Tel : +44 118 979 1238 Fax : +44 118 979 1283 Email: [email protected] The ACTR423 /423.22/TO39 is a true one-port, surface-acoustic-wave (SAW) resonator in a low-profile TO-39 case. It provides reliable, fundamental-mode, quartz frequency stabilization of fixed-frequency oscillators operating at approximately 423.220MHz. The NDR423 is designed for 433.920 MHz superhet receivers (with 10.7 MHz IF) in remote-control and wireless security applications operating in Europe under ETSI I-ETS 300 220 and in Germany under FTZ 17 TR 2100. 1.Package Dimension (TO-39) Pin Configuration 1 Input / Output 2 Output / Input 3 Case Ground Dimension Data (unit: mm) A 9.30±0.20 B 5.08±0.10 C 3.40±0.20 D 3±0.20⁄5±0.20 E 0.45±0.20 3.Equivalent LC Model and Test Circuit 4.Typical Application Circuits 1) Low-Power Transmitter Application 2) Local Oscillator Application In keeping with our ongoing policy of product evolvement and improvement, the above specification is subject to change without notice. ISO9001: 2000 Registered - Registration number 6830/2 For quotations or further information please contact us at: 3 The Business Centre, Molly Millars Lane, Wokingham, Berks, RG41 2EY, UK http://www.actcrystals.com 1 OF 3 Issue : 1 C1 Date : SEPT 04 Tel : +44 118 979 1238 Fax : +44 118 979 1283 Email: [email protected] 5.Typical Frequency Response 6.Temperature Characteristics 7.Performance 7-1.Maximum Ratings Rating CW RF Power Dissipation DC Voltage Between Any Two Pins Case Temperature Value Unit 0 dBm ±30V VDC -40 to +85 °C 7-2.Electronic Characteristics Characteristic Centre Frequency (+25°C) Sym Minimum Absolute Frequency fC 423.145 Tolerance from 423.220MHz ∆fC ±75 IL 1.3 Unloaded Q QU 12,325 50 Ω Loaded Q QL 1,700 Turnover Temperature T0 Turnover Frequency f0 fc kHz FTC 0.032 ppm/°C 2 |fA| ≤10 ppm/yr Insertion Loss Quality Factor Temperature Stability Frequency Temperature Coefficient Frequency Aging Absolute Value during the First Year DC Insulation Resistance Between Any Two Pins Motional Resistance RF Equivalent RLC Model 25 Typical 40 Maximum Unit 423.295 MHz kHz 1.8 dB 55 °C 1.0 MΩ 16 Motional Inductance LM 74.1961 µH Motional Capacitance CM 1.9080 fF Pin 1 to Pin 2 Static Capacitance C0 1.9 2.2 23 Ω RM 2.5 pF iCAUTION: Electrostatic Sensitive Device. Observe precautions for handling! In keeping with our ongoing policy of product evolvement and improvement, the above specification is subject to change without notice. ISO9001: 2000 Registered - Registration number 6830/2 For quotations or further information please contact us at: 3 The Business Centre, Molly Millars Lane, Wokingham, Berks, RG41 2EY, UK http://www.actcrystals.com 2 OF 3 Issue : 1 C1 Date : SEPT 04 Tel : +44 118 979 1238 Fax : +44 118 979 1283 Email: [email protected] 1. 2. 3. 4. 5. 6. 7. 8. 9. The centre frequency, f C, is measured at the minimum IL point with the resonator in the 50 Ω test system. Unless noted otherwise, case temperature T C = +25°C±2°C. Frequency aging is the change in f C with time and is specified at +65°C or less. Aging may exceed the specification for prolonged temperatures above +65°C. Typically, aging is greatest the first year after manufacture, decreasing in subsequent years. Turnover temperature, T0, is the temperature of maximum (or turnover) frequency, f 0. The nominal frequency at 2 any case temperature, TC, may be calculated from: f = f 0 [1 - FTC (T 0 - TC) ]. This equivalent RLC model approximates resonator performance near the resonant frequency and is provided for reference only. The capacitance C 0 is the measured static (non-motional) capacitance between Pin1 and Pin2. The measurement includes case parasitic capacitance. Derived mathematically from one or more of the following directly measured parameters: f C, IL, 3 dB bandwidth, fC versus TC, and C 0. The specifications of this device are based on the test circuit shown above and subject to change or obsolescence without notice. Typically, equipment utilizing this device requires emissions testing and government approval, which is the responsibility of the equipment manufacturer. Our liability is only assumed for the Surface Acoustic Wave (SAW) component(s) per se, not for applications, processes and circuits implemented within components or assemblies. In keeping with our ongoing policy of product evolvement and improvement, the above specification is subject to change without notice. ISO9001: 2000 Registered - Registration number 6830/2 For quotations or further information please contact us at: 3 The Business Centre, Molly Millars Lane, Wokingham, Berks, RG41 2EY, UK http://www.actcrystals.com 3 OF 3 Issue : 1 C1 Date : SEPT 04