Microsemi APT6M100K N-channel mosfet Datasheet

APT6M100K
1000V, 6A, 2.50Ω MAX
N-Channel MOSFET
Power MOS 8™ is a high speed, high voltage N-channel switch-mode power MOSFET.
A proprietary planar stripe design yields excellent reliability and manufacturability. Low
switching loss is achieved with low input capacitance and ultra low Crss "Miller" capacitance. The intrinsic gate resistance and capacitance of the poly-silicon gate structure
help control slew rates during switching, resulting in low EMI and reliable paralleling,
even when switching at very high frequency. Reliability in flyback, boost, forward, and
other circuits is enhanced by the high avalanche energy capability.
D
APT6M100K
Single die MOSFET
G
S
TYPICAL APPLICATIONS
FEATURES
• Fast switching with low EMI/RFI
• PFC and other boost converter
• Low RDS(on)
• Buck converter
• Ultra low Crss for improved noise immunity
• Two switch forward (asymmetrical bridge)
• Low gate charge
• Single switch forward
• Avalanche energy rated
• Flyback
• RoHS compliant
• Inverters
Absolute Maximum Ratings
Symbol
ID
Parameter
Unit
Ratings
Continuous Drain Current @ TC = 25°C
6
Continuous Drain Current @ TC = 100°C
4
A
IDM
Pulsed Drain Current
VGS
Gate-Source Voltage
±30
V
EAS
Single Pulse Avalanche Energy 2
310
mJ
IAR
Avalanche Current, Repetitive or Non-Repetitive
3
A
1
20
Thermal and Mechanical Characteristics
Min
Characteristic
Typ
Max
Unit
W
PD
Total Power Dissipation @ TC = 25°C
225
RθJC
Junction to Case Thermal Resistance
0.56
RθCS
Case to Sink Thermal Resistance, Flat, Greased Surface
Operating and Storage Junction Temperature Range
150
°C
TL
Soldering Temperature for 10 Seconds (1.6mm from case)
WT
Package Weight
Torque
-55
300
0.07
oz
1.2
g
10
in·lbf
1.1
N·m
Mounting Torque ( TO-220 Package), 4-40 or M3 screw
MicrosemiWebsite-http://www.microsemi.com
Rev B 5-2009
TJ,TSTG
°C/W
0.11
050-8110
Symbol
Static Characteristics
TJ = 25°C unless otherwise specified
Symbol
Parameter
VBR(DSS)
Drain-Source Breakdown Voltage
ΔVBR(DSS)/ΔTJ
Breakdown Voltage Temperature Coefficient
RDS(on)
Drain-Source On Resistance
VGS(th)
Gate-Source Threshold Voltage
ΔVGS(th)/ΔTJ
IGSS
Gate-Source Leakage Current
Dynamic Characteristics
Symbol
VDS = 1000V
VGS = 0V
Forward Transconductance
Ciss
Input Capacitance
Crss
Reverse Transfer Capacitance
Coss
Output Capacitance
Typ
Max
1.15
2.05
4
-10
2.50
5
TJ = 25°C
100
500
±100
TJ = 125°C
VGS = ±30V
Unit
V
V/°C
Ω
V
mV/°C
µA
nA
TJ = 25°C unless otherwise specified
Parameter
gfs
3
VGS = VDS, ID = 0.5mA
Threshold Voltage Temperature Coefficient
Zero Gate Voltage Drain Current
Min
1000
VGS = 10V, ID = 3A
3
IDSS
Test Conditions
VGS = 0V, ID = 250µA
Reference to 25°C, ID = 250µA
APT6M100K
Min
Test Conditions
VDS = 50V, ID = 3A
VGS = 0V, VDS = 25V
f = 1MHz
Co(cr)
4
Effective Output Capacitance, Charge Related
Co(er)
5
Effective Output Capacitance, Energy Related
Typ
5.6
1410
19
120
Max
Unit
S
pF
48
VGS = 0V, VDS = 0V to 667V
25
Qg
Total Gate Charge
Qgs
Gate-Source Charge
Qgd
Gate-Drain Charge
td(on)
Turn-On Delay Time
Resistive Switching
Current Rise Time
VDD = 667V, ID = 3A
tr
td(off)
tf
Turn-Off Delay Time
43
8
21
6.4
5.8
22
5.4
VGS = 0 to 10V, ID = 3A,
VDS = 500V
RG = 10Ω 6 , VGG = 15V
Current Fall Time
nC
ns
Source-Drain Diode Characteristics
Symbol
IS
ISM
Parameter
Continuous Source Current
(Body Diode)
Pulsed Source Current
(Body Diode) 1
VSD
Diode Forward Voltage
trr
Reverse Recovery Time
Qrr
Reverse Recovery Charge
dv/dt
Peak Recovery dv/dt
Test Conditions
MOSFET symbol
showing the
integral reverse p-n
junction diode
(body diode)
Min
Typ
D
Max
Unit
6
A
G
20
S
ISD = 3A, TJ = 25°C, VGS = 0V
ISD = 3A, VDD = 100V 3
diSD/dt = 100A/µs, TJ = 25°C
ISD ≤ 3A, di/dt ≤1000A/µs, VDD = 667V,
TJ = 125°C
1.3
1025
17
V
ns
µC
10
V/ns
1 Repetitive Rating: Pulse width and case temperature limited by maximum junction temperature.
2 Starting at TJ = 25°C, L = 68.89mH, RG = 25Ω, IAS = 3A.
3 Pulse test: Pulse Width < 380µs, duty cycle < 2%.
050-8110
Rev B 5-2009
4 Co(cr) is defined as a fixed capacitance with the same stored charge as COSS with VDS = 67% of V(BR)DSS.
5 Co(er) is defined as a fixed capacitance with the same stored energy as COSS with VDS = 67% of V(BR)DSS. To calculate Co(er) for any value of
VDS less than V(BR)DSS, use this equation: Co(er) = -4.09E-8/VDS^2 + 7.21E-9/VDS + 1.40E-11.
6 RG is external gate resistance, not including internal gate resistance or gate driver impedance. (MIC4452)
Microsemi reserves the right to change, without notice, the specifications and information contained herein.
APT6M100K
6
16
V
GS
= 10V
T = 125°C
J
14
5
ID, DRIAN CURRENT (A)
ID, DRAIN CURRENT (A)
TJ = -55°C
12
10
8
TJ = 25°C
6
4
TJ = 125°C
2
V
= 6, 7, 8 & 9V
GS
4
3
5V
2
1
4.5V
TJ = 150°C
0
0
0
5
10
15
20
25
30
VDS(ON), DRAIN-TO-SOURCE VOLTAGE (V)
0
Figure 2, Output Characteristics
20
NORMALIZED TO
VDS> ID(ON) x RDS(ON) MAX.
18
VGS = 10V @ 3A
2.5
2.0
1.5
1.0
0.5
14
12
10
TJ = -55°C
8
TJ = 25°C
6
TJ = 125°C
4
2
0
0
-55 -25
0
25 50 75 100 125 150
TJ, JUNCTION TEMPERATURE (°C)
Figure 3, RDS(ON) vs Junction Temperature
0
1
2
3
4
5
6
7
8
VGS, GATE-TO-SOURCE VOLTAGE (V)
Figure 4, Transfer Characteristics
3,000
8
7
1,000
TJ = -55°C
6
C, CAPACITANCE (pF)
TJ = 25°C
5
TJ = 125°C
4
3
2
Ciss
100
Coss
10
Crss
1
VGS, GATE-TO-SOURCE VOLTAGE (V)
16
0.5
1.0 1.5
2.0 2.5
3.0
ID, DRAIN CURRENT (A)
Figure 5, Gain vs Drain Current
200
400
600
800
1000
VDS, DRAIN-TO-SOURCE VOLTAGE (V)
Figure 6, Capacitance vs Drain-to-Source Voltage
12
VDS = 200V
10
VDS = 500V
8
6
VDS = 800V
4
2
0
0
20
ID = 3A
14
0
1
3.5
10
20
30
40
50
60
Qg, TOTAL GATE CHARGE (nC)
Figure 7, Gate Charge vs Gate-to-Source Voltage
18
16
14
TJ = 25°C
12
10
TJ = 150°C
8
6
4
2
0
0
0.3
0.6
0.9
1.2
1.5
VSD, SOURCE-TO-DRAIN VOLTAGE (V)
Figure 8, Reverse Drain Current vs Source-to-Drain Voltage
Rev B 5-2009
0
ISD, REVERSE DRAIN CURRENT (A)
0
050-8110
gfs, TRANSCONDUCTANCE
250µSEC. PULSE TEST
@ <0.5 % DUTY CYCLE
16
ID, DRAIN CURRENT (A)
RDS(ON), DRAIN-TO-SOURCE ON RESISTANCE
Figure 1, Output Characteristics
3.0
5
10
15
20
25
30
VDS, DRAIN-TO-SOURCE VOLTAGE (V)
APT6M100K
40
IDM
10
ID, DRAIN CURRENT (A)
ID, DRAIN CURRENT (A)
40
13µs
100µs
1
1ms
10ms
Rds(on)
0.1
Rds(on)
13µs
100µs
1ms
10ms
TJ = 150°C
100ms
TC = 25°C
DC line
Scaling for Different Case & Junction
Temperatures:
ID = ID(T = 25°C)*(TJ - TC)/125
1
100ms
TJ = 125°C
TC = 75°C
1
IDM
10
DC line
0.1
10
100
1000
VDS, DRAIN-TO-SOURCE VOLTAGE (V)
Figure 9, Forward Safe Operating Area
C
1
10
100
1000
VDS, DRAIN-TO-SOURCE VOLTAGE (V)
Figure 10, Maximum Forward Safe Operating Area
D = 0.9
0.50
0.40
0.7
0.30
0.5
Note:
PDM
ZθJC, THERMAL IMPEDANCE (°C/W)
0.60
0.20
0.3
t2
t1 = Pulse Duration
SINGLE PULSE
0.10
t
Duty Factor D = 1/t2
Peak TJ = PDM x ZθJC + TC
0.1
0.05
0
t1
10-5
10-4
10-3
10-2
10-1
RECTANGULAR PULSE DURATION (seconds)
Figure 11. Maximum Effective Transient Thermal Impedance Junction-to-Case vs Pulse Duration
TO-220 (K) Package Outline
e3 100% Sn Plated
050-8110
Rev B 5-2009
Drain
Gate
Drain
Source
Dimensions in Inches and (Millimeters)
Microsemi's products are covered by one or more of U.S.patents 4,895,810 5,045,903 5,089,434 5,182,234 5,019,522 5,262,336 6,503,786
5,256,583 4,748,103 5,283,202 5,231,474 5,434,095 5,528,058 and foreign patents. US and Foreign patents pending. All Rights Reserved.
1.0
Similar pages