Kingbright APT2012PBC 2.0x1.25mm smd chip led lamp Datasheet

2.0x1.25mm SMD CHIP LED LAMP
Part Number: APT2012PBC/A
PRELIMINARY SPEC
Blue
ATTENTION
OBSERVE PRECAUTIONS
FOR HANDLING
ELECTROSTATIC
DISCHARGE
SENSITIVE
DEVICES
Features
Description
z 2.0mmx1.25mm SMT LED,0.75mm THICKNESS.
The Blue source color devices are made with InGaN
z LOW POWER CONSUMPTION.
on SiC Light Emitting Diode.
z WIDE VIEWING ANGLE.
Static electricity and surge damage the LEDS.
z IDEAL FOR BACKLIGHT AND INDICATOR.
It is recommended to use a wrist band or anti-electrostatic
z VARIOUS COLORS AND LENS TYPES AVAILABLE.
glove when handling the LEDs.
z PACKAGE : 2000PCS / REEL.
All devices, equipment and machinery must be electrically
z MOISTURE SENSITIVITY LEVEL : LEVEL 3.
grounded.
z RoHS COMPLIANT.
Package Dimensions
Notes:
1. All dimensions are in millimeters (inches).
2. Tolerance is ±0.1(0.004") unless otherwise noted.
3. Specifications are subject to change without notice.
4. The device has a single mounting surface. The device must be mounted according to the specifications.
SPEC NO: DSAE5168
REV NO: V.7
APPROVED: WYNEC
CHECKED: Allen Liu
DATE: MAY/05/2007
DRAWN: Y.L.LI
PAGE: 1 OF 5
ERP: 1203003730
Selection Guide
Part No.
Dice
APT2012PBC/A
Lens Type
Blue (InGaN)
Viewing
Angle
[1]
Iv (mcd) [2]
@ 20mA
Min.
Typ.
2θ1/2
18
60
120°
WATER CLEAR
Notes:
1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value.
2. Luminous intensity/ luminous Flux: +/-15%.
Electrical / Optical Characteristics at TA=25°C
Symbol
Parameter
Device
Typ.
λpeak
Peak Wavelength
Blue
λD [1]
Dominant Wavelength
Δλ1/2
Max.
Units
Test Conditions
468
nm
IF=20mA
Blue
470
nm
IF=20mA
Spectral Line Half-width
Blue
21
nm
IF=20mA
C
Capacitance
Blue
100
pF
VF=0V;f=1MHz
VF [2]
Forward Voltage
Blue
3.2
4
V
IF=20mA
IR
Reverse Current
Blue
10
uA
VR=5V
Notes:
1.Wavelength: +/-1nm.
2. Forward Voltage: +/-0.1V.
Absolute Maximum Ratings at TA=25°C
Parameter
Blue
Units
Power dissipation
120
mW
DC Forward Current
30
mA
Peak Forward Current [1]
100
mA
5
V
Reverse Voltage
Operating Temperature
-40°C To +85°C
Storage Temperature
-40°C To +85°C
Note:
1. 1/10 Duty Cycle, 0.1ms Pulse Width.
SPEC NO: DSAE5168
REV NO: V.7
APPROVED: WYNEC
CHECKED: Allen Liu
DATE: MAY/05/2007
DRAWN: Y.L.LI
PAGE: 2 OF 5
ERP: 1203003730
Blue
APT2012PBC/A
SPEC NO: DSAE5168
REV NO: V.7
APPROVED: WYNEC
CHECKED: Allen Liu
DATE: MAY/05/2007
DRAWN: Y.L.LI
PAGE: 3 OF 5
ERP: 1203003730
APT2012PBC/A
Recommended Soldering Pattern
(Units : mm; Tolerance: ± 0.1)
Tape Specifications
(Units : mm)
SPEC NO: DSAE5168
REV NO: V.7
APPROVED: WYNEC
CHECKED: Allen Liu
DATE: MAY/05/2007
DRAWN: Y.L.LI
PAGE: 4 OF 5
ERP: 1203003730
PACKING & LABEL SPECIFICATIONS
SPEC NO: DSAE5168
REV NO: V.7
APPROVED: WYNEC
CHECKED: Allen Liu
APT2012PBC/A
DATE: MAY/05/2007
DRAWN: Y.L.LI
PAGE: 5 OF 5
ERP: 1203003730
Similar pages