! NEW Typical Applications • Harsh environments • Off-Road • Industrial • Medical • Transportation • Joystick control modules • Gaming • Military A Pushbutton Features/Benefits • IP67 sealed • 1,000,000 life cycle • Illumination / non-illumination • Multiple colored caps • Threaded or snap-in mounting • SPST, normally open • Caps available separately • RoHS compliant AP Series Industrial Pushbutton Switch Specifications Materials FUNCTION: SPST Momentary, double break CONTACT ARRANGEMENT: N.O. MOUNTING TYPE: Snap-in (panel front) or threaded (nut with locking washer and panel gasket) HOUSING: PBT BASE: PBT CAP: PBT ACTUATOR: Illuminated: Clear polycarbonate Non-illuminated: PBT INTERNAL SEAL: Silicone rubber TERMINALS: Copper alloy, gold over silver plating MOVABLE CONTACT: Copper alloy, gold over silver plating TERMINAL SEAL: Epoxy Mechanical TOTAL TRAVEL: 2.1 ± 0.2 mm OPERATING POINT 1.55 ± 0.25 mm OVER TRAVEL: 0.6 ± 0.2 mm OPERATING FORCE: 4N ± 0.5N standard configuration; other force option 2N ± 0.5N VIBRATION: 10-500 Hz 10g Max SHOCK: 60g 11ms sawtooth wave Operating Environment OPERATING TEMPERATURE: -40˚C to 85˚C (+105˚C non-illuminated) OPERATING LIFE: 1,000,000 cycles Electrical CONTACT RATING: 200mA @ 24 V DC resistive 100mA @ 50 V DC resistive 400mA @ 32 V AC resistive 125mA @ 125 V AC resistive DIELECTRIC STRENGTH: 1000 V AC min. INSULATION RESISTANCE: 1 G Ω @ 500 VDC INITIAL CONTACT RESISTANCE 50 mΩ max (without wire leads) BOUNCE TIME: <5 ms Process Environment SEALING: IP67 NOTE: Specifications and materials listed above are for switches with standard options. For information on specific and custom switches, please contact Customer Service. Build-A-Switch To order, simply select desired option from each category and place in the appropriate box. A P B E Designation AP Series AP Terminal Seal Epoxy E All models are epoxy sealed Operating Force 2 Newtons 2 4 4 Newtons Contact Material B Gold Actuator Style Dome / Convex D C Concave E Extended Dome N None Please contact Customer Service for additional colors and paint / laser etched button options. Actuator Color 0 No Cap 2 Black 3 Red 4 Orange 5 Yellow 6 Green Illumination 00 No LED* 01 Super White 02 Bi-color; Red (Green) 03 Red 05 Amber 06 Green 07 Super Blue 08 Bi-color; Amber (Green) * No LED available in short body only Termination Z Solder Lug W 12” Wire Leads 22 AWG C**** PC Terminals Bushing Style** S Snap-in plastic T*** Threaded plastic Metal threaded bushing available, contact Customer Service *** T bushing style includes: 1 lockwasher, 1 hex nut & 1 panel seal washer **** Illumination not available with PC Terminals Contact Customer Service for additional hardware options. ** Specifications and dimensions subject to change A–3 www.ck-components.com ! NEW AP Series Industrial Pushbutton Switch STANDARD VIEW Pushbutton A 28,00 [ 1.102 ] ELECTRICAL SCHEMATIC 10,90 [ 0.429 ] ø 12,35 [0.486] ø 17,40 [0.685] 4 4,20 [ 0.165 ] 1,50 [ 0.059 ] 1 3,90 [ 0.154 ] 3 8,80 [ 0.346 ] 5,45 [ 0.215 ] 7,74 [ 0.305 ] 1 2 4 2 3 SPST-NO SEE SCHEMATIC 4,50 [ 0.177 ] OPERATING FORCE OPTION CODE OPERATING FORCE 2 4 2 N, 200 g 4 N, 400 g ACTUATOR STYLE D E DOME / CONVEX C EXTENDED DOME 3,54 TYP [ 0.140 ] 0,65 [ 0.026 ] 3,54 TYP [ 0.140 ] 8,19 TYP [ 0.323 ] 7,74 TYP [ 0.305 ] 7,74 TYP [ 0.305 ] 1,64 TYP [ 0.065 ] CONCAVE 1,64 TYP [ 0.065 ] 3,99 TYP [ 0.157 ] 2,09 TYP [ 0.082 ] DOWN POSITION ACTUATOR COLOR OPTION CODE ACTUATOR COLOR 0 2 3 4 5 6 No Cap Black Red Orange Yellow Green For additional colors please contact Customer Service. Third Angle Projection Dimensions are shown: mm (inches) Specifications and dimensions subject to change A–4 www.ck-components.com ! NEW AP Series Industrial Pushbutton Switch ILLUMINATION A ILLUMINATION TYPE TYPICAL INTENSITY* MIN MAX PEAK WAVELENGTH 00 Model without illumination 01 LED Super White 4,000 5,000 02 LED Bi-Color – Red (Green) 10 20 03 LED Red 4 8 700 2.0 05 LED Amber 35 50 610 2.0 06 LED Green 35 50 565 2.0 (mcd) Vf Forward Voltage (nm) N/A N/A 3.5 N/A 2.0 635/565 07 LED Super Blue 800 1,500 470 3.8 08 LED Bi-Color – Amber (Green) 10 10 585/565 2.0 + Anode - Cathode *LED FORWARD CURRENT: 20 mA LED FORWARD VOLTAGE: see chart above LED REVERSE VOLTAGE: 5.0 V MAX * For information on specific and custom LED, please contact Customer Service. NOTE: 4 3 For bi-color LED’s the polarity must be reversed to alternate the color BUSHING STYLE S SNAP-IN 28,00 [ 1.102 ] 24,00 [ 0.945 ] 20,25 [ 0.797 ] 7,74 [ 0.305 ] SNAP-IN NO ILLUMINATION SNAP-IN WITH ILLUMINATION 1,50 [ 0.059 ] T 16,25 [ 0.640 ] 7,75 [ 0.305 ] 1,50 [ 0.059 ] THREADED PLASTIC M13 X 1.25-6g THREADED WITH ILLUMINATION M13 X 1.25-6g THREADED NO ILLUMINATION 0,85 [ 0.033 ] 0,85 [ 0.033 ] PANEL CUTOUT øA B PANEL THICKNESS 1 mm [0.039 in] 2 mm [0.079 in] 3 mm [0.118 in] THREADED BODY MIN PANEL THICKNESS 1 mm DIM A (± 0.05 mm) 13.70 mm [0.539 in] 13.80 mm [0.539 in] 13.90 mm [0.547 in] 13.70 mm [0.539 in] DIM B (± 0.05 mm) 13.00 mm [0.512 in] 13.00 mm [0.512 in] 13.10 mm [0.516 in] 13.00 mm [0.512 in] A 0.1mm min. chamfer on the leading edge of the mounting hole is recommended for snap-in version. A–5 Third Angle Projection Dimensions are shown: mm (inches) Specifications and dimensions subject to change www.ck-components.com Pushbutton OPTION CODE ! NEW AP Series Industrial Pushbutton Switch TERMINATION Pushbutton A Z SOLDER LUG LED TERMINAL CATHODE (-) 3,90 [0.154] 0,75 TYP [0.030] LED TERMINAL ANODE (+) 0,50 TYP [0.020] 6,44 TYP [0.254] 2,75 [0.108] 2,83 TYP [0.111] 2,83 TYP [0.111] 0,50 TYP [0.020] LED TERMINAL ANODE (+) 2,04 TYP [0.080] LED TERMINAL CATHODE (-) 5,65 TYP [0.222] C PC TERMINALS **** Illumination not available with PC Terminals 2,50 TYP [0.098] 0,50 [0.020] 0,70 [0.028] 5,65 TYP [0.222] 5,70 [0.224] 2X ø 1,00 [0.039] PCB HOLE PATTERN BOARD VIEW W 34,78 TYP [1.369] 12” WIRE LEADS 22 AWG 28,44 TYP [1.120] 27,04 TYP [1.065] 20,69 TYP [0.815] WIRE LEADS WITH POTTED BASE, SNAP-IN NO ILLUMINATION WIRE LEADS WITH POTTED BASE, SNAP-IN ILLUMINATION ø 11,11 [0.437] 304,81 [12.000] WIRELEADS 22 AWG STD ø 11,11 [0.437] 304,81 [12.000] WIRELEADS 22 AWG STD WIRE LEADS WITH POTTED BASE, THREADED NO ILLUMINATION WIRE LEADS WITH POTTED BASE, THREADED ILLUMINATION 304,81 [12.000] WIRELEADS 22 AWG STD 304,81 [12.000] WIRELEADS 22 AWG STD Third Angle Projection Dimensions are shown: mm (inches) Specifications and dimensions subject to change A–6 www.ck-components.com ! NEW AP Series Industrial Pushbutton Switch CONTACT MATERIAL GOLD A Pushbutton B OPTION CODE CONTACT MATERIAL Gold B TERMINAL SEAL E EPOXY All models are epoxy sealed HARDWARE LOCK WASHER Part Number 647D00000 HEX NUT 2.50 Part number 515D00000 ø17.25 17.32 REF ø15.00 M13 X 1.25-6H 13.82 0.77 15.00 PANEL SEAL Part Number 655D00000 See Detail A 4X 0.13 0.30 Detail A Scale 15:1 4X R 0.13 REF 0.56 REF 2 X ø 14.60 2 X ø 16.30 ø 17.00 ø 13.80 A A Caps available on next page Third Angle Projection Dimensions are shown: Inches mm (inches) (mm) Specifications and dimensions subject to change A-7 www.ck-components.com ! NEW AP Series Industrial Pushbutton Switch AVAILABLE CAPS Pushbutton A 481 X Cap Actuator Style Cap Color XX 00X Hole / No Hole OPTION CAP COLOR PART NUMBER HOLE 02 BLACK 481DXX000 NO 03 RED 481DXX001 YES DOME 04 ORANGE 481CXX000 NO CONCAVE 05 YELLOW 481CXX001 YES 06 GREEN 481EXX000 NO EXTENDED DOME 481EXX001 YES EXTENDED DOME ACTUATOR STYLE DOME CONCAVE ø 12.35 D ø 3.00 THRU HOLE DOME 6.25 6.10 ø 12.35 C ø 3.00 THRU HOLE CONCAVE 0.65 0.61 6.69 6.69 E ø12.35 EXTENDED DOME ø 3.00 THRU HOLE 6.15 6.10 Third Angle Projection Dimensions are shown: Inches (mm) Specifications and dimensions subject to change A–8 www.ck-components.com