ADC100 SERIES 1W, Miniature SIP, Single & Dual Output DC/DC Converters Selection Guide Model Number The ADC100 series is an excellent selection for a variety of applications including distributed power systems, mixed analog/digital subsystems, portable test equipments, local power networks and battery backed systems. Mechanical Dimensions 2.54 [0.100] 2.1 [0.08] 18.5 [0.73] 1 2 4 5 Pin 1 2 4 5 6 6 0.5 [0.020] Load Regulation % Max. 10 10 8 7 7 10 8 7 7 8 8 5 5 5 8 5 5 5 8 8 5 5 5 8 5 5 5 8 5 5 8 5 5 % Typ. 73 71 76 78 78 72 77 78 79 74 73 78 80 80 74 79 81 81 73 71 76 78 79 72 76 79 80 72 79 79 72 80 80 Singles +Vin -Vin -Vout No Pin +Vout Duals +Vin -Vin -Vout Common +Vout Case Size – 5V & 12V Input – 19.5x6.1x10.2mm (0.77x0.24x0.40inch) 15V & 24V Input –19.5x7.1x10.2mm (0.77x0.28x0.40inch) Case Material – Non-Conductive Black Plastic Weight – 5V & 12V Input – 2.2g (0.08Oz) 15V & 24V Input– 2.6g (0.09Oz) Tolerance Millimeters X.X±0.25 X.XX±0.13 Inches X.XX±0.01 X.XXX±0.005 Pin ±0.05 ±0.002 T= 6.1 (0.24) for 5V & 12V Input Models T= 7.1 (0.28) for 15V & 24V Input Models Efficiency Pin Connections 19.5 [0.77] T The series consists of 33 models with input voltages of 5V, 12V, 15V and 24VDC which offers standard output voltages of 3.3V, 5V, 9V, 12V, 15V, ±5V, ±9V, ±12V and ±15VDC for a wide choice. 15 (13.5 – 16.5) Output Current mA 260 200 110 84 67 ±100 ±56 ±42 ±34 260 200 110 84 67 ±100 ±56 ±42 ±34 260 200 110 84 67 ±100 ±56 ±42 ±34 200 84 67 ±100 ±42 ±34 10.2 [0.40] MPS Industries ADC100 1W DC/DC's are specially designed to provide the optimum cost/ benefit power solution in a miniature SIP package. 24 (21.6 – 26.4) 3.2 [0.13] • • • 12 (10.8 – 13.2) 1.3 [0.05] • Efficiency up to 81% 1000VDC Isolation MTBF > 2,000,000 Hours Low Cost Input 5, 12, 15 and 24VDC Output 3.3, 5, 9, 12, 15, ±5, ±9, ±12 and ±15VDC Temperature Performance -40°C to +85°C UL 94V-0 Package Material Internal SMD Construction Industry Standard Pinout 5 (4.5 – 5.5) 0.5 [0.02] • • • • • • ADC101 ADC102 ADC103 ADC104 ADC105 ADC106 ADC107 ADC108 ADC109 ADC111 ADC112 ADC113 ADC114 ADC115 ADC116 ADC117 ADC118 ADC119 ADC121 ADC122 ADC123 ADC124 ADC125 ADC126 ADC127 ADC128 ADC129 ADC151 ADC152 ADC153 ADC154 ADC155 ADC156 Output Voltage VDC 3.3 5 9 12 15 ±5 ±9 ±12 ±15 3.3 5 9 12 15 ±5 ±9 ±12 ±15 3.3 5 9 12 15 ±5 ±9 ±12 ±15 5 12 15 ±5 ±12 ±15 0.25 [0.010] Key Features Input Voltage VDC 2463 208th Street, Ste. 205 Tel: (310) 533-1455 http://www.mpsind.com Torrance, CA 90501 Fax: (310) 533-1853 E-mail: [email protected] ADC100 SERIES 1W, Miniature SIP, Single & Dual Output DC/DC Converters Absolute Maximum Ratings Parameter General Characteristics Min. Max. Units Parameter Isolation Voltage Isolation Resistance 5VDC Input Models -0.7 9 VDC 12VDC Input Models -0.7 18 VDC 15VDC Input Models -0.7 18 VDC Isolation Capacitance 24VDC Input Models -0.7 30 VDC Switching Frequency Lead Temperature (1.5mm from case for 10sec.) --- 260 °C Internal Power Dissipation --- 450 mW Input Surge Voltage (1000mS) MTBF Conditions Min. Typ. Max. Units 60 Seconds 1000 --- --- VDC 500VDC 1000 --- --- MΩ 100kHz, 1V --- 60 100 pF 70 100 120 kHz 2 --- --- MHrs Min. Typ. Max. Units --- ±1.2 ±1.5 % MIL-HDBK-217F @25°C Ground Benign Exceeding the unit absolute maximum ratings could cause damage. These are not continuous operating ratings. Environmental Characteristics Parameter Operating Temperature Operating Temperature Storage Temperature Humidity Output Characteristics Conditions Min. Ambient -40 85 °C Line Regulation Case -40 90 °C Load Regulation -40 125 °C Ripple & Noise --95 Free-Air Convection % Short Circuit Cooling Max. Units Parameter Conditions For Vin Change of 1% Io = 20% to 100% See Selection Guide 20MHz BW --- 50 75 % mV P-P 0.5 Second Max. Maximum Capacitive Load Models by Output Voltage (Each Output on Duals) Derating Curve 100LFM 400LFM 200LFM Output Power (%) 80 60 Natural convection 20 0 ¡ã -40 50 Duals Units 220 100 uF Notes: 100 40 Singles 60 70 80 Ambient Temperature 90 100 110 1. Specifications typical at Ta=+25°C, resistive load, nominal input voltage, rated output current unless otherwise noted. 2. These power converters require a minimum output load to maintain specified regulation. 3. Operation under no-load conditions will not damage these modules; however, they may not meet all specifications listed. 4. All DC/DC converters should be externally fused at the front end for protection. 5. Other input and output voltage may be available, please contact factory. 6. All specifications subject to change without notice. 7. For detailed data sheet, please visit our website. ] 2463 208th Street, Ste. 205 Tel: (310) 533-1455 http://www.mpsind.com Torrance, CA 90501 Fax: (310) 533-1853 E-mail: [email protected]