3.3Vdc • HCMOS/ TTL COMPATIBLE FULL-SIZE AND HALF-SIZE DIP CRYSTAL CLOCK OSCILLATORS ACOL and ACHL 20.2 x 12.6 x 5.08 mm FEATURES: • Tristate Enable / Disable option. • HCMOS and TTL compatible. • Low power • Low voltage 3.3Vdc. • Tight symmetry option. APPLICATIONS: • Clock signal sources for digital chips and microprocessors. • Low power applications. STANDARD SPECIFICATIONS PARAMETERS SPECIFICATIONS STANDARD SPECIACOL FIC(14 ADIP) TIand ON S Package Type ACHL (8 DIP) Frequency Range (Fo) Operating Temperature (TOPR) Storage Temperature (TSTO) Frequency Stability (DF/ Fo) Supply Voltage (Vdd) Input Current (I dd) 32.768 k Hz - 200 MHz 0°C to +70°C (See Options) -55°C to +125°C ±100ppm max. (See Options) 3.3Vdc ±10% _ 20 MHz 20m A max. for F < _ 70 MHz 25m A max. for F < _ 200 MHz 50m A max. for F < ACOL (14 DIP) Dimensions: Inches (mm) Duty Cycle or Symmetry 40 / 60% max. (typical 45 / 55%) (See Options) Rise and Fall Times (TR / TF) 10ns max. Output Load 5TTL or 15pF Output Voltage 0.9*Vdd min. (VOH) ; 0.1*Vdd max. (VOL) Start-up Time (TOSC) 10ms max. > _ 2.2V Tristate Function (VIH) “1” or Open: Oscillation (Option “-A” ONLY) (VIL) “0”:Output disabled in high impedance (Hi Z) < 0.8V Output Disable / Enable Time 100ns max. (for Option “- A” ONLY) * Pin 1 has internal pull-up resistor which allows Pin 1 to be left floating (enable high) opt. A. Test circuit, waveforms, see appendix B. Recommended handling, see appendix F. Environmental and mechanical specifications, see appendix C. Group 1. Marking, see appendix G. Value added, see appendix D. Application notes, see appendix A. ORDERING OPTIONS ORDERING OPTIONS ACH L ( 8 DIP) ACX L - Frequency - Temperature - Overall Frequency Stability - Duty Cycle - Tristate - Value Added - Packaging -G Gull Wing* O or H -T for Tape and reel -Y for ± 10 ppm max** -S for 45 / 55% @ 1/ 2 Vdd -G2 Gull Wing * (ACHL Only) -TY for Tray packing -J for ± 20 ppm max 1/ 2 Vdd @ -T for 47.5 / 52.5% XX.XXXXX MHz or kHz -QXX (Trimmed Leads) * -R for ± 25 ppm max -S1 for 45 / 55% @ 1.4 Vdc PIN # PIN # -K for ± 30 ppm max FUNCTION -D for -10°C to + 60°C ACOL ACHL -H for ± 35 ppm max A for Tristate E / D -E for -20°C to + 70°C 1 1 NC or E/D -F for -30°C to + 70°C -C for ± 50 ppm max 7 4 GND / Case ** Standard Operating -N for -30°C to + 85°C 8 5 Output Temperature Only -L for -40°C to + 85°C Frequency 50 MHz max 14 8 Vdd ABRACON 52 ® C O R P O R AT I O N NOTE: Left blank if standard • All specifications and markings subject to change without notice 29 Journey • Aliso Viejo, CA 92656 • USA (949) 448-7070 • F AX : (949) 448-8484 E-MAIL: abinfo@ abracon.com • INTERNET ADDRESS: www.abracon.com ABRACON IS ISO 9001 / QS 9000 CERTIFIED