Kingbright APT1608RWF 1.6x0.8mm smd chip led lamp Datasheet

1.6X0.8mm SMD CHIP LED LAMP
PRELIMINARY SPEC
Part Number: APT1608RWF/A
WHITE
ATTENTION
OBSERVE PRECAUTIONS
FOR HANDLING
ELECTROSTATIC
DISCHARGE
SENSITIVE
DEVICES
Description
The source color devices are made with InGaN on SiC
Light Emitting Diode.
Static electricity and surge damage the LEDS.
Features
1.6mmX0.8mm SMT LED, 0.75mm THICKNESS.
It is recommended to use a wrist band or anti-electrostatic
LOW POWER CONSUMPTION.
glove when handling the LEDs.
W IDE VIEW ING ANGLE.
All devices, equipment and machinery must be electrically
IDEAL FOR BACKLIGHT AND INDICATOR.
grounded.
VARIOUS COLORS AND LENS TYPES AVAILABLE
MOISTURE SENSITIVITY LEVEL : LEVEL 3.
PACKAGE: 2000PCS / REEL .
ELECTROSTATIC DISCHARGE THRESHOLD (HBM):1000V.
TYP. COLOR TEMPERATURE:6500K
COLOR COORDINATES:X=0.31,Y=0.31 ACC. TO
CIE1931(WHITE).
Applications
traffic signaling.
backlighting (illuminated advertising , general lighting).
interior and exterior automotive lighting.
OPTICAL EFFICIENCY: 7.9 lm/W(TYP.)
COLOR REPRODUCTION INDEX:80
RoHS COMPLIANT.
substitution of micro incandescent lamps.
reading lamps.
signal and symbol luminaire for orientation.
marker lights (e.g. steps, exit ways, etc).
decorative and entertainment lighting.
indoor and outdoor commercial and residential
Package Dimensions
architectural lighting.
Notes:
1. All dimensions are in millimeters (inches).
2. Tolerance is ±0.1(0.004") unless otherwise noted.
3. Specifications are subject to change without notice.
4. The device has a single mounting surface. The device must be mounted according to the specifications.
SPEC NO: DSAG3636
REV NO: V.5
DATE: JUN/05/2007
PAGE: 1 OF 7
APPROVED: WYNEC
CHECKED: Allen Liu
DRAWN: Y.L.LI
ERP:1203005353
Selection Guide
Note2
Dice
Part No.
APT1608RWF/A
WHITE (InGaN)
luminous Intensity
Iv(mcd) @ 20 mA
Lens Type
Note3
v (mlm)
@ 20 mA
Viewing
Note1
Angle
Min.
Typ.
Typ.
2θ1/2
70
140
520
120°
YELLOW FLUORESCENT
Absolute Maximum Ratings at TA=25°C
Parameter
Symbol
Value
Unit
Power dissipation
Pt
120
mW
Reverse Voltage
VR
5
V
Junction temperature
TJ
110
°C
Operating Temperature
Top
-40 To +85
°C
Storage Temperature
Tstg
-40 To +100
°C
IF
30
mA
IFM
100
mA
Rth JA
Rth JS
400
150
°C/W
DC Forward Current
Peak Forward Current
Note4
Thermal resistance
Note5
Junction/ambient
Junction/solder point
Notes:
1.θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value.
2.Luminous intensity is measured by a current pulse of 10ms at a tolerance of ±15%.
3.The typical data of Luminous Flux can only reflect statistical figures, actual parameters of individual product could differ from the typical data.
For the purpose of product enhancement, the typical data is subject to change without prior notice.
4.1/10 Duty Cycle, 0.1ms Pulse Width.
5.Rth(J-A) Results from mounting on PC board FR4 (pad size≥16 mm 2 per pad),
Electrical / Optical Characteristics at TA=25°C
Parameter
Symbol
Chromaticity coordinate x acc.to CIE1931
IF=20mA [Typ.]
X
Chromaticity coordinate y acc.to CIE1931
IF=20mA [Typ.]
Y
Value
Unit
Note1
0.31
-
Note1
0.31
-
Forward Voltage IF=20mA [Min.]
Forward Voltage IF=20mA [Typ.]
Forward Voltage
2.7
VF
Note2
3.2
IF=20mA [Max.]
Reverse Current (VR=5V)
4.0
[Typ.]
0.01
IR
Reverse Current (VR=5V)
V
[Max.]
10
µA
Temperature coefficient of x
[Typ.]
IF=20mA, -10°C T 100°C
TC x
-0.1
10-3 / °C
Temperature coefficient of y
[Typ.]
IF=20mA, -10°C T 100°C
TCy
-0.2
10-3 / °C
Temperature coefficient of VF
IF=20mA, -10°C T 100°C
[Typ.]
TCV
-2.5
mV/ °C
Notes:
1.Chromaticity coordinates are measured by a current pulse of 20ms with a tolerance of ±0.01 in X and Y color coordinates.
2.Forward voltage is measured with a current pulse of 10ms at a tolerance of ±0.1V.
SPEC NO: DSAG3636
REV NO: V.5
DATE: JUN/05/2007
PAGE: 2 OF 7
APPROVED: WYNEC
CHECKED: Allen Liu
DRAWN: Y.L.LI
ERP:1203005353
Brightness codes
Note1
Note2
luminous Intensity
Iv(mcd) @ 20 mA
v (mlm)
@ 20 mA
Code.
Min.
Max.
Typ.
M
70
130
300
N
110
220
480
P
180
320
710
Q
280
420
960
Notes:
1.Luminous intensity is measured by a current pulse of 10ms at a tolerance of ±15%.
2.The typical data of Luminous Flux can only reflect statistical figures, actual parameters of individual product could differ from the
typical data. For the purpose of product enhancement, the typical data is subject to change without prior notice.
White
APT1608RWF/A
SPEC NO: DSAG3636
REV NO: V.5
DATE: JUN/05/2007
PAGE: 3 OF 7
APPROVED: WYNEC
CHECKED: Allen Liu
DRAWN: Y.L.LI
ERP:1203005353
APT1608RWF/A
SPEC NO: DSAG3636
REV NO: V.5
DATE: JUN/05/2007
PAGE: 4 OF 7
APPROVED: WYNEC
CHECKED: Allen Liu
DRAWN: Y.L.LI
ERP:1203005353
APT1608RWF/A
White CIE
0.44
0.42
0.40
c1
0.38
0.36
b4
c0
0.34
b1
b3
0.32
b2
0.30
a1
0.28
a0
0.26
0.24
0.22
0.22 0.24 0.26 0.28 0.30 0.32 0.34 0.36 0.38 0.40 0.42 0.44
a0
a1
X
0.264
0.283
0.296
0.280
X
0.248
0.275
0.283
0.264
Y
0.267
0.305
0.276
0.248
Y
0.286
0.321
0.305
0.267
Reference CCT: 14000~9000k
Reference CCT: 14000~9000k
b1
b2
X
0.283
0.330
0.330
0.287
X
0.287
0.330
0.330
0.296
Y
0.305
0.360
0.339
0.295
Y
0.295
0.339
0.318
0.276
Reference CCT: 9000~5600k
Reference CCT: 9000~5600k
b3
b4
X
0.275
0.298
0.306
0.283
X
0.298
0.321
0.330
0.306
Y
0.321
0.350
0.332
0.305
Y
0.350
0.379
0.360
0.332
Reference CCT: 9000~7000k
Reference CCT: 7600~5600k
c0
c1
X
0.330
0.361
0.356
0.330
X
0.321
0.366
0.361
0.330
Y
0.360
0.385
0.351
0.318
Y
0.379
0.419
0.385
0.360
Reference CCT: 5600~4600k
Reference CCT: 6000~4600k
SPEC NO: DSAG3636
REV NO: V.5
DATE: JUN/05/2007
PAGE: 5 OF 7
APPROVED: WYNEC
CHECKED: Allen Liu
DRAWN: Y.L.LI
ERP:1203005353
APT1608RWF/A
Recommended Soldering Pattern
(Units: mm ; Tolerance: ± 0.1)
Tape Specifications
(Units : mm)
Reel Dimension
SPEC NO: DSAG3636
REV NO: V.5
DATE: JUN/05/2007
PAGE: 6 OF 7
APPROVED: WYNEC
CHECKED: Allen Liu
DRAWN: Y.L.LI
ERP:1203005353
PACKING & LABEL SPECIFICATIONS
APT1608RWF/A
SPEC NO: DSAG3636
REV NO: V.5
DATE: JUN/05/2007
PAGE: 7 OF 7
APPROVED: WYNEC
CHECKED: Allen Liu
DRAWN: Y.L.LI
ERP:1203005353
Similar pages