Series AM1DS-NZ 1 Watt | DC-DC Converter FEATURES: • • • • Models Single output Model AM1DS-0303S-NZ AM1DS-0305S-NZ AM1DS-0505S-NZ AM1DS-0509S-NZ AM1DS-0512S-NZ AM1DS-0515S-NZ AM1DS-0524S-NZ AM1DS-1205S-NZ AM1DS-1209S-NZ AM1DS-1212S-NZ AM1DS-1215S-NZ AM1DS-1515S-NZ AM1DS-2403S-NZ AM1DS-2405S-NZ AM1DS-2412S-NZ AM1DS-2415S-NZ AM1DS-0305SH30-NZ AM1DS-0505SH30-NZ AM1DS-0512SH30-NZ AM1DS-0515SH30-NZ AM1DS-0524SH30-NZ AM1DS-1205SH30-NZ AM1DS-1212SH30-NZ AM1DS-2405SH30-NZ Models Dual output Model AM1DS-0505D-NZ AM1DS-0509D-NZ AM1DS-0512D-NZ AM1DS-0515D-NZ AM1DS-0524D-NZ AM1DS-1205D-NZ AM1DS-1212D-NZ AM1DS-1215D-NZ AM1DS-2405D-NZ AM1DS-2412D-NZ AM1DS-2415D-NZ AM1DS-0505DH30-NZ AM1DS-0512DH30-NZ AM1DS-0515DH30-NZ AM1DS-1212DH30-NZ www.aimtec.com F 051e R12.B RoHS compliant High efficiency up to 76% Low profile plastic package 7 pin SIP package Input Voltage (V) Output Voltage (V) 3.0-3.6 4.5-5.5 4.5-5.5 4.5-5.5 4.5-5.5 10.8-13.2 10.8-13.2 21.6-26.4 5 5 12 15 24 5 12 5 Input Voltage (V) Output Voltage (V) 4.5-5.5 4.5-5.5 4.5-5.5 10.8-13.2 ±5 ±12 ±15 ±12 3.0-3.6 3.0-3.6 4.5-5.5 4.5-5.5 4.5-5.5 4.5-5.5 4.5-5.5 10.8-13.2 10.8-13.2 10.8-13.2 10.8-13.2 13.5-16.5 21.6-26.4 21.6-26.4 21.6-26.4 21.6-26.4 4.5-5.5 4.5-5.5 4.5-5.5 4.5-5.5 4.5-5.5 10.8-13.2 10.8-13.2 10.8-13.2 21.6-26.4 21.6-26.4 21.6-26.4 3.3 5 5 9 12 15 24 5 9 12 15 15 3.3 5 12 15 ±5 ±9 ±12 ±15 ±24 ±5 ±12 ±15 ±5 ±12 ±15 • • • • ° Output Current max (mA) 303 200 200 112 83 67 42 200 112 83 67 67 303 200 83 67 200 200 83 67 42 200 83 200 Output Current max (Ma) ±100 ±56 ±42 ±34 ±21 ±100 ±42 ±34 ±100 ±42 ±34 ±100 ±42 ±34 ±42 Tel: +1 514 620 2722 1 of 3 ° Operating temperature -40 C to + 85 C Continuous short circuit protection Pin compatible with multiple manufacturers Up to 3000VDC Isolation Isolation (VDC) Efficiency (%) 3000 3000 3000 3000 3000 3000 3000 3000 70 73 75 75 76 73 75 70 Isolation (VDC) Efficiency (%) 3000 3000 3000 3000 69 74 74 76 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 68 70 73 73 75 75 76 73 72 75 76 75 70 70 75 76 69 73 74 74 76 70 76 76 68 76 76 Toll free: + 1 888 9 AIMTEC (924 6832) North America only Series AM1DS-NZ 1 Watt | DC-DC Converter Models Dual output (continued) Model Input Voltage (V) Output Voltage (V) AM1DS-1215DH30-NZ AM1DS-2405DH30-NZ AM1DS-2412DH30-NZ 10.8-13.2 21.6-26.4 21.6-26.4 ±15 ±5 ±12 Output Current max (Ma) ±34 ±100 ±42 Isolation (VDC) Efficiency (%) 3000 3000 3000 76 70 76 NOTE: All specifications in this datasheet are measured at an ambient temperature of 25°C, humidity<75%, nominal input voltage and at rated output load unless otherwise specified. Input Specifications Parameters Voltage range Filter Start up time Absolute Maximum Rating Peak Input Voltage time No Load Input Current Isolation Specifications Parameters Tested I/O voltage Resistance Capacitance Output Specifications Parameters Voltage accuracy Short Circuit protection Short circuit restart Line voltage regulation Load voltage regulation Temperature coefficient Ripple & Noise Minimum Load Current General Specifications Parameters Switching frequency Operating temperature Storage temperature Maximum case temperature Derating Cooling Humidity Case material Weight www.aimtec.com F 051e R12.B Nominal Typical 3.3 5 12 15 24 Maximum 3.0-3.6 4.5-5.5 10.8-13.2 13.5-16.5 21.6-26.4 Capacitor Units VDC 3.3 5 12 15 24 ms 7 9 18 21 30 1 50 Conditions Typical 60 sec Rated Typical 20MHz Bandwidth Conditions 100% load Typical 100 -40 to +85 -55 to +125 Not-Required Free air convection 2 of 3 VDC MOhm pF Units % % of Vin % o %/ C mV p-p % of Max Maximum 100 95 Non-conductive black plastic (UL94V-0 rated) 2.3 Tel: +1 514 620 2722 Units Maximum ±5 Continuous Auto recovery ±1.5 20% ±0.03 200 10 For 1.0% change of Vin load 10~100% s mA 1000, 3000 > 1000 15 Conditions VDC Units KHz o C o C o C o %/ C % RH g Toll free: + 1 888 9 AIMTEC (924 6832) North America only Series AM1DS-NZ 1 Watt | DC-DC Converter General Specifications (continued) Parameters Dimensions (L x W x H) MTBF Maximum soldering temperature Conditions Pin Out Specifications Pin 1000 VDC Single + V Input - V Input - V Output No pin + V Output No pin 1 2 4 5 6 7 Dimensions Dual + V Input - V Input - V Output Common + V Output No pin 6.00 (0.24) Maximum Units o C 3000VDC Single + V Input - V Input No pin - V Output No pin + V Output Dual + V Input - V Input No pin - V Output Common + V Output 19.50 (0.76) 6.00 (0.24) PRINTED FACE 9.50 (0.37) 0.50 (0.02) Typical 0.77 x 0.24 x 0.37 inches 19.5 x 6.00 x 9.35 mm o >1 940 000 hrs (MIL-HDBK -217F, Ground Benign, t=+25 C) 1.5 mm from case for 10sec 300 9.50 (0.37) 2.54 (0.10) 4.10 (0.16) 15.20 (0.60) 0.50 (0.02) 0.50 (0.02) NOTE: Unit:mm [inch] Pin tolerances: 0.10mm [ 0.004inch] General tolerances: 0.25mm [ 0.010inch] 0.25 (0.01) 1.25 (0.05) NOTE: 1. Datasheets are updated as needed and as such, specifications are subject to change without notice. Once printed or downloaded, datasheets are no longer controlled by Aimtec; refer to www.aimtec.com for the most current product specifications. 2. Product labels shown, including safety agency certifications on labels, may vary based on the date manufactured. 3. Mechanical drawings and specifications are for reference only. 4. All specifications are measured at an ambient temperature of 25°C, humidity<75%, nominal input voltage and at rated output load unless otherwise specified. 5. Aimtec may not have conducted destructive testing or chemical analysis on all internal components and chemicals at the time of publishing this document. CAS numbers and other limited information are considered proprietary and may not be available for release. 6. This product is not designed for use in critical life support systems, equipment used in hazardous environments, nuclear control systems or other such applications which necessitate specific safety and regulatory standards other the ones listed in this datasheet. 7. Warranty is in accordance with Aimtec’s standard Terms of Sale available at www.aimtec.com. www.aimtec.com F 051e R12.B Tel: +1 514 620 2722 3 of 3 Toll free: + 1 888 9 AIMTEC (924 6832) North America only