APT10045B2LL
APT10045LLL
1000V 23A 0.450Ω
POWER MOS 7
R
MOSFET
B2LL
®
Power MOS 7 is a new generation of low loss, high voltage, N-Channel
enhancement mode power MOSFETS. Both conduction and switching
®
losses are addressed with Power MOS 7 by significantly lowering RDS(ON)
®
and Qg. Power MOS 7 combines lower conduction and switching losses
along with exceptionally fast switching speeds inherent with APT's
patented metal gate structure.
• Lower Input Capacitance
• Lower Miller Capacitance
• Lower Gate Charge, Qg
T-MAX™
TO-264
LLL
D
• Increased Power Dissipation
• Easier To Drive
• Popular T-MAX™ or TO-264 Package
G
S
MAXIMUM RATINGS
Symbol
VDSS
ID
All Ratings: TC = 25°C unless otherwise specified.
Parameter
Drain-Source Voltage
APT10045
UNIT
1000
Volts
23
Continuous Drain Current @ TC = 25°C
1
Amps
IDM
Pulsed Drain Current
VGS
Gate-Source Voltage Continuous
±30
Gate-Source Voltage Transient
±40
Total Power Dissipation @ TC = 25°C
565
Watts
Linear Derating Factor
4.52
W/°C
VGSM
PD
TJ,TSTG
92
-55 to 150
Operating and Storage Junction Temperature Range
TL
Lead Temperature: 0.063" from Case for 10 Sec.
IAR
Avalanche Current
EAR
Repetitive Avalanche Energy
EAS
Single Pulse Avalanche Energy
1
Volts
°C
300
23
(Repetitive and Non-Repetitive)
1
Amps
50
mJ
4
2500
STATIC ELECTRICAL CHARACTERISTICS
ID(on)
RDS(on)
IDSS
IGSS
VGS(th)
MIN
Drain-Source Breakdown Voltage (VGS = 0V, ID = 250µA)
On State Drain Current
2
(VDS > I D(on) x R DS(on) Max, VGS = 10V)
Drain-Source On-State Resistance
2
TYP
MAX
1000
Volts
23
Amps
(VGS = 10V, 11.5A)
0.450
Zero Gate Voltage Drain Current (VDS = 1000V, VGS = 0V)
100
Zero Gate Voltage Drain Current (VDS = 800V, VGS = 0V, TC = 125°C)
500
Gate-Source Leakage Current (VGS = ±30V, VDS = 0V)
Gate Threshold Voltage (VDS = VGS, ID = 2.5mA)
Ohms
µA
±100
nA
5
Volts
3
CAUTION: These Devices are Sensitive to Electrostatic Discharge. Proper Handling Procedures Should Be Followed.
APT Website - http://www.advancedpower.com
UNIT
3-2003
BVDSS
Characteristic / Test Conditions
050-7009 Rev C
Symbol
DYNAMIC CHARACTERISTICS
Symbol
APT10045B2LL - LLL
Test Conditions
Characteristic
MIN
TYP
Ciss
Input Capacitance
Coss
Output Capacitance
VDS = 25V
715
Reverse Transfer Capacitance
f = 1 MHz
120
VGS = 10V
154
VDD = 500V
26
Crss
Qg
Total Gate Charge
Qgs
Gate-Source Charge
Qgd
Gate-Drain ("Miller") Charge
td(on)
Turn-on Delay Time
tr
ID = 23A @ 25°C
td(off)
tf
5
VDD = 500V
ID = 23A @ 25°C
Eon
Turn-on Switching Energy
Eoff
Turn-off Switching Energy
Eon
Turn-on Switching Energy
Eoff
Turn-off Switching Energy
8
INDUCTIVE SWITCHING @ 25°C
6
639
VDD = 670V, VGS = 15V
ID = 23A, RG = 5Ω
380
INDUCTIVE SWITCHING @ 125°C
6
ns
30
RG = 1.6Ω
Fall Time
nC
10
VGS = 15V
Turn-off Delay Time
pF
97
RESISTIVE SWITCHING
Rise Time
UNIT
4350
VGS = 0V
3
MAX
µJ
1046
VDD = 670V VGS = 15V
ID = 23A, RG = 5Ω
451
SOURCE-DRAIN DIODE RATINGS AND CHARACTERISTICS
Symbol
MIN
Characteristic / Test Conditions
TYP
MAX
23
UNIT
IS
Continuous Source Current (Body Diode)
ISM
Pulsed Source Current
1
VSD
Diode Forward Voltage
2
t rr
Reverse Recovery Time (IS = -ID23A, dl S/dt = 100A/µs)
560
ns
Q
Reverse Recovery Charge (IS = -ID23A, dl S/dt = 100A/µs)
5.50
µC
rr
dv/
dt
Peak Diode Recovery
dv/
92
(Body Diode)
1.3
(VGS = 0V, IS = -ID23A)
dt
5
Amps
Volts
10
V/ns
MAX
UNIT
THERMAL CHARACTERISTICS
Symbol
Characteristic
MIN
RθJC
Junction to Case
RθJA
Junction to Ambient
TYP
0.22
40
1 Repetitive Rating: Pulse width limited by maximum junction
temperature
2 Pulse Test: Pulse width < 380 µs, Duty Cycle < 2%
3 See MIL-STD-750 Method 3471
4 Starting Tj = +25°C, L = 9.45mH, RG = 25Ω, Peak IL = 23A
5 dv/dt numbers reflect the limitations of the test circuit rather than the
device itself. IS ≤ -ID28A di/dt ≤ 700A/µs VR ≤ VDSS TJ ≤ 150°C
6 Eon includes diode reverse recovery. See figures 18, 20.
APT Reserves the right to change, without notice, the specifications and information contained herein.
0.9
0.20
0.7
0.15
0.5
Note:
PDM
Z JC, THERMAL IMPEDANCE (°C/W)
θ
050-7009 Rev C
3-2003
0.25
0.10
0.3
t2
0.1
SINGLE PULSE
0.05
0
t1
Duty Factor D = t1/t2
0.05
10-5
10-4
°C/W
Peak TJ = PDM x ZθJC + TC
10-3
10-2
10-1
RECTANGULAR PULSE DURATION (SECONDS)
FIGURE 1, MAXIMUM EFFECTIVE TRANSIENT THERMAL IMPEDANCE, JUNCTION-TO-CASE vs PULSE DURATION
1.0
Typical Performance Curves
APT10045B2LL - LLL
60
0.0893
Power
(Watts)
0.0842
0.0485
0.0102F
0.106F
0.979F
Case temperature
ID, DRAIN CURRENT (AMPERES)
RC MODEL
Junction
temp. ( ”C)
50
7V
VGS =15 & 8V
40
6.5V
30
6V
20
5.5V
10
5V
0
VDS> ID (ON) x RDS (ON)MAX.
250µSEC. PULSE TEST
@ <0.5 % DUTY CYCLE
60
50
40
30
20
TJ = +125°C
10
0
TJ = -55°C
TJ = +25°C
0
2
4
6
8
10
VGS, GATE-TO-SOURCE VOLTAGE (VOLTS)
FIGURE 4, TRANSFER CHARACTERISTICS
BVDSS, DRAIN-TO-SOURCE BREAKDOWN
VOLTAGE (NORMALIZED)
ID, DRAIN CURRENT (AMPERES)
25
20
15
10
5
0
25
I
D
V
1.30
1.20
VGS=10V
1.10
VGS=20V
1.00
0.90
0.80
0
10
20
30
40
50
ID, DRAIN CURRENT (AMPERES)
FIGURE 5, RDS(ON) vs DRAIN CURRENT
1.15
1.10
1.05
1.00
0.95
0.90
0.85
-50
1.2
= 11.5A
GS
= 10V
2.0
1.5
1.0
0.5
0.0
-50
NORMALIZED TO
= 10V @ 11.5A
GS
-25
0
25 50 75 100 125 150
TJ, JUNCTION TEMPERATURE (°C)
FIGURE 7, BREAKDOWN VOLTAGE vs TEMPERATURE
-25
0
25 50
75 100 125 150
TJ, JUNCTION TEMPERATURE (°C)
FIGURE 8, ON-RESISTANCE vs. TEMPERATURE
VGS(TH), THRESHOLD VOLTAGE
(NORMALIZED)
RDS(ON), DRAIN-TO-SOURCE ON RESISTANCE
(NORMALIZED)
50
75
100
125
150
TC, CASE TEMPERATURE (°C)
FIGURE 6, MAXIMUM DRAIN CURRENT vs CASE TEMPERATURE
2.5
V
1.1
1.0
0.9
0.8
3-2003
70
0.7
0.6
-50
-25
0
25 50 75 100 125 150
TC, CASE TEMPERATURE (°C)
FIGURE 9, THRESHOLD VOLTAGE vs TEMPERATURE
050-7009 Rev C
ID, DRAIN CURRENT (AMPERES)
80
RDS(ON), DRAIN-TO-SOURCE ON RESISTANCE
FIGURE 2, TRANSIENT THERMAL IMPEDANCE MODEL
0
5
10
15
20
25
30
VDS, DRAIN-TO-SOURCE VOLTAGE (VOLTS)
FIGURE 3, LOW VOLTAGE OUTPUT CHARACTERISTICS
1.40
APT10045B2LL - LLL
Typical Performance Curves
20,000
10,000
OPERATION HERE
LIMITED BY RDS (ON)
Ciss
100µS
10
TC =+25°C
TJ =+150°C
SINGLE PULSE
VGS, GATE-TO-SOURCE VOLTAGE (VOLTS)
16
= 23A
12
VDS=200V
VDS=500V
VDS=800V
8
Coss
Crss
100
10mS
1
10
100
1000
VDS, DRAIN-TO-SOURCE VOLTAGE (VOLTS)
FIGURE 10, MAXIMUM SAFE OPERATING AREA
D
1,000
1mS
1
I
C, CAPACITANCE (pF)
50
4
0
0
50
100
150
200
250
Qg, TOTAL GATE CHARGE (nC)
FIGURE 12, GATE CHARGES vs GATE-TO-SOURCE VOLTAGE
10
0
10
20
30
40
50
VDS, DRAIN-TO-SOURCE VOLTAGE (VOLTS)
FIGURE 11, CAPACITANCE vs DRAIN-TO-SOURCE VOLTAGE
200
IDR, REVERSE DRAIN CURRENT (AMPERES)
ID, DRAIN CURRENT (AMPERES)
92
100
TJ =+150°C
TJ =+25°C
10
1
0.3
0.5
0.7
0.9
1.1
1.3
1.5
VSD, SOURCE-TO-DRAIN VOLTAGE (VOLTS)
FIGURE 13, SOURCE-DRAIN DIODE FORWARD VOLTAGE
60
160
V
140
G
50
= 670V
= 5Ω
T = 125°C
tf
J
120
L = 100µH
V
100
DD
R
G
40
= 670V
tr and tf (ns)
td(on) and td(off) (ns)
DD
R
td(off)
= 5Ω
T = 125°C
J
80
L = 100µH
60
30
20
tr
40
10
td(on)
20
0
0
0
10
20
30
40
ID (A)
FIGURE 14, DELAY TIMES vs CURRENT
0
20
30
40
ID (A)
FIGURE 15, RISE AND FALL TIMES vs CURRENT
4000
2000
DD
R
G
= 670V
= 5Ω
SWITCHING ENERGY (µJ)
3-2003
J
1500
3500
Eon
T = 125°C
L = 100µH
E ON includes
diode reverse recovery.
1000
500
Eoff
0
SWITCHING ENERGY (µJ)
V
050-7009 Rev C
10
Eoff
3000
2500
Eon
2000
1500
V
I
1000
DD
D
= 670V
= 23A
T = 125°C
J
L = 100µH
E ON includes
500
diode reverse recovery.
0
0
5
10
15
20
25
30
35 40
ID (A)
FIGURE 16, SWITCHING ENERGY vs CURRENT
0
5
10 15 20 25 30 35 40 45 50
RG, GATE RESISTANCE (Ohms)
FIGURE 17, SWITCHING ENERGY VS. GATE RESISTANCE
APT10045B2LL - LLL
Gate Voltage
10 %
90%
Gate Voltage
T = 125 C
J
td(on)
T = 125 C
J
td(off)
tr
Drain Voltage
Drain Current
5%
90%
5%
90%
10%
Drain Voltage
10 %
Drain Current
0
tf
Switching Energy
Switching Energy
Figure 19, Turn-off Switching Waveforms and Definitions
Figure 18, Turn-on Switching Waveforms and Definitions
APT15DF120B
V CE
IC
V DD
G
D.U.T.
Figure 20, Inductive Switching Test Circuit
T-MAXTM (B2) Package Outline
4.69 (.185)
5.31 (.209)
1.49 (.059)
2.49 (.098)
TO-264 (L) Package Outline
4.60 (.181)
5.21 (.205)
1.80 (.071)
2.01 (.079)
15.49 (.610)
16.26 (.640)
19.51 (.768)
20.50 (.807)
3.10 (.122)
3.48 (.137)
5.38 (.212)
6.20 (.244)
5.79 (.228)
6.20 (.244)
0.40 (.016)
0.79 (.031)
2.29 (.090)
2.69 (.106)
1.65 (.065)
2.13 (.084)
19.81 (.780)
20.32 (.800)
1.01 (.040)
1.40 (.055)
2.21 (.087)
2.59 (.102)
2.87 (.113)
3.12 (.123)
19.81 (.780)
21.39 (.842)
Gate
Drain
Source
5.45 (.215) BSC
2-Plcs.
These dimensions are equal to the TO-247 without the mounting hole.
Dimensions in Millimeters and (Inches)
0.48 (.019)
0.84 (.033)
2.59 (.102)
3.00 (.118)
0.76 (.030)
1.30 (.051)
2.79 (.110)
3.18 (.125)
5.45 (.215) BSC
2-Plcs.
Dimensions in Millimeters and (Inches)
APT’s products are covered by one or more of U.S.patents 4,895,810 5,045,903 5,089,434 5,182,234 5,019,522
5,262,336 6,503,786 5,256,583 4,748,103 5,283,202 5,231,474 5,434,095 5,528,058 and foreign patents. US and Foreign patents pending. All Rights Reserved.
2.29 (.090)
2.69 (.106)
Gate
Drain
Source
3-2003
4.50 (.177) Max.
25.48 (1.003)
26.49 (1.043)
050-7009 Rev C
Drain
Drain
20.80 (.819)
21.46 (.845)