ADPOW APT75DQ60S Ultrafast soft recovery rectifier diode Datasheet

600V 75A
APT75DQ60B
APT75DQ60S
APT75DQ60BG*
APT75DQ60SG*
®
*G Denotes RoHS Compliant, Pb Free Terminal Finish.
ULTRAFAST SOFT RECOVERY RECTIFIER DIODE
(B)
PRODUCT APPLICATIONS
PRODUCT FEATURES
PRODUCT BENEFITS
• Anti-Parallel Diode
-Switchmode Power Supply
-Inverters
• Free Wheeling Diode
-Motor Controllers
-Converters
-Inverters
• Snubber Diode
• Ultrafast Recovery Times
• Low Losses
• Soft Recovery Characteristics
• Low Noise Switching
• PFC
• Avalanche Energy Rated
-2 4
7
D3PAK
1
2
• Cooler Operation
• Popular TO-247 Package or
Surface Mount D3PAK Package
• Higher Reliability Systems
• Low Forward Voltage
• Low Leakage Current
TO
2
1
(S)
2
1
• Increased System Power
Density
1 - Cathode
2 - Anode
Back of Case - Cathode
MAXIMUM RATINGS
Symbol
VR
All Ratings: TC = 25°C unless otherwise specified.
Characteristic / Test Conditions
UNIT
600
Volts
Maximum D.C. Reverse Voltage
VRRM
Maximum Peak Repetitive Reverse Voltage
VRWM
Maximum Working Peak Reverse Voltage
IF(AV)
Maximum Average Forward Current (TC = 108°C, Duty Cycle = 0.5)
IF(RMS)
APT75DQ60B(G)_S(G)
75
RMS Forward Current (Square wave, 50% duty)
117
IFSM
Non-Repetitive Forward Surge Current (TJ = 45°C, 8.3ms)
600
EAVL
Avalanche Energy (1A, 40mH)
TJ,TSTG
TL
Amps
20
mJ
-55 to 175
Operating and StorageTemperature Range
°C
300
Lead Temperature for 10 Sec.
STATIC ELECTRICAL CHARACTERISTICS
Forward Voltage
IRM
Maximum Reverse Leakage Current
CT
Junction Capacitance, VR = 200V
MIN
TYP
MAX
IF = 75A
2.0
2.5
IF = 150A
2.4
IF = 75A, TJ = 125°C
1.7
VR = 600V
APT Website - http://www.advancedpower.com
Volts
25
VR = 600V, TJ = 125°C
500
110
UNIT
µA
pF
8-2005
VF
Characteristic / Test Conditions
053-4209 Rev C
Symbol
APT75DQ60B(G)_S(G)
DYNAMIC CHARACTERISTICS
Symbol
Characteristic
Test Conditions
trr
Reverse Recovery Time
trr
Reverse Recovery Time
Qrr
Reverse Recovery Charge
IRRM
IF = 1A, diF/dt = -100A/µs, VR = 30V, TJ = 25°C
Reverse Recovery Time
Qrr
Reverse Recovery Charge
IF = 75A, diF/dt = -200A/µs
VR = 400V, TC = 125°C
Maximum Reverse Recovery Current
trr
Reverse Recovery Time
Qrr
Reverse Recovery Charge
IRRM
VR = 400V, TC = 25°C
Maximum Reverse Recovery Current
trr
IRRM
IF = 75A, diF/dt = -200A/µs
IF = 75A, diF/dt = -1000A/µs
VR = 400V, TC = 125°C
Maximum Reverse Recovery Current
MIN
TYP
MAX
UNIT
-
29
-
31
-
55
-
4
-
140
ns
-
650
nC
-
9
-
90
ns
-
1300
nC
-
27
Amps
MIN
TYP
ns
nC
-
-
Amps
Amps
THERMAL AND MECHANICAL CHARACTERISTICS
Symbol
RθJC
WT
Torque
Characteristic / Test Conditions
MAX
UNIT
.34
°C/W
Junction-to-Case Thermal Resistance
Package Weight
0.22
oz
5.9
g
Maximum Mounting Torque
10
lb•in
1.1
N•m
APT Reserves the right to change, without notice, the specifications and information contained herein.
D = 0.9
0.30
0.25
0.7
0.20
0.5
Note:
0.15
0.3
0.10
t2
Duty Factor D = 1/t2
Peak TJ = PDM x ZθJC + TC
0.1
SINGLE PULSE
0.05
10
-5
10
10-3
10-2
10-1
1.0
RECTANGULAR PULSE DURATION (seconds)
FIGURE 1a. MAXIMUM EFFECTIVE TRANSIENT THERMAL IMPEDANCE, JUNCTION-TO-CASE vs. PULSE DURATION
-4
8-2005
RC MODEL
053-4209 Rev C
t1
t
0.05
0
PDM
Z JC, THERMAL IMPEDANCE (°C/W)
θ
0.35
Junction
temp (°C)
0.129
0.0107
0.211
0.120
Power
(watts)
Case temperature (°C)
FIGURE 1b, TRANSIENT THERMAL IMPEDANCE MODEL
180
180
160
160
140
120
100
TJ = 125°C
80
60
TJ = 25°C
TJ = 175°C
40
TJ = -55°C
20
0
0
0.5
1
1.5
2
2.5
VF, ANODE-TO-CATHODE VOLTAGE (V)
Figure 2. Forward Current vs. Forward Voltage
Qrr, REVERSE RECOVERY CHARGE
(nC)
1800
T = 125°C
J
V = 400V
1600
R
1400
150A
1200
75A
1000
800
37.5A
600
400
200
0
0
200
400
600
800 1000 1200
-diF /dt, CURRENT RATE OF CHANGE (A/µs)
Figure 4. Reverse Recovery Charge vs. Current Rate of Change
trr, REVERSE RECOVERY TIME
(ns)
200
140
75A
120
37.5A
100
80
60
40
0
200
400
600
800 1000 1200
-diF /dt, CURRENT RATE OF CHANGE(A/µs)
Figure 3. Reverse Recovery Time vs. Current Rate of Change
30
T = 125°C
J
V = 400V
25
37.5A
20
15
10
75A
5
0
200
400
600
800 1000 1200
-diF /dt, CURRENT RATE OF CHANGE (A/µs)
Figure 5. Reverse Recovery Current vs. Current Rate of Change
Qrr
IRRM
0.8
trr
0.6
0.4
Qrr
Duty cycle = 0.5
T = 175°C
J
120
trr
1.0
150A
R
0
100
IF(AV) (A)
Kf, DYNAMIC PARAMETERS
(Normalized to 1000A/µs)
R
140
1.2
T = 125°C
J
V = 400V
150A
0
1.4
80
60
40
20
0.2
0.0
APT75DQ60B(G)_S(G)
20
IRRM, REVERSE RECOVERY CURRENT
(A)
IF, FORWARD CURRENT
(A)
TYPICAL PERFORMANCE CURVES
0
25
50
75
100
125
150
TJ, JUNCTION TEMPERATURE (°C)
Figure 6. Dynamic Parameters vs. Junction Temperature
0
25
50
75
100
125
150
175
Case Temperature (°C)
Figure 7. Maximum Average Forward Current vs. CaseTemperature
500
400
8-2005
300
200
100
0
1
10
100 200
VR, REVERSE VOLTAGE (V)
Figure 8. Junction Capacitance vs. Reverse Voltage
053-4209 Rev C
CJ, JUNCTION CAPACITANCE
(pF)
600
APT75DQ60B(G)_S(G)
Vr
diF /dt Adjust
+18V
APT60GT60BR
0V
D.U.T.
30µH
trr/Qrr
Waveform
PEARSON 2878
CURRENT
TRANSFORMER
Figure 9. Diode Test Circuit
1
IF - Forward Conduction Current
2
diF /dt - Rate of Diode Current Change Through Zero Crossing.
3
IRRM - Maximum Reverse Recovery Current.
4
trr - Reverse Recovery Time, measured from zero crossing where diode
current goes from positive to negative, to the point at which the straight
line through IRRM and 0.25 IRRM passes through zero.
1
4
6
Zero
5
5
Qrr - Area Under the Curve Defined by IRRM and trr.
6
diM/dt - Maximum Rate of Current Increase During the Trailing Portion of trr.
0.25 IRRM
3
Slope = diM/dt
2
Figure 10, Diode Reverse Recovery Waveform and Definitions
3
D PAK Package Outline
TO-247 Package Outline
15.49 (.610)
16.26 (.640)
6.15 (.242) BSC
5.38 (.212)
6.20 (.244)
4.90 (.193)
5.10 (.201)
1.45 (.057)
1.60 (.063)
20.80 (.819)
21.46 (.845)
Cathode
8-2005
053-4209 Rev C
e3 100% Sn
Cathode
(Heat Sink)
e1 SAC: Tin, Silver, Copper
4.69 (.185)
5.31 (.209)
1.49 (.059)
2.49 (.098)
0.40 (.016)
0.65 (.026)
4.50 (.177) Max.
19.81 (.780)
20.32 (.800)
1.65 (.065)
2.13 (.084)
1.01 (.040)
1.40 (.055)
1.00 (.039)
1.15(.045)
12.40 (.488)
12.70 (.500)
0.020 (.001)
0.250 (.010)
2.70 (.106)
2.90 (.114)
1.15 (.045)
1.45 (.057)
1.20 (.047)
1.90 (.075) 1.40 (.055)
2.10 (.083)
5.45 (.215) BSC
(2 Plcs.)
Anode
2.21 (.087)
2.59 (.102)
13.30 (.524)
13.60(.535)
18.70 (.736)
19.10 (.752)
3.50 (.138)
3.81 (.150)
0.40 (.016)
0.79 (.031)
15.85 (.624)
16.05(.632)
Cathode
10.90 (.430) BSC
Dimensions in Millimeters and (Inches)
2.40 (.094)
2.70 (.106)
(Base of Lead)
Heat Sink (Cathode)
and Leads
are Plated
Anode
Cathode
Dimensions in Millimeters (Inches)
APT’s products are covered by one or more of U.S.patents 4,895,810 5,045,903 5,089,434 5,182,234 5,019,522
5,262,336 6,503,786 5,256,583 4,748,103 5,283,202 5,231,474 5,434,095 5,528,058 and foreign patents. US and Foreign patents pending. All Rights Reserved.
Similar pages