Am29BL802C Known Good Die Data Sheet -XO\ 7KHIROORZLQJGRFXPHQWVSHFLILHV6SDQVLRQPHPRU\SURGXFWVWKDWDUHQRZRIIHUHGE\ERWK$GYDQFHG 0LFUR'HYLFHVDQG)XMLWVX$OWKRXJKWKHGRFXPHQWLVPDUNHGZLWKWKHQDPHRIWKHFRPSDQ\WKDWRULJ LQDOO\ GHYHORSHG WKHVSHFLILFDWLRQ WKHVH SURGXFWV ZLOO EHRIIHUHG WR FXVWRPHUVRIERWK $0' DQG )XMLWVX Continuity of Specifications 7KHUHLVQRFKDQJHWRWKLVGDWDVKHHWDVDUHVXOWRIRIIHULQJWKHGHYLFHDVD6SDQVLRQSURGXFW$Q\ FKDQJHVWKDWKDYHEHHQPDGHDUHWKHUHVXOWRIQRUPDOGDWDVKHHWLPSURYHPHQWDQGDUHQRWHGLQWKH GRFXPHQWUHYLVLRQVXPPDU\ZKHUHVXSSRUWHG)XWXUHURXWLQHUHYLVLRQVZLOORFFXUZKHQDSSURSULDWH DQGFKDQJHVZLOOEHQRWHGLQDUHYLVLRQVXPPDU\ Continuity of Ordering Part Numbers $0'DQG)XMLWVXFRQWLQXHWRVXSSRUWH[LVWLQJSDUWQXPEHUVEHJLQQLQJZLWK$PDQG0%07RRUGHU WKHVHSURGXFWVSOHDVHXVHRQO\WKH2UGHULQJ3DUW1XPEHUVOLVWHGLQWKLVGRFXPHQW For More Information 3OHDVH FRQWDFW \RXU ORFDO $0' RU )XMLWVX VDOHV RIILFH IRU DGGLWLRQDO LQIRUPDWLRQ DERXW 6SDQVLRQ PHPRU\VROXWLRQV 3XEOLFDWLRQ1XPEHU 5HYLVLRQ $ $PHQGPHQW ,VVXH'DWH 6HSWHPEHU SUPPLEMENT Am29BL802C Known Good Die 8 Megabit (512 K x 16-Bit) CMOS 3.0 Volt-only, Burst-mode, Boot Sector Flash Memory—Die Revision 1 DISTINCTIVE CHARACTERISTICS ■ 32 words sequential with wrap around (linear 32), bottom boot ■ Minimum 100,000 erase cycle guarantee per sector ■ One 8 Kword, two 4 Kword, one 48 Kword, three 64 Kword, and two 128 Kword sectors ■ 20-year data retention at 125°C ■ Single power supply operation — Regulated voltage range: 3.0 to 3.6 volt read and write operations and for compatibility with high performance 3.3 volt microprocessors ■ Read access times 22 ns burst access at extended temperature range 80 ns initial/random access ■ Alterable burst length via BAA# pin ■ Power dissipation (typical) — Burst Mode Read: 15 mA @ 25 MHz, 20 mA @ 33 MHz, 25 mA @ 40 MHz — Program/Erase: 20 mA — Standby mode, CMOS: 22 µA ■ 5 V-tolerant data, address, and control signals ■ Sector Protection — Implemented using in-system or via programming equipment — Temporary Sector Unprotect feature allows code changes in previously locked sectors ■ Unlock Bypass Program Command — Reduces overall programming time when issuing multiple program command sequences ■ Embedded Algorithms ■ Compatibility with JEDEC standards — Pinout and software compatible with singlepower supply Flash — Superior inadvertent write protection — Backward-compatible with AMD Am29LV and Am29F flash memories: powers up in asynchronous mode for system boot, but can immediately be placed into burst mode ■ Data# Polling and toggle bits — Provides a software method of detecting program or erase operation completion ■ Ready/Busy# pin (RY/BY#) — Provides a hardware method of detecting program or erase cycle completion ■ Erase Suspend/Erase Resume — Suspends an erase operation to read data from, or program data to, a sector that is not being erased, then resumes the erase operation ■ Hardware reset pin (RESET#) — Hardware method to reset the device for reading array data ■ Tested to datasheet specifications at temperature ■ Quality and reliability levels equivalent to standard packaged components — Embedded Erase algorithm automatically preprograms and erases the entire chip or any combination of designated sectors — Embedded Program algorithm automatically writes and verifies data at specified addresses Publication# 23694 Rev: A Amendment/+2 Issue Date: September 13, 2002 S U P P L E M E N T GENERAL DESCRIPTION The Am29BL802C in Known Good Die (KGD) form is an 8 Mbit, 3.0 volt-only Flash memory. AMD defines KGD as standard product in die form, tested for functionality and speed. AMD KGD products have the same reliability and quality as AMD products in packaged form. Am29BL802C Features The Am29BL802C is an 8 Mbit, 3.0 Volt-only burst mode Flash memory devices organized as 524, 288 words. These devices are designed to be programmed in-system with the standard system 3.0-volt V CC supply. A 12.0-volt VPP or 5.0 VCC is not required for program or erase operations. The device can also be programmed in standard EPROM programmers. The device offers an access time of 80 ns, allowing high speed microprocessors to operate without wait states. To eliminate bus contention the device has separate chip enable (CE#), write enable (WE#) and output enable (OE#) controls. Burst Mode Features The Am29BL802C offers a Linear Burst mode—a 32 word sequential burst with wrap around—in a bottom boot configuration only. This devices require additional control pins for burst operations: Load Burst Address (LBA#), Burst Address Advance (BAA#), and Clock (CLK). This implementation allows easy interface with minimal glue logic to a wide range of microprocessors/microcontrollers for high performance read operations. AMD Flash Memory Features Each device requires only a single 3.0 volt power supply for both read and write functions. Internally generated and regulated voltages are provided for the program and erase operations. The I/O and control signals are 5V tolerant. The Am29BL802C is entirely command set compatible with the JEDEC single-power-supply Flash standard. Commands are written to the command register using standard microprocessor write timings. Register contents serve as input to an internal state-machine that controls the erase and programming circuitry. Write cycles also internally latch addresses and data needed for the programming and erase operations. Reading data out of the device is similar to reading from other Flash or EPROM devices. Device erasure occurs by executing the erase command sequence. This initiates the Embedded Erase algorithm—an internal algorithm that automatically pre- 2 programs the array (if it is not already programmed) before executing the erase operation. During erase, the device automatically times the erase pulse widths and verifies proper cell margin. The host system can detect whether a program or erase operation is complete by observing the RY/BY# pin, or by reading the DQ7 (Data# Polling) and DQ6 (toggle) status bits. After a program or erase cycle has been completed, the device is ready to read array data or accept another command. The sector erase architecture allows memory sectors to be erased and reprogrammed without affecting the data contents of other sectors. The device is fully erased when shipped from the factory. Hardware data protection measures include a low VCC detector that automatically inhibits write operations during power transitions. The hardware sector protection feature disables both program and erase operations in any combination of the sectors of memory. This can be achieved in-system or via programming equipment. The Erase Suspend/Erase Resume feature enables the user to put erase on hold for any period of time to read data from, or program data to, any sector that is not selected for erasure. True background erase can thus be achieved. The hardware RESET# pin terminates any operation in progress and resets the internal state machine to reading array data. The RESET# pin may be tied to the system reset circuitry. A system reset would thus also reset the device, enabling the system microprocessor to read the boot-up firmware from the Flash memory. The device offers two power-saving features. When addresses have been stable for a specified amount of time, the device enters the automatic sleep mode. The system can also place the device into the standby mode. Power consumption is greatly reduced in both these modes. AMD’s Flash technology combines years of Flash memory manufacturing experience to produce the highest levels of quality, reliability and cost effectiveness. The device electrically erases all bits within a sector simultaneously via Fowler-Nordheim tunneling. The data is programmed using hot electron injection. Electrical Specifications Refer to the Am29BL802C data sheet, publication number 22371, for full electrical specifications on the Am29BL802C in KGD form. Am29BL802C Known Good Die S U P P L E M E N T PRODUCT SELECTOR GUIDE Family Part Number Speed (ns) Am29BL802C Regulated Voltage Range: VCC =3.0–3.6 V 80R Max access time, ns (tACC, tIACC) 80 Max CE# access time, ns (tCE) 80 Max OE# access time, ns (tOE) 22 (at 30 pF loading) Am29BL802C Known Good Die 3 S U P P L E M E N T AC CHARACTERISTICS Burst Mode Read Speed Options and Temperature Ranges Parameter JEDEC Std. Description 80R Unit Max 80 ns Max 24 ns Initial Access Time tIACC tBACC LBA# Valid Clock to Output Delay (See Note) Burst Access Time BAA# Valid Clock to Output Delay tLBAS LBA# Setup Time Min 6 ns tLBAH LBA# Hold Time Min 2 ns tBAAS BAA# Setup Time Min 6 ns tBAAH BAA# Hold Time Min 2 ns tBDH Data Hold Time from Next Clock Cycle Max 4 ns tACS Address Setup Time to CLK (See Note) Min 6 ns tACH Address Hold Time from CLK (See Note) Min 2 ns tOE Output Enable to Output Valid Max 24 ns tOEZ Output Enable to Output High Z Max 25 ns tCEZ Chip Enable to Output High Z Min 25 ns tCES CE# Setup Time to Clock Min 6 ns Note: Initial valid data will be output after second clock rising edge of LBA# assertion. 4 Am29BL802C Known Good Die S U P P L E M E N T AC CHARACTERISTICS Erase/Program Operations Parameter Speed Options JEDEC Std Description 80R Unit tAVAV tWC Write Cycle Time (Note 1) Min 80 ns tAVWL tAS Address Setup Time Min tWLAX tAH Address Hold Time Min 45 ns tDVWH tDS Data Setup Time Min 35 ns tWHDX tDH Data Hold Time Min 0 ns tOES Output Enable Setup Time Min 0 ns Read Recovery Time Before Write (OE# High to WE# Low) Min 0 ns ns tGHWL tGHWL tELWL tCS CE# Setup Time Min 0 ns tWHEH tCH CE# Hold Time Min 0 ns tWLWH tWP Write Pulse Width Min 35 ns tWHWL tWPH Write Pulse Width High Min 30 ns tWHWH1 tWHWH1 Programming Operation (Note 2) Typ 9 µs tWHWH2 tWHWH2 Sector Erase Operation (Note 2) Typ 3 sec tVCS VCC Setup Time (Note 1) Min 50 µs tRB Recovery Time from RY/BY# Min 0 ns Program/Erase Valid to RY/BY# Delay Min 90 ns tBUSY Notes: 1. Not 100% tested. Am29BL802C Known Good Die 5 S U P P L E M E N T AC CHARACTERISTICS Alternate CE# Controlled Erase/Program Operations Parameter Speed Options JEDEC Std Description tAVAV tWC Write Cycle Time (Note 1) Min tAVEL tAS Address Setup Time Min tELAX tAH Address Hold Time Min 45 ns tDVEH tDS Data Setup Time Min 35 ns tEHDX tDH Data Hold Time Min 0 ns tOES Output Enable Setup Time Min 0 ns tGHEL tGHEL Read Recovery Time Before Write (OE# High to WE# Low) Min 0 ns tWLEL tWS WE# Setup Time Min 0 ns tEHWH tWH WE# Hold Time Min 0 ns tELEH tCP CE# Pulse Width Min 35 ns tEHEL tCPH CE# Pulse Width High Min 30 ns tWHWsH1 tWHWH1 Programming Operation (Note 2) Typ 9 µs tWHWH2 tWHWH2 Sector Erase Operation (Note 2) Typ 3 sec Notes: 1. Not 100% tested. 2. See the “Erase and Programming Performance” section for more information. 6 Am29BL802C Known Good Die 80R Unit 80 ns ns S U P P L E M E N T DIE PHOTOGRAPH DIE PAD LOCATIONS 14 13 12 11 10 9 8 7 6 5 4 3 2 1 51 50 49 48 47 46 45 44 43 42 41 40 AMD logo location 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 Am29BL802C Known Good Die 7 S U P P L E M E N T PAD DESCRIPTION Pads relative to die center. Pad Signal Pad Center (mils) X Y Pad Center (millimeters) X Y Pad Signal Pad Center (mils) X Y Pad Center (millimeters) X Y 1 WE# –3.11 98.18 –0.0790 2.4938 26 CLK –24.43 –94.14 –0.6205 2 RESET# –13.41 98.18 –0.3406 2.4938 27 BAA# –14.38 –94.14 –0.3653 –2.3912 3 RY/BY# –23.34 98.18 –0.5929 2.4938 28 IND# 25.76 –94.14 0.6543 –2.3912 4 A18 –33.39 98.18 –0.8482 2.4938 29 VCC 42.04 –94.14 1.0678 –2.3912 5 A17 –43.44 98.18 –1.1034 2.4938 30 VCC 50.19 –94.14 1.2749 –2.3912 6 A7 –53.49 98.18 –1.3587 2.4938 31 DQ4 57.06 –94.14 1.4493 –2.3912 7 A6 –63.54 98.18 –1.6140 2.4938 32 DQ12 66.70 –94.14 1.6942 –2.3912 8 A5 –73.59 98.18 –1.8692 2.4938 33 DQ5 75.27 –94.14 1.9118 –2.3912 9 A4 –83.64 98.18 –2.1245 2.4938 34 DQ13 84.91 –94.14 2.1567 –2.3912 10 A3 –93.69 98.18 –2.3798 2.4938 35 DQ6 93.47 –94.14 2.3742 –2.3912 11 A2 –102.32 98.18 –2.5988 2.4938 36 DQ14 103.12 –94.14 2.6192 –2.3912 12 A1 –110.94 98.18 –2.8179 2.4938 37 DQ7 111.68 –94.14 2.8367 –2.3912 13 A0 –119.57 98.18 –3.0370 2.4938 38 DQ15 121.32 –94.14 3.0816 –2.3912 14 CE# –128.19 98.18 –3.2560 2.4938 39 VSS 128.19 –94.14 3.2560 –2.3912 15 VSS –128.19 –94.14 –3.2560 –2.3912 40 NC 128.19 98.18 3.2560 2.4938 16 OE# –114.94 –94.14 –2.9194 –2.3912 41 A16 119.57 98.18 3.0370 2.4938 17 DQ0 –106.36 –94.14 –2.7015 –2.3912 42 A15 110.94 98.18 2.8179 2.4938 18 DQ8 –96.72 –94.14 –2.4566 –2.3912 43 A14 102.32 98.18 2.5988 2.4938 19 DQ1 –88.15 –94.14 –2.2391 –2.3912 44 A13 93.69 98.18 2.3798 2.4938 20 DQ9 –78.51 –94.14 –1.9941 –2.3912 45 A12 83.64 98.18 2.1245 2.4938 21 DQ2 –69.94 –94.14 –1.7766 –2.3912 46 A11 73.59 98.18 1.8692 2.4938 22 DQ10 –60.30 –94.14 –1.5317 –2.3912 47 A10 63.54 98.18 1.6140 2.4938 23 DQ3 –51.74 –94.14 –1.3141 –2.3912 48 A9 53.49 98.18 1.3587 2.4938 24 DQ11 –42.10 –94.14 –1.0692 –2.3912 49 A8 43.20 98.18 1.0972 2.4938 25 VSS –34.48 –94.14 –0.8758 –2.3912 50 VCC 23.10 98.18 0.5866 2.4938 51 LBA# 14.94 98.18 0.3795 2.4938 Note: The coordinates above are relative to the die center and can be used to operate wire bonding equipment. 8 –2.3912 Am29BL802C Known Good Die S U P P L E M E N T PAD DESCRIPTION Pads relative to VCC. Pad Signal Pad Center (mils) X Y Pad Center (millimeters) X Y Pad Signal Pad Center (mils) X Y Pad Center (millimeters) X Y 1 WE# –26.21 0.00 –0.6656 0.0000 26 CLK –47.53 –192.32 –1.2071 –4.8850 2 RESET# –36.51 0.00 –0.9272 0.0000 27 BAA# –37.48 –192.32 –0.9519 –4.8850 3 RY/BY# –46.44 0.00 –1.1795 0.0000 28 IND# 2.66 –192.32 0.0677 –4.8850 4 A18 –56.49 0.00 –1.4348 0.0000 29 VCC 18.94 –192.32 0.4812 –4.8850 5 A17 –66.54 0.00 –1.6900 0.0000 30 VCC 27.09 –192.32 0.6883 –4.8850 6 A7 –76.59 0.00 –1.9453 0.0000 31 DQ4 33.96 –192.32 0.8627 –4.8850 7 A6 –86.64 0.00 –2.2006 0.0000 32 DQ12 43.60 –192.32 1.1076 –4.8850 8 A5 –96.69 0.00 –2.4558 0.0000 33 DQ5 52.17 –192.32 1.3252 –4.8850 9 A4 –106.74 0.00 –2.7111 0.0000 34 DQ13 61.81 –192.32 1.5701 –4.8850 10 A3 –116.79 0.00 –2.9664 0.0000 35 DQ6 70.37 –192.32 1.7876 –4.8850 11 A2 –125.42 0.00 –3.1854 0.0000 36 DQ14 80.02 –192.32 2.0326 s–4.8850 12 A1 –134.04 0.00 –3.4045 0.0000 37 DQ7 88.58 –192.32 2.2501 –4.8850 13 A0 –142.67 0.00 –3.6236 0.0000 38 DQ15 98.22 –192.32 2.4950 –4.8850 14 CE# –151.29 0.00 –3.8426 0.0000 39 VSS 105.09 –192.32 2.6694 –4.8850 15 VSS –151.29 –192.32 –3.8426 –4.8850 40 NC 105.09 0.00 2.6694 0.0000 16 OE# –138.04 –192.32 –3.5060 –4.8850 41 A16 96.47 0.00 2.4504 0.0000 17 DQ0 –129.46 –192.32 –3.2881 –4.8850 42 A15 87.84 0.00 2.2313 0.0000 18 DQ8 –119.82 –192.32 –3.0432 –4.8850 43 A14 79.22 0.00 2.0122 0.0000 19 DQ1 –111.25 –192.32 –2.8257 –4.8850 44 A13 70.59 0.00 1.7932 0.0000 20 DQ9 –101.61 –192.32 –2.5807 –4.8850 45 A12 60.54 0.00 1.5379 0.0000 21 DQ2 –93.04 –192.32 –2.3632 –4.8850 46 A11 50.49 0.00 1.2826 0.0000 22 DQ10 –83.40 –192.32 –2.1183 –4.8850 47 A10 40.44 0.00 1.0274 0.0000 23 DQ3 –74.84 –192.32 –1.9007 –4.8850 48 A9 30.39 0.00 0.7721 0.0000 24 DQ11 –65.20 –192.32 –1.6558 –4.8850 49 A8 20.10 0.00 0.5106 0.0000 25 VSS –57.58 –192.32 –1.4624 –4.8850 50 VCC 0.00 0.00 0.0000 0.0000 51 LBA# –8.16 0.00 –0.2071 0.0000 Note: The coordinates above are relative to the VCC location and can be used to operate wire bonding equipment. Am29BL802C Known Good Die 9 S U P P L E M E N T ORDERING INFORMATION Standard Products AMD standard products are available in several packages and operating ranges. The order number (Valid Combination) is formed by a combination of the following: Am29BL802C B 80R DP E 1 DIE REVISION This number refers to the specific AMD manufacturing process and product technology reflected in this document. It is entered in the revision field of AMD standard product nomenclature. TEMPERATURE RANGE I = Industrial (–40°C to +85°C) E = Extended (–55°C to +125°C) H = Super Extended (–55°C to +145°C) PACKAGE TYPE AND MINIMUM ORDER QUANTITY DP = Waffle Pack 125 die per 5 tray stack DG = Gel-Pak® Die Tray 336 die per 6 tray stack DT = Surftape™ (Tape and Reel) 1600 per 7-inch reel DW = Gel-Pak® Wafer Tray (sawn wafer on frame) Call AMD sales office for minimum order quantity SPEED OPTION See Product Selector Guide and Valid Combinations BOOT CODE SECTOR ARCHITECTURE B = Bottom boot sector DEVICE NUMBER/DESCRIPTION Am29BL802C Known Good Die 8 Megabit (512 K x 16-Bit) CMOS Flash Memory—Die Revision 1 3.0 Volt-only Program and Erase Valid Combinations AM29BL802CB-80R (30 pF loading) 10 DPI 1, DPE 1, DPH 1 DGI 1, DGE 1, DGH 1 DTI 1, DTE 1, DTH 1 DWI 1, DWE 1, DWH 1 Valid Combinations Valid Combinations list configurations planned to be supported in volume for this device. Consult the local AMD sales office to confirm availability of specific valid combinations and to check on newly released combinations.s Am29BL802C Known Good Die S U P P L E M E N T PACKAGING INFORMATION Surftape Packaging Direction of Feed 16 mm Orientation relative to leading edge of tape and reel AMD logo location Gel-Pak and Waffle Pack Packaging Orientation relative to top left corner of Gel-Pak and Waffle Pack cavity plate AMD logo location Am29BL802C Known Good Die 11 S U P P L E M E N T PRODUCT TEST FLOW Figure 1 provides an overview of AMD’s Known Good Die test flow. For more detailed information, refer to the Am29BL802C product qualification database supplement for KGD. AMD implements quality assurance procedures throughout the product test flow. In addition, Wafer Sort 1 Bake 24 hours at 250°C Wafer Sort 2 Wafer Sort 3 High Temperature Packaging for Shipment an off-line quality monitoring program (QMP) further guarantees AMD quality standards are met on Known Good Die products. These QA procedures also allow AMD to produce KGD products without requiring or implementing burn-in. DC Parameters Functionality Programmability Erasability Data Retention DC Parameters Functionality Programmability Erasability DC Parameters Functionality Programmability Erasability Speed Incoming Inspection Wafer Saw Die Separation 100% Visual Inspection Die Pack Shipment Figure 1. AMD KGD Product Test Flow 12 Am29BL802C Known Good Die S U P P L E M E N T PHYSICAL SPECIFICATIONS MANUFACTURING INFORMATION Die dimensions . . . . . . . . . . . 269.7 mils x 214.2 mils . . . . . . . . . . . . . . . . . . . . . . . . . . 6.85 mm x 5.44 mm Manufacturing . . . . . . . . . . . . . . . . . . . . . . . . . . . FASL Die Thickness . . . . . . . . . . . . . . . . . . . . . . . . .500 µm Bond Pad Size . . . . . . . . . . . . . . 3.74 mils x 3.74 mils . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 95 µm x 95 µm Pad Area Free of Passivation . . . . . . . . . .13.99 mils2 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9,025 µm2 Pads Per Die . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .51 Wafer Sort Test . . . . . . . . . . . . Sunnyvale, CA, USA, . . . . . . . . . . . . . . . . . . . . . . . . and Penang, Malaysia Manufacturing ID (Bottom Boot) . . . . . . . . . . . . 98H11 Preparation for Shipment . . . . . . . . Penang, Malaysia Fabrication Process . . . . . . . . . . . . . . . . . . . CS39LS Die Revision . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Bond Pad Metalization . . . . . . . . . . . . . . . . . . . . Al/Cu Die Backside . . . . . . . . . . . . . . . . . . . . . . . . No metal, may be grounded (optional) SPECIAL HANDLING INSTRUCTIONS Passivation. . . . . . . . . . . . . . . . . . Nitride/SOG/Nitride Do not expose KGD products to ultraviolet light or process them at temperatures greater than 250°C. Failure to adhere to these handling instructions will result in irreparable damage to the devices. For best yield, AMD recommends assembly in a Class 10K clean room with 30% to 60% relative humidity. DC OPERATING CONDITIONS VCC (Supply Voltage) . . . . . . . . . . . . . . . 3.0 V to 3.6 V Operating Temperature Industrial . . . . . . . . . . . . . . . . . . . –40°C to +85°C Extended . . . . . . . . . . . . . . . . . . –55°C to +125°C Super Extended . . . . . . . . . . . . –55°C to +145°C Processing Storage Store at a maximum temperature of 30°C in a nitrogenpurged cabinet or vacuum-sealed bag. Observe all standard ESD handling procedures. DC PARAMETER EXCEPTIONS The following specifications replace those given in the Am29BL802 data sheet (publication number 22371): Parameter Description Test Conditions Typ Max Unit CE#, RESET# = VCC±0.3 V 22 35 µA 22 35 µA OE# = VIH 30 50 µA OE# = VIL 30 50 µA ICC3 VCC Standby Current (Note 3) ICC4 VCC Standby Current During Reset RESET# = VSS ± 0.3 V (Note 3) ICC5 Automatic Sleep Mode (Notes 3, 4) VIH = VCC ± 0.3 V; VIL = VSS ± 0.3 V Notes: 3. Maximum ICC specifications are tested with VCC = VCCmax. 4. Automatic sleep mode enables the low power mode when addresses remain stable for tACC + 30 ns. Am29BL802C Known Good Die 13 S U P P L E M E N T AC CHARACTERISTICS Read Operations Speed Options and Temperature Ranges Parameter JEDEC Std. Description Test Setup 80R Unit tAVAV tRC Read Cycle Time (Note ) Min 80 ns tAVQV tACC Address to Output Delay CE# = VIL Max OE# = VIL 80 ns tELQV tCE Chip Enable to Output Delay OE# = VIL Max 80 ns tGLQV tOE Output Enable to Output Delay Max 24 ns tEHQZ tDF Chip Enable to Output High Z (Note ) Max 24 ns tGHQZ tDF Output Enable to Output High Z (Note ) Max 25 ns Read Min 0 ns Toggle and Data# Polling Min 10 ns Min 0 ns Output Enable tOEH Hold Time (Note ) tAXQX tOH Output Hold Time From Addresses, CE# or OE#, Whichever Occurs First (Note ) Not 100% tested. 14 Am29BL802C Known Good Die S U P P L E M E N T TERMS AND CONDITIONS OF SALE FOR AMD NON-VOLATILE MEMORY DIE All transactions relating to unpackaged die under this agreement shall be subject to AMD’s standard terms and conditions of sale, or any revisions thereof, which revisions AMD reserves the right to make at any time and from time to time. In the event of conflict between the provisions of AMD’s standard terms and conditions of sale and this agreement, the terms of this agreement shall be controlling. AMD warrants unpackaged die of its manufacture (“Known Good Die” or “Die”) against defective materials or workmanship for a period of one (1) year from date of shipment. This warranty does not extend beyond the first purchaser of said Die. Buyer assumes full responsibility to ensure compliance with the appropriate handling, assembly and processing of Known Good Die (including but not limited to proper Die preparation, Die attach, wire bonding and related assembly and test activities), and compliance with all guidelines set forth in AMD’s specifications for Known Good Die, and AMD assumes no responsibility for environmental effects on Known Good Die or for any activity of Buyer or a third party that damages the Die due to improper use, abuse, negligence, improper installation, accident, loss, damage in transit, or unauthorized repair or alteration by a person or entity other than AMD (“Warranty Exclusions”). The liability of AMD under this warranty is limited, at AMD’s option, solely to repair the Die, to send replacement Die, or to make an appropriate credit adjustment or refund in an amount not to exceed the original purchase price actually paid for the Die returned to AMD, provided that: (a) AMD is promptly notified by Buyer in writing during the applicable warranty period of any defect or nonconformity in the Known Good Die; (b) Buyer obtains authorization from AMD to return the defective Die; (c) the defective Die is returned to AMD by Buyer in accordance with AMD’s shipping instructions set forth below; and (d) Buyer shows to AMD’s satisfaction that such alleged defect or nonconformity actually exists and was not caused by any of the above-referenced Warranty Exclusions. Buyer shall ship such defective Die to AMD via AMD’s carrier, collect. Risk of loss will transfer to AMD when the defective Die is provided to AMD’s carrier. If Buyer fails to adhere to these warranty returns guidelines, Buyer shall assume all risk of loss and shall pay for all freight to AMD’s specified location. The aforementioned provisions do not extend the original warranty period of any Known Good Die that has either been repaired or replaced by AMD. WITHOUT LIMITING THE FOREGOING, EXCEPT TO THE EXTENT THAT AMD EXPRESSLY WARRANTS TO BUYER IN A SEPARATE AGREEMENT SIGNED BY AMD, AMD MAKES NO WARRANTY WITH RESPECT TO THE DIE’S PROCESSING OF DATE DATA, AND SHALL HAVE NO LIABILITY F OR DAMAGES OF ANY KIND, UNDER EQUITY, LAW, OR ANY OTHER THEORY, DUE TO THE FAILURE OF SUCH KNOWN GOOD DIE TO PROCESS ANY PARTICULAR DATA CONTAINING DATES, INCLUDING DATES IN AND AFTER THE YEAR 2000, WHETHER OR NOT AMD RECEIVED NOTICE OF THE POSSIBILITY OF SUCH DAMAGES. THIS WARRANTY IS EXPRESSED IN LIEU OF ALL OTHER WARRANTIES, EXPRESSED OR IMPLIED, INCLUDING THE IMPLIED WARRANTY OF FITNESS FOR A PARTICULAR PURPOSE, THE IMPLIED WARRANTY OF MERCHANTABILITY AND OF ALL OTHER OBLIGATIONS OR LIABILITIES ON AMD’s PART, AND IT NEITHER ASSUMES NOR AUTHORIZES ANY OTHER PERSON TO ASSUME FOR AMD ANY OTHER LIABILITIES. THE FOREGOING CONSTITUTES THE BUYER’S SOLE AND EXCLUSIVE REMEDY FOR THE FURNISHING OF DEFECTIVE OR NON CONFORMING KNOWN GOOD DIE AND AMD SHALL NOT IN ANY EVENT BE LIABLE FOR INCREASED MANUFACTURING COSTS, DOWNTIME COSTS, DAMAGES RELATING TO BUYER’S PROCUREMENT OF SUBSTITUTE DIE (i.e., “COST OF COVER”), LOSS OF PROFITS, REVENUES OR GOODWILL, LOSS OF USE OF OR DAMAGE TO ANY ASSOCIATED EQUIPMENT, OR ANY OTHER INDIRECT, INCIDENTAL, SPECIAL OR CONSEQUENTIAL DAMAGES BY REASON OF THE FACT THAT SUCH KNOWN GOOD DIE SHALL HAVE BEEN DETERMINED TO BE DEFECTIVE OR NON CONFORMING. Buyer agrees that it will make no warranty representations to its customers which exceed those given by AMD to Buyer unless and until Buyer shall agree to indemnify AMD in writing for any claims which exceed AMD’s warranty. Known Good Die are not designed or authorized for use as components in life support appliances, devices or systems where malfunction of the Die can reasonably be expected to result in a personal injury. Buyer’s use of Known Good Die for use in life support applications is at Buyer’s own risk and Buyer agrees to fully indemnify AMD for any damages resulting in such use or sale. Am29BL802C Known Good Die 15 S U P P L E M E N T REVISION SUMMARY Revision A (December 19, 2000) Revision A+2 (September 13, 2002) Initial release. Changed title from Boot Sector to Burst Sector. Revision A+1 (June 27, 2001) AC Characteristics Manufacturing Information Added Read Options, Burst Mode Read, Erase/ Program Operations, and Alternate CE# Controlled Erase/Program Operations Tables. Added Penang, Malaysia as a test facility (ACN2016). Trademarks Copyright © 2001 Advanced Micro Devices, Inc. All rights reserved. AMD, the AMD logo, and combinations thereof are registered trademarks of Advanced Micro Devices, Inc. Product names used in this publication are for identification purposes only and may be trademarks of their respective companies. 16 Am29BL802C Known Good Die