 25 0 35 ns tDW Data to Write Time Overlap 30 - 40 - ns tDH Data Hold from Write Time 0 - 0 - ns tOW Output Active from End of Write 5 - 5 - ns Read Cycle Notes: tCHZ1, tCHZ2, tOHZ and tWHZ are defined as the time at which the outputs achieve the open circuit condition and are not referred to output voltage levels. (October, 1998, Version 2.0) 5 AMIC Technology, Inc. A62S6308 Series Timing Waveforms (1, 2, 4) Read Cycle 1 tRC Address tAA tOH tOH DOUT Read Cycle 2 (1, 3, 4, 6) CE1 tACE1 tCLZ15 tCHZ15 DOUT Read Cycle 3 (1, 4, 7 ,8) CE2 tACE2 tCHZ25 tCLZ25 DOUT (October, 1998, Version 2.0) 6 AMIC Technology, Inc. A62S6308 Series Timing Waveforms (continued) Read Cycle 4 (1) tRC Address tAA OE tOE tOH tOLZ5 CE1 tACE1 tCHZ15 tCLZ15 CE2 tACE2 tOHZ 5 tCHZ25 tCLZ25 DOUT Notes: 1. 2. 3. 4. 5. 6. 7. 8. WE is high for Read Cycle. Device is continuously enabled CE1 = VIL and CE2 = VIH. Address valid prior to or coincident with CE1 transition low. OE = VIL. Transition is measured ±500mV from steady state. This parameter is sampled and not 100% tested. CE2 is high. CE1 is low. Address valid prior to or coincident with CE2 transition high. (October, 1998, Version 2.0) 7 AMIC Technology, Inc. A62S6308 Series Timing Waveforms (continued) (6) Write Cycle 1 (Write Enable Controlled) tWC Address tAW tWR3 tCW CE1 (4) CE2 (4) 5 tAS1 tWP2 WE tDW tDH DIN tWHZ tOW DOUT (October, 1998, Version 2.0) 8 AMIC Technology, Inc. A62S6308 Series Timing Waveforms (continued) Write Cycle 2 (Chip Enable Controlled) tWC Address tWR3 tAW tCW5 CE1 CE2 tAS1 (4) (4) tCW5 tWP2 WE tDW tDH DIN tWHZ7 DOUT Notes: 1. 2. 3. 4. tAS is measured from the address valid to the beginning of Write. A Write occurs during the overlap (tWP) of a low CE1, a high CE2 and a low WE . tWR is measured from the earliest of CE1 or WE going high or CE2 going low to the end of the Write cycle. If the CE1 low transition or the CE2 high transition occurs simultaneously with the WE low transition or after the WE transition, outputs remain in a high impedance state. 5. tCW is measured from the later of CE1 going low or CE2 going high to the end of Write. 6. OE is continuously low. ( OE = VIL) 7. Transition is measured ±500mV from steady state. This parameter is sampled and not 100% tested. (October, 1998, Version 2.0) 9 AMIC Technology, Inc. A62S6308 Series AC Test Conditions Input Pulse Levels 0.4V to 2.4V Input Rise and Fall Time 5 ns Input and Output Timing Reference Levels 1.5V Output Load See Figures 1 and 2 TTL TTL CL CL 30pF 5pF * Including scope and jig. * Including scope and jig. Figure 1. Output Load Data Retention Characteristics Symbol Figure 2. Output Load for tCLZ1, tCLZ2, tOHZ, tOLZ, tCHZ1, tCHZ2, tWHZ, and tOW (TA = 0°C to + 70°C or -25°C to 85°C) Parameter VDR1 Min. Max. Unit 2.0 3.6 V CE1 ≥ VCC - 0.2V 2.0 3.6 V CE2 ≤ 0.2V CE1 ≥ VCC - 0.2V or CE1 ≤ 0.2V - 10* VCC for Data Retention VDR2 S-Version µA ICCDR1 SI-Version - 20** S-Version - 10* Data Retention Current µA ICCDR2 SI-Version tCDR Chip Disable to Data Retention Time tR Operation Recovery Time tVR VCC Rise Time from Data Retention Voltage to Operating Voltage ** A62S6308-70S/10S * A62S6308-70SI/10SI (October, 1998, Version 2.0) Conditions VCC = 2.0V CE1 ≥ VCC - 0.2V CE2 ≥ VCC - 0.2V VIN ≥ 0V VCC = 2.0V CE2 ≤ 0.2V VIN ≥ 0V - 20** 0 - ns tRC - ns 5 - ms See Retention Waveform ICCDR: Max. 3µA at TA = 0°C + 40°C ICCDR: Max. 3µA at TA = 0°C + 40°C 10 AMIC Technology, Inc. A62S6308 Series Low VCC Data Retention Waveform (1) ( CE1 Controlled) DATA RETENTION MODE VCC 2.7V tCDR 2.7V tR VDR ≥ 2V tVR CE1 VIH VIH CE1 ≥ VDR - 0.2V Low VCC Data Retention Waveform (2) (CE2 Controlled) DATA RETENTION MODE VCC 2.7V tCDR 2.7V tR VDR ≥ 2V tVR CE2 VIL VIL CE2 < 0.2V (October, 1998, Version 2.0) 11 AMIC Technology, Inc. A62S6308 Series Ordering Information Operating Current Max. (mA) Standby Current Max. (µ µA) A62S6308M-70S 40 15 32L SOP A62S6308M-70SI 40 30 32L SOP A62S6308V-70S 40 15 32L TSOP 40 30 32L TSOP A62S6308X-70S 40 15 32L sTSOP A62S6308X-70SI 40 30 32L sTSOP A62S6308G-70S 40 15 36B Mini BGA A62S6308G-70SI 40 30 36B Mini BGA A62S6308M-10S 40 15 32L SOP A62S6308M-10SI 40 30 32L SOP A62S6308V-10S 40 15 32L TSOP 40 30 32L TSOP A62S6308X-10S 40 15 32L sTSOP A62S6308X-10SI 40 30 32L sTSOP A62S6308G-10S 40 15 36B Mini BGA A62S6308G-10SI 40 30 36B Mini BGA Part No. A62S6308V-70SI A62S6308V-10SI (October, 1998, Version 2.0) Access Time (ns) 70 100 12 Package AMIC Technology, Inc. A62S6308 Series Package Information SOP (W.B.) 32L Outline Dimensions HE 17 E 32 unit: inches/mm θ L 1 b 16 Detail F D Seating Plane LE A1 e S A A2 c D y See Detail F Dimensions in inches Symbol Min Nom Max Dimensions in mm Min Nom Max 3.00 A - - 0.118 - - A1 0.004 - - 0.10 - - A2 0.101 0.106 0.111 2.57 2.69 2.82 b 0.014 0.016 0.020 0.36 0.41 0.51 c 0.006 0.008 0.012 0.15 0.20 0.31 D - 0.805 0.817 - 20.45 20.75 E 0.440 0.445 0.450 11.18 11.30 11.43 e 0.044 0.050 0.056 1.12 1.27 1.42 HE 0.546 0.556 0.566 13.87 14.12 14.38 L 0.023 0.031 0.039 0.58 0.79 0.99 LE 0.047 0.055 0.063 1.19 1.40 1.60 S - - 0.036 - - 0.91 y - - 0.004 - - 0.10 θ 0° - 10° 0° - 10° Notes: 1. The maximum value of dimension D includes end flash. 2. Dimension E does not include resin fins. 3. Dimension S includes end flash. (October, 1998, Version 2.0) 13 AMIC Technology, Inc. A62S6308 Series Package Information TSOP 32L TYPE I (8 X 20mm) Outline Dimensions unit: inches/mm A A1 c E A2 e D θ L LE HD Detail "A" D Detail "A" y S Dimensions in inches Symbol b Dimensions in mm Min Nom Max Min Nom Max A - - 0.047 - - 1.20 A1 0.002 - 0.006 0.05 - 0.15 A2 0.037 0.039 0.041 0.95 1.00 1.05 b 0.007 0.009 0.011 0.18 0.22 0.27 c 0.004 - 0.008 0.11 - 0.20 D 0.720 0.724 0.728 18.30 18.40 18.50 E - 0.315 0.319 - 8.00 8.10 e 0.020 BSC 0.50 BSC HD 0.779 0.787 0.795 19.80 20.00 20.20 L 0.016 0.020 0.024 0.40 0.50 0.60 LE - 0.032 - - 0.80 - S - - 0.020 - - 0.50 y - - 0.003 - - 0.08 θ 0° - 5° 0° - 5° Notes: 1. The maximum value of dimension D includes end flash. 2. Dimension E does not include resin fins. 3. Dimension S includes end flash. (October, 1998, Version 2.0) 14 AMIC Technology, Inc. A62S6308 Series Package Information sTSOP 32L TYPE I (8 X 13.4mm) Outline Dimensions A A1 c E A2 e unit: inches/mm θ L LE D1 D Detail "A" D Detail "A" 0.076MM S b SEATING PLANE Dimensions in inches Symbol Dimensions in mm Min Nom Max Min Nom Max A - - 0.049 - - 1.25 A1 0.002 - - 0.05 - - A2 0.037 0.039 0.041 0.95 1.00 1.05 b 0.007 0.008 0.009 0.17 0.20 0.23 c 0.0056 0.0059 0.0062 0.142 0.150 0.158 E 0.311 0.315 0.319 7.90 8.00 8.10 e 0.020 TYP 0.50 TYP D 0.520 0.528 0.535 13.20 13.40 13.60 D1 0.461 0.465 0.469 11.70 11.80 11.90 L 0.012 0.020 0.028 0.30 0.50 0.70 LE 0.0275 0.0315 0.0355 0.700 0.800 0.900 S θ 0.0109 TYP 0° 3° 0.278 TYP 5° 0° 3° 5° Notes: 1. The maximum value of dimension D1 includes end flash. 2. Dimension E does not include resin fins. 3. Dimension S includes end flash. (October, 1998, Version 2.0) 15 AMIC Technology, Inc. A62S6308 Series Package Information Mini BGA 6X8 (36 BALLS) Outline Dimensions unit : millimeter(mm) Bottom View Top View Pin A1 Index Pin A1 Index 6 5 4 3 2 1 C C1 A B C D A E F G H A B Diameter D Solder Ball B1 D E2 0.10 E1 E (October, 1998, Version 2.0) Symbol Min Typ Max A - 0.75 - B 5.90 6.00 6.10 B1 - 3.75 - C 7.90 8.00 8.10 C1 - 5.25 - D 0.30 0.35 0.40 E 1.00 1.10 1.20 E1 - 0.36 - E2 - 0.22 - 16 AMIC Technology, Inc.