Series 2 Inert isolation soleniod valves FEATURES · 2-way diaphragm valves · All PTFE wetted parts · High cycle life · Uses low power · Low internal volume · Requires no pressure to operate PHYSICAL PROPERTIES MEDIA COMPATIBILITY Liquids and gases Operating environment 4 to 66 °C Weight (e.g. 3-way, 1/8" NPT body) WETTED MATERIALS Porting Materials contacting media: PTFE Internal volume 71 g 1/4"-28 threaded ports 49 µl Body: PTFE ELECTRICAL Power 2.5, 4.2 W Voltage 12, 24 VDC Current/Resistance (Ω ±5% @ 21 °C) 12 VDC 211 mA/57 Ω 24 VDC 173 mA/139 Ω January 2007 / 271 1/3 www.sensortechnics.com Series 2 Inert isolation soleniod valves PERFORMANCE CHARACTERISTICS Part no. Pressure Orifice siz es Leak rate R esp o n se See Ordering Information Vacuum...1.4 bar (20 psi) 0.060" (1.52 mm) Bubble tight 20 ms FLOW CURVES Air flow, 0.060" orifice Water flow, 0.060" orifice January 2007 / 271 2/3 www.sensortechnics.com Series 2 Inert isolation soleniod valves OUTLINE DRAWING N.C. COM PTFE insulated lead wires # 26 AWG x 24" (61 cm) long Ø 0.81 (20.6) 2.06 (52.3) Outlet port (common) 1/4"-28 UNF-2B 0.93 (23.6) 0.52 (13.2) Ø 1.00 (25.4) Inlet port (N.C.) 1/4"-28 UNF-2B # 6-32 UNC-28 x 0.20" (5.1 mm) min. DP 4 pl. eq. sp. on 0.700" (17.8 mm) B.C. dimensions in inches (mm) ORDERING INFORMATION Part No. 002-0017-900 002-0010-900 Type Operating Pressure Orifice Voltage 2-way NC Vac...1.4 bar (20 psi) 1.52 mm (0.060") 12 V D C 24 V D C Porting 1/4"-28 Sensortechnics reserves the right to make changes to any products herein. Sensortechnics does not assume any liability arising out of the application or use of any product or circuit described herein, neither does it convey any license under its patent rights nor the rights of others. January 2007 / 271 3/3 www.sensortechnics.com