AIZ Series Passive 10-Tap DIP/SMD Delay Modules Operating Specifications - Passive Delay Lines Low Profile 14-Pin Package Two Surface Mount Versions Pulse Overshoot (Pos) .................................... 5% to 10%, typical Pulse Distortion (S) ....................................................... 3% typical Working Voltage ............................................... 25 VDC maximum Dielectric Strength ............................................ 100VDC minimum Insulation Resistance ......................... 1,000 MΩ min. @ 100VDC Temperature Coefficient .................................. 70 ppm/OC, typical Bandwidth (fC) ......................................................... 0.35/tr approx. Operating Temperature Range ............................. -55O to +125OC Storage Temperature Range ................................. -65O to +150OC Low Distortion LC Network 10 Equal Delay Taps, Variety of Footprints Fast Rise Time -- BW 0.35 / tr Standard Impedances: 50 - 75 - 100 - 200 Ω Stable Delay vs. Temperature: 100 ppm/OC Operating Temperature Range -55OC to +125OC Electrical Specifications at 25OC Delay Tolerances Total (ns) Tap-to-Tap (ns) 5.0 ± 0.5 7.5 ± 0.5 10 ± 1.0 15 ± 1.0 20 ± 1.0 25 ± 1.25 30 ± 1.5 35 ± 1.75 40 ± 2.0 50 ± 2.5 60 ± 3.0 75 ± 3.75 80 ± 4.0 100 ± 5.0 120 ± 6.0 125 ± 6.25 150 ± 7.5 0.5 ± 0.2 0.75 ± 0.3 1.0 ± 0.4 1.5 ± 0.5 2.0 ± 0.5 2.5 ± 0.5 3.0 ± 0.6 3.5 ± 1.0 4.0 ± 1.0 5.0 ± 1.0 6.0 ± 1.5 7.5 ± 1.5 8.0 ± 1.8 10.0 ± 2.0 12.0 ± 2.5 12.5 ± 2.5 15.0 ± 3.0 1, 2, 3 Note: For SMD Package add "G" of "J" as below to P/N in Table 50 Ohm Part Number Rise Time (ns) DCR max. (Ohms) 75 Ohm Part Number Rise Time (ns) DCR max. (Ohms) 100 Ohm Part Number Rise Time (ns) DCR max. (Ohms) 200 Ohm Part Number Rise Time (ns) DCR max. (Ohms) AIZ-55 AIZ-7P55 AIZ-105 AIZ-155 AIZ-205 AIZ-255 AIZ-305 AIZ-355 AIZ-405 AIZ-505 AIZ-605 AIZ-755 AIZ-805 AIZ-1005 AIZ-1205 AIZ-1255 AIZ-1505 1.5 1.8 2.0 3.0 4.0 5.0 6.0 7.0 8.0 10.0 12.0 15.0 16.0 20.0 24.0 25.0 30.0 0.8 0.8 .80 1.0 1.2 1.3 1.4 1.5 1.6 1.8 2.0 2.9 3.0 3.4 3.7 3.9 4.8 AIZ-57 AIZ-7P57 AIZ-107 AIZ-157 AIZ-207 AIZ-257 AIZ-307 AIZ-357 AIZ-407 AIZ-507 AIZ-607 AIZ-757 AIZ-807 AIZ-1007 AIZ-1207 AIZ-1257 AIZ-1507 1.5 1.8 2.0 3.0 4.0 5.0 6.0 7.0 8.0 10.0 12.0 15.0 16.0 20.0 24.0 25.0 30.0 0.8 1.1 1.1 1.3 1.5 1.6 1.9 2.6 2.9 3.2 3.5 4.5 4.8 4.9 5.5 5.6 6.3 AIZ-51 AIZ-7P51 AIZ-101 AIZ-151 AIZ-201 AIZ-251 AIZ-301 AIZ-351 AIZ-401 AIZ-501 AIZ-601 AIZ-751 AIZ-801 AIZ-1001 AIZ-1201 AIZ-1251 AIZ-1501 1.5 1.8 2.0 3.0 4.0 5.0 6.0 7.0 8.0 10.0 12.0 15.0 16.0 20.0 24.0 25.0 30.0 0.8 0.8 1.2 1.4 1.6 1.8 2.0 2.9 3.1 3.5 3.8 4.8 5.0 5.6 6.0 6.3 6.8 AIZ-52 AIZ-7P52 AIZ-102 AIZ-152 AIZ-202 AIZ-252 AIZ-302 AIZ-352 AIZ-402 AIZ-502 AIZ-602 AIZ-752 AIZ-802 AIZ-1002 AIZ-1202 AIZ-1252 AIZ-1502 1.5 1.8 2.0 3.0 4.0 5.0 6.0 7.0 8.0 10.0 12.0 15.0 16.0 20.0 25.0 26.0 32.0 0.8 0.8 1.7 1.9 2.4 3.4 3.7 4.0 4.3 5.6 6.1 6.8 7.0 8.0 12.0 12.3 13.5 1. Rise Times are measured from 10% to 90% points. 2. Delay Times measured at 50% point of leading edge. 3. Output (100% Tap) terminated to ground through RL=ZO OPTIONAL SCHEMATICS: As below, with similar electricals per table these passive delays are available in range of schematic styles (Contact factory for others not shown). AIZ Style Schematic Most Popular Footprint COM 10% 14 13 30% 50% 70% 12 11 10 1 2 3 4 5 IN N/C 20% 40% 60% 90% COM 9 8 6 7 80% 100% AIY Style Schematic AIU Style Schematic Per table above, substitute AIY for AIZ in P/N Per table above, substitute AIU for AIZ in P/N N/C 14 100% 90% 13 12 80% 70% 60% 50% COM 11 10 9 8 14 Rhombus Industries Inc. 13 12 80% 70% 60% 50% 11 10 9 8 1 2 3 4 5 6 7 1 2 3 4 5 6 7 COM IN 10% 20% 30% 40% COM COM IN 10% 20% 30% 40% 50% 14-PIN PACKAGE OPTIONS: See Drawings on Page 2. Available as Thru-hole (default) or SMD versions. Gull wing SMD add "G" to end of P/N per table. J-Bend SMD add "J" to end of P/N per table. Specifications subject to change without notice. 100% 90% DIP For other values & Custom Designs, contact factory. Page 1 of 2 G-SMD Add "G" J-SMD Add "J" AIZ 9901 15801 Chemical Lane, Huntington Beach, CA 92649-1595 Phone: (714) 898-0960 • FAX: (714) 896-0971 www.rhombus-ind.com • email: [email protected] 14-Pin Low Profile DIP/SMD Package Dimensions in Inches (mm) Example P/N: .205 .020 (5.21) (0.51) MAX. AIZ-101 AIY-205 AIU-1507 .050 (1.27) TYP. .365 (9.27) MAX. .100 (2.54) TYP. .285 (7.24) MAX. G-SMD AIZ-101G AIY-205G AIU-1507G G-SMD .205 (5.21) MAX. .050 (1.27) TYP. .020 (0.51) TYP. .015 (0.38) TYP. .100 (2.54) TYP. .430 (10.92) .400 (10.16) .285 (7.24) MAX. .215 (5.46) MAX. J-SMD AIZ-101J AIY-205J AIU-1507J .050 (1.27) TYP. .020 (0.51) TYP. .008 R (0.20) .010 (0.25) TYP. .030 (0.76) TYP. .785 (19.94) MAX. 14-Pin J-Bend SMD. To Specify J-SMD, add "J" to end of P/N per Table on Page 1. .010 (0.25) TYP. .300 (7.62) .785 (19.94) MAX. 14-Pin Gull wing SMD. To Specify G-SMD, add "G" to end of P/N per Table on Page 1. Example P/N: .008 R (0.20) .120 (3.05) MIN. .020 (0.51) TYP. Example P/N: .285 (7.24) MAX. .785 (19.94) MAX. 14-Pin DIP, "Thru-hole" is Default package style per Table on Page 1. J-SMD .100 (2.54) TYP. .020 R (0.51) .285 (7.24) .260 (6.60) .030 (0.76) TYP. .330 (8.38) MAX. OPTIONAL SCHEMATICS: As below, with similar electricals per table these passive delays are available in range of schematic styles (Contact factory for other 14-Pin Schematic Styles not shown). AIZ Style Schematic Most Popular Footprint COM 10% 30% 50% 70% 14 13 12 11 10 9 8 1 2 3 4 5 6 7 20% 40% IN N/C 60% 90% COM 80% 100% Specifications subject to change without notice. Rhombus Industries Inc. AIY Style Schematic AIU Style Schematic Per table above, substitute AIY for AIZ in P/N Per table above, substitute AIU for AIZ in P/N N/C 14 100% 90% 13 12 80% 70% 60% 50% COM 11 10 9 8 14 100% 90% 13 12 80% 70% 60% 50% 11 10 9 8 1 2 3 4 5 6 7 1 2 3 4 5 6 7 COM IN 10% 20% 30% 40% COM COM IN 10% 20% 30% 40% 50% For other values & Custom Designs, contact factory. Page 2 of 2 AIZ 9901 15801 Chemical Lane, Huntington Beach, CA 92649-1595 Phone: (714) 898-0960 • FAX: (714) 896-0971 www.rhombus-ind.com • email: [email protected]