VDE HIGH ENVIRONMENTAL RESISTANCE TURQUOISE SWITCHES ABS TYPE FEATURES 19.3 • Subminiature size (19.8×11.1×6.4 mm) • Sealed construction for use in adverse environment-Sealed construction by epoxy resin and rubber cap greatly reduces possible miscontact due to contaminants such as dust. Conforming to IP67* of IEC protective construction classification • Elastomer double molding technology, an industry first and ultrasonic swaging technology contribute to uniform sealing in high production quantities • Expansion of low-level circuit type • We offer a Au clad 2-ply contact type (for small loads) that we developed specifically for small current and voltage loads in the range of 1 mA to 100 mA and 5 V to 30 V. • UL/CSA/VDE/SEMKO approved (AS for Au-clad twin layer, VDE and SEMKO are not approved.) * Based on the protective construction classification of IEC, items which satisfy the test requirements are denoted with an IP designation. 6.4 11.1 TYPICAL APPLICATIONS • Automotive • Home appliances (vacuum cleaner, air purifier) • Others (gas cooking range) RoHS compliant ORDERING INFORMATION Ex. ABS Type of switch Wire and terminal position 1 Terminal ABS: 1: Straight type 1: .110 quick-connect Turquoise 4: Right angle terminal switch 5: Left angle 4: Solder terminal S type 5: PC board terminal 6: Wire leads Remarks: 1. 2. 3. 4. 5. 1 1 0 4 0 3 Operating force by Contact* Agency standard pin plunger (max.) 1: SPDT 0: Pin plunger 4: 0.98 N 0: AgNi alloy 3: UL/CSA/VDE/SEMKO 2: SPST-NC 1: Short hinge lever 5: 1.47 N 1: Au-clad (AgNi alloy contact, 3: SPST-NO 2: Hinge lever triple layer Au-clad triple layer type) 3: Long hinge lever 4: Au-clad 9: UL/CSA 4: Simulated roller double layer (Au-clad double layer type) lever 6: Roller lever 8: Leaf lever Contact arrangement Actuator Standard packing: Dust protected type 100 pcs./carton, 1,000 pcs./case; Immersion protected type 50 pcs./case. SPST-NC and SPST-NO are only available for wire leads type. Leaf lever is only available for wire leads type Wire leads type with agency standard will be discontinued from August 31, 2012. As for wire position: Straight type Wire opposite to the actuator side type (Right angle) Wire actuator side type (Left angle) 5. Not every combination is available. Please refer to the following table, “PRODUCT TYPES”. * Contact 0: AgNi alloy 1: Au-clad triple layer AgNi alloy Au-clad AgNi alloy CuNi alloy Panasonic Corporation Automation Controls Business Unit 4: Au-clad double layer Au-clad CuNi alloy industrial.panasonic.com/ac/e AECTB2E 201201-T ABS1,4,5 CONTACT ARRANGEMENT 1. SPDT 2. SPST-NC (Wire leads type only) COM NO NC COM 3. SPST-NO (Wire leads type only) NC COM NO PRODUCT TYPES 1. Dust protected type AgNi alloy Actuator Pin plunger Short hinge lever Hinge lever Long hinge lever Simulated roller lever Roller lever Operating force Max. .110 quick-connect terminal Solder terminal 0.98 N 1.47 N 0.39 N 0.59 N 0.34 N 0.54 N 0.25 N 0.44 N ABS1110403 ABS1110503 ABS1111403 ABS1111503 ABS1112403 ABS1112503 ABS1113403 ABS1113503 ABS1410403 ABS1410503 ABS1411403 ABS1411503 ABS1412403 ABS1412503 ABS1413403 ABS1413503 0.34 N 0.54 N 0.39 N 0.59 N ABS1114403 ABS1114503 ABS1116403 ABS1116503 ABS1414403 ABS1414503 ABS1416403 ABS1416503 Operating force Max. .110 quick-connect terminal Solder terminal 0.98 N 1.47 N 0.39 N 0.59 N 0.34 N 0.54 N 0.25 N 0.44 N 0.34 N 0.54 N 0.39 N 0.59 N ABS1110413 ABS1110513 ABS1111413 ABS1111513 ABS1112413 ABS1112513 ABS1113413 ABS1113513 ABS1114413 ABS1114513 ABS1116413 ABS1116513 ABS1410413 ABS1410513 ABS1411413 ABS1411513 ABS1412413 ABS1412513 ABS1413413 ABS1413513 ABS1414413 ABS1414513 ABS1416413 ABS1416513 Operating force Max. .110 quick-connect terminal Solder terminal 0.98 N 1.47 N 0.39 N 0.59 N 0.34 N 0.54 N 0.25 N 0.44 N 0.34 N 0.54 N 0.39 N 0.59 N ABS1110449 ABS1110549 ABS1111449 ABS1111549 ABS1112449 ABS1112549 ABS1113449 ABS1113549 ABS1114449 ABS1114549 ABS1116449 ABS1116549 ABS1410449 ABS1410549 ABS1411449 ABS1411549 ABS1412449 ABS1412549 ABS1413449 ABS1413549 ABS1414449 ABS1414549 ABS1416449 ABS1416549 Straight ABS1510403 ABS1510503 ABS1511403 ABS1511503 ABS1512403 ABS1512503 ABS1513403 ABS1513503 PC board terminal Terminal position Right angle ABS4510403 ABS4510503 ABS4511403 ABS4511503 ABS4512403 ABS4512503 ABS4513403 ABS4513503 Left angle ABS5510403 ABS5510503 ABS5511403 ABS5511503 ABS5512403 ABS5512503 ABS5513403 ABS5513503 ABS1514403 ABS1514503 ABS1516403 ABS1516503 ABS4514403 ABS4514503 ABS4516403 ABS4516503 ABS5514403 ABS5514503 ABS5516403 ABS5516503 Straight ABS1510413 ABS1510513 ABS1511413 ABS1511513 ABS1512413 ABS1512513 ABS1513413 ABS1513513 ABS1514413 ABS1514513 ABS1516413 ABS1516513 PC board terminal Terminal position Right angle ABS4510413 ABS4510513 ABS4511413 ABS4511513 ABS4512413 ABS4512513 ABS4513413 ABS4513513 ABS4514413 ABS4514513 ABS4516413 ABS4516513 Left angle ABS5510413 ABS5510513 ABS5511413 ABS5511513 ABS5512413 ABS5512513 ABS5513413 ABS5513513 ABS5514413 ABS5514513 ABS5516413 ABS5516513 Straight ABS1510449 ABS1510549 ABS1511449 ABS1511549 ABS1512449 ABS1512549 ABS1513449 ABS1513549 ABS1514449 ABS1514549 ABS1516449 ABS1516549 PC board terminal Terminal position Right angle ABS4510449 ABS4510549 ABS4511449 ABS4511549 ABS4512449 ABS4512549 ABS4513449 ABS4513549 ABS4514449 ABS4514549 ABS4516449 ABS4516549 Left angle ABS5510449 ABS5510549 ABS5511449 ABS5511549 ABS5512449 ABS5512549 ABS5513449 ABS5513549 ABS5514449 ABS5514549 ABS5516449 ABS5516549 Au-clad triple layer Actuator Pin plunger Short hinge lever Hinge lever Long hinge lever Simulated roller lever Roller lever Au-clad double layer Actuator Pin plunger Short hinge lever Hinge lever Long hinge lever Simulated roller lever Roller lever * Agency standard: Please refer to “Ordering information”. AECTB2E 201201-T Panasonic Corporation Automation Controls Business Unit industrial.panasonic.com/ac/e ABS1,4,5 2. Immersion protected type (3 wire leads type SPDT) With agency standard type will be discontinued from August 31, 2012. AgNi alloy Actuator Pin plunger Short hinge lever Hinge lever Long hinge lever Simulated roller lever Roller lever Straight ABS1610403 ABS1610503 ABS1611403 ABS1611503 ABS1612403 ABS1612503 ABS1613403 ABS1613503 ABS1614403 ABS1614503 ABS1616403 ABS1616503 SPDT Wire position Right angle ABS4610403 ABS4610503 ABS4611403 ABS4611503 ABS4612403 ABS4612503 ABS4613403 ABS4613503 ABS4614403 ABS4614503 ABS4616403 ABS4616503 Left angle ABS5610403 ABS5610503 ABS5611403 ABS5611503 ABS5612403 ABS5612503 ABS5613403 ABS5613503 ABS5614403 ABS5614503 ABS5616403 ABS5616503 0.98 N Straight ABS1610413 SPDT Wire position Right angle ABS4610413 Left angle ABS5610413 1.47 N 0.39 N 0.59 N 0.34 N 0.54 N 0.25 N 0.44 N 0.34 N 0.54 N 0.39 N 0.59 N ABS1610513 ABS1611413 ABS1611513 ABS1612413 ABS1612513 ABS1613413 ABS1613513 ABS1614413 ABS1614513 ABS1616413 ABS1616513 ABS4610513 ABS4611413 ABS4611513 ABS4612413 ABS4612513 ABS4613413 ABS4613513 ABS4614413 ABS4614513 ABS4616413 ABS4616513 ABS5610513 ABS5611413 ABS5611513 ABS5612413 ABS5612513 ABS5613413 ABS5613513 ABS5614413 ABS5614513 ABS5616413 ABS5616513 Straight ABS1610449 ABS1610549 ABS1611449 ABS1611549 ABS1612449 ABS1612549 ABS1613449 ABS1613549 ABS1614449 ABS1614549 ABS1616449 ABS1616549 SPDT Wire position Right angle ABS4610449 ABS4610549 ABS4611449 ABS4611549 ABS4612449 ABS4612549 ABS4613449 ABS4613549 ABS4614449 ABS4614549 ABS4616449 ABS4616549 Left angle ABS5610449 ABS5610549 ABS5611449 ABS5611549 ABS5612449 ABS5612549 ABS5613449 ABS5613549 ABS5614449 ABS5614549 ABS5616449 ABS5616549 Operating force Max. 0.98 N 1.47 N 0.39 N 0.59 N 0.34 N 0.54 N 0.25 N 0.44 N 0.34 N 0.54 N 0.39 N 0.59 N Au-clad triple layer Actuator Pin plunger Short hinge lever Hinge lever Long hinge lever Simulated roller lever Roller lever Operating force Max. Au-clad double layer Actuator Pin plunger Short hinge lever Hinge lever Long hinge lever Simulated roller lever Roller lever Operating force Max. 0.98 N 1.47 N 0.39 N 0.59 N 0.34 N 0.54 N 0.25 N 0.44 N 0.34 N 0.54 N 0.39 N 0.59 N * Agency standard: Please refer to “Ordering information”. Panasonic Corporation Automation Controls Business Unit industrial.panasonic.com/ac/e AECTB2E 201201-T ABS1,4,5 3. Immersion protected type (2 wire leads type SPST-NC) With agency standard type will be discontinued from August 31, 2012. AgNi alloy Actuator Pin plunger Short hinge lever Hinge lever Long hinge lever Simulated roller lever Roller lever Straight ABS1620403 ABS1620503 ABS1621403 ABS1621503 ABS1622403 ABS1622503 ABS1623403 ABS1623503 ABS1624403 ABS1624503 ABS1626403 ABS1626503 SPST-NC Wire position Right angle ABS4620403 ABS4620503 ABS4621403 ABS4621503 ABS4622403 ABS4622503 ABS4623403 ABS4623503 ABS4624403 ABS4624503 ABS4626403 ABS4626503 Straight SPST-NC Wire position Right angle Left angle ABS1620413 ABS1620513 ABS1621413 ABS1621513 ABS1622413 ABS1622513 ABS1623413 ABS1623513 ABS1624413 ABS1624513 ABS1626413 ABS1626513 ABS4620413 ABS4620513 ABS4621413 ABS4621513 ABS4622413 ABS4622513 ABS4623413 ABS4623513 ABS4624413 ABS4624513 ABS4626413 ABS4626513 ABS5620413 ABS5620513 ABS5621413 ABS5621513 ABS5622413 ABS5622513 ABS5623413 ABS5623513 ABS5624413 ABS5624513 ABS5626413 ABS5626513 Straight ABS1620449 ABS1620549 ABS1621449 ABS1621549 ABS1622449 ABS1622549 ABS1623449 ABS1623549 ABS1624449 ABS1624549 ABS1626449 ABS1626549 SPST-NC Wire position Right angle ABS4620449 ABS4620549 ABS4621449 ABS4621549 ABS4622449 ABS4622549 ABS4623449 ABS4623549 ABS4624449 ABS4624549 ABS4626449 ABS4626549 Left angle ABS5620449 ABS5620549 ABS5621449 ABS5621549 ABS5622449 ABS5622549 ABS5623449 ABS5623549 ABS5624449 ABS5624549 ABS5626449 ABS5626549 Operating force Max. 0.98 N 1.47 N 0.39 N 0.59 N 0.34 N 0.54 N 0.25 N 0.44 N 0.34 N 0.54 N 0.39 N 0.59 N Left angle ABS5620403 ABS5620503 ABS5621403 ABS5621503 ABS5622403 ABS5622503 ABS5623403 ABS5623503 ABS5624403 ABS5624503 ABS5626403 ABS5626503 Au-clad triple layer Actuator Pin plunger Short hinge lever Hinge lever Long hinge lever Simulated roller lever Roller lever Operating force Max. 0.98 N 1.47 N 0.39 N 0.59 N 0.34 N 0.54 N 0.25 N 0.44 N 0.34 N 0.54 N 0.39 N 0.59 N Au-clad double layer Actuator Pin plunger Short hinge lever Hinge lever Long hinge lever Simulated roller lever Roller lever Operating force Max. 0.98 N 1.47 N 0.39 N 0.59 N 0.34 N 0.54 N 0.25 N 0.44 N 0.34 N 0.54 N 0.39 N 0.59 N * Agency standard: Please refer to “Ordering information”. AECTB2E 201201-T Panasonic Corporation Automation Controls Business Unit industrial.panasonic.com/ac/e ABS1,4,5 4. Immersion protected type (2 wire leads type SPST-NO) With agency standard type will be discontinued from August 31, 2012. AgNi alloy Actuator Pin plunger Short hinge lever Hinge lever Long hinge lever Simulated roller lever Roller lever Straight ABS1630403 ABS1630503 ABS1631403 ABS1631503 ABS1632403 ABS1632503 ABS1633403 ABS1633503 ABS1634403 ABS1634503 ABS1636403 ABS1636503 SPST-NO Wire position Right angle ABS4630403 ABS4630503 ABS4631403 ABS4631503 ABS4632403 ABS4632503 ABS4633403 ABS4633503 ABS4634403 ABS4634503 ABS4636403 ABS4636503 Straight SPST-NO Wire position Right angle Left angle ABS1630413 ABS1630513 ABS1631413 ABS1631513 ABS1632413 ABS1632513 ABS1633413 ABS1633513 ABS1634413 ABS1634513 ABS1636413 ABS1636513 ABS4630413 ABS4630513 ABS4631413 ABS4631513 ABS4632413 ABS4632513 ABS4633413 ABS4633513 ABS4634413 ABS4634513 ABS4636413 ABS4636513 ABS5630413 ABS5630513 ABS5631413 ABS5631513 ABS5632413 ABS5632513 ABS5633413 ABS5633513 ABS5634413 ABS5634513 ABS5636413 ABS5636513 Straight ABS1630449 ABS1630549 ABS1631449 ABS1631549 ABS1632449 ABS1632549 ABS1633449 ABS1633549 ABS1634449 ABS1634549 ABS1636449 ABS1636549 SPST-NO Wire position Right angle ABS4630449 ABS4630549 ABS4631449 ABS4631549 ABS4632449 ABS4632549 ABS4633449 ABS4633549 ABS4634449 ABS4634549 ABS4636449 ABS4636549 Left angle ABS5630449 ABS5630549 ABS5631449 ABS5631549 ABS5632449 ABS5632549 ABS5633449 ABS5633549 ABS5634449 ABS5634549 ABS5636449 ABS5636549 Operating force Max. 0.98 N 1.47 N 0.39 N 0.59 N 0.34 N 0.54 N 0.25 N 0.44 N 0.34 N 0.54 N 0.39 N 0.59 N Left angle ABS5630403 ABS5630503 ABS5631403 ABS5631503 ABS5632403 ABS5632503 ABS5633403 ABS5633503 ABS5634403 ABS5634503 ABS5636403 ABS5636503 Au-clad triple layer Actuator Pin plunger Short hinge lever Hinge lever Long hinge lever Simulated roller lever Roller lever Operating force Max. 0.98 N 1.47 N 0.39 N 0.59 N 0.34 N 0.54 N 0.25 N 0.44 N 0.34 N 0.54 N 0.39 N 0.59 N Au-clad double layer Actuator Pin plunger Short hinge lever Hinge lever Long hinge lever Simulated roller lever Roller lever Operating force Max. 0.98 N 1.47 N 0.39 N 0.59 N 0.34 N 0.54 N 0.25 N 0.44 N 0.34 N 0.54 N 0.39 N 0.59 N * Agency standard: Please refer to “Ordering information”. Panasonic Corporation Automation Controls Business Unit industrial.panasonic.com/ac/e AECTB2E 201201-T ABS1,4,5 5. Immersion protected type (3 wire leads type SPDT) With agency standard type will be discontinued from August 31, 2012. • Leaf lever type AgNi alloy Actuator 0.88 N 1.08 N Leaf lever Straight ABS1618403 ABS1618503 SPDT Wire position Right angle ABS4618403 ABS4618503 Left angle ABS5618403 ABS5618503 Straight ABS1618413 ABS1618513 SPDT Wire position Right angle ABS4618413 ABS4618513 Left angle ABS5618413 ABS5618513 Straight ABS1618449 ABS1618549 SPDT Wire position Right angle ABS4618449 ABS4618549 Left angle ABS5618449 ABS5618549 Operating force Max. Au-clad triple layer Actuator Operating force Max. 0.88 N 1.08 N Leaf lever Au-clad double layer Actuator Operating force Max. 0.88 N 1.08 N Leaf lever 6. Immersion protected type (2 wire leads type SPST-NC) With agency standard type will be discontinued from August 31, 2012. • Leaf lever type AgNi alloy Actuator 0.88 N 1.08 N Leaf lever Straight ABS1628403 ABS1628503 SPST-NC Wire position Right angle ABS4628403 ABS4628503 Left angle ABS5628403 ABS5628503 Straight ABS1628413 ABS1628513 SPST-NC Wire position Right angle ABS4628413 ABS4628513 Left angle ABS5628413 ABS5628513 Straight ABS1628449 ABS1628549 SPST-NC Wire position Right angle ABS4628449 ABS4628549 Left angle ABS5628449 ABS5628549 Operating force Max. Au-clad triple layer Actuator Operating force Max. 0.88 N 1.08 N Leaf lever Au-clad double layer Actuator Operating force Max. 0.88 N 1.08 N Leaf lever 7. Immersion protected type (2 wire leads type SPST-NO) With agency standard type will be discontinued from August 31, 2012. • Leaf lever type AgNi alloy Actuator 0.88 N 1.08 N Leaf lever Straight ABS1638403 ABS1638503 SPST-NO Wire position Right angle ABS4638403 ABS4638503 Left angle ABS5638403 ABS5638503 Straight ABS1638413 ABS1638513 SPST-NO Wire position Right angle ABS4638413 ABS4638513 Left angle ABS5638413 ABS5638513 Operating force Max. Au-clad triple layer Actuator Leaf lever Operating force Max. 0.88 N 1.08 N * Agency standard: Please refer to “Ordering information”. AECTB2E 201201-T Panasonic Corporation Automation Controls Business Unit industrial.panasonic.com/ac/e ABS1,4,5 Au-clad double layer SPST-NO Wire position Right angle ABS4638449 ABS4638549 Operating force Max. gf Actuator Straight ABS1638449 ABS1638549 0.89 N 1.08 N Leaf lever Left angle ABS5638449 ABS5638549 * Agency standard: Please refer to “Ordering information”. SPECIFICATIONS 1. Contact rating AgNi alloy contact type Voltage 125 V AC 250 V AC 30 V DC 125 V DC Resistive load 2A 2A 2A 0.4 A Inductive load 2A 2A 2A 0.05 A Au-clad contact type Au-clad Au-clad triple layer twin layer Resistive load 0.1 A — 0.1 A — 0.1 A 0.1 A — — Low-level circuit rating (Au-clad contact type) Rated voltage 6 V DC 12 V DC 24 V DC Resistive load 5 mA 2 mA 1 mA Recommended contact material chart classified by load voltage & current (reference) 2A Silver-alloy 100mA Gold-clad triple layer Gold-clad double layer 1mA 0 DC AC 5 5 15 30V 30 250V Remarks: If the contact is being used in the constant low-level circuit load range, the Au-clad twin layer contact is recommended. If there is a danger of the current being less than 0.5 A, for instance if the contact is being turned on and off, the Au-clad triple layer type is recommended. 2. Characteristics Mechanical life (O.T.: Specified value) Electrical life at rated load (O.T.: Max.) Min. 5x105 (at 60 cpm) Min. 5x106 (at 60 cpm) Min. 5x104 (at 20 cpm) Min. 2x105 (at 20 cpm) Min. 100 MΩ (at 500 V DC insulation resistance meter) Leaf lever Other types AgNi alloy contact type Au-clad contact type Insulation resistance Dielectric strength Between non-continuous terminals Between each terminal and other exposed metal parts Between each terminal and ground Vibration resistance (Pin plunger type) Shock resistance (Pin plunger type) 1,000 Vrms 1,500 Vrms 1,500 Vrms 10 to 55 Hz at single amplitude of 0.75 mm (Contact opening Max. 1 msec.) Min. 294 m/s2 (Contact opening Max. 1 msec.) AgNi alloy contact type Dust protected type (IP50): Max. 50 mΩ Immersion protected type (IP67): Max. 100 mΩ (By voltage drop 1 A 6 to 8 V DC) Au-clad contact type Dust protected type (IP50): Max. 100 mΩ Immersion protected type (IP67): Max. 150 mΩ (By voltage drop 0.1 A 6 to 8 V DC) Contact resistance (Initial) Allowable operating speed (at no load) Max. operating cycle rate (at no load) Ambient temperature Unit weight Water resistance 0.1 to 500 mm/sec. 120 cpm –40°C to +85°C Approx. 2 g (IP50 type) IP67 (Wire leads type) 3. Operating characteristics Type of actuator Pin plunger Short hinge lever Hinge lever Long hinge lever Simulated roller lever Roller lever Leaf lever Operating force, Max. 0.98N 0.39N 0.34N 0.25N 0.34N 0.39N 0.88N Panasonic Corporation 1.47N 0.59N 0.54N 0.44N 0.54N 0.59N 1.08N Release force, Min. 0.15N 0.034N 0.029N 0.025N 0.029N 0.034N 0.17N 0.20N 0.039N 0.034N 0.029N 0.034N 0.039N 0.20N Automation Controls Business Unit Pretravel, Max. mm Movement differential, Max. mm Overtravel, Min. mm 0.6 2.5 2.8 3.5 2.8 2.5 4.5 0.1 0.5 0.8 1.0 0.8 0.5 1.0 0.4 0.8 1.2 1.6 1.2 0.8 2.5 industrial.panasonic.com/ac/e Operating position, mm 8.4±0.3 8.8±0.8 8.8±0.8 8.8±1.2 11.65±0.8 14.5±0.8 14.5±1.5 AECTB2E 201201-T ABS1,4,5 DIMENSIONS The CAD data of the products with a CAD Data mark can be downloaded from: http://industrial.panasonic.com/ac/e mm General tolerance: ±0.25 1. Dust protected type 1-(1) .110 quick-connect terminal Pin plunger CAD Data 1.7 dia. Pretravel 0.6 max. 7.6±0.3 Operating Position 8.4±0.3 7.7 6.7 +0.1 2.4−0.05 11.8±0.4 3.4±0.1 2.4 +0.1 11 2.4−0.05 dia. 5.5±0.1 7.1±0.15 2.5±0.1 C0.6 2.8±0.1 1.2±0.05 dia. 9.5±0.1 6.4±0.2 4 7.6±0.15 7.6±0.15 19.8±0.3 Pretravel, Max. mm Movement differential, Max. mm Overtravel, Min. mm Distance from mounting hole, mm Operating position Distance from stand-off, mm 0.6 0.1 0.4 8.4±0.3 11.8±0.4 Short hinge lever CAD Data 12.85 5±0.4 Pretravel 2.5 max. R18 4 (3.7) Pretravel, Max. mm Movement differential, Max. mm Overtravel, Min. mm Distance from mounting hole, mm Operating position Distance from stand-off, mm Operating Position 8.8±0.8 6.3 12.2±0.9 2.5 0.5 0.8 8.8±0.8 12.2±0.9 Hinge lever CAD Data 7.15±0.4 Pretravel 2.8 max. R20.2 4 (3.7) Pretravel, Max. mm Movement differential, Max. mm Overtravel, Min. mm Distance from mounting hole, mm Operating position Distance from stand-off, mm Operating Position 8.8±0.8 12.2±0.9 2.8 0.8 1.2 8.8±0.8 12.2±0.9 Long hinge lever 13.1±0.4 CAD Data Pretravel 3.5 max. R26.1 4 (3.5) Operating Position 8.8±1.2 12.2±1.3 AECTB2E 201201-T Panasonic Corporation Automation Controls Business Unit Pretravel, Max. mm Movement differential, Max. mm Overtravel, Min. mm Distance from mounting hole, mm Operating position Distance from stand-off, mm 3.5 1 1.6 8.8±1.2 12.2±1.3 industrial.panasonic.com/ac/e ABS1,4,5 mm General tolerance: ±0.25 Simulated roller lever CAD Data 6.3±0.4 4 (3.5) Pretravel 2.8 max. R19.9 R2.5 Pretravel, Max. mm Movement differential, Max. mm Overtravel, Min. mm Distance from mounting hole, mm Operating position Distance from stand-off, mm Operating Position 11.65±0.8 15.05±0.9 2.8 0.8 1.2 11.65±0.8 15.05±0.9 Roller lever CAD Data 5.15±0.4 3.2 Pretravel 2.5 max. R18.9 5 dia. 17.9±0.9 Pretravel, Max. mm Movement differential, Max. mm Overtravel, Min. mm Distance from mounting hole, mm Operating position Distance from stand-off, mm Operating Position 14.5±0.8 2.5 0.5 0.8 14.5±0.8 17.9±0.9 1-(2) Solder terminal CAD Data +0.1 2.4-0.05 2.4 1.1±0.12 3.4±0.15 7.4 +0.1 -0.05 2.4 2.4 dia. 1.5±0.12 1.85±0.2 2.5±0.1 1.9 9.5±0.1 0.5 2.8±0.2 1.25±0.1 8.7±0.15 5.2 6.4±0.2 15.4±0.15 19.8±0.3 Remarks: Dimensions of the actuator types are the same as those of corresponding .110 quick-connect terminal types. 1-(3) PC board terminal Straight type CAD Data +0.1 2.4-0.05 1.2±0.05 dia. 2.4 1.1±0.12 3.4±0.15 8.7±0.1 15.4±0.1 7.4 +0.1 2.4-0.05 dia. 2.5±0.1 0.9 9.5±0.1 8.7±0.15 1.85±0.2 0.5 1.25±0.1 2.2 15.4±0.15 19.8±0.3 Panasonic Corporation 1.5±0.12 Automation Controls Business Unit 5.2 6.4±0.2 Remarks: Dimensions of the actuator types are the same as those of corresponding .110 quick-connect terminal types. industrial.panasonic.com/ac/e AECTB2E 201201-T ABS1,4,5 mm General tolerance: ±0.25 Right angle type CAD Data 3-1.5±0.05 dia. 7.62±0.1 5.08±0.2 6.4 7.62±0.15 0.5 7.62±0.15 7.62±0.1 Remarks: Dimensions of the actuator types are the same as those of corresponding .110 quick-connect terminal types. Left angle type CAD Data 3-1.5±0.05 dia. 7.62±0.1 5.08±0.2 1.3 6-C0.3 (2.8) 7.62±0.15 7.62±0.15 7.62±0.15 7.62±0.15 0.5 7.62±0.1 6.4 1.3 3.2 6.4 Remarks: Dimensions of the actuator types are the same as those of corresponding .110 quick-connect terminal types. 2. Immersion protected type Wire leads Pin plunger Straight type 21.2 6.4 Thickness of the lead wire: 0.5 mm2 UL/CSA approved type and Right/Left angle type: AWG #20 Color of the lead wire: COM ...Black N.C. ...Red N.O. ...White CAD Data +0.1 2.4-0.05 dia. 9.2 COM NO Remarks: 1. Other dimensions are the same as those of .110 quick-connect terminal types. 2. Dimensions of the actuator types are the same as those of corresponding .110 quickconnect terminal types. NC 300±10 5±2 Right angle type Left angle type 5±2 300±10 AECTB2E 201201-T Panasonic Corporation Automation Controls Business Unit 5±2 300±10 industrial.panasonic.com/ac/e ABS1,4,5 mm General tolerance: ±0.25 Leaf lever Straight type CAD Data 5 7.6±0.3 8±1 Pretravel 4.5 max. 1.5 Free Position (16.5) Operating Position 14.5±1.5 7.7 Totaltravel Position (10.5 min.) +0.1 8.4 2.5±0.1 Thickness of the lead wire: 0.5 mm2 UL/CSA approved type and Right/Left angle type: AWG #20 Color of the lead wire: COM ...Black N.C. ...Red N.O. ...White 8.4 2.4-0.05 dia. 6.4 300±10 5±2 23.8±0.4 Right angle type Left angle type 5 5 6.4 6.4 5±2 5±2 300±10 Panasonic Corporation Automation Controls Business Unit 300±10 industrial.panasonic.com/ac/e AECTB2E 201201-T