AME AME8845 n General Description 3A CMOS LDO n Functional Block Diagram The AME8845 family of linear regulators feature low quiescent current (300µA typ.) with low dropout voltage, making them ideal for battery applications. It is available in TO-252, SOT-223, TO-263 and TO-220 packages. The space-efficient TO-252, SOT-223 packages are attractive for "Pocket" and "Hand Held" applications. OUT IN Overcurrent Shutdown Thermal Shutdown Output voltages are set at the factory and trimmed to 1.5% accuracy. R1 - These rugged devices have both Thermal Shutdown, and Current Fold-back to prevent device failure under the "Worst" operating conditions. AMP + The AME8845 is stable with an output capacitance of 2.2µF or greater. R2 Vref n Features GND n Typical Application l Very Low Dropout Voltage l Guaranteed 3A Output VIN l Accurate to within 1.5% IN AME8845 l 300µA Quiescent Current Typically l Over-Temperature Shutdown l Current Limiting GND 0.1µF VOUT OUT 2.2µF l Short Circuit Current Fold-back l Low Temperature Coefficient l All AME’ s Lead Free Products Meet RoHS Stangdards n Applications l Instrumentation l Portable Electronics l Wireless Devices l PC Peripherals l Battery Powered Widgets Rev.C.03 1 AME AME8845 3A CMOS LDO n Pin Configuration TO-252-2 Top View AME8845 TO-252-2 Top View AME 8845AECSxxx AME 8845BECSxxx 1. IN 1. GND 2. GND (TAB) AME8845 3. OUT 1 2 3 3. IN * Die Attach: Conductive Epoxy SOT-223 Top View 1 2 * Die Attach: Non-Conductive Epoxy 3 SOT-223 Top View AME8845 AME8845AEGTxxx AME8845BEGTxxx 1. IN 1. GND 2. GND (TAB) AME8845 3. OUT 1 2 3 * Die Attach: Conductive Epoxy TO-220-3 Top View 3. IN 1 2 3 AME 8845BEBTxxx 1. IN 1. GND 2. GND (TAB) 2. OUT(TAB) 3. IN AMExxxx AME8845 * Die Attach: Conductive Epoxy 2 3 * Die Attach: Non-Conductive Epoxy AME 8845AEBTxxx 3. OUT 2 2. OUT (TAB) TO-220-3 Top View AMExxxx AME8845 1 2. OUT (TAB) * Die Attach: Non-Conductive Epoxy 1 2 3 Rev.C.03 AME AME8845 3A CMOS LDO n Pin Configuration TO-263-3 Top View AME8845 1 Rev.C.03 2 3 TO-263-3 Top View AME 8845AEDTxxx AME 8845BEDTxxx 1. IN 1. GND 2. GND (TAB) AME8845 2. OUT (TAB) 3. OUT 3. IN * Die Attach: Conductive Epoxy * Die Attach: Non-Conductive Epoxy 1 2 3 3 AME AME8845 3A CMOS LDO n Ordering Information AME8845 x x x x xxx x Special Feature Output Voltage Number of Pin Package Type Operating Ambient Temperature Range Pin Configuration Pin Configuration A: (TO-252-2) B: (TO-252-2) A: (TO-263-3) B: (TO-263-3) A: (TO-220-3) B: (TO-220-3) A: (SOT-223) B: (SOT-223) 4 1. IN 2. GND 3. OUT 1. GND 2. OUT 3. IN Operating Ambient Number Temperature Package Type Output Voltage of Range Pins E: -40OC to +85OC B: C: D: G: TO-220 TO-252 TO-263 SOT-223 S: 2 T: 3 150: 180: 250: 330: V=1.5V V=1.8V V=2.5V V=3.3V Special Feature Z: Lead Free 1. IN 2. GND 3. OUT 1. GND 2. OUT 3. IN 1. IN 2. GND 3. OUT 1. GND 2. OUT 3. IN 1. IN 2. GND 3. OUT 1. GND 2. OUT 3. IN Rev.C.03 AME AME8845 3A CMOS LDO n Ordering Information(contd.) Part Number AME8845AEBT150Z AME8845AEBT180Z AME8845AEBT250Z AME8845AEBT330Z AME8845BEBT150Z AME8845BEBT180Z AME8845BEBT250Z AME8845BEBT330Z AME8845AECS150Z AME8845AECS180Z AME8845AECS250Z AME8845AECS330Z Marking* AME8845 AEBT150 yyww AME8845 AEBT180 yyww AME8845 AEBT250 yyww AME8845 AEBT330 yyww AME8845 BEBT150 yyww AME8845 BEBT180 yyww AME8845 BEBT250 yyww AME8845 BEBT330 yyww AME8845 AECS150 yyww AME8845 AECS180 yyww AME8845 AECS250 yyww AME8845 AECS330 yyww Output Voltage Package Operating Ambient Temperature Range 1.50 TO-220-3 - 40oC to +85oC 1.80 TO-220-3 - 40oC to +85oC 2.50 TO-220-3 - 40oC to +85oC 3.30 TO-220-3 - 40oC to +85oC 1.50 TO-220-3 - 40oC to +85oC 1.80 TO-220-3 - 40oC to +85oC 2.50 TO-220-3 - 40oC to +85oC 3.30 TO-220-3 - 40oC to +85oC 1.50 TO-252-2 - 40oC to +85oC 1.80 TO-252-2 - 40oC to +85oC 2.50 TO-252-2 - 40oC to +85oC 3.30 TO-252-2 - 40oC to +85oC Note: yyww/ yww represents the date code * A line on top of the first letter represents lead free plating such as AME8845 Please consult AME sales office or authorized Rep./Distributor for output voltage and package type availability. Rev.C.03 5 AME AME8845 3A CMOS LDO n Ordering Information(contd.) Part Number AME8845BECS150Z AME8845BECS180Z AME8845BECS250Z AME8845BECS330Z AME8845AEDT150Z AME8845AEDT180 AME8845AEDT180Z AME8845AEDT250 AME8845AEDT250Z AME8845AEDT330Z AME8845BEDT150Z AME8845BEDT180Z AME8845BEDT250Z AME8845BEDT330Z 6 Marking* AME8845 BECS150 yyww AME8845 BECS180 yyww AME8845 BECS250 yyww AME8845 BECS330 yyww AME8845 AEDT150 yyww AME8845 AEDT180 yyww AME8845 AEDT180 yyww AME8845 AEDT250 yyww AME8845 AEDT250 yyww AME8845 AEDT330 yyww AME8845 BEDT150 yyww AME8845 BEDT180 yyww AME8845 BEDT250 yyww AME8845 BEDT330 yyww Output Voltage Package Operating Ambient Temperature Range 1.50 TO-252-2 - 40oC to +85oC 1.80 TO-252-2 - 40oC to +85oC 2.50 TO-252-2 - 40oC to +85oC 3.30 TO-252-2 - 40oC to +85oC 1.50 TO-263-3 - 40oC to +85oC 1.80 TO-263-3 - 40oC to +85oC 1.80 TO-263-3 - 40oC to +85oC 2.50 TO-263-3 - 40oC to +85oC 2.50 TO-263-3 - 40oC to +85oC 3.30 TO-263-3 - 40oC to +85oC 1.50 TO-263-3 - 40oC to +85oC 1.80 TO-263-3 - 40oC to +85oC 2.50 TO-263-3 - 40oC to +85oC 3.30 TO-263-3 - 40oC to +85oC Rev.C.03 AME AME8845 3A CMOS LDO n Ordering Information Part Number AME8845AEDV150Z AME8845AEDV180Z AME8845AEDV250Z AME8845AEDV330Z AME8845BEDV150Z AME8845BEDV180Z AME8845BEDV250Z AME8845BEDV330Z Marking* AME8845 AEDV150 yyww AME8845 AEDV180 yyww AME8845 AEDV250 yyww AME8845 AEDV330 yyww AME8845 BEDV150 yyww AME8845 BEDV180 yyww AME8845 BEDV250 yyww AME8845 BEDV330 yyww Output Voltage Package Operating Ambient Temperature Range 1.50 TO-263-5 - 40oC to +85 oC 1.80 TO-263-5 - 40oC to +85 oC 2.50 TO-263-5 - 40oC to +85 oC 3.30 TO-263-5 - 40oC to +85 oC 1.50 TO-263-5 - 40oC to +85 oC 1.80 TO-263-5 - 40oC to +85 oC 2.50 TO-263-5 - 40oC to +85 oC 3.30 TO-263-5 - 40oC to +85 oC AME8845AEGT150Z BGIyww 1.50 SOT-223 - 40oC to +85 oC AME8845AEGT180 BAZyww 1.80 SOT-223 - 40oC to +85 oC AME8845AEGT180Z BAZyww 1.80 SOT-223 - 40oC to +85 oC AME8845AEGT250 AZSyww 2.50 SOT-223 - 40oC to +85 oC AME8845AEGT250Z AZSyww 2.50 SOT-223 - 40oC to +85 oC AME8845AEGT330Z BDFyww 3.30 SOT-223 - 40oC to +85 oC Rev.C.03 7 AME AME8845 3A CMOS LDO n Absolute Maximum Ratings Parameter Maximum Unit Input Voltage -0.3 to +7 V EN Voltage -0.3 to +7 V Output Voltage -0.3 to VIN + 0.3 V Output Current PD / (V IN - VOUT) mA B* ESD Classification Caution: Stress above the listed absolute maximum rating may cause permanent damage to the device * HBM B:2000~3999V n Recommended Operating Conditions Parameter Symbol Rating Unit Ambient Temperature Range TA - 40 to +85 o Junction Temperaturen Range TJ - 40 to +125 o Storage Temperaturen Range TSTG - 65 to +150 o C C C n Thermal Information Parameter Package TO-220-3 TO-252-2 Thermal Resistance* (Junction to Case) TO-263-3 SOT-223 Die Attach Symbol Maximum Conductive Epoxy 6 Non-Conductive Epoxy 24 Conductive Epoxy 5 Non-Conductive Epoxy 30 θ JC Unit o Conductive Epoxy 5 Non-Conductive Epoxy 27 Conductive Epoxy 25 Non-Conductive Epoxy 31 C/W * Measure θJC on backside center of tab. 8 Rev.C.03 AME AME8845 3A CMOS LDO n Thermal Information(contd.) Parameter Package TO-220-3 TO-252-2 Thermal Resistance (Junction to Ambient) TO-263-3 SOT-223 TO-220-3 TO-252-2 Internal Power Dissipation TO-263-3 SOT-223 Die Attach Symbol Maximum Conductive Epoxy 55 Non-Conductive Epoxy 80 Conductive Epoxy 90 Non-Conductive Epoxy 140 θJA Unit o Conductive Epoxy 80 Non-Conductive Epoxy 100 Conductive Epoxy 120 Non-Conductive Epoxy 135 Conductive Epoxy 2200 Non-Conductive Epoxy 1600 Conductive Epoxy 1200 Non-Conductive Epoxy 1000 PD C/W mW Conductive Epoxy 1700 Non-Conductive Epoxy 1400 Conductive Epoxy 900 Non-Conductive Epoxy 800 Maximum Junction Temperature 150 o C Solder Iron(10 Sec)** 350 o C ** MIL-STD-202G 210F Rev.C.03 9 AME AME8845 3A CMOS LDO n Electrical Specifications VIN = VO(Nom) +1V, CIN=0.1µF, COUT=2.2µF, TA = 25OC unless otherwise noted Parameter Input Voltage VIN Output Voltage Accuracy VO Dropout Voltage Test Condition Symbol VDROPOUT Min IO=1mA IO=3A VO=VO(NOM) -2.0% Note 1 6 V -1.5 1.5 % 1.5V<=VO(NOM)<=1.8V 1200 1.8V<VO(NOM)<2.5V 700 2.5V<=VO(NOM) Output Current Typ Max Units 300 mV 450 IO VO>1.2V 3000 mA Current Limit ILIM VO>1.2V 3 A Short Circuit Current ISC VIN = VO(NOM) +1V, VO<0.4V 1.7 A Quiescent Current IQ IO=0mA 300 Ground Pin Current IGND IO=1mA to 3A 300 Line Regulation REGLINE IO=1mA, VIN=VO+1 to VO+2 -0.2 Load Regulation REGLOAD IO=1mA to 3A -1 0.1 400 µA µA 0.2 % 1 % Over Temperature Shutdown OTS 140 o C Over Temperature Hysterisis OTH 30 o C TC 30 VO Temperature Coefficient Power Supply Rejection Output Voltage Noise EN Input Threshold EN Input Leakage Shutdown Current PSRR eN VEH VEL IO=100mA f=100Hz 70 CO=10µF f=1kHz 50 f=10Hz to 100kHz IO=10mA Co=2.2µF 30 ppm/oC dB VIN =VIN , MIN to VIN , MAX µVrms VIN *0.8 VIN 0 0.4 IEH VEN =VIN =5V 2 IEL VEN =0V, VIN =5V 2 ISD VEN =0V, VIN =5V 10 V µA µA Note1:VIN(min) =VOUT+VDROPOUT 10 Rev.C.03 AME AME8845 3A CMOS LDO n Detailed Description The AME8845 family of CMOS regulators contain a PMOS pass transistor, voltage reference, error amplifier, over-current protection, and thermal shutdown. The P-channel pass transistor receives data from the error amplifier, over-current shutdown, and thermal protection circuits. During normal operation, the error amplifier compares the output voltage to a precision reference. Over-current and Thermal shutdown circuits become active when the junction temperature exceeds 140oC, or the current exceeds 4.5A. During thermal shutdown, the output voltage remains low. Normal operation is restored when the junction temperature drops below 110oC. The AME8845 behaves like a current source when the load reaches 4.5A. However, if the load impedance drops below 0.3 ohms, the current drops back to 600mA to prevent excessive power dissipation. Normal operation is restored when the load resistance exceeds 0.75 ohms. n External Capacitors The AME8845 is stable with an output capacitor to ground of 2.2µF or greater. Ceramic capacitors have the lowest ESR, and will offer the best AC performance. Conversely, Aluminum Electrolytic capacitors exhibit the highest ESR, resulting in the poorest AC response. Unfortunately, large value ceramic capacitors are comparatively expensive. One option is to parallel a 0.1µF ceramic capacitor with a 10µF Aluminum Electrolytic. The benefit is low ESR, high capacitance, and low overall cost. A second capacitor is recommended between the input and ground to stabilize Vin. The input capacitor should be at least 0.1µF to have a beneficial effect. All capacitors should be placed in close proximity to the pins. A "Quiet" ground termination is desirable. This can be achieved with a "Star" connection. Rev.C.03 11 AME AME8845 3A CMOS LDO Dropout Voltage vs. Load Current Temperature Stability 450 2.6 VOUT=2.5V 400 Dropout V oltage (m V) Output V oiltage (V) 2.56 2.52 2.48 2.44 350 300 125oC 250 85oC 200 55oC 150 25oC 100 -5oC -45oC 50 2.4 -45 -35 -25 -15 -5 0 5 15 25 35 45 55 65 75 85 95 105115125 0.0 Temperature (oC) 2.0 2.5 3.0 450 Dropout Voltage @ 3A (m V) Quiescent Current @ 5V (uA) 1.5 Dropout Voltage vs. Temperature Quiescent Current vs.Temperature 350 330 310 290 270 250 -45 -35 -25 -15 -5 5 15 25 35 45 55 65 75 85 95 105 115 125 400 300 250 200 150 -45 -35 -25 -15 -5 5 15 25 35 45 55 65 75 85 95 105115125 Temperature (o C) Current Limit vs. Temperature Quiescent Current vs. Supply Voltage 9.0 450 8.0 400 125oC 7.0 350 Curr ent Lim it (A) 85oC 300 55oC -45oC 250 -5oC 200 25oC 150 6.0 5.0 4.0 3.0 2.0 100 1.0 50 0 0.0 VOUT =2.5V 350 Temperature (oC) Quiescent Current (uA) 1.0 Load Current (A) 370 1.0 2.0 3.0 4.0 Supply Voltage (V) 12 0.5 5.0 6.0 0.0 -40-30 -20 -10 0 10 20 25 30 40 50 60 70 80 90100 110 125 Temperature(oC) Rev.C.03 AME AME8845 3A CMOS LDO Output Noise vs. Frequency Output Voltage(2.5V) vs. Input Voltage 3.0 25 2.0 55 oC 85 C o 1.5 125 oC 1.0 -45C 0 1 VIL=100mA VOUT=3.3V 15 10 5 -45 oC -5 oC 25 oC 0.5 0.0 VIN=5V CL=10µF 20 Output Noise (uV) O utput V oltage (V) 2.5 2 3 4 5 0 10 6 100 1000 Input Voltage (V) -30 300 PSRR (dB) -40 -50 -60 VIN=5V ILOAD=100mA C L=10µF VOUT=3.3V 1.0E+02 1.0E+03 1.0E+04 1.0E+05 Ground Current (µ A) 350 -80 1.0E+01 100000 Ground Current vs. Load Current PSRR vs. Frequency -20 -70 10000 Frequency (HZ) IQ(uA) 250 200 150 Vout = 3.3V Cin= 0.1 μF(ceramic) Cout= 2.2 μF(ceramic) Vin= Vo+1.0V 100 50 0 0.0 1.0E+06 Frequency (Hz) 0.5 1.0 1.5 2.0 2.5 3.0 Load Current (A) Load Regulation Deviation Line Transient Response 0.12 0.10 V OUT =2.5V CIN=3.3µF (Ceramic) COUT=3.3µF (Ceramic) ∆IL=3A 0.08 Output Voltage Deviation(mV) 0.14 Cin= 0 Cout= 4.7 μF(ceramic) 100 Vout = 3.3V Vin= 5.3V~4.3V TA =25oC ILOAD =1mA 50 0 0.06 0.04 0.02 Input Voltage(V) O utput Voltage Deviation (% ) 0.16 0.00 -0.02 -0.04 5.3 4.3 -0.06 -40-30 -20 -10 0 10 20 25 30 40 50 60 70 80 90100 110 125 Temperature(oC) Rev.C.03 Time (20μS/DIV) 13 AME AME8845 3A CMOS LDO Load Current(A) Output Voltage Deviation(mV) Load Transient Response Cin= 0.1 μF(ceramic) Li Cout= 10uF(Tantalum) 100 Vout = 3.3V Vin= 5.3V~4.3V TA =25oC ILOAD:100mA--->3A 50 0 3 0.1 Time (500μS/DIV) 14 Rev.C.03 AME AME8845 3A CMOS LDO n Tape and Reel Dimension SOT-223 P W AME AME PIN 1 Carrier Tape, Number of Components Per Reel and Reel Size Package Carrier Width (W) Pitch (P) Part Per Full Reel Reel Size SOT-223 12.0±0.1 mm 4.0±0.1 mm 2500pcs 330±1 mm TO-252-2 P PIN 1 W AME AME Carrier Tape, Number of Components Per Reel and Reel Size Rev.C.03 Package Carrier Width (W) Pitch (P) Part Per Full Reel Reel Size TO-252-2 16.0±0.1 mm 4.0±0.1 mm 2500pcs 330±1 mm 15 AME AME8845 3A CMOS LDO n Tape and Reel Dimension TO-263-3 P PIN 1 W AME AME Carrier Tape, Number of Components Per Reel and Reel Size 16 Package Carrier Width (W) Pitch (P) Part Per Full Reel Reel Size TO-263-3 24.0±0.1 mm 4.0±0.1 mm 800pcs 330±1 mm Rev.C.03 AME AME8845 3A CMOS LDO n Package Dimension TO-263-3 SYMBOLS Side View Top View Bottom View A K E B1 B H A2 PIN 1 D P G N MILLIMETERS MIN MAX MIN MAX A 9.65 10.67 0.380 0.420 B 8.28 9.66 0.326 0.380 C 4.06 4.83 0.160 0.190 D 0.50 1.36 0.020 0.054 E 1.14 1.45 0.045 0.057 G * H 14.60 K 0.99 P Front View C * 2.54 0.100 15.875 2.93 0.5748 2.28 0.012 2.80 o R 0 B1 A2 5.00 7.30 0.625 0.03898 0.11535 0.31 N R INCHES 0.08976 0.11024 0o 8o 5.70 0.197 0.224 8.05 0.287 0.317 8 o *: Typical Value Notes: 1. Controlling dimension: Millimeters. 2. Maximum lead thickness includes lead finish thickness Minimum lead thickness is the minimum thickness of base material. TO-252-2(DPAK)-EIAJ SYMBOLS Top View Side View E K D1 MAX MIN MAX 0.43 0.58 0.0169 0.0230 B 1.60 1.95 0.0630 0.0768 A C 0.51 1.78 0.0200 0.0701 D 0.43 0.60 0.0169 0.0236 E 6.35 6.80 0.2500 0.2677 E1 G C H MIN A F J INCHES B L PIN 1 MILLIMETERS D F 5.36 7.20 0.2110 0.2835 G 2.20 3.00 0.0866 0.1181 H - * 2.30 - *0.0906 J - 0.97 - 0.0380 K 5.20 5.50 0.2047 0.2165 L 1.40 REF 0.0551 REF D1 E1 3.80 REF 3.81 5.10 0.1496 REF 0.1500 0.2008 *: Typical Value Notes: 1. Controlling dimension: Millimeters. 2. Maximum lead thickness includes lead finish thickness Minimum lead thickness is the minimum thickness of base material. Rev.C.03 17 AME AME8845 3A CMOS LDO n Package Dimension SOT-223 Top View Side View SYMBOLS D B1 θ C MILLIMETERS INCHES MIN MAX MIN MAX A1 0.01 0.10 0.0004 0.0039 B 0.60 0.84 0.0236 0.0330 B1 2.90 3.15 0.1140 0.1240 C 0.24 0.38 0.0094 0.0150 D 6.30 6.71 0.2480 0.2640 E 3.30 3.71 0.1299 0.1460 F 1.40 1.80 0.0551 0.0709 o 13 (4X) H E PIN 1 e Front View e o 13 (4X) H F 2.30 BSC 6.70 θ A1 0 o 0.0906 BSC 7.30 10 o 0.2638 0 o 0.2874 10 o B TO-220-3 Top View G Side View C D SYMBOLS Bottom View A I P P1 G1 PIN 1 M O N 18 K E MILLIMETERS INCHES MIN MAX MIN MAX A 5.58 7.49 0.2197 0.2949 C 2.03 4.83 0.0799 0.1902 D 0.50 1.40 0.0197 0.0551 E 0.30 1.15 0.0118 0.0453 G 9.65 10.67 0.3799 0.4201 I 3.53 4.09 0.1390 0.1610 K 0.50 1.15 0.0197 0.0453 M 1.14 1.78 0.0449 0.0701 N 2.28 2.80 0.0898 0.1102 O 12.70 14.74 0.5000 0.5803 P 14.22 16.51 0.5598 0.6500 P1 5.00 5.70 0.1969 0.2244 G1 7.30 8.05 0.2874 0.3169 Rev.C.03 www.ame.com.tw E-Mail: [email protected] Life Support Policy: These products of AME, Inc. are not authorized for use as critical components in life-support devices or systems, without the express written approval of the president of AME, Inc. AME, Inc. reserves the right to make changes in the circuitry and specifications of its devices and advises its customers to obtain the latest version of relevant information. AME, Inc. , April 2011 Document: 2093-DS8845-C.03 Corporate Headquarter AME, Inc. 2F, No.302, Rui-Guang Road, Nei-Hu District Taipei 114, Taiwan . Tel: 886 2 2627-8687 Fax: 886 2 2659-2989