AP2181D/AP2191D 1.5A SINGLE CHANNEL CURRENT-LIMITED POWER SWITCH WITH OUTPUT DISCHARGE NEW PRODUCT Description Pin Assignments The AP2181D and AP2191D are integrated high-side power switches optimized for Universal Serial Bus (USB) and other hot-swap applications. The family of devices complies with USB 2.0 and available with both polarities of Enable input. They offer current and thermal limiting and short circuit protection as well as controlled rise time and under-voltage lockout functionality. A 7ms deglitch capability on the opendrain Flag output prevents false over-current reporting and does not require any external components. ( Top View ) GND 1 8 NC IN 2 7 OUT IN 3 6 OUT EN 4 5 FLG All devices are available in SO-8, MSOP-8, MSOP-8-EP, SOT25, and DFN2018-6 packages. SO-8 ( Top View ) Features • • • • • • • • • • • • • • • • • GND 1 8 NC IN 2 7 OUT IN 3 6 OUT EN 4 5 FLG Single USB port power switches with output discharge Over-current and thermal protection 2.1A accurate current limiting Fast transient response Reverse Current Blocking 90mΩ on-resistance Input voltage range: 2.7V – 5.5V 0.6ms typical rise time Very low shutdown current: 1uA (max) Fault report (FLG) with blanking time (7ms typ) ESD protection: 4KV HBM, 300V MM Active high (AP2191D) or active low (AP2181D) enable Ambient temperature range -40ºC to 85°C SO-8, MSOP-8, MSOP-8-EP (Exposed Pad), SOT25, and DFN2018-6: Available in “Green” Molding Compound (No Br, Sb) Lead Free Finish / RoHS Compliant (Note 1) UL Recognized, File Number E322375 (pending) IEC60950-1 CB Scheme Certified MSOP-8 / MSOP-8-EP Note: latter with exposed pad (dotted line) ( Top View ) OUT 1 GND 2 FLG 3 5 IN 4 EN SOT25 ( Top View ) Applications • • • Consumer electronics – LCD TV & Monitor, Game Machines Communications – Set-Top-Box, GPS, Smartphone Computing – Laptop, Desktop, Servers, Printers, Docking Station, HUB GND 1 6 OUT IN 2 5 OUT EN 3 4 FLG DFN2018-6 Notes: 1. EU Directive 2002/95/EC (RoHS). All applicable RoHS exemptions applied. Please visit our website at http://www.diodes.com/products/lead_free.html. AP2181D/2191D Document number: DS32251 Rev. 1 - 2 1 of 18 www.diodes.com June 2010 © Diodes Incorporated AP2181D/AP2191D 1.5A SINGLE CHANNEL CURRENT-LIMITED POWER SWITCH WITH OUTPUT DISCHARGE Typical Application Circuit AP2191D Enable Active High IN Power Supply 2.7V to 5.5V 10k 10uF Load OUT 0.1uF 0.1uF 120uF NEW PRODUCT FLG ON EN GND OFF Available Options Part Number Channel Enable pin (EN) AP2181D AP2191D 1 1 Active Low Active High Current limit (typical) 2.1A 2.1A Recommended maximum continuous load current 1.5A 1.5A Pin Descriptions Pin Number Pin Name SO-8 MSOP-8 SOT25 DFN2018-6 Descriptions MSOP-8-EP GND 1 2 1 Ground IN 2, 3 4 2 3 Voltage input pin (all IN pins must be tied together externally) EN 5 4 FLG 5 3 4 OUT 6, 7 1 5, 6 Voltage output pin (all OUT pins must be tied together externally) NC 8 N/A N/A No internal connection; recommend tie to OUT pins AP2181D/2191D Document number: DS32251 Rev. 1 - 2 Enable input, active low (AP2181D) or active high (AP2191D) Over-current and over-temperature fault report; open-drain flag is active low when triggered 2 of 18 www.diodes.com June 2010 © Diodes Incorporated AP2181D/AP2191D 1.5A SINGLE CHANNEL CURRENT-LIMITED POWER SWITCH WITH OUTPUT DISCHARGE Functional Block Diagram Current Sense IN Discharge Control UVLO NEW PRODUCT Current Limit Driver EN OUT FLG Deglitch Thermal Sense GND Absolute Maximum Ratings Symbol ESD HBM ESD MM VIN VOUT VEN , VFLG Iload TJmax TST Notes: Parameter Human Body Model ESD Protection Machine Model ESD Protection Input Voltage Output Voltage Enable Voltage Maximum Continuous Load Current Maximum Junction Temperature Storage Temperature Range (Note 2) Ratings 4 300 6.5 VIN + 0.3 6.5 Internal Limited 150 -65 to 150 Unit KV V V V V A °C °C 2. UL Recognized Rating from -30°C to 70°C (Diodes qualified TST from -65°C to 150°C) Recommended Operating Conditions Symbol VIN IOUT TA Parameter Input voltage Output Current Operating Ambient Temperature AP2181D/2191D Document number: DS32251 Rev. 1 - 2 3 of 18 www.diodes.com Min 2.7 0 -40 Max 5.5 1.5 85 Unit V A °C June 2010 © Diodes Incorporated AP2181D/AP2191D 1.5A SINGLE CHANNEL CURRENT-LIMITED POWER SWITCH WITH OUTPUT DISCHARGE Electrical Characteristics (TA = 25oC, VIN = +5.0V, unless otherwise stated) NEW PRODUCT Symbol Parameter Test Conditions Min Typ. Max Unit 1.6 1.9 2.5 V VUVLO Input UVLO ISHDN Input Shutdown Current Disabled, IOUT= 0 0.5 1 μA IQ Input Quiescent Current Enabled, IOUT= 0 45 70 μA ILEAK Input Leakage Current Disabled, OUT grounded 0.1 1 μA IREV Reverse Leakage Current Disabled, VIN= 0V, VOUT= 5V, IREV at VIN 0.1 1 μA 95 115 Switch on-resistance VIN = 5V, IOUT= 1.5A 90 110 RDS(ON) TA = 25°C SOT25, MSOP-8, MSOP-8-EP, SO-8 DFN2018-6 -40°C ≤ TA ≤ 85°C VIN = 3.3V, IOUT= 1.5A ISHORT 120 TA = 25°C -40°C ≤ TA ≤ 85°C Short-Circuit Current Limit Enabled into short circuit, CL=120μF ILIMIT Over-Load Current Limit VIN= 5V, VOUT= 4V, CL=120μF, -40°C ≤ TA ≤85°C ITrig Current limiting trigger threshold Output Current Slew rate (<100A/s) , CL=120μF VIL EN Input Logic Low Voltage VIN = 2.7V to 5.5V VIH EN Input Logic High Voltage VIN = 2.7V to 5.5V ISINK EN Input leakage VEN = 5V Output turn-on delay time CL=1μF, Rload=10Ω Output turn-on rise time TD(ON) 140 mΩ 140 170 2.0 1.6 2.1 A 2.6 A 2.6 A 0.8 V 2 V μA 1 0.05 ms CL=1μF, Rload=10Ω 0.6 Output turn-off delay time CL=1μF, Rload=10Ω 0.05 Output turn-off fall time CL=1μF, Rload=10Ω 0.05 0.1 ms RFLG FLG output FET on-resistance IFLG =10mA 20 40 Ω TBlank FLG blanking time CIN=10uF, CL=22μF 7 15 ms TR TD(OFF) TF 4 1.5 ms ms TDIS Discharge time CL= 1μF, VIN = 5V, disabled to VOUT < 0.5V 0.6 ms RDIS Discharge resistance (Note 3) VIN = 5V, disabled, IOUT= 1mA 100 Ω TSHDN Thermal Shutdown Threshold Enabled, Rload=1kΩ 140 °C THYS Thermal Shutdown Hysteresis 25 °C SOT25 (Note 4) θJA SO-8 (Note 4) Thermal Resistance Junction-toMSOP-8 (Note 4) Ambient MSOP-8-EP (Note 5) DFN2018-6 (Note 5) Notes: 170 127 118 o C/W 67 70 3. The discharge function is active when the device is disabled (when enable is de-asserted). The discharge function offers a resistive discharge path for the external storage capacitor. 4. Device mounted on FR-4 substrate PCB, 2oz copper, with minimum recommended pad layout. 5. Device mounted on 2” x 2” FR-4 substrate PCB, 2oz copper, with minimum recommended pad on top layer and thermal vias to bottom layer ground plane. AP2181D/2191D Document number: DS32251 Rev. 1 - 2 4 of 18 www.diodes.com June 2010 © Diodes Incorporated AP2181D/AP2191D 1.5A SINGLE CHANNEL CURRENT-LIMITED POWER SWITCH WITH OUTPUT DISCHARGE Typical Performance Characteristics VEN 50% TD(ON) NEW PRODUCT TD(ON) 90% 10% TD(OFF) TR TF 90% 50% 50% TD(OFF) TR VOUT VEN 50% VOUT 10% TF 90% 10% 90% 10% Figure 1. Voltage Waveforms: AP2181D (left), AP2191D (right) All Enable Plots are for AP2181D Active Low Turn-Off Delay and Fall Time Turn-On Delay and Rise Time Ven 5V/div Ven 5V/div Vout 2V/div Vout 2V/div CL=1uF CL=1uF TA=25°C TA=25°C RL=10Ω RL=10Ω 100us/div 100us/div Turn-On Delay and Rise Time Turn-Off Delay and Fall Time Ven 5V/div Ven 5V/div Vout 2V/div CL=120uF Vout 2V/div CL=120uF TA=25°C TA=25°C RL=10Ω RL=10Ω 500us/div 500us/div AP2181D/2191D Document number: DS32251 Rev. 1 - 2 5 of 18 www.diodes.com June 2010 © Diodes Incorporated AP2181D/AP2191D 1.5A SINGLE CHANNEL CURRENT-LIMITED POWER SWITCH WITH OUTPUT DISCHARGE Typical Performance Characteristics (Continued) Short Circuit Current, Device Enabled Into Short Short Circuit with Blanking Time and Recovery Ven 5V/div VIN=5V VIN=5V TA=25°C CL=120uF TA=25°C Vout 5V/div CL=120uF NEW PRODUCT Vflag 5V/div Iout 2A/div Iout 500mA/div 50ms/div 500us/div 0.6 Ω Load Connected to Enabled Device Power On with Full Load VIN=5V Vflag 2V/div TA=25°C CL=120uF Vin 5V/div Iout 500mA/div Iout 1A/div Vflg 5V/div Vout 5V/div TA=25°C CL=120uF RL=3.3Ω 2ms/div 1ms/div UVLO Increasing With Full Load UVLO Decreasing With Full Load TA=25°C CL=22uF RL=3.3Ω Vin 2V/div Vin 2V/div Iout 500mA/div TA=25°C Iout 500mA/div CL=22uF RL=3.3Ω 1ms/div 10ms/div AP2181D/2191D Document number: DS32251 Rev. 1 - 2 6 of 18 www.diodes.com June 2010 © Diodes Incorporated AP2181D/AP2191D 1.5A SINGLE CHANNEL CURRENT-LIMITED POWER SWITCH WITH OUTPUT DISCHARGE Typical Performance Characteristics (Continued) Discharge Time (No Load Resistance) Vout 2V/div Inrush Current Ven 5V/div TA=25°C VIN=5V No Load Resistance CL =120µF CL =470µF VIN=5V TA=25°C RL=3.3Ω CL=470uF CL=100uF CL=220uF Iout 500mA/div Ven 2V/div 100ms/div 1ms/div Turn-On Time vs Input Voltage Turn-Off Time vs Input Voltage 850 55 750 50 CL=1uF Turn-Off Time (us) Turn-On Time (us) RL=10Ω 650 550 450 CL=1uF RL=10Ω 350 TA=25°C 45 40 35 30 TA=25°C 25 250 1.5 2 2.5 3 3.5 4 4.5 5 5.5 1.5 6 2 2.5 3 3.5 4 4.5 5 5.5 6 Input Voltage (V) Input Voltage (V) Fall Time vs Input Voltage Rise Time vs Input Voltage 25 650 600 24 Fall Time (us) 550 Rise Time (us) NEW PRODUCT CL =22µF 500 450 CL=1uF 400 22 CL=1uF 21 RL=10Ω RL=10Ω 350 23 20 TA=25°C TA=25°C 19 300 2 2.5 3 3.5 4 4.5 5 5.5 6 2 AP2181D/2191D Document number: DS32251 Rev. 1 - 2 2.5 3 3.5 4 4.5 5 5.5 6 Input Voltage (V) Input Voltage (V) 7 of 18 www.diodes.com June 2010 © Diodes Incorporated AP2181D/AP2191D 1.5A SINGLE CHANNEL CURRENT-LIMITED POWER SWITCH WITH OUTPUT DISCHARGE Typical Performance Characteristics (Continued) Supply Current, Output Disabled vs Ambient Temperature Supply Current, Output Enabled vs Ambient Temperature 0.9 Supply Current, Output Disabled (uA) Supply Current, Output Enabled (uA) Vin=5.0V 47 Vin=5.5V 42 37 Vin=2.7V Vin=3.3V 32 Vin=5.5V 0.8 Vin=5.0V 0.7 0.6 Vin=3.3V 0.5 0.4 0.3 0.2 Vin=2.7V 0.1 0.0 27 -60 -40 -20 0 20 40 60 80 -60 100 -40 -20 0 20 40 60 80 100 Ambient Temperature (°C) Ambient Temperature (°C) Static Drain-Source On-State Resistance vs Ambient Temperature Short-Circuit Output Current vs Ambient Temperature 2.60 Vin=2.7V Short-Circuit Output Current (A) Static Drain-Source On-State Resistance (mΩ) 180 170 160 150 140 130 Vin=3.3V 120 110 100 Vin=5V 90 CL=100uF 2.50 Vin=3.3V Vin=2.7V Vin=5.0V 2.40 2.30 2.20 2.10 Vin=5.5V 2.00 80 -60 -40 -20 0 20 40 60 80 -60 100 -40 -20 0 20 40 60 80 100 Ambient Temperature (°C) Ambient Temperature (°C) Threshold Trip Current vs Input Voltage Undervoltage Lockout vs Ambient Temperature 3.24 2.15 Threshold Trip Current (A) 3.22 Undervoltage Lockout (V) NEW PRODUCT 52 2.10 UVLO Rising 2.05 2.00 UVLO Falling 1.95 3.20 3.18 3.16 TA=25°C 3.14 CL=120uF 3.12 3.10 3.08 1.90 -60 -40 -20 0 20 40 60 80 100 AP2181D/2191D Document number: DS32251 Rev. 1 - 2 2.8 3.3 3.8 4.3 4.8 5.3 Input Voltage (V) Ambient Temperature (°C) 8 of 18 www.diodes.com June 2010 © Diodes Incorporated AP2181D/AP2191D 1.5A SINGLE CHANNEL CURRENT-LIMITED POWER SWITCH WITH OUTPUT DISCHARGE Application Note The AP2181D and AP2191D are integrated high-side power switches optimized for Universal Serial Bus (USB) that requires protection functions. The power switches are equipped with a driver that controls the gate voltage and incorporates slew-rate limitation. This, along with the various protection features and special functions, makes these power switches ideal for hot-swap or hot-plug applications. Protection Features: NEW PRODUCT Under-voltage Lockout (UVLO) Under-voltage lockout function (UVLO) guarantees that the internal power switch is initially off during start-up. The UVLO functions only when the switch is enabled. Even if the switch is enabled, the switch is not turned ON until the power supply has reached at least 1.9V. Whenever the input voltage falls below approximately 1.9V, the power switch is turned off. This facilitates the design of hot-insertion systems where it is not possible to turn off the power switch before input power is removed. Over-current and Short Circuit Protection An internal sensing FET is employed to check for over-current conditions. Unlike current-sense resistors, sense FETs do not increase the series resistance of the current path. When an overcurrent condition is detected, the device maintains a constant output current and reduces the output voltage accordingly. Complete shutdown occurs only if the fault stays long enough to activate thermal limiting. The different overload conditions and the corresponding response of the AP2181D/AP2191D are outlined below: S. NO 1 Conditions Short circuit condition at start-up Explanation Output is shorted before input voltage is applied or before the part is enabled Behavior of the AP2181D/AP2191D The IC senses the short circuit and immediately clamps output current to a certain safe level namely ILIMIT. 2 Short-circuit or Overcurrent condition Short-Circuit or Overload condition that occurs when the part is enabled. • At the instance the overload occurs, higher current may flow for a very short period of time before the current limit function can react. • After the current limit function has tripped (reached the over-current trip threshold), the device switches into current limiting mode and the current is clamped at ILIMIT. 3 Gradual increase from nominal operating current to ILIMIT Load increases gradually until the current-limit threshold.(ITRIG) The current rises until ITRIG or thermal limit. Once the threshold has been reached, the device switches into its current limiting mode and is set at ILIMIT. Note that when the output has been shorted to GND at extremely low temperature (< -20oC), a minimum 120-μF electrolytic capacitor on the output pin is recommended. A correct capacitor type with capacitor voltage rating and temperature characteristics must be properly chosen so that capacitance value does not drop too low at the extremely low temperature operation. A recommended capacitor should have temperature characteristics of less than 10% variation of capacitance change when operated at extremely low temp. Our recommended aluminum electrolytic capacitor type is Panasonic FC series. AP2181D/2191D Document number: DS32251 Rev. 1 - 2 9 of 18 www.diodes.com June 2010 © Diodes Incorporated AP2181D/AP2191D 1.5A SINGLE CHANNEL CURRENT-LIMITED POWER SWITCH WITH OUTPUT DISCHARGE Application Note (Continued) NEW PRODUCT Thermal Protection Thermal protection prevents the IC from damage when the die temperature exceeds safe margins. This mainly occurs when heavy-overload or short-circuit faults are present for extended periods of time. The AP2181D/AP2191D implements a thermal sensing to monitor the operating junction temperature of the power distribution switch. Once the die temperature rises to approximately 140°C, the Thermal protection feature gets activated as follows: The internal thermal sense circuitry turns the power switch off and the FLG output is asserted thus preventing the power switch from damage. Hysteresis in the thermal sense circuit allows the device to cool down to approximately 25°C before the output is turned back on. This built-in thermal hysteresis feature is an excellent feature, as it avoids undesirable oscillations of the thermal protection circuit. The switch continues to cycle in this manner until the load fault is removed, resulting in a pulsed output. The FLG open-drain output is asserted when an over-current occurs with 7-ms deglitch. Reverse Current Protection In a normal MOSFET switch, current can flow in reverse direction (from the output side to the input side) when the output side voltage is higher than the input side, even when the switch is turned off. A reverse-current blocking feature is implemented in the AP21x1 series to prevent such back currents. This circuit is activated by the difference between the output voltage and the input voltage. When the switch is disabled, this feature blocks reverse current flow from the output back to the input. Special Functions: Discharge Function When enable is de-asserted, the discharge function is active. The output capacitor is discharged through an internal NMOS that has a discharge resistance of 100Ω. Hence, the output voltage drops down to zero. The time taken for discharge is dependent on the RC time constant of the resistance and the output capacitor. FLG Response The FLG open-drain output goes active low for any of the two conditions: Over-Current or Over-Temperature. The time from when a fault condition is encountered to when the FLG output goes low is 7-ms (TYP). The FLG output remains low until both over-current and over-temperature conditions are removed. Connecting a heavy capacitive load to the output of the device can cause a momentary Over-current condition, which does not trigger the FLG due to the 7-ms deglitch timeout. This 7-ms timeout is also applicable for Over-current recovery and Thermal recovery. The AP2181D/AP2191D is designed to eliminate erroneous Over-current reporting without the need for external components, such as an RC delay network. Applications Information: Power Supply Considerations A 0.01-μF to 0.1-μF X7R or X5R ceramic bypass capacitor between IN and GND, close to the device, is recommended. This limits the input voltage drop during line transients. Placing a high-value electrolytic capacitor on the input (10-μF minimum) and output pin(s) is recommended when the output load is heavy. This precaution also reduces power-supply transients that may cause ringing on the input. Additionally, bypassing the output with a 0.01-μF to 0.1-μF ceramic capacitor improves the immunity of the device to short-circuit transients. This capacitor also prevents output from going negative during turn-off due to inductive parasitics. AP2181D/2191D Document number: DS32251 Rev. 1 - 2 10 of 18 www.diodes.com June 2010 © Diodes Incorporated AP2181D/AP2191D 1.5A SINGLE CHANNEL CURRENT-LIMITED POWER SWITCH WITH OUTPUT DISCHARGE Application Note (Continued) Power Dissipation and Junction Temperature The low on-resistance of the internal MOSFET allows the small surface-mount packages to pass large current. Using the maximum operating ambient temperature (TA) and RDS(ON), the power dissipation can be calculated by: PD = RDS(ON)× I2 NEW PRODUCT Finally, calculate the junction temperature: TJ = PD x RθJA + TA Where: TA= Ambient temperature °C RθJA = Thermal resistance PD = Total power dissipation Generic Hot-Plug Applications In many applications it may be necessary to remove modules or pc boards while the main unit is still operating. These are considered hot-plug applications. Such implementations require the control of current surges seen by the main power supply and the card being inserted. The most effective way to control these surges is to limit and slowly ramp the current and voltage being applied to the card, similar to the way in which a power supply normally turns on. Due to the controlled rise times and fall times of the AP2181D/AP2191D, these devices can be used to provide a softer start-up to devices being hot-plugged into a powered system. The UVLO feature of the AP2181D/AP2191D also ensures that the switch is off after the card has been removed, and that the switch is off during the next insertion. By placing the AP2181D/AP2191D between the VCC input and the rest of the circuitry, the input power reaches these devices first after insertion. The typical rise time of the switch is approximately 1ms, providing a slow voltage ramp at the output of the device. This implementation controls system surge current and provides a hotplugging mechanism for any device. AP2181D/2191D Document number: DS32251 Rev. 1 - 2 11 of 18 www.diodes.com June 2010 © Diodes Incorporated AP2181D/AP2191D 1.5A SINGLE CHANNEL CURRENT-LIMITED POWER SWITCH WITH OUTPUT DISCHARGE Ordering Information NEW PRODUCT AP 21 X 1 D XX G - X Enable Channel Package Green 8 : Active Low 9 : Active High 1 : 1 Channel S : SO-8 M8 : MSOP-8 MP : MSOP-8-EP W : SOT25 FM : DFN2018-6 G : Green Device AP21X1DSG-13 AP21X1DM8G-13 AP21X1DMPG-13 AP21X1DWG-7 AP21X1DFMG-7 Notes: Package Code S M8 MP W FM Packaging (Note 6) SO-8 MSOP-8 MSOP-8-EP SOT25 DFN2018-6 Packing 7/13 : Tape & Reel 7”/13” Tape and Reel Quantity Part Number Suffix 2500/Tape & Reel -13 2500/Tape & Reel -13 2500/Tape & Reel -13 3000/Tape & Reel -7 3000/Tape & Reel -7 6. Pad layout as shown on Diodes Inc. suggested pad layout document AP02001, which can be found on our website at http://www.diodes.com/datasheets/ap02001.pdf. Marking Information (1) SO-8 ( Top View ) 8 7 6 5 1 : 1 Channel YY : Year : 08, 09,10~ WW : Week : 01~52; 52 represents 52 and 53 week X : Internal Code G : Green Logo Part Number 8 : Active Low 9 : Active High AP21X X D YY WW X X 1 AP2181D/2191D Document number: DS32251 Rev. 1 - 2 2 3 4 12 of 18 www.diodes.com June 2010 © Diodes Incorporated AP2181D/AP2191D 1.5A SINGLE CHANNEL CURRENT-LIMITED POWER SWITCH WITH OUTPUT DISCHARGE Marking Information (Continued) (2) MSOP-8 ( Top View ) 7 6 5 Logo YWX Part Number 8 : Active Low 9 : Active High AP21X X D 1 2 3 A~Z : Green Y : Year : 0~9 W : Week : a~z : 1~26 week; A~Z : 27~52 week; Z represents 52 and 53 week 1 : 1 Channel 4 (3) MSOP-8-EP ( Top View ) 8 7 6 Logo 5 YWXE Part Number 8 : Active Low 9 : Active High AP21X X D 1 2 3 A~Z : Green MSOP-8-EP Y : Year : 0~9 W : Week : a~z : 1~26 week; A~Z : 27~52 week; Z represents 52 and 53 week 1 : 1 Channel 4 (4) SOT25 ( Top View ) 5 4 7 NEW PRODUCT 8 XX Y W X 1 2 3 XX : Identification code Y : Year 0~9 W : Week : A~Z : 1~26 week; a~z : 27~52 week; z represents 52 and 53 week X : A~Z : Green Device Package type Identification Code AP2181DW AP2191DW SOT25 SOT25 JE JF AP2181D/2191D Document number: DS32251 Rev. 1 - 2 13 of 18 www.diodes.com June 2010 © Diodes Incorporated AP2181D/AP2191D 1.5A SINGLE CHANNEL CURRENT-LIMITED POWER SWITCH WITH OUTPUT DISCHARGE Marking Information (Continued) (5) DFN2018-6 (Top View) XX : Identification Code Y : Year : 0~9 W : Week : A~Z : 1~26 week; a~z : 27~52 week; z represents 52 and 53 week X : A~Z : Green Device Package type Identification Code AP2181DFM AP2191DFM DFN2018-6 DFN2018-6 JE JF Package Outline Dimensions (All Dimensions in mm) 0.254 0.10/0.20 3.85/3.95 5.90/6.10 (1) Package type: SO-8 Gauge Plane Seating Plane 0.62/0.82 Detail "A" 7°~9° 0.15/0.25 1.30/1.50 1.75max. 0.35max. 45° 7°~9° Detail "A" 0°/8° 0.3/0.5 1.27typ 4.85/4.95 5.4 8x-0.60 6x-1.27 8x-1.55 NEW PRODUCT XX YWX Land Pattern Recommendation (Unit: mm) AP2181D/2191D Document number: DS32251 Rev. 1 - 2 14 of 18 www.diodes.com June 2010 © Diodes Incorporated AP2181D/AP2191D 1.5A SINGLE CHANNEL CURRENT-LIMITED POWER SWITCH WITH OUTPUT DISCHARGE Package Outline Dimensions (Continued) (2) Package type: MSOP-8 4.4 4.7/5.1 2.9/3.1 8x-0.45 8x-1.4 0.15Typ. Land Pattern Recommendation (Unit:mm) "A" 0.25 0.05/0.15 0.05 2.9/3.1 0/0.15 0.22/0.38 0.75/0.95 1 0.65Bsc. Gauge plane DETAIL "A" 0°/8 ° 0.4/0.8 0.95Ref. (3) Package type: MSOP-8-EP EXPOSED PAD (BOTTOM) 4.4 4.7/5.1 2.9/3.1 8x-0.45 8x-1.4 6x-0.65 1 Land Pattern Recommendation (Unit:mm) "A" 1 0.25 0.05 2.9/3.1 0.05/0.15 EXPOSED PAD (BOTTOM) Gauge plane 0.4/0.8 0.95Ref. 0°/8 ° 0.75/0.95 0.22/0.38 1.10Max. 0.15Typ. 1 0.65Bsc. 1.35/1.65 NEW PRODUCT 6x-0.65 DETAIL "A" 1.65/1.95 AP2181D/2191D Document number: DS32251 Rev. 1 - 2 15 of 18 www.diodes.com June 2010 © Diodes Incorporated AP2181D/AP2191D 1.5A SINGLE CHANNEL CURRENT-LIMITED POWER SWITCH WITH OUTPUT DISCHARGE Package Outline Dimensions (Continued) NEW PRODUCT (4) Package type: SOT25 0.13Typ Seating Plane Side View 1.75/1.875 B A CL 0.9/1.1 1.3/1.5 CL Pin #1 0.20 0.2/0.3 CL Pin #1 ID 1.95/2.075 CL C 1.20 2X0.25 A 0.08 C 6x-0.35 6X- 0/0.05 0.10 C 0.47/0.53 (5) Package type: DFN2018-6 4x-0.50 6x-0.25 1.600 Land Pattern Recommendation (Unit:mm) 2X- Top View 0.25 B 0.50Typ 0.15/0.25 0.10 C A B Bottom View AP2181D/2191D Document number: DS32251 Rev. 1 - 2 16 of 18 www.diodes.com June 2010 © Diodes Incorporated AP2181D/AP2191D 1.5A SINGLE CHANNEL CURRENT-LIMITED POWER SWITCH WITH OUTPUT DISCHARGE Taping Orientation (Note 7) NEW PRODUCT For DFN2018-6 Notes: 7. The taping orientation of the other package type can be found on our website at http://www.diodes.com/datasheets/ap02007.pdf AP2181D/2191D Document number: DS32251 Rev. 1 - 2 17 of 18 www.diodes.com June 2010 © Diodes Incorporated AP2181D/AP2191D 1.5A SINGLE CHANNEL CURRENT-LIMITED POWER SWITCH WITH OUTPUT DISCHARGE IMPORTANT NOTICE DIODES INCORPORATED MAKES NO WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, WITH REGARDS TO THIS DOCUMENT, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE (AND THEIR EQUIVALENTS UNDER THE LAWS OF ANY JURISDICTION). NEW PRODUCT Diodes Incorporated and its subsidiaries reserve the right to make modifications, enhancements, improvements, corrections or other changes without further notice to this document and any product described herein. Diodes Incorporated does not assume any liability arising out of the application or use of this document or any product described herein; neither does Diodes Incorporated convey any license under its patent or trademark rights, nor the rights of others. Any Customer or user of this document or products described herein in such applications shall assume all risks of such use and will agree to hold Diodes Incorporated and all the companies whose products are represented on Diodes Incorporated website, harmless against all damages. Diodes Incorporated does not warrant or accept any liability whatsoever in respect of any products purchased through unauthorized sales channel. Should Customers purchase or use Diodes Incorporated products for any unintended or unauthorized application, Customers shall indemnify and hold Diodes Incorporated and its representatives harmless against all claims, damages, expenses, and attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized application. Products described herein may be covered by one or more United States, international or foreign patents pending. Product names and markings noted herein may also be covered by one or more United States, international or foreign trademarks. LIFE SUPPORT Diodes Incorporated products are specifically not authorized for use as critical components in life support devices or systems without the express written approval of the Chief Executive Officer of Diodes Incorporated. As used herein: A. Life support devices or systems are devices or systems which: 1. are intended to implant into the body, or 2. support or sustain life and whose failure to perform when properly used in accordance with instructions for use provided in the labeling can be reasonably expected to result in significant injury to the user. B. A critical component is any component in a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or to affect its safety or effectiveness. Customers represent that they have all necessary expertise in the safety and regulatory ramifications of their life support devices or systems, and acknowledge and agree that they are solely responsible for all legal, regulatory and safety-related requirements concerning their products and any use of Diodes Incorporated products in such safety-critical, life support devices or systems, notwithstanding any devices- or systems-related information or support that may be provided by Diodes Incorporated. Further, Customers must fully indemnify Diodes Incorporated and its representatives against any damages arising out of the use of Diodes Incorporated products in such safety-critical, life support devices or systems. Copyright © 2010, Diodes Incorporated www.diodes.com AP2181D/2191D Document number: DS32251 Rev. 1 - 2 18 of 18 www.diodes.com June 2010 © Diodes Incorporated