ATMEL AT93C57W-10SI 3-wire serial eeprom Datasheet

Features
• Low Voltage and Standard Voltage Operation
•
•
•
•
•
•
•
– 5.0 (VCC = 4.5V to 5.5V)
– 2.7 (VCC = 2.7V to 5.5V)
– 2.5 (VCC = 2.5V to 5.5V)
– 1.8 (VCC = 1.8V to 5.5V)
User Selectable Internal Organization
– 1K: 128 x 8 or 64 x 16
– 2K: 256 x 8 or 128 x 16
– 4K: 512 x 8 or 256 x 16
3-Wire Serial Interface
2 MHz Clock Rate (5V) Compatibility
Self-Timed Write Cycle (10 ms max)
High Reliability
– Endurance: 1 Million Write Cycles
– Data Retention: 100 Years
– ESD Protection: >4000V
Automotive Grade and Extended Temperature Devices Available
8-Pin PDIP, 8-Pin JEDEC and EIAJ SOIC, and 8-Pin TSSOP Packages
3-Wire Serial
EEPROMs
1K (128 x 8 or 64 x 16)
2K (256 x 8 or 128 x 16)
4K (512 x 8 or 256 x 16)
Description
The AT93C46/56/57/66 provides 1024/2048/4096 bits of serial electrically erasable
programmable read only memory (EEPROM) organized as 64/128/256 words of 16
bits each, when the ORG Pin is connected to VCC and 128/256/512 words of 8 bits
each when it is tied to ground. The device is optimized for use in many industrial and
commercial applications where low power and low voltage operations are essential.
The AT93C46/56/57/66 is available in space saving 8-pin PDIP and 8-pin JEDEC and
EIAJ SOIC packages.
(continued)
Pin Configurations
AT93C46
AT93C56
AT93C57
AT93C66
8-Pin PDIP
Pin Name
Function
CS
Chip Select
SK
Serial Data Clock
DI
Serial Data Input
DO
Serial Data Output
GND
Ground
VCC
Power Supply
ORG
Internal Organization
DC
Don’t Connect
CS
SK
DI
DO
1
2
3
4
8
7
6
5
VCC
DC
ORG
GND
8-Pin SOIC
CS
SK
DI
DO
8-Pin SOIC
Rotated (R)
(1K JEDEC Only)
1
2
3
4
8
7
6
5
3-Wire, 1K
Serial E2PROM
VCC
DC
ORG
GND
8-Pin TSSOP
DC
VCC
CS
SK
1
2
3
4
8
7
6
5
ORG
GND
DO
DI
CS
SK
DI
DO
1
2
3
4
8
7
6
5
VCC
DC
ORG
GND
Rev. 0172K–07/98
1
The AT93C46/56/57/66 is enabled through the Chip Select
pin (CS), and accessed via a 3-wire serial interface consisting of Data Input (DI), Data Output (DO), and Shift Clock
(SK). Upon receiving a READ instruction at DI, the address
is decoded and the data is clocked out serially on the data
output pin DO. The WRITE cycle is completely self-timed
and no separate ERASE cycle is required before WRITE.
The WRITE cycle is only enabled when the part is in the
ERASE/WRITE ENABLE state. When CS is brought “high”
following the initiation of a WRITE cycle, the DO pin outputs the READY/BUSY status of the part.
The AT93C46 is available in 4.5V to 5.5V, 2.7V to 5.5V,
2.5V to 5.5V, and 1.8V to 5.5V versions. The
AT93C56/57/66 is available in 4.5V to 5.5V, 2.7V to 5.5V,
and 2.5V to 5.5V versions.
Absolute Maximum Ratings*
Operating Temperature .................................. -55°C to +125°C
Storage Temperature ..................................... -65°C to +150°C
Voltage on Any Pin
with Respect to Ground .....................................-1.0V to +7.0V
Maximum Operating Voltage........................................... 6.25V
*NOTICE:
Stresses beyond those listed under “Absolute
Maximum Ratings” may cause permanent damage to the device. This is a stress rating only and
functional operation of the device at these or any
other conditions beyond those indicated in the
operational sections of this specification is not
implied. Exposure to absolute maximum rating
conditions for extended periods may affect
device reliability
DC Output Current........................................................ 5.0 mA
Block Diagram
Note:
2
1.
When the ORG pin is connected to VCC, the x 16 organization is selected. When it is connected to ground, the x 8 organization is selected. If the ORG pin is left unconnected, then an internal pullup device (of approximately 1 MΩ) will select the x
16 organization. This feature is not available on 1.8V devices.
AT93C46/56/57/66
AT93C46/56/57/66
Pin Capacitance(1)
Applicable over recommended operating range from TA = 25°C, f = 1.0 MHz, VCC = +5.0V (unless otherwise noted).
Test Conditions
Max
Units
Conditions
COUT
Output Capacitance (DO)
5
pF
VOUT = 0V
CIN
Input Capacitance (CS, SK, DI)
5
pF
VIN = 0V
Note:
1. This parameter is characterized and is not 100% tested.
DC Characteristics
Applicable over recommended operating range from: TAI = -40°C to +85°C, VCC = +1.8V to +5.5V,
TAC = 0°C to +70°C, VCC = +1.8V to +5.5V (unless otherwise noted).
Symbol
Parameter
VCC1
Supply Voltage
VCC2
Test Condition
Max
Unit
1.8
5.5
V
Supply Voltage
2.5
5.5
V
VCC3
Supply Voltage
2.7
5.5
V
VCC4
Supply Voltage
4.5
5.5
V
ICC
Supply Current
VCC = 5.0V
Min
Typ
READ at 1.0 MHz
0.5
2.0
mA
WRITE at 1.0 MHz
0.5
2.0
mA
ISB1
Standby Current
VCC = 1.8V
CS = 0V
0
0.1
µA
ISB2
Standby Current
VCC = 2.5V
CS = 0V
6.0
10.0
µA
ISB3
Standby Current
VCC = 2.7V
CS = 0V
6.0
10.0
µA
ISB4
Standby Current
VCC = 5.0V
CS = 0V
17
30
µA
IIL
Input Leakage
VIN = 0V to VCC
0.1
1.0
µA
IOL
Output Leakage
VIN = 0V to VCC
0.1
1.0
µA
VIL1 (1)
VIH1(1)
Input Low Voltage
Input High Voltage
4.5V ≤ VCC ≤ 5.5V
-0.6
2.0
0.8
VCC + 1
V
VIL2 (1)
VIH2(1)
Input Low Voltage
Input High Voltage
1.8V ≤ VCC ≤ 2.7V
-0.6
VCC x 0.7
VCC x 0.3
VCC + 1
V
VOL1
VOH1
Output Low Voltage
Output High Voltage
4.5V ≤ VCC ≤ 5.5V
0.4
V
VOL2
VOH2
Output Low Voltage
Output High Voltage
1.8V ≤ VCC ≤ 2.7V
Note:
IOL = 2.1 mA
IOH = -0.4 mA
2.4
IOL = 0.15 mA
IOH = -100 µA
V
0.2
VCC - 0.2
V
V
1. VIL min and VIH max are reference only and are not tested.
3
AC Characteristics
Applicable over recommended operating range from TA = -40°C to + 85°C, VCC = As Specified,
CL = 1 TTL Gate and 100 pF (unless otherwise noted).
Symbol
Parameter
Test Condition
Min
Typ
Max
fSK
SK Clock Frequency
4.5V ≤ VCC
2.7V ≤ VCC
2.5V ≤ VCC
1.8V ≤ VCC
≤ 5.5V
≤ 5.5V
≤ 5.5V
≤ 5.5V
0
0
0
0
tSKH
SK High Time
4.5V ≤ VCC
2.7V ≤ VCC
2.5V ≤ VCC
1.8V ≤ VCC
≤ 5.5V
≤ 5.5V
≤ 5.5V
≤ 5.5V
250
250
500
1000
ns
tSKL
SK Low Time
4.5V ≤ VCC
2.7V ≤ VCC
2.5V ≤ VCC
1.8V ≤ VCC
≤ 5.5V
≤ 5.5V
≤ 5.5V
≤ 5.5V
250
250
500
1000
ns
tCS
Minimum CS
Low Time
4.5V ≤ VCC
2.7V ≤ VCC
2.5V ≤ VCC
1.8V ≤ VCC
≤ 5.5V
≤ 5.5V
≤ 5.5V
≤ 5.5V
250
250
500
1000
ns
tCSS
CS Setup Time
Relative to SK
4.5V ≤ VCC
2.7V ≤ VCC
2.5V ≤ VCC
1.8V ≤ VCC
≤
≤
≤
≤
5.5V
5.5V
5.5V
5.5V
50
50
100
200
ns
4.5V ≤ VCC
2.7V ≤ VCC
2.5V ≤ VCC
1.8V ≤ VCC
≤
≤
≤
≤
5.5V
5.5V
5.5V
5.5V
100
100
200
400
ns
0
ns
100
100
200
400
ns
2
1
0.5
0.25
Units
MHz
tDIS
DI Setup Time
Relative to SK
tCSH
CS Hold Time
Relative to SK
tDIH
DI Hold Time
Relative to SK
4.5V ≤ VCC
2.7V ≤ VCC
2.5V ≤ VCC
1.8V ≤ VCC
≤
≤
≤
≤
5.5V
5.5V
5.5V
5.5V
≤
≤
≤
≤
5.5V
5.5V
5.5V
5.5V
250
250
500
1000
ns
tPD1
Output Delay to ‘1’
AC Test
4.5V ≤ VCC
2.7V ≤ VCC
2.5V ≤ VCC
1.8V ≤ VCC
tPD0
Output Delay to ‘0’
AC Test
4.5V ≤ VCC
2.7V ≤ VCC
2.5V ≤ VCC
1.8V ≤ VCC
≤
≤
≤
≤
5.5V
5.5V
5.5V
5.5V
250
250
500
1000
ns
≤
≤
≤
≤
5.5V
5.5V
5.5V
5.5V
250
250
500
1000
ns
≤
≤
≤
≤
5.5V
5.5V
5.5V
5.5V
100
100
200
400
ns
10
ms
tSV
CS to Status Valid
AC Test
4.5V ≤ VCC
2.7V ≤ VCC
2.5V ≤ VCC
1.8V ≤ VCC
tDF
CS to DO in High
Impedance
AC Test
CS = VIL
4.5V ≤ VCC
2.7V ≤ VCC
2.5V ≤ VCC
1.8V ≤ VCC
tWP
Write Cycle Time
0.1
Endurance
Note:
4
(1)
4.5V ≤ VCC ≤ 5.5V
5.0V, 25°C, Page Mode
1. This parameter is characterized and is not 100% tested.
AT93C46/56/57/66
1
1M
ms
Write Cycles
AT93C46/56/57/66
Instruction Set for the AT93C46
Address
Data
SB
Op
Code
x8
x 16
READ
1
10
A6 - A0
A5 - A0
EWEN
1
00
11XXXXX
11XXXX
Write enable must precede all
programming modes.
ERASE
1
11
A6 - A0
A5 - A0
Erase memory location An - A0.
WRITE
1
01
A6 - A0
A5 - A0
ERAL
1
00
10XXXXX
10XXXX
WRAL
1
00
01XXXXX
01XXXX
EWDS
1
00
00XXXXX
00XXXX
Instruction
x8
x 16
Comments
Reads data stored in memory, at
specified address.
D7 - D0
D15 - D0
Writes memory location An - A0.
Erases all memory locations. Valid
only at VCC = 4.5V to 5.5V.
D7 - D0
D15 - D0
Writes all memory locations. Valid
only at VCC = 4.5V to 5.5V.
Disables all programming instructions.
Instruction Set for the AT93C57
Address
Data
SB
Op
Code
x8
x 16
READ
1
10
A7 - A0
A6 - A0
EWEN
1
00
11XXXXXX
11XXXXX
Write enable must precede all
programming modes.
ERASE
1
11
A7 - A0
A6 - A0
Erase memory location An - A0.
WRITE
1
01
A7 - A0
A6 - A0
ERAL
1
00
10XXXXXX
10XXXXX
WRAL
1
00
01XXXXXX
01XXXXX
EWDS
1
00
00XXXXXX
00XXXXX
Instruction
x8
x 16
Comments
Reads data stored in memory, at
specified address.
D7 - D0
D15 - D0
Writes memory location An - A0.
Erases all memory locations. Valid
only at VCC = 4.5V to 5.5V.
D7 - D0
D15 - D0
Writes all memory locations. Valid
only at VCC = 4.5V to 5.5V.
Disables all programming instructions.
5
Instruction Set for the AT93C56 and AT93C66
Address
Data
SB
Op
Code
x8
x 16
READ
1
10
A8 - A0
A7 - A0
EWEN
1
00
11XXXXXXX
11XXXXXX
ERASE
1
11
A8 - A0
A7 - A0
WRITE
1
01
A8 - A0
A7 - A0
ERAL
1
00
10XXXXXXX
10XXXXXX
WRAL
1
00
01XXXXXXX
01XXXXXX
EWDS
1
00
00XXXXXXX
00XXXXXX
Instruction
x8
x 16
Comments
Reads data stored in memory, at
specified address.
Write enable must precede all
programming modes.
Erases memory location An - A0.
D7 - D0
D15 - D0
Writes memory location An - A0.
Erases all memory locations. Valid
only at VCC = 4.5V to 5.5V.
D7 - D0
D15 - D0
Writes all memory locations. Valid
when VCC = 5.0V ± 10% and Disable
Register cleared.
Disables all programming instructions.
Functional Description
The AT93C46/56/57/66 is accessed via a simple and versatile 3-wire serial communication interface. Device operation is controlled by seven instructions issued by the host
processor. A valid instruction starts with a rising edge
of CS and consists of a Start Bit (logic ‘1’) followed by the
appropriate Op Code and the desired memory Address
location.
READ (READ): The Read (READ) instruction contains
the Address code for the memory location to be read. After
the instruction and address are decoded, data from the
selected memory location is available at the serial output
pin DO. Output data changes are synchronized with the rising edges of serial clock SK. It should be noted that a
dummy bit (logic ‘0’) precedes the 8- or 16-bit data output
string.
ERASE/WRITE (EWEN): To assure data integrity, the
part automatically goes into the Erase/Write Disable
(EWDS) state when power is first applied. An Erase/Write
Enable (EWEN) instruction must be executed first before
any programming instructions can be carried out. Please
note that once in the Erase/Write Enable state, programming remains enabled until an Erase/Write Disable
(EWDS) instruction is executed or VCC power is removed
from the part.
ERASE (ERASE): The Erase (ERASE) instruction programs all bits in the specified memory location to the logical
‘1’ state. The self-timed erase cycle starts once the ERASE
instruction and address are decoded. The DO pin outputs
the READY/BUSY status of the part if CS is brought high
after being kept low for a minimum of 250 ns (tCS). A logic
‘1’ at pin DO indicates that the selected memory location
has been erased, and the part is ready for another instruction.
6
AT93C46/56/57/66
WRITE (WRITE): The Write (WRITE) instruction contains
the 8 or 16 bits of data to be written into the specified memory location. The self-timed programming cycle, tWP, starts
after the last bit of data is received at serial data input pin
DI. The DO pin outputs the READY/BUSY status of the part
if CS is brought high after being kept low for a minimum of
250 ns (tCS). A logic ‘0’ at DO indicates that programming is
still in progress. A logic ‘1’ indicates that the memory location at the specified address has been written with the data
pattern contained in the instruction and the part is ready for
further instructions. A READY/BUSY status cannot be
obtained if the CS is brought high after the end of the
self-timed programming cycle, tWP.
ERASE ALL (ERAL): The Erase All (ERAL) instruction
programs every bit in the memory array to the logic ‘1’ state
and is primarily used for testing purposes. The DO pin outputs the READY/BUSY status of the part if CS is brought
high after being kept low for a minimum of 250 ns (tCS). The
ERAL instruction is valid only at VCC = 5.0V ± 10%.
WRITE ALL (WRAL): The Write All (WRAL) instruction
programs all memory locations with the data patterns specified in the instruction. The DO pin outputs the
READY/BUSY status of the part if CS is brought high after
being kept low for a minimum of 250 ns (tCS). The WRAL
instruction is valid only at VCC = 5.0V ± 10%.
ERASE/WRITE DISABLE (EWDS): To protect against
accidental data disturb, the Erase/Write Disable (EWDS)
instruction disables all programming modes and should be
executed after all programming operations. The operation
of the READ instruction is independent of both the EWEN
and EWDS instructions and can be executed at any time.
AT93C46/56/57/66
Timing Diagrams
Synchronous Data Timing
Note:
1.
This is the minimum SK period.
Organization Key for Timing Diagrams
I/O
Note:
AT93C46 (1K)
AT93C56 (2K)
AT93C57 (2K)
AT93C66 (4K)
x8
x 16
x8
x 16
x8
x 16
x8
x 16
AN
A6
A5
A8(1)
A7
A7
A6
A8
A7
DN
D7
D15
D7
D15
D7
D15
D7
D15
1. A8 is a DON’T CARE value, but the extra clock is required.
READ Timing
7
EWEN Timing
tCS
CS
SK
DI
1
0
0
1
...
1
EWDS Timing
tCS
CS
SK
DI
1
0
0
0
...
0
WRITE Timing
tCS
CS
SK
DI
DO
1
0
1
AN
...
A0
DN
...
D0
HIGH IMPEDANCE
BUSY
READY
tWP
WRAL Timing(1)
tCS
CS
SK
DI
DO
1
0
0
0
1
...
DN
...
D0
BUSY
HIGH IMPEDANCE
READY
tWP
Note:
8
1.
Valid only at VCC = 4.5V to 5.5V.
AT93C46/56/57/66
AT93C46/56/57/66
ERASE Timing
tCS
CS
STANDBY
CHECK
STATUS
SK
DI
1
1
1
AN
AN-1 AN-2
...
A0
tDF
tSV
DO
HIGH IMPEDANCE
HIGH IMPEDANCE
BUSY
READY
tWP
TERAL Timing(1)
tCS
CS
CHECK
STATUS
STANDBY
tSV
tDF
SK
DI
DO
1
0
0
1
0
BUSY
HIGH IMPEDANCE
HIGH IMPEDANCE
READY
tWP
Note:
1.
Valid only at VCC = 4.5V to 5.5V.
9
AT93C46 Ordering Information
tWP (max)
(ms)
ICC (max)
(µA)
ISB (max)
(µA)
fMAX
(kHz)
10
2000
30.0
10
800
Ordering Code
Package
2000
AT93C46-10PC
AT93C46-10SC
AT93C46R-10SC
AT93C46W-10SC
AT93C46-10TC
8P3
8S1
8S1
8S2
8T
Commercial
(0°C to 70°C)
30.0
2000
AT93C46-10PI
AT93C46-10SI
AT93C46R-10SI
AT93C46W-10SI
AT93C46-10TI
8P3
8S1
8S1
8S2
8T
Industrial
(-40°C to 85°C)
10.0
1000
AT93C46-10PC-2.7
AT93C46-10SC-2.7
AT93C46R-10SC-2.7
AT93C46W-10SC-2.7
AT93C46-10TC-2.7
8P3
8S1
8S1
8S2
8T
Commercial
(0°C to 70°C)
10.0
1000
AT93C46-10PI-2.7
AT93C46-10SI-2.7
AT93C46R-10SI-2.7
AT93C46W-10SI-2.7
AT93C46-10TI-2.7
8P3
8S1
8S1
8S2
8T
Industrial
(-40°C to 85°C)
Package Type
8P3
8-Lead, 0.300" Wide, Plastic Dual Inline Package (PDIP)
8S1
8-Lead, 0.150" Wide, Plastic Gull Wing Small Outline (JEDEC SOIC)
8S2
8-Lead, 0.200” Wide, Plastic Gull Wing Small Outline (EIAJ SOIC)
8T
8-Lead, 0.170” Wide, Thin Shrink Small Outline Package (TSSOP)
Options
Blank
Standard Operation (4.5V to 5.5V)
-2.7
Low Voltage (2.7V to 5.5V)
-2.5
Low Voltage (2.5V to 5.5V)
R
Rotated Pinout
10
AT93C46/56/57/66
Operation Range
AT93C46/56/57/66
AT93C46 Ordering Information (Continued)
tWP (max)
(ms)
ICC (max)
(µA)
ISB (max)
(µA)
fMAX
(kHz)
10
600
10.0
10
80
Ordering Code
Package
Operation Range
500
AT93C46-10PC-2.5
AT93C46-10SC-2.5
AT93C46R-10SC-2.5
AT93C46W-10SC-2.5
AT93C46-10TC-2.5
8P3
8S1
8S1
8S2
8T
Commercial
(0°C to 70°C)
10.0
500
AT93C46-10PI-2.5
AT93C46-10SI-2.5
AT93C46R-10SI-2.5
AT93C46W-10SI-2.5
AT93C46-10TI-2.5
8P3
8S1
8S1
8S2
8T
Industrial
(-40°C to 85°C)
0.1
250
AT93C46-10PC-1.8
AT93C46-10SC-1.8
AT93C46R-10SC-1.8
AT93C46W-10SC-1.8
AT93C46-10TC-1.8
8P3
8S1
8S1
8S2
8T
Commercial
(0°C to 70°C)
0.1
250
AT93C46-10PI-1.8
AT93C46-10SI-1.8
AT93C46R-10SI-1.8
AT93C46W-10SI-1.8
AT93C46-10TI-1.8
8P3
8S1
8S1
8S2
8T
Industrial
(-40°C to 85°C)
Package Type
8P3
8-Lead, 0.300" Wide, Plastic Dual Inline Package (PDIP)
8S1
8-Lead, 0.150" Wide, Plastic Gull Wing Small Outline (JEDEC SOIC)
8S2
8-Lead, 0.200” Wide, Plastic Gull Wing Small Outline (EIAJ SOIC)
8T
8-Lead, 0.170” Wide, Thin Shrink Small Outline Package (TSSOP)
Options
Blank
Standard Operation (4.5V to 5.5V)
-2.7
Low Voltage (2.7V to 5.5V)
-2.5
Low Voltage (2.5V to 5.5V)
R
Rotated Pinout
11
AT93C56 Ordering Information
tWP (max)
(ms)
ICC (max)
(µA)
ISB (max)
(µA)
fMAX
(kHz)
10
2000
30.0
10
10
800
600
Ordering Code
Package
2000
AT93C56-10PC
AT93C56-10SC
AT93C56W-10SC
8P3
8S1
8S2
Commercial
(0°C to 70°C)
30.0
2000
AT93C56-10PI
AT93C56-10SI
AT93C56W-10SI
8P3
8S1
8S2
Industrial
(-40°C to 85°C)
10.0
1000
AT93C56-10PC-2.7
AT93C56-10SC-2.7
AT93C56W-10SC-2.7
8P3
8S1
8S2
Commercial
(0°C to 70°C)
10.0
1000
AT93C56-10PI-2.7
AT93C56-10SI-2.7
AT93C56W-10SI-2.7
8P3
8S1
8S2
Industrial
(-40°C to 85°C)
10.0
500
AT93C56-10PC-2.5
AT93C56-10SC-2.5
AT93C56W-10SC-2.5
8P3
8S1
8S2
Commercial
(0°C to 70°C)
10.0
500
AT93C56-10PI-2.5
AT93C56-10SI-2.5
AT93C56W-10SI-2.5
8P3
8S1
8S2
Industrial
(-40°C to 85°C)
Package Type
8P3
8-Lead, 0.300" Wide, Plastic Dual Inline Package (PDIP)
8S1
8-Lead, 0.150" Wide, Plastic Gull Wing Small Outline (JEDEC SOIC)
8S2
8-Lead, 0.200” Wide, Plastic Gull Wing Small Outline (EIAJ SOIC)
Options
Blank
Standard Operation (4.5V to 5.5V)
-2.7
Low Voltage (2.7V to 5.5V)
-2.5
Low Voltage (2.5V to 5.5V)
R
Rotated Pinout
12
AT93C46/56/57/66
Operation Range
AT93C46/56/57/66
AT93C57 Ordering Information
tWP (max)
(ms)
ICC (max)
(µA)
ISB (max)
(µA)
fMAX
(kHz)
10
2000
30.0
10
800
Ordering Code
Package
Operation Range
2000
AT93C57-10PC
AT93C57-10SC
AT93C57W-10SC
8P3
8S1
8S2
Commercial
(0°C to 70°C)
30.0
2000
AT93C57-10PI
AT93C57-10SI
AT93C57W-10SI
8P3
8S1
8S2
Industrial
(-40°C to 85°C)
10.0
1000
AT93C57-10PC-2.7
AT93C57-10SC-2.7
AT93C57W-10SC-2.7
8P3
8S1
8S2
Commercial
(0°C to 70°C)
10.0
1000
AT93C57-10PI-2.7
AT93C57-10SI-2.7
AT93C57W-10SI-2.7
8P3
8S1
8S2
Industrial
(-40°C to 85°C)
Package Type
8P3
8-Lead, 0.300" Wide, Plastic Dual Inline Package (PDIP)
8S1
8-Lead, 0.150" Wide, Plastic Gull Wing Small Outline (JEDEC SOIC)
8S2
8-Lead, 0.200” Wide, Plastic Gull Wing Small Outline (EIAJ SOIC)
Options
Blank
Standard Operation (4.5V to 5.5V)
-2.7
Low Voltage (2.7V to 5.5V)
-2.5
Low Voltage (2.5V to 5.5V)
R
Rotated Pinout
13
AT93C66 Ordering Information
tWP (max)
(ms)
ICC (max)
(µA)
ISB (max)
(µA)
fMAX
(kHz)
10
2000
30.0
10
10
800
600
Ordering Code
Package
2000
AT93C66-10PC
AT93C66-10SC
AT93C66W-10SC
8P3
8S1
8S2
Commercial
(0°C to 70°C)
30.0
2000
AT93C66-10PI
AT93C66-10SI
AT93C66W-10SI
8P3
8S1
8S2
Industrial
(-40°C to 85°C)
10.0
1000
AT93C66-10PC-2.7
AT93C66-10SC-2.7
AT93C66W-10SC-2.7
8P3
8S1
8S2
Commercial
(0°C to 70°C)
10.0
1000
AT93C66-10PI-2.7
AT93C66-10SI-2.7
AT93C66W-10SI-2.7
8P3
8S1
8S2
Industrial
(-40°C to 85°C)
10.0
500
AT93C66-10PC-2.5
AT93C66-10SC-2.5
AT93C66W-10SC-2.5
8P3
8S1
8S2
Commercial
(0°C to 70°C)
10.0
500
AT93C66-10PI-2.5
AT93C66-10SI-2.5
AT93C66W-10SI-2.5
8P3
8S1
8S2
Industrial
(-40°C to 85°C)
Package Type
8P3
8-Lead, 0.300" Wide, Plastic Dual Inline Package (PDIP)
8S1
8-Lead, 0.150" Wide, Plastic Gull Wing Small Outline (JEDEC SOIC)
8S2
8-Lead, 0.200” Wide, Plastic Gull Wing Small Outline (EIAJ SOIC)
Options
Blank
Standard Operation (4.5V to 5.5V)
-2.7
Low Voltage (2.7V to 5.5V)
-2.5
Low Voltage (2.5V to 5.5V)
R
Rotated Pinout
14
AT93C46/56/57/66
Operation Range
AT93C46/56/57/66
Packaging Information
8P3, 8-Lead, 0.300” Wide, Plastic Dual Inline
Package (PDIP)
Dimensions in Inches and (Millimeters)
8S1, 8-Lead, 0.150” Wide, Plastic Gull Wing Small
Outline (JEDEC SOIC)
Dimensions in Inches and (Millimeters)
JEDEC STANDARD MS-001 BA
.020 (.508)
.013 (.330)
.400 (10.16)
.355 (9.02)
PIN
1
.280 (7.11)
.240 (6.10)
.244 (6.20)
.228 (5.79)
.157 (3.99)
.150 (3.81)
PIN 1
.037 (.940)
.027 (.690)
.300 (7.62) REF
.050 (1.27) BSC
.210 (5.33) MAX
.100 (2.54) BSC
SEATING
PLANE
.196 (4.98)
.189 (4.80)
.068 (1.73)
.053 (1.35)
.015 (.380) MIN
.150 (3.81)
.115 (2.92)
.070 (1.78)
.045 (1.14)
.022 (.559)
.014 (.356)
.010 (.254)
.004 (.102)
.325 (8.26)
.300 (7.62)
0
REF
8
0
REF
15
.012 (.305)
.008 (.203)
.430 (10.9) MAX
8S2, 8-Lead, 0.200” Wide, Plastic Gull Wing Small
Outline (EIAJ SOIC)
Dimensions in Inches and (Millimeters)
.010 (.254)
.007 (.203)
.050 (1.27)
.016 (.406)
8T, 8-Lead, 0.170” Wide Thin Shrink Small Outline
Package (TSSOP)
Dimensions in Millimeters and (Inches)*
.020 (.508)
.012 (.305)
PIN 1
.213 (5.41)
.205 (5.21)
PIN 1
6.50 (.256)
6.25 (.246)
.330 (8.38)
.300 (7.62)
0.30 (.012)
0.19 (.008)
.050 (1.27) BSC
.212 (5.38)
.203 (5.16)
.080 (2.03)
.070 (1.78)
3.10 (.122)
2.90 (.114)
1.05 (.041)
0.80 (.033)
.65 (.026) BSC
.013 (.330)
.004 (.102)
0
REF
8
.035 (.889)
.020 (.508)
1.20 (.047) MAX
0.15 (.006)
0.05 (.002)
4.5 (.177)
4.3 (.169)
.010 (.254)
.007 (.178)
0.20 (.008)
0.09 (.004)
0 REF
8
0.75 (.030)
0.45 (.018)
*Controlling dimension: millimeters
15
Similar pages