3.0x2.0mm SMD CHIP LED LAMP APK3020SURC HYPER RED Features Description !3.0mmX2.0mm SMT LED, 1.3mm THICKNESS. The Hyper Red source color devices are made with !LOW POWER CONSUMPTION. DH InGaAlP on GaAs substrate Light Emitting Diode. !WIDE VIEWING ANGLE. !IDEAL FOR BACKLIGHT AND INDICATOR. ! VARIOUS COLORS AND LENS TYPES AVAILABLE. !PACKAGE:2000PCS/REEL Package Dimensions Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is ±0.2(0.0079") unless otherwise noted. 3. Specifications are subject to change without notice. SPEC NO: DSAD1137 APPROVED : J. Lu REV NO: V.1 CHECKED :Allen Liu DATE: MAR/24/2003 DRAWN: X.T.HU PAGE: 1 OF 4 Selection Guide Dic e Par t No . APK3020SURC Iv (m c d ) @ 20 m A L en s Ty p e HYPER RED ( InGaAIP) WATER CLEAR V i ew i n g An g l e Min . Ty p . 2θ1/2 70 23 0 12 0 ° Note: 1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value. Electrical / Optical Characteristics at T)=25°°C Sy m b o l Par am et er D ev i c e λpeak Peak Wavelength Hyper Red λD Dominate Wavelength ∆λ1/2 Ty p . Max . Un it s Tes t Co n d it io n s 640 nm I F =20mA Hyper Red 6 28 nm I F =20mA Spectral Line Half-width Hyper Red 27 nm I F =20mA C Capacitance Hyper Red 45 pF VF =0V;f=1MHz VF Forward Voltage Hyper Red 1.9 2.5 V I F =20mA IR Reverse Current Hyper Red 10 uA V R = 5V Absolute Maximum Ratings at T)=25°°C P ar am e t e r H y p e r R ed Un it s Power dissipation 170 mW DC Forward Current 30 mA Peak Forward Current [1] 185 mA Reverse Voltage 5 V Operating/Storage Temperature -40°C To +85°C Note: 1. 1/10 Duty Cycle, 0.1ms Pulse Width. SPEC NO: DSAD1137 APPROVED : J. Lu REV NO: V.1 CHECKED :Allen Liu DATE: MAR/24/2003 DRAWN: X.T.HU PAGE: 2 OF 4 Hyper Red SPEC NO: DSAD1137 APPROVED : J. Lu APK3020SURC REV NO: V.1 CHECKED :Allen Liu DATE: MAR/24/2003 DRAWN: X.T.HU PAGE: 3 OF 4 APK3020SURC SMT Reflow Soldering Instructions Number of reflow process shall be less than 2 times and cooling process to normal temperature is required between first and second soldering process. Recommended Soldering Pattern (Units : mm) Tape Specifications (Units : mm) SPEC NO: DSAD1137 APPROVED : J. Lu REV NO: V.1 CHECKED :Allen Liu DATE: MAR/24/2003 DRAWN: X.T.HU PAGE: 4 OF 4