Frequency Mixer ADE-92MH+ Level 13 (LO Power +13 dBm) 400 to 900 MHz The Big Deal • Excellent IP3: +26dBm with reduced LO power (+13dBm) • High LO-RF Isolation across the entire band • Low cost, miniature size CASE STYLE: CD636 Product Overview The ADE-92MH+ is passive double balanced mixer featuring a FET quad in a ring configuration providing high dynamic range performance in a small, low cost, RoHS-compliant package. The ADE-92MH+ provides RF/LO response from 400 to 900 MHz and IF response from DC to 150 MHz. It is especially useful in systems where cost and performance are critical, such as GSM cellular system applications. This mixer is ideal for upconverter and downconverter applications and does not require external matching components or DC power. Key Features Feature Advantages High IP3, +26 dBm typ. with reduced LO Allows for improved dynamic range, a critical factor in receiver applications. power requirement. Low conversion loss, 7 dB typ. Enables lower NF front ends, which can improve system sensitivity. High LO to RF isolation, 40 dB typ. Reduced levels of unwanted responses that can interfere with system performance. Broadband matching The IF port VSWR is less than 1.6 to 1 over the specified frequency range, which simplifies impedance matching with adjoining components. Insensitive to LO power level variations Allows the use of an LO amplifier with less stringent gain flatness, enabling the use of lower cost amplifiers. Small package 0.310” x 0.220” x 0.162” Enables high density packaging. Mini-Circuits ® ISO 9001 ISO 14001 AS 9100 CERTIFIED P.O. Box 350166, Brooklyn, New York 11235-0003 (718) 934-4500 Fax (718) 332-4661 The Design Engineers Search Engine For detailed performance specs & shopping online see web site TM Provides ACTUAL Data Instantly at minicircuits.com IF/RF MICROWAVE COMPONENTS Notes: 1. Performance and quality attributes and conditions not expressly stated in this specification sheet are intended to be excluded and do not form a part of this specification sheet. 2. Electrical specifications and performance data contained herein are based on Mini-Circuit’s applicable established test performance criteria and measurement instructions. 3. The parts covered by this specification sheet are subject to Mini-Circuits standard limited warranty and terms and conditions (collectively, “Standard Terms”); Purchasers of this part are entitled to the rights and benefits contained therein. For a full statement of the Standard Terms and the exclusive rights and remedies thereunder, please visit Mini-Circuits’ website at www.minicircuits.com/MCLStore/terms.jsp. Page 1 of 3 High IP3 Frequency Mixer ADE-92MH+ Level 13 (LO Power +13 dBm) 400 to 900 MHz Maximum Ratings Features Operating Temperature -40°C to 85°C Storage Temperature -55°C to 100°C RF Power 100 mW IF Current 40 mA Permanent damage may occur if any of these limits are exceeded. Pin Connections LO 6 RF 3 IF 2 GROUND 1,4,5 F B E MAX Applications • cellular • GSM • ISM Electrical Specifications LO/RF 400-900 CONVERSION LOSS (dB) LO-RF ISOLATION (dB) LO-IF ISOLATION (dB) IF fL-fU A±.01 C + RoHS compliant in accordance with EU Directive (2002/95/EC) The +Suffix has been added in order to identify RoHS Compliance. See our web site for RoHS Compliance methodologies and qualifications. FREQUENCY (MHz) Outline Drawing CASE STYLE: CD636 PRICE: $ 5.95 ea. QTY. (10-49) • high IP3, +26 dBm typ. • good L-R isolation, 40 dB typ. • good L-I isolation, 26 dB typ. • aqueous washable • patent pending DC-150 IP3 at center band (dBm) X σ Max. Typ. Min. Typ. Min. Typ. 6.8 0.1 9.5 40 31 26 18 26 1 dB COMP.: +17 dBm typ. * Conversion Loss increases up to 10dB @ IF Frequency 120-150MHz. INDEX H TYP J REF. G TYP Typical Performance Data PCB Land Pattern Frequency (MHz) G TYP K TYP L RF D TYP Suggested Layout Tolerance to be within ±.002 Outline Dimensions ( inch mm ) A .272 6.91 B .310 7.87 C .220 5.58 D .100 2.54 H .030 0.76 J .026 0.66 K .065 1.65 L .300 7.62 E .162 4.11 F .055 1.40 G .100 2.54 wt grams .25 Demo Board MCL P/N: TB-03 Suggested PCB Layout (PL-052) LO Conversion Loss (dB) Isolation L-R (dB) Isolation L-I (dB) VSWR RF PORT (:1) VSWR LO PORT (:1) IP3 (dBm) LO +13dBm LO +13dBm LO +13dBm LO +13dBm LO +13dBm LO +13dBm 400.10 420.10 460.10 500.10 520.10 470.10 490.10 530.10 570.10 590.10 6.00 5.92 5.94 6.01 5.99 41.12 41.61 42.40 42.95 42.91 29.53 29.73 29.67 28.80 27.98 2.04 2.06 2.18 2.30 2.32 23.05 21.62 18.66 14.98 13.08 21.44 21.45 22.35 24.42 25.06 540.10 580.10 600.10 620.10 640.10 610.10 650.10 670.10 690.10 710.10 6.05 6.30 6.39 6.50 6.62 42.41 41.11 40.28 39.48 38.60 27.10 25.72 25.13 24.62 24.26 2.36 2.58 2.65 2.74 2.82 11.16 8.27 6.95 6.00 5.18 25.17 27.7 31.09 35.77 35.96 680.10 700.10 740.10 760.10 780.10 750.10 770.10 810.10 830.10 850.10 6.79 6.92 7.14 7.27 7.29 37.21 37.10 37.75 38.76 39.88 23.98 23.91 23.99 24.25 24.64 2.93 3.01 3.16 3.19 3.16 4.00 3.63 3.20 3.13 3.11 36.11 31.27 26.18 26.81 29.23 800.10 840.10 860.10 880.10 900.10 870.10 910.10 930.10 950.10 970.10 7.27 7.42 7.54 7.60 7.74 40.11 39.42 39.18 39.00 38.91 25.10 26.01 26.21 26.17 26.15 3.13 3.20 3.28 3.33 3.43 3.16 3.38 3.52 3.67 3.85 31.98 33.03 34.97 35.44 33.43 Electrical Schematic RF LO FET Quad Matching Network Matching Network IF NOTES: 1. TRACE WIDTH IS SHOWN FOR ROGERS RO4350B WITH DIELECTRIC THICKNESS .030"± .002"; COPPER: 1/2 OZ. EACH SIDE. FOR OTHER MATERIALS TRACE WIDTH MAY NEED TO BE MODIFIED. 2. BOTTOM SIDE OF THE PCB IS CONTINUOUS GROUND PLANE. DENOTES PCB COPPER LAYOUT WITH SMOBC (SOLDER MASK OVER BARE COPPER) DENOTES COPPER LAND PATTERN FREE OF SOLDER MASK Mini-Circuits ® ISO 9001 ISO 14001 AS 9100 CERTIFIED P.O. Box 350166, Brooklyn, New York 11235-0003 (718) 934-4500 Fax (718) 332-4661 The Design Engineers Search Engine For detailed performance specs & shopping online see web site TM Provides ACTUAL Data Instantly at minicircuits.com IF/RF MICROWAVE COMPONENTS Notes: 1. Performance and quality attributes and conditions not expressly stated in this specification sheet are intended to be excluded and do not form a part of this specification sheet. 2. Electrical specifications and performance data contained herein are based on Mini-Circuit’s applicable established test performance criteria and measurement instructions. 3. The parts covered by this specification sheet are subject to Mini-Circuits standard limited warranty and terms and conditions (collectively, “Standard Terms”); Purchasers of this part are entitled to the rights and benefits contained therein. For a full statement of the Standard Terms and the exclusive rights and remedies thereunder, please visit Mini-Circuits’ website at www.minicircuits.com/MCLStore/terms.jsp. REV. OR M121478 ADE-92MH+ EDR-9386/1F3 RAV 1000729 Page 2 of 3 ADE-92MH+ Performance Charts 8.2 ADE-92MH+ CONVERSION LOSS LO=+10dBm 7.0 6.6 6.2 500 600 700 RF FREQUENCY (MHz) 800 42 40 38 34 400 900 ADE-92MH+ L-I ISOLATION LO=+10dBm LO=+16dBm 4.0 3.6 28 26 2.4 2.0 800 ADE-92MH+ LO VSWR LO=+10dBm LO=+10dBm 1.6 400 900 500 LO=+16dBm 1.6 20 1.5 VSWR 24 12 LO=+16dBm 800 900 ADE-92MH+ IF VSWR LO=+10dBm 1.7 16 LO=+13dBm 600 700 RF FREQUENCY (MHz) 1.8 LO=+13dBm 900 2.8 22 600 700 LO FREQUENCY (MHz) 800 3.2 24 32 600 700 LO FREQUENCY (MHz) ADE-92MH+ RF VSWR 4.4 30 500 500 4.8 LO=+13dBm VSWR ISOLATION (dB) 44 32 LO=+13dBm LO=+16dBm 1.4 1.3 8 1.2 4 1.1 0 400 LO=+16dBm 36 36 28 LO=+13dBm 46 5.8 20 400 LO=+10dBm 48 7.4 34 ADE-92MH+ L-R ISOLATION 50 LO=+16dBm 7.8 5.4 400 1.0 500 600 700 LO FREQUENCY (MHz) 800 0 900 45 30 60 90 IF FREQUENCY (MHz) 120 150 ADE-92LH+ IP3 50 LO=+10dBm LO=+13dBm LO=+16dBm 40 IP3 (dBm) VSWR LO=+13dBm ISOLATION (dB) CONVERSION LOSS (dB) 8.6 at IF freq of 70MHz 35 30 25 20 15 10 400 500 600 700 RF FREQUENCY (MHz) 800 900 Mini-Circuits ® ISO 9001 ISO 14001 AS 9100 CERTIFIED P.O. Box 350166, Brooklyn, New York 11235-0003 (718) 934-4500 Fax (718) 332-4661 The Design Engineers Search Engine For detailed performance specs & shopping online see web site TM Provides ACTUAL Data Instantly at minicircuits.com IF/RF MICROWAVE COMPONENTS Notes: 1. Performance and quality attributes and conditions not expressly stated in this specification sheet are intended to be excluded and do not form a part of this specification sheet. 2. Electrical specifications and performance data contained herein are based on Mini-Circuit’s applicable established test performance criteria and measurement instructions. 3. The parts covered by this specification sheet are subject to Mini-Circuits standard limited warranty and terms and conditions (collectively, “Standard Terms”); Purchasers of this part are entitled to the rights and benefits contained therein. For a full statement of the Standard Terms and the exclusive rights and remedies thereunder, please visit Mini-Circuits’ website at www.minicircuits.com/MCLStore/terms.jsp. Page 3 of 3