ABR800 - ABR810 AVALANCHE BRIDGE RECTIFIERS PRV : 50 - 1000 Volts Io : 8.0 Amperes BR10 0.520 (13.20) 0.480 (12.20) FEATURES : * * * * * * 0.158 (4.00) 0.142 (3.60) High case dielectric strength High surge current capability High reliability Low reverse current Low forward voltage drop ldeal for printed circuit board AC 0.77 (19.56) 0.73 (18.54) 0.290 (7.36) 0.210 (5.33) AC 0.052 (1.32) 0.048 (1.22) MECHANICAL DATA : * Case : Reliable low cost construction utilizing molded plastic technique * Epoxy : UL94V-O rate flame retardant * Lead : Axial lead solderable per MIL - STD 202 , Method 208 guaranteed * Polarity : Polarity symbols marked on case * Mounting position : Any * Weight : 6.1 grams 0.75 (19.1) Min. 0.30 (7.62) 0.25 (6.35) Dimensions in inches and ( millimeters ) MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Rating at 25 °C ambient temperature unless otherwise specified. Single phase, half wave, 60 Hz, resistive or inductive load. For capacitive load, derate current by 20%. Maximum Recurrent Peak Reverse Voltage VRRM ABR 800 50 Maximum RMS Voltage VRMS 35 70 140 280 420 560 700 Volts Maximum DC Blocking Voltage VDC 50 100 200 400 600 800 1000 Volts Minimum Avalanche Breakdown Voltage at 100 µA VBO(min.) 100 150 250 450 700 900 1100 Volts Maximum Avalanche Breakdown Voltage at 100 µA VBO(max.) 550 600 700 900 1150 1350 1550 Volts RATING SYMBOL Maximum Average Forward Current Tc = 50°C ABR 801 100 ABR 802 200 ABR 804 400 ABR 806 600 ABR 808 800 ABR 810 1000 UNITS Volts IF(AV) 8.0 Amp. IFSM 300 Amps. 2 It 160 A2S VF 1.0 Volts IR 10 µA IR(H) 10.0 mA RθJC 2.5 °C/W TJ - 50 to + 150 °C TSTG - 50 to + 150 °C Peak Forward Surge Current Single half sine wave Superimposed on rated load (JEDEC Method) Rating for fusing at ( t < 8.3 ms. ) Maximum Forward Voltage per Diode at IF = 4.0 Amps. Maximum DC Reverse Current Ta = 25 °C at Rated DC Blocking Voltage Ta = 100 °C Typical Thermal Resistance ( Note 1 ) Operating Junction Temperature Range Storage Temperature Range Notes : 1 ) Thermal resistance from Junction to case with units mounted on a 3.2" x 3.2" x 0.12" ( 8.2 x 8.2 x 0.3 cm ) Al. plate. heatsink. UPDATE : APRIL 21, 1998 RATING AND CHARACTERISTIC CURVES ( ABR800 - ABR810) FIG.1 - DERATING CURVE FOR OUTPUT RECTIFIED CURRENT FIG.2 - MAXIMUM NON-REPETITIVE PEAK FORWARD SURGE CURRENT 300 PEAK FORWARD SURGE CURRENT, AMPERES CURRENT, AMPERES HEAT-SINK MOUNTED ON 3.2" x 3.2" x0.12" (8.2x8.2x0.3 cm.) Al. PLATE 8.0 6.0 4.0 2.0 0 0 25 50 75 100 125 150 240 180 120 0 175 8.3 ms SINGLE SINE WAVE JEDEC METHOD 60 1 CASE TEMPERATURE, ( °C) 2 4 6 10 20 40 60 100 NUMBER OF CYCLES AT 60Hz FIG.3 - TYPICAL FORWARD CHARACTERISTICS FIG.4 - TYPICAL REVERSE CHARACTERISTICS REVERSE CURRENT, MICROAMPERES PER DIODE 100 FORWARD CURRENT, AMPERES AVERAGE FORWARD OUTPUT 10 TJ = 25 °C 10 1.0 Pulse Width = 300 µs 1% Duty Cycle 0.1 10 TJ = 100 °C 1.0 0.1 TJ = 25 °C 0.01 0 20 40 60 80 100 120 PERCENT OF RATED REVERSE VOLTAGE, (%) 0.01 0 0.2 0.4 0.6 0.8 1.0 1.2 1.4 1.6 FORWARD VOLTAGE, VOLTS 1.8 2.0 140