AP1117 1A Low Dropout Positive Adjustable or Fixed-Mode Regulator Features General Description AP1117 is a low dropout positive adjustable or fixed-mode regulator with minimum of 1A output current capability. The product is specifically designed to provide well-regulated supply for low voltage IC applications such as high-speed bus termination and low current 3.3V logic supply. AP1117 is also well suited for other applications such as VGA cards. AP1117 is guaranteed to have lower than 1.4V dropout at full load current making it ideal to provide well-regulated outputs of 1.25 to 5.0 with 6.4V to 12V input supply. - 1.4V maximum dropout at full load current - Fast transient response - Output current limiting - Built-in thermal shutdown - Packages: SOT223, TO263, TO252, TO220, SOT89 - Good noise rejection - 3-Terminal Adjustable or Fixed 1.5V, 1.8V, 1.9V, 2.5V, 3.3V, 5.0V Applications - PC peripheral - Communication Ordering Information AP 1117 X XX X X Package Low Dropout Regulator E : SOT223-3L K : TO263-3L D : TO252-3L T : TO220-3L Y : SOT89-3L Vout Blank : ADJ Blank : Normal 15 : 1.5V L : Lead Free Package 18 : 1.8V 19: 1.9V 25 : 2.5V 33 : 3.3V 50 : 5.0V Typical Circuit 5V 5V Vin Vin GND Blank : Tube A : Taping C1 100uF C1 100uF Vout Packing Lead Free Vo Vout 3.3V/1A C2 100uF Adj Tab is Vout R1 121 Ω R2 121 Ω 2.5V/1A C2 100uF Tab is Vout ( 5V/3.3V fixed output ) ( 5V/2.5V ADJ output ) Note: Vo = VREF ∗ (1+ R2 ) R1 This datasheet contains new product information. Anachip Corp. reserves the rights to modify the product specification without notice. No liability is assumed as a result of the use of this product. No rights under any patent accompany the sale of the product. Rev.1.0 Aug 17, 2004 1/11 AP1117 1A Low Dropout Positive Adjustable or Fixed-Mode Regulator Connection Diagram 3 PIN SOT223 3 PIN TO252 / TO263 ( Top View ) ( Top View ) 3 Vin 2 Vout 1 Adj (GND) Vin 3 2 1 Tab is Vout Vout Adj (GND) Tab is Vout 3 PIN SOT89 3 PIN TO220 3 Vin 3 Vin 2 Vout 2 Vout 1 Adj (GND) 1 Adj (GND) Tab is Vout Tab is Vout Block Diagram Vin 3 2 Vout + + 1.25V - CURRENT LIMIT 1 + - Thermal Shutdown Anachip Corp. www.anachip.com.tw + GND (FIXED) 1 Adj Rev.1.0 Aug 17, 2004 2/11 AP1117 1A Low Dropout Positive Adjustable or Fixed-Mode Regulator Pin Descriptions NAME I/O PIN # FUNCTION Adj (GND) I 1 A resistor divider from this pin to the Vout pin and ground sets the output voltage. (Ground only for Fixed-Mode) Vout O 2 The output of the regulator. A minimum of 10uF capacitor (0.15Ω ≤ ESR ≤ 20Ω) must be connected from this pin to ground to insure stability. 3 The input pin of regulator. Typically a large storage capacitor (0.15Ω ≤ ESR ≤ 20Ω) is connected from this pin to ground to insure that the input voltage does not sag below the minimum dropout voltage during the load transient response. This pin must always be 1.3V higher than Vout in order for the device to regulate properly. Vin I Absolute Maximum Ratings Symbol Parameter Vin DC Supply Voltage PD Power Dissipation TST Storage Temperature TOP Operating Junction Temperature Range Rating Unit -0.3 to 12 V Internally Limited Anachip Corp. www.anachip.com.tw -65 to +150 oC 0 to +150 oC Rev.1.0 Aug 17, 2004 3/11 AP1117 1A Low Dropout Positive Adjustable or Fixed-Mode Regulator Electrical Characteristics (Under Operating Conditions) PARAMETER Reference Voltage AP1117-ADJ AP1117-1.5 AP1117-1.8 AP1117-1.9 Output Voltage AP1117-2.5 AP1117-3.3 AP1117-5.0 Line Regulation AP1117-XXX AP1117-ADJ AP1117-1.5 AP1117-1.8 Load Regulation AP1117-1.9 AP1117-2.5 AP1117-3.3 AP1117-5.0 CONDITIONS TJ=25oC,(VIN-OUT)=1.5V IO=10mA IOUT = 10mA, TJ = 25oC, 3V≦VIN≦12V o IOUT = 10mA, TJ = 25 C, 3.3V≦VIN≦12V IOUT = 10mA, TJ = 25oC, 3.3V≦VIN≦12V IOUT = 10mA, TJ = 25oC, 4V≦VIN≦12V IOUT = 10mA, TJ = 25oC, 4.8V≦VIN≦12V IOUT = 10mA, TJ = 25oC, 6.5V≦VIN≦12V IO=10mA,VOUT+1.5V<VIN<12V, TJ=25oC VIN=3.3V,Vadj=0,0mA<Io<1A, TJ=25oC (Note 1,2) VIN=3V, 0mA<Io<1A, TJ=25oC (Note 1,2) VIN=3.3V, 0mA<Io<1A, TJ=25oC (Note 1,2) VIN=3.3V, 0mA<Io<1A, TJ=25oC (Note 1,2) VIN=4V, 0mA<Io<1A, TJ=25oC (Note 1,2) VIN = 5V, 0≦IOUT≦1A, o TJ=25 C (Note 1,2) VIN = 8V, 0≦IOUT≦1A, TJ=25oC (Note 1,2) MIN TYP MAX UNIT 1.225 1.250 1.275 V 1.470 1.500 1.530 V 1.764 1.800 1.836 V 1.862 1.900 1.938 V 2.450 2.500 2.550 V 3.235 3.300 3.365 V 4.900 5.000 5.100 V 0.2 % 1 % 12 15 mV 15 18 mV 16 19 mV 20 25 mV 26 33 mV 40 50 mV 1.3 1.4 V Dropout Voltage (VIN-VOUT) AP1117-ADJ/1.5/1.8 IOUT = 1A ,∆VOUT=0.1%VOUT /1.9/2.5/3.3/5.0 AP1117-ADJ/1.5/1.8 (VIN-VOUT) = 5V Current Limit /1.9/2.5/3.3/5.0 o o 0 C≦Tj≦125 C Minimum Load Current AP1117-XXX o Thermal Regulation TA=25 C, 30ms pulse F=120Hz,COUT=25uF Tantalum, IOUT=1A Ripple Rejection AP1117-XXX VIN=VOUT+3V Temperature Stability IO=10mA θ JA Thermal Resistance SOT89 SOT-223 Junction-to-Ambient(No TO-252 heat sink ;No air flow) TO-220/263 SOT89 : Control Circuitry/Power Transistor θ JC Thermal Resistance SOT-223 : Control Circuitry/Power Transistor TO-263 : Control Circuitry/Power Transistor Junction-to-Case TO-252 : Control Circuitry/Power Transistor TO-220 : Control Circuitry/Power Transistor 1. 1 A 5 0.008 10 0.04 mA %/W 60 0.5 300 117 92 85 100 15 0.65/2.7 10 0.65/2.7 70 dB % O C/W O C/W Note1: See thermal regulation specifications for changes in output voltage due to heating effects. Line and load regulation are measured at a constant junction temperature by low duty cycle pulse testing. Load regulation is measured at the output lead = 1/18” from the package. Note2: Line and load regulation are guaranteed up to the maximum power dissipation of 15W. Power dissipation is determined by the difference between input and output differential and the output current. Guaranteed maximum power dissipation will not be available over the full input/output range. Note3: Quiescent current is defined as the minimum output current required in maintaining regulation. At 12V input/output differential the device is guaranteed to regulate if the output current is greater than 10mA. Anachip Corp. www.anachip.com.tw Rev.1.0 Aug 17, 2004 4/11 AP1117 1A Low Dropout Positive Adjustable or Fixed-Mode Regulator Typical Performance Characteristics 0.20 2. 0 Output Voltage Deviation (%) 1. 8 1. 6 Dropout Voltage (V) 1. 4 1. 2 0 I load=800mA -0.20 Tj = 25 oC 1. 0 -0.40 0. 8 Tj = 125 oC 0. 6 -0.80 0. 4 0. 2 0 0 250 500 Output Current (mA) 750 -1 1000 -25 Dropout Voltage vs Output Current 0 25 50 Temperature (oC) 75 100 125 Load Regulation vs Temperature 2 1 0.8 1 0. 5 0 -0.5 -1 -1.5 -2 -50 -25 0 25 50 Temperature (oC) 75 100 125 150 Output Voltage Deviation (%) Output Voltage Change (%) 1.5 0.6 0.4 0.2 0 2 4 7.5 Cin=1uF Cout=10uF Tantalum 6.5 5.5 40 20 0 -20 -40 0 20 40 60 80 100 120 140 160 180 200 TIME (us) Line Transient Response 8 10 12 Line Regulation Load Current (A) Output Voltage Deviation (mV) Output Voltage Deviation (mV) Input Voltage (V) Percent Change in Output Voltage vs Temperature 6 Input Voltage (V) 30 C in = 1uF C out = 10 uF Tantalum Preload = 100mA 20 10 0 -10 -20 2 1 0 -1 0 10 20 30 40 50 TIME (us) 60 70 80 90 100 Load Transient Response Anachip Corp. www.anachip.com.tw Rev.1.0 Aug 17, 2004 5/11 AP1117 1A Low Dropout Positive Adjustable or Fixed-Mode Regulator Marking Information (2) TO252-3L (1) SOT223-3L (Top view) (Top view) XXX 1117X ID Code Month: A~L = 01~12 Year: "1" = 2001 "2" = 2002 1 7- 33 XXXX XX Blank: normal L: Lead Free Package ID Code Xth Week: 01~52 Year: "01" = 2001 "02" = 2002 ~ Blank: normal L: Lead Free Package (4) SOT89-3L (3) TO220-3L ( Top view ) Output Type: 1117: ADJ 1117-15: 1.5V 1117-18: 1.8V 1117-19: 1.9V 1117-25: 2.5V 1117-33: 3.3V 1117-50: 5.0V Logo Output Type: 1117: Adjustable 17-15: 1.5V 17-18: 1.8V 17-19: 1.9V 17-25: 2.5V 17-33: 3.3V 17-50: 5.0V ~ Logo Output Type: 1117 : ADJ 17-15: 1.5V 17-18: 1.8V 17-19: 1.9V 17-25: 2.5V 17-33: 3.3V 17-50: 5.0V 1117-33 XX XX X X XX XX X Date Code Month: A~L Year: 0~9 Logo Blank: normal L: Lead Free Package ID code Xth week: 01~52 Year: "01" = 2001 "02" = 2002 1 2 Identification code 3 Identification Code ( See the table ) Blank: normal L: Lead Free Package Output version ~ DA AP1117-ADJ DB AP1117-1.5V DC AP1117-1.8V DG AP1117-1.9V DD AP1117-2.5V DE AP1117-3.3V DF AP1117-5.0V (5) TO263-3L ( Top view ) Logo 1117-33 XX XX X X Blank: normal L: Lead Free Package ID code Xth week: 01~52 Year: "01" = 2001 "02" = 2002 ~ Output Type: 1117: ADJ 1117-15: 1.5V 1117-18: 1.8V 1117-19: 1.9V 1117-25: 2.5V 1117-33: 3.3V 1117-50: 5.0V Anachip Corp. www.anachip.com.tw Rev.1.0 Aug 17, 2004 6/11 AP1117 1A Low Dropout Positive Adjustable or Fixed-Mode Regulator Package Dimension (1) SOT223 D B1 E 1.6 H 6.4 1.6 3.3 K Land Pattern Recommendation (Unit: mm) B Symbol A a ß c A1 A e1 ß 2.3 1.2 e L Seating Plane Dimensions In Millimeters Dimensions In Inches Min. Nom. Max. Min. Nom. Max. 1.50 1.65 1.80 0.059 0.065 0.071 A1 0.02 0.05 0.08 0.001 0.002 0.003 B 0.60 0.70 0.80 0.024 0.028 0.031 B1 2.90 - 3.15(Ref.) 0.114 - 0.124(Ref.) c 0.28 0.30 0.32 0.011 0.012 0.013 D 6.30 6.50 6.70 0.248 0.256 0.264 E 3.30 3.50 3.70 0.130 0.138 0.146 e 2.3 Basic 0.091 Basic e1 4.6 Basic 0.181 Basic H 6.70 7.00 7.30 0.264 0.276 0.287 L 0.91 1.00 1.10 0.036 0.039 0.043 K α 1.50 1.75 2.00 0.059 0.069 0.079 0° 5 10° 0° 5 β - 13o - - 13o o Anachip Corp. www.anachip.com.tw o 10° - Rev.1.0 Aug 17, 2004 7/11 AP1117 1A Low Dropout Positive Adjustable or Fixed-Mode Regulator (2) TO263 10.9 L3 3 L 15.7 D 9.1 L2 E 1.3 b b2 2.54 Land Pattern Recommendation (Unit: mm) C2 A C e L1 Symbol A b b2 C C2 D E e L L1 L2 L3 Dimensions In Millimeters Min. Nom. Max. 4.06 4.45 4.83 0.51 0.75 0.99 1.14 1.27 1.40 0.38 TYP. 1.14 1.27 1.40 8.65 9.15 9.65 9.65 9.97 10.29 2.54 BSC. 14.61 15.24 15.88 2.28 2.54 2.80 1.30 2.92 1.27 1.52 1.78 Anachip Corp. www.anachip.com.tw Dimensions In Inches Min. Nom. Max. 0.160 0.175 0.190 0.020 0.030 0.039 0.045 0.050 0.055 0.015 TYP. 0.045 0.050 0.055 0.341 0.380 0.575 0.360 0.393 0.100 BSC. 0.600 0.380 0.405 0.625 0.090 0.050 0.100 0.051 0.060 0.110 0.115 0.070 Rev.1.0 Aug 17, 2004 8/11 AP1117 1A Low Dropout Positive Adjustable or Fixed-Mode Regulator (3) TO252 5.6 L2 E 7.2 D 11.0 5.6 b2 2.0 2.25 L1 1.2 Land Pattern Recommendation (Unit: mm) e e1 Notes: 1. 2. Symbol A A1 b b2 C C1 D E e e1 H L L1 L2 SEATING PLANE A L SEE NOTE2 A1 C H C1 b JEDEC Outline: TO-252 AB Mils suggested for positive contact at mounting. Dimensions In Millimeters Min. Nom. Max. 2.18 2.29 2.39 1.02 1.15 1.27 0.61 TYP. 5.20 5.35 5.50 0.46 0.52 0.58 0.46 0.52 0.58 5.33 5.57 5.80 6.35 6.58 6.80 2.25 BSC. 4.50 BSC. 9.00 9.70 10.40 0.51 0.64 0.83 1.02 1.52 1.78 2.03 Anachip Corp. www.anachip.com.tw Dimensions In Inches Min. Nom. Max. 0.086 0.090 0.094 0.040 0.045 0.050 0.024 TYP. 0.205 0.211 0.217 0.018 0.020 0.023 0.018 0.020 0.023 0.210 0.219 0.228 0.250 0.259 0.268 0.089 BSC. 0.177 BSC. 0.354 0.382 0.409 0.020 0.025 0.033 0.040 0.060 0.070 0.080 Rev.1.0 Aug 17, 2004 9/11 AP1117 1A Low Dropout Positive Adjustable or Fixed-Mode Regulator (4) TO220 E A F SEATING PLANE Q ΦP L1 D H1 L b1 C b J1 e e1 Symbol A b1 b C D E e e1 F H1 J1 L L1 øP Q Dimensions In Millimeters Min. Nom. Max. 3.55 4.20 4.85 1.14 1.46 1.78 0.51 0.83 1.14 0.31 0.72 1.14 14.20 15.35 16.50 9.70 10.20 10.70 2.29 2.54 2.79 4.83 5.08 5.33 0.51 0.95 1.40 5.84 6.35 6.86 2.03 2.48 2.92 12.72 13.72 14.72 3.66 5.00 6.35 3.53 3.81 4.09 2.54 2.98 3.43 Anachip Corp. www.anachip.com.tw Dimensions In Inches Min. Nom. Max. 0.140 0.165 0.191 0.045 0.057 0.070 0.020 0.033 0.045 0.012 0.028 0.045 0.559 0.604 0.650 0.382 0.402 0.421 0.090 0.100 0.110 0.190 0.200 0.210 0.020 0.037 0.055 0.230 0.250 0.270 0.080 0.098 0.115 0.501 0.540 0.580 0.144 0.197 0.250 0.139 0.150 0.161 0.100 0.117 0.135 Rev.1.0 Aug 17, 2004 10/11 AP1117 1A Low Dropout Positive Adjustable or Fixed-Mode Regulator (5) SOT89 1.7 HE E 2.7 D1 1.3 L 1.9 0.4 1.5 0.9 Land Pattern Recommendation (Unit: mm) e1 e 50(2x) 80(2x) A D C b Symbol A B b1 C D D1 e e1 E HE L b1 b Dimensions In Millimeters Min. 1.40 0.36 0.41 0.35 4.40 1.40 2.90 1.45 2.35 3.94 0.80 Nom. 1.50 0.42 0.47 0.39 4.50 1.60 3.00 1.50 2.48 - Max. 1.60 0.48 0.53 0.43 4.60 1.75 3.10 1.55 2.60 4.25 1.20 Anachip Corp. www.anachip.com.tw Dimensions In Inches Min. 0.055 0.014 0.016 0.014 0.173 0.055 0.114 0.057 0.093 0.155 0.031 Nom. 0.059 0.016 0.043 0.015 0.177 0.062 0.118 0.059 0.098 - Max. 0.063 0.018 0.051 0.017 0.181 0.069 0.122 0.061 0.102 0.167 0.047 Rev.1.0 Aug 17, 2004 11/11