Data Sheet 0630B CRYSTAL CLOCK OSCILLATORS Rev. C PECL/LVPECL UHF VCXO AB-X36DXXX Series Description The AB-X36DXXX Series of voltage controlled crystal oscillators (VCXO) provides ultra high frequency with PECL/LVPECL complementary outputs. The outputs can be disabled for test automation or combining multiple clocks. The device is based on low noise analog harmonic frequency multiplication, providing exceptionally low Phase Noise and Jitter. It is packaged in a miniature, FR-4 based 9x14 mm SMD package. Applications and Features • Wide frequency range – 200.0MHz to 1.000GHz • Fiber Channel; 10 GbE; Infiniband; Network Processors; SONET/SDH • High Reliability - NEL HALT/HASS qualified for crystal oscillator start-up conditions • Extremely Low Phase Noise, Low Jitter • SONET ±20ppm overall free-run stability available • Absolute Pull Range (APR) to ±1000 ppm • High shock resistance, to 1000g • RoHS Compliant, Lead Free Construction Creating a Part Number AB - X 36D X X X - FREQ Package Code Absolute Pull Range, ppm AB 6 pad 9x14mm SMD E ±20 F ±32 Input Voltage G ±50 0 5.0V±5% H ±100 A 3.3V±5% 9 Customer specific Enable Option H Enable High L Enable Low Temperature Range, °C A 0 to 50 B 0 to 70 C -20 to 70 D -40 to 85 9 Customer specific 357 Beloit Street, P.O. Box 457, Burlington, WI 53105-0457 U.S.A. Phone 262/763-3591 FAX 262/763-2881 Email: [email protected] www.nelfc.com Data Sheet 0630B CRYSTAL CLOCK OSCILLATORS Rev. C AB-X36DXXX Series Continued PECL/LVPECL UHF VCXO Absolute Maximum Ratings Parameter Operating Temperature Range Storage Temperature Range Supply Voltage Enable/Disable Voltage Symbol To Tst Vcc Ven/dis Value -40 to +85 -50 to +90 -0.5 to 4.5 0 to Vcc Unit ºC ºC V V Electrical Parameters Parameter Nominal Frequency Supply Voltage Symb Fo Vcc Supply current Output Logic Type Load Icc Output Levels Voh Conditions, Note Code Code A Output to Vcc-2V, or Thevenin Equivalent overall Vol Duty Cycle (Symmetry) Rise/Fall Time Jitter Integrated Tr/Tf J Wavecrest characterized Sub-harmonics Phase Noise £(Δf) Frequency Stability, usually not specified unless necessary, APR is specified to incorporate stability Control Voltage Range Setability ΔF/F Absolute Pull Range APR Input Impedance Modulation Bandwidth Enable Zin Disable Vc Vcs At 50% of output voltage swing 20 to 80, 80 to 20 % Integrated from Phase Noise, 12 KHz to 20 MHz, RMS 10 Hz to 80 KHz, RMS 50 Khz to 80 Mhz Random period, Accumul., pkto-pk Deterministic MIN 200 4.75 3.135 Unit MHz V 60 80 mA 50 Vcc1.025 45/55 Ohm V 50/50 Vcc1.620 55/45 % 0.5 0.1 0.7 0.2 ns ps 1.0 0.3 2.5 ps ps ps 25 ps ±20 1 -50 -60 -90 -118 -135 -140 -145 ±30 0V 0.4 Vcc 0.5 Vcc 622.080 MHz, APR 50ppm or less Vc to set F at Fo; T, Vcc, load - nominal, as shipped Over all conditions, see part # creation @ Fmod < 100 Khz At Vc = Vcc/2, -3dB Pin 2 = Low, 0 to Vcc1.62V Pin 2 = High, Vcc-1.025V to Vcc 5.0 3.3 MAX 1000 5.25 3.465 LVPECL @ 622.08MHz @ 10 Hz @100 Hz @1 KHz @10KHz @100KHz @>1MHz Overall, including initial calibration, temperature, aging 10 years, shock and vibration @ Vc=Vcc/2; APR 50ppm, or less TYP -46 -55 -85 -113 -130 -135 -140 ps dBc dBc/Hz ppm Vcc 0.6 Vcc 20,32, 50,100 50 20 V V ppm KOhm KHz Enabled V Disabled, Pin 4 = Logic “1", Pin 5 = Logic “0" V 357 Beloit Street, P.O. Box 457, Burlington, WI 53105-0457 U.S.A. Phone 262/763-3591 FAX 262/763-2881 Email: [email protected] www.nelfc.com CRYSTAL CLOCK OSCILLATORS Rev. C AB-X36DXXX Series Continued PECL/LVPECL UHF VCXO Electrical Connection Pin Connection 1 Vco 2 Enable/Disable 3 VEE 4 Output 5 Output Complement 6 VCC 0 .5 5 ( 1 4 m m ) 0 .3 5 ( 9 m m ) 0 .2 4 ( 6 .1 m m ) RECOM M ENDED PAD LAYOUT 0 .0 4 5 ( 1 .1 4 m m ) 0 .0 6 0 ( 1 .5 2 m m ) 0 .1 0 0 ( 5 .1 m m ) 1 2 3 6 5 4 0 .0 5 0 ( 1 .2 7 m m ) 0 .3 0 0 ( 7 .6 2 m m ) 0 .2 0 0 ( 1 0 .2 m m ) 0 .2 0 0 ( 5 .0 8 m m ) Environmental and Mechanical Characteristics Operating temp. range Mechanical Shock Thermal Shock Vibration Hermetic Seal Soldering conditions see part # table Per MIL-STD-202, Method 213, Cond. E Per MIL-STD-883, Method 1011, Cond. A Per MIL-STD-883, Method 2007, Cond. A Leak rate less than 1x10-8 atm.cc/s of helium See MAX reflow profile below Maximum Reflow Profile 357 Beloit Street, P.O. Box 457, Burlington, WI 53105-0457 U.S.A. Phone 262/763-3591 FAX 262/763-2881 Email: [email protected] www.nelfc.com