Tel : Fax : email : 0044 (0)118 979 1238 0044 (0)118 979 1283 [email protected] ACT2016SMX-4 The ACT2016SMX-4 is an extremely compact, high quality, low aging, seam welded crystal. Utilising a ceramic base with a metal lid, it provides for the durability and reliability, necessary for strenuous processes like infrared and vapour reflow. The lid is grounded through the package, to assist with EMC Issues, and the pads are gold plated. The device is very suitable for automatic placement on PCB's. With an excellent range of frequencies and stabilities it is an optimum choice for designs where PCB space is at a premium. Applications include: PDA, Cellular, MPU Clocks, ISM, Bluetooth, WLan, and consummer electronics. Available loose or on reels (Standard 3,000 pieces / reel.). Specification Parameter Symbol Specification Condition Frequency Range Frequency Tolerance Stability over Temp Range Temp Operating Range Temp Storage Range Equivalent Series Resistance Load Capacitance Shunt Capacitance Drive Level FDLD RDLD Insulation Resistance Reflow Process Aging fo ∆f/fo Tc Topr Tstg ESR CL C0 DL 24.00 ~ 54.00 MHz AT Fundamental ±10ppm ~ 30ppm @25°C±3°C (refer to table 2) ±10ppm ~ 30ppm (refer to table 2) -20 ~ +70°C Standard (refer to table 2) -40 ~ +85°C Please refer to Table 1 8 ~ 16pF 3pF max 50µW typical (100µW max) d+/-30% ESR d+/-10ppm 500MΩ min 10 Seconds @ 260°C (max) ±2ppm / 1st year max Please specify Please Specify Please specify Please specify IR Fa Please specify 20 steps 20 steps @100V DC @25°C Table 1 Frequency(MHz) ESR Ω max Mode 24.0~24.999 25.0~35.999 36.0~60.000 100 80 60 Fundamental Fundamental Fundamental Pad surface material Au Standard frequencies (MHz) : 24.000, 26.000, 32.000, 38.400, 40.000, 48.000 Table 2 Tolerance Stability E: Enquire 25°C -20~+70°C -30~+85°C -40~+85°C ±10ppm ±20ppm E ±30ppm E Please note that all parameters can not necessarily be specified in the same device Customer to specify : Frequency, Frequency Tolerance, Temperature Stability, Operating Temperature & Load Capacitance In line with our ongoing policy of product evolvement and improvement, the above specification may be subject to change without notice ISO9001:2000 Registered For quotations or further information please contact us at: 3 The Business Centre, Molly Millars Lane, Wokingham, Berkshire, RG41 2EY, UK http://www.actcrystals.com 1 of 3 Issue 7 H2 Date:06-12-2012 Tel : Fax : email : 0044 (0)118 979 1238 0044 (0)118 979 1283 [email protected] ACT2016SMX-4 Series Tape Dimensions ( Units in mm ) * Standard: 3,000 piece reels A B C D E F G Ø 1.5 4.0 4.0 1.75 8.0 1.0 2.5 H I J K Ø Ø Ø Ø 13.5 21.6 60.0 180 L M 9.5 1.6 Reflow Information In line with our ongoing policy of product evolvement and improvement, the above specification may be subject to change without notice ISO9001:2000 Registered For quotations or further information please contact us at: 3 The Business Centre, Molly Millars Lane, Wokingham, Berkshire, RG41 2EY, UK http://www.actcrystals.com Issue 7 H2 Date:06-12-2012 2 of 3 SERIES : ACT2016SMX-4 Part numbering code is CX Example : CX 2400 (ACT2016SMX-4) (24.00MHz ) Frequency To 99.9999MHz four digits of Frequency 1st I K G KO F D (±30ppm) (±30ppm) (-20+70) (10pF) (Fund') (3K Reel ) Tolerance (±pm) @ 25ºC E 10 F 15 G 20 H 25 I 30 L 50 Operating Temperature Range (ºC) G -20+70 L M Load Capacitance ( pF or Series Resonance) -30+85 -40+85 GO JO KO MO OO Examples Stability Over Operating Temperature (ºC) 12.000MHz = 1200 59.9999MHz = 5999 F G I J K O NB: It is important to suffix the above part number with the full frequency required to give a completed part number as illustrated below 10 15 20 25 30 50 Full Example Part Number 24.00MHz (RoHS) Mode F RoHS Comp' - PF Fundamental 8 9 10 11 12 - PF Package L = Loose D =3K Reels Table 2 Tolerance CX2400IKGKOFD-PF (#) Stability 25°C -20~+70°C -30~+85°C -40~+85°C ±10ppm ±20ppm ` E ±30ppm E Commodity Code 854160 00 00 NOTES : Tighter aging may be available please enquire. Leave blank for standard aging. 1) Tighter Tolerances and Stabilities and other Operating Temperature Ranges may be available. As each of these specification parameters impact on each other, it is not always possible to combine all options in one device. Therefore, if a specification not catered for above is required, please contact us directly for the relevant part number code(s). 2) ACT are always happy to consider truly custom specification parts which may require non-standard specification parameters, specific testing, customer requested AQL requirements, non standard packaging or taping and reeling and custom marking. Such devices would normally be allocated a custom specification part number which is wholly customer specific. ( EG : A 24.00MHz custom ACT2016MX-4 device may have a part number such as CX2400C- C1133-PF) 3) A guide to availability of tighter stabilities appears in Table 2 of the data sheet ISO9001 Registered For quotations or further information please contact us at: 3 The Business Centre, Molly Millars Lane, Wokingham, Berkshire, RG41 2EY, United Kingdom http:www.actcrystals.com Issue 7 H2 Date:06-12-2012