Series AM40UW-Z 40 Watt | DC-DC Converter FEATURES: • • • • • Models Single output Model Input Voltage (V) AM40UW-2403SZ AM40UW-2405SZ AM40UW-2412SZ AM40UW-2415SZ AM40UW-4803SZ AM40UW-4805SZ AM40UW-4812SZ AM40UW-4815SZ 9-36 9-36 9-36 9-36 18-75 18-75 18-75 18-75 Models Dual output Model Input Voltage (V) AM40UW-2412DZ AM40UW-2415DZ AM40UW-4812DZ AM40UW-4815DZ 9-36 9-36 18-75 18-75 Ultra Wide Input 4:1 Range Full SMD Technology 1600 VDC Isolation Efficiency up to 92% Soft Start • • • • Adjustable Output Voltage Remote ON/OFF Function Over Current, Voltage, & Temperature Protection Operating temperature -40oC to + 85oC Output Voltage (V) Output Current max (A) Isolation (VDC) 10 8 3.35 2.65 10 8 3.35 2.65 1600 1600 1600 1600 1600 1600 1600 1600 Output Voltage (V) Output Current max (A) Isolation (VDC) 3.3 5 12 15 3.3 5 12 15 ±12 ±15 ±12 ±15 ±1.65 ±1.35 ±1.65 ±1.35 1600 1600 1600 1600 Max Capacitive Load (uF) Efficiency (%) 25000 13000 2300 1500 25000 13000 2300 1500 89 91 90 90 90 92 90 90 Max Capacitive Load (uF) Efficiency (%) ±1200 ±750 ±1200 ±750 89 90 80 90 NOTE: All specifications in this datasheet are measured at an ambient temperature of 25°C, humidity<75%, nominal input voltage and at rated output load unless otherwise specified. Input Specifications Parameters Voltage range Filter Start up time Absolute Maximum Rating Peak Input Voltage time Nominal 24 48 On/Off control No Load Input Current Under voltage lockout Input reflected ripple current Isolation Specifications Parameters Tested I/O voltage Resistance Capacitance www.aimtec.com F 051e R12.D Typical 24 48 24 ON/OFF 48 ON/OFF Maximum 9-36 18-75 π(Pi) Network 25 Units VDC 50 100 100 ON –3.0 -12 (or open) ; OFF -0 -1.2 (or short pin 2 to pin 3) Off idle current: 5mA 100 8.6/7.9 17.6/16 20 Conditions Typical 3 sec >1000 2500 Tel: +1 514 620 2722 1 of 5 Rated 1600 ms VDC ms mA VDC mA p-p Units VDC MOhm pF Toll free: + 1 888 9 AIMTEC (924 6832) North America only Series AM40UW-Z 40 Watt | DC-DC Converter Output Specifications Parameters Conditions Voltage accuracy Cross Regulation (Dual Output Models) Over voltage protection Over current protection Short Circuit protection Short circuit restart Thermal shutdown Line voltage regulation Load voltage regulation (Single) Load voltage regulation (Dual) Temperature coefficient Ripple & Noise Voltage adjustment range Minimum Load Current General Specifications Parameters Switching frequency Operating temperature Storage temperature Maximum case temperature Derating Cooling Humidity Case material Weight Dimensions (L x W x H) MTBF Maximum soldering temperature Transient recovery time Transient recovery deviation Typical 25% load on one output 100% load on second load Full Load On Case HL-LL Iout=0% to 100% Iout=0% to 100% 20MHz Bandwidth ±1 ±5 Zener Diode Clamp 150 Continuous Auto-Restart 110 ±0.5 ±0.5 ±1 ±0.02 150 ±10 0 Conditions 100% load With derating above 55 oC (see graph below) Above 55 oC Maximum Typical 270 Units % % % ºC % of Vin % % %/oC mV p-p % % of Max Maximum 2 Free Air Convection KHz o -40 to +85 -40 to +125 Units C o 105 95 Nickel – coated Copper 60 2.00 x 2.00 x 0.40 inches 50.81 x 50.81 10.14 mm >1500000 hrs Calculated using MIL-HDBK-217 F at +25 oC 1.5mm from case for 10 sec 260 250 ±3 C C %/ oC o % RH g o C uS mS Safety Specifications Standards Agency Approval Safety www.aimtec.com F 051e R12.D CE, meet IEC 60950-1:2001 EN55022: 2006 + A1:2007, Class A EN55024:1998 + A1:2001 + A2:2003 IEC61000-4-2:1995 + A1:1998 + A2:2000, Perf. Criteria B IEC61000-4-3:2006, Perf. Criteria A IEC61000-4-4:2004, Perf. Criteria B (external 220uF/100V cap required) IEC61000-4-5:2005, Perf. Criteria B (external 220uF/100V cap required) IEC61000-4-6:2007, Perf. Criteria A IEC61000-4-8, Perf:1993 + A1:2000, Criteria A Tel: +1 514 620 2722 2 of 5 Toll free: + 1 888 9 AIMTEC (924 6832) North America only Series AM40UW-Z 40 Watt | DC-DC Converter Pin Out Specifications Pin Single +V Input -V Input On/Off Control - Sense + Sense +V Output -V Output Trim 1 2 3 4 5 6 7 8 Dual +V Input -V Input On/Off Control +V Output Common Common -V Output Trim Dimensions 4 50.80 (2.00) 1 5 27.90 (1.10) 2 6 3 10.16 (0.40) 7 8 2.54 (0.10) Printed Face 32.98 (1.30) Bottom View 5.08 5.08 (0.20) 7.62 (0.20) 7.62 (0.30) (0.30) 5.08 (0.20) 50.80 (2.00) 2.54 (0.1) 45.72 (1.80) 10.16 (0.40) Dimensions mm(inch) Case Tolerance ±0.50 (±0.02) Pin Pitch Tolerance ±0.35 (±0.014) 5.08 (0.20) Ø 1.00 (0.04) www.aimtec.com F 051e R12.D Tel: +1 514 620 2722 3 of 5 Toll free: + 1 888 9 AIMTEC (924 6832) North America only Series AM40UW-Z 40 Watt | DC-DC Converter Derating Free Air Convection 55º C Output Power (%) 100 80 Safe Operating Area 60 40 20 0 - 40 - 20 0 20 40 60 80 85 100 Ambient Temperature º C Trimming Control ON/OFF + V input On/ Off Control - V input www.aimtec.com F 051e R12.D + V output DC/DC Converter - V output Tel: +1 514 620 2722 4 of 5 Toll free: + 1 888 9 AIMTEC (924 6832) North America only Series AM40UW-Z 40 Watt | DC-DC Converter Recommended Circuits Conducted and Radiated Emissions Single Output Dual Output 1000pF 2KV, 1206 12uH L 1000pF 2KV, 1206 C3 12uH +V output +V input C1 DC/DC Converter +V output +V input C1 Load 100uF 100V -V input L C3 100uF 100V -V output -V input -V output Load DC/DC Converter Common C2 C2 1000pF 2KV, 1206 1000pF 2KV, 1206 EFT/Surge +V output +V input C1 DC/DC Converter Load 220uF 100V -V input -V output NOTE: 1. Datasheets are updated as needed and as such, specifications are subject to change without notice. Once printed or downloaded, datasheets are no longer controlled by Aimtec; refer to www.aimtec.com for the most current product specifications. 2. Product labels shown, including safety agency certifications on labels, may vary based on the date manufactured. 3. Mechanical drawings and specifications are for reference only. 4. All specifications are measured at an ambient temperature of 25°C, humidity<75%, nominal input voltage and at rated output load unless otherwise specified. 5. Aimtec may not have conducted destructive testing or chemical analysis on all internal components and chemicals at the time of publishing this document. CAS numbers and other limited information are considered proprietary and may not be available for release. 6. This product is not designed for use in critical life support systems, equipment used in hazardous environments, nuclear control systems or other such applications which necessitate specific safety and regulatory standards other the ones listed in this datasheet. 7. Warranty is in accordance with Aimtec’s standard Terms of Sale available at www.aimtec.com. www.aimtec.com F 051e R12.D Tel: +1 514 620 2722 5 of 5 Toll free: + 1 888 9 AIMTEC (924 6832) North America only