IRF AUIRS2191S

AUIRS2191S
Product Summary
Features
•
•
•
•
•
•
•
•
•
•
•
•
Floating channel designed for bootstrap operation.
Fully operational up to +600V
Tolerant to negative transient voltage, dV/dt immune
Gate drive supply range from 10V to 20V
Independent low and high side channels.
Input logic HIN/LIN active high
Undervoltage lockout for both channels
3.3V, 5V, and 15V input logic compatible
CMOS Schmitt-triggered inputs with pull-down
Matched propagation delay for two channels
Lead-Free and RoHS Compliant
Automotive qualified*
≤ 600V
VOFFSET
VOUT
10 – 20V
Io+ & I o- (typical)
3.5A & 3.5A
tON & tOFF (tpial)
90ns & 90ns
Delay Matching (max)
25ns
Package Options
Typical Applications
•
•
High power DC-DC SMPS converters
Other high frequency applications
16-Lead SOIC Narrow Body
O
O
Typical Connection Diagram
2181
n
(s) show
o our
oper
Up to 600V
Vcc
HIN
LIN
Vcc
HIN
LIN
Vss
Vss
HO
VB
VS
AUIRS21814
TO
LOAD
COM
LO
(Refer to Lead Assignments for correct pin configuration). This/These
diagram(s) show electrical connections only. Please refer to our
Application Notes and Design Tips for proper circuit board layout.
1
www.irf.com
© 2012 International Rectifier
February 3, 2013
AUIRS2191S
Table of Contents
Page
Description
3
Qualification Information
4
Absolute Maximum Ratings
5
Recommended Operating Conditions
5
Static Electrical Characteristics
6
Dynamic Electrical Characteristics
6
Functional Block Diagram
7
Input/Output Pin Equivalent Circuit Diagram
8
Lead Definitions
9
Lead Assignments
9
Timing diagram
10
Parameter Temperature Trends
11, 13
Package Details
14, 15
Part Marking Information
16
Ordering Information
16
Important Notice
17
2
www.irf.com
© 2012 International Rectifier
February 3, 2013
AUIRS2191S
Description
The AUIRS2191S is a high power, high voltage, high speed power MOSFET and IGBT driver with independent high and low side
referenced output channels, ideal for DC-DC converter applications. Logic inputs are compatible with standard CMOS or LSTTL
output, down to 3.3V logic. The output drivers feature a high pulse current buffer stage designed for minimum driver crossconduction. Propagation delays are matched to simplify use in high frequency applications. The floating channel can be used to
drive an N-channel power MOSFET or IGBT in the high side configuration which operates up to 600V. Proprietary HVIC and latch
immune CMOS technologies enable ruggedized monolithic construction.
3
www.irf.com
© 2012 International Rectifier
February 3, 2013
AUIRS2191S
Qualification Information†
Automotive
††
(per AEC-Q100 )
Comments: This family of ICs has passed an Automotive
qualification. IR’s Industrial and Consumer qualification
level is granted by extension of the higher Automotive level.
Qualification Level
††
MSL3 260°C
(per IPC/JEDEC J-STD-020)
Moisture Sensitivity Level
Machine Model
Human Body Model
ESD
Charged Device Model
IC Latch-Up Test
RoHS Compliant
†
††
Class M1 (100V)
(per AEC-Q100-003)
Class H1B (1000V)
(per AEC-Q100-002)
Class C4 (1000V)
(per AEC-Q100-011)
Class II Level A
(per AEC-Q100-004)
Yes
Qualification standards can be found at International Rectifier’s web site http://www.irf.com/
Higher MSL ratings may be available for the specific package types listed here. Please contact your
International Rectifier sales representative for further information.
4
www.irf.com
© 2012 International Rectifier
February 3, 2013
AUIRS2191S
Absolute Maximum Ratings
Absolute maximum ratings indicate sustained limits beyond which permanent damage to the device may occur. These are stress
ratings only, functional operation of the device at these or any other condition beyond those indicated in the “Recommended
Operating Condition” is not implied. Exposure to absolute maximum-rated conditions for extended periods may affect device
reliability. All voltage parameters are absolute voltages referenced to COM unless otherwise stated in the table. The thermal
resistance and power dissipation ratings are measured under board mounted and still air conditions.
Symbol
VB
VS
VHO
VCC
VLO
VIN
VSS
dVS/dt
PD
RΘJA
Definition
High side floating supply voltage
High side floating supply offset voltage
High side floating output voltage
Low side fixed supply voltage
Low-side output voltage
Logic input voltage (HIN & LIN)
Logic ground
Allowable VS offset supply transient
Package power dissipation @ TA ≤+25 ºC
Thermal resistance, junction to ambient
Min
-0.3
VB – 20
VS – 0.3
-0.3
-0.3
VSS – 0.3
VCC – 20
-------
Max
620
VB + 0.3
VB + 0.3
20
VCC + 0.3
VCC + 0.3
VCC + 0.3
50
1.0
100
TJ
Junction temperature
---
150
TS
TL
Storage temperature
Lead temperature (soldering, 10 seconds)
-55
---
150
300
Units
V
V/ns
W
ºC/W
ºC
Recommended Operating Conditions
The input/output logic timing diagram is shown in Figure 1. For proper operation the device should be used within the
recommended conditions. The VS, VSS, and COM offset ratings are tested with all supplies biased at 15V differential.
Symbol
†
Definition
Min
Max
VS + 10
VS + 20
Units
VB
High side floating supply absolute voltage
VS
High side floating supply offset voltage
†
600
VHO
High side floating output voltage
VS
VB
V
VCC
VLO
VIN
VSS
TA
Low side fixed supply voltage
Low side output voltage
Logic input voltage (HIN & LIN)
Logic ground
Ambient temperature
10
0
VSS
-5
-40
20
VCC
VCC
5
125
ºC
Logic operation for VS of –5 V to 600 V. Logic state held for VS of –5 V to –VBS.
(Please refer to Design Tip DT97-3 for more details)
5
www.irf.com
© 2012 International Rectifier
February 3, 2013
AUIRS2191S
Static Electrical Characteristics
Unless otherwise noted, these specifications apply for an operating junction temperature range of -40°C ≤ Tj ≤ 125°C with bias
conditions of VBIAS (VCC or VBS) = 15V. The VIN, VTH parameters are referenced to VSS and are applicable to all logic input leads:
HIN and LIN. The VO parameters are referenced to COM and are applicable to the respective output leads: HO or LO.
Symbol
Definition
Min
Typ
Max
VIH
Logic “1” input voltage
2.5
---
---
VIL
Logic “0” input voltage
High level output voltage, VBIAS-VO
High level output voltage, VBIAS-VO
Low level output voltage, VO
Offset supply leakage current
Quiescent VBS supply current
Quiescent VCC supply current
---------------
----------100
150
0.8
2.5
3.3
0.1
50
200
300
IQBS18
Quiescent VBS supply current
---
180
300
IQCC18
Quiescent VCC supply current
---
300
450
IQBS20
Quiescent VBS supply current
---
850
1500
IQCC20
Quiescent VCC supply current
---
1500
2500
Logic “1” input bias current
Logic “0” input bias current
VBS supply undervoltage positive going threshold
VBS supply undervoltage negative going threshold
VBS supply undervoltage hysteresis
VCC supply undervoltage positive going threshold
VCC supply undervoltage negative going threshold
VCC supply undervoltage hysteresis
----8.0
7.4
0.3
8.0
7.4
0.3
3.5
--8.9
8.2
0.7
8.9
8.2
0.7
7
1.0
9.8
8.8
--9.8
9.0
---
2.6
3.5
---
VOH 2mA
VOH 20mA
VOL
ILK
IQBS
IQCC
IIN+
IINVBSUV+
VBSUVVBSUVHYS
VCCUV+
VCCUVVCCUVHYS
IO+
Output high short circuit pulsed current
(†)
Unit
s
VCC = 9.8V – 20V
V
µA
IO-
Output low short circuit pulsed current
IO+
Output high short circuit pulsed current
IO-
Output low short circuit pulsed current
(†)
(†)
(†)
2.6
3.5
---
1.8
3.5
---
1.8
3.5
---
Io= 2 mA
Io= 20 mA
Io= 2 mA
VB = VS = 600 V
VIN = 0V or 3.3V
VIN = 0V or 3.3V
VIN = 0V or 3.3V
VBS=18V
VIN = 0V or 3.3V
VCC=18V
VIN = 0V or 3.3V
VBS=20V
VIN = 0V or 3.3V
VCC=20V
VIN = 3.3V
VIN = 0V
V
A
(†)
Test Conditions
A
VO = 0 V,
PW ≤ 10 μs,
Tj = 25°C
VO = 15 V,
PW ≤ 10 μs
Tj = 25°C
VO = 0 V,
PW ≤ 10 μs,
VO = 15 V,
PW ≤ 10 μs
Guaranteed by design
Dynamic Electrical Characteristics
Unless otherwise noted, these specifications apply for an operating junction temperature range of -40°C ≤ Tj ≤125°C with bias
conditions of VBIAS (VCC, VBS) = 15V, CL = 1000 pF. The dynamic electrical characteristics are measured using the test definitions
shown in Figure 3.
Symbol
tON
tOFF
tR
tF
MT
Definition
Turn-on propagation delay
Turn-off propagation delay
Turn-on rise time
Turn-off fall time
Delay matching, HS & LS turn-on/off
6
www.irf.com
© 2012 International Rectifier
Min
50
50
5
5
---
Typ
90
90
15
15
---
Max
175
175
60
60
25
Units
Test Conditions
VS = 0V
VS = 0V or 600V
ns
February 3, 2013
AUIRS2191S
Functional Block Diagram
VB
UV
DETECT
R
HV
LEVEL
SHIFTER
VSS/COM
LEVEL
SHIFT
HIN
Q
R
PULSE
FILTER
S
PULSE
GENERATOR
HO
Q
VS
VCC
UV
DETECT
VSS/COM
LEVEL
SHIFT
LIN
LO
DELAY
COM
VSS
7
www.irf.com
© 2012 International Rectifier
February 3, 2013
AUIRS2191S
Input/Output Pin Equivalent Circuit Diagrams: AUIRS2191
VB
ESD
Diode
20V
HO
ESD
Diode
VCC
ESD
Diode
VS
600V
VCC
HIN
LIN
RPD
ESD
Diode
LO
RESD
20V
20V
ESD
Diode
VSS
ESD
Diode
COM
VSS
8
www.irf.com
© 2012 International Rectifier
February 3, 2013
AUIRS2191S
Lead Definitions: AUIRS2191
Pin#
Symbol
Description
1
VB
High-side floating supply
6
HIN
Logic inputs for high-side gate driver output (HO), in phase (referenced to VSS)
7
LIN
Logic inputs for low-side gate driver output (LO), in phase (referenced to VSS)
8
VSS
Low-side logic return
9
COM
Low-side return
11
LO
12
VCC
15
VS
High voltage floating supply return
16
HO
High-side gate drive output
Low-side gate drive output
Low-side supply voltage
Lead Assignments
1
VB
HO
16
2
NC
VS
15
3
NC
NC
14
4
NC
NC
13
5
NC
VCC
12
6
HIN
LO
11
7
LIN
NC
10
8
VSS
COM
9
16 Lead SOIC
9
www.irf.com
© 2012 International Rectifier
February 3, 2013
AUIRS2191S
Application Information and Additional Details
50%
HIN
LIN
HIN
LIN
50%
toff
tr
ton
90%
HO
LO
LO
HO
10%
tf
90%
10%
Figure 1. Input/Output Timing Diagram
Figure 2. Switching Time Waveform Definitions
50%
50%
HIN
LIN
LO
HO
10%
MT
MT
90%
LO
HO
Figure 3. Delay Matching Waveform Definitions
10
www.irf.com
© 2012 International Rectifier
February 3, 2013
AUIRS2191S
Tolerability to Negative VS Transients
The AUIRS2191S has been seen to withstand negative VS transient conditions on the order of -30V for a period of 400 ns.
An illustration of the AUIRS2191S performance can be seen in Figure 7, where points above the line represent pulses that
the circuit can withstand (with VCC=VBS= 15V and TA = 25°C).
Effect of ambient temperature on tolerability to negative Vs Transient is quite contained, in fact tests performed at -40^C
and at 125^C showed how, for a given pulse duration, the AUIRS2191S can withstand negVs pulse of absolute amplitude
5V lower than what represented by the line in Figure 7.
So, in whole temperature range the curve of Figure 7 has to be risen up of 5V.
Even though the AUIRS2191S has been shown able to handle these negative VS transient conditions, it is highly
recommended that the circuit designer always limit the negative VS transients as much as possible by careful PCB layout
and component use.
Figure 7: -Vs Transient results
11
www.irf.com
© 2012 International Rectifier
February 3, 2013
AUIRS2191S
Parameter Temperature Trends
150
Turn-off Propagation Delay (ns)
Turn-on Propagation Delay (ns)
Figures illustrated in this chapter provide information on the experimental performance of the AUIRS2191S HVIC. The line plotted
in each figure is generated from actual lab data. A large number of individual samples were tested at three temperatures (-40 ºC,
25 ºC, and 125 ºC) in order to generate the experimental curve. The line consists of three data points (one data point at each of
the tested temperatures) that have been connected together to illustrate the understood trend. The individual data points on the
Typ. curve were determined by calculating the averaged experimental value of the parameter (for a given temperature).
130
110
Max.
90
Typ
Min.
70
-50
-25
0
25
50
75
100
145
125
105
85
Max.
Typ.
Min.
65
125
-50
-25
0
o
Figure 4. Turn-On Time vs. Temperature
Turn-Off fall Time (ns) -
Torn-On Rise Time (ns)
100
125
20
18
Max.
Typ.
14
Min.
-50
Max.
18
16
Typ.
14
Min.
12
-25
0
25
50
75
100
Temperature (oC)
Figure 6. Turn-On Rise Time vs. Temperature
12
75
Figure 5. Turn-Off Time vs. Temperature
20
12
50
Temperature (oC)
Temperature ( C)
16
25
www.irf.com
© 2012 International Rectifier
125
-50
-25
0
25
50
75
100
o
Temperature ( C)
Figure 7. Turn-Off Fall Time vs. Temperature
February 3, 2013
125
Delay Matching (ns)
24
20
16
Max.
12
Typ.
Min.
8
-50
-25
0
25
50
75
100
125
Offset Supply Leakage Current (uA)
AUIRS2191S
20
15
10
Max.
5
Min.
Typ.
0
-50
-25
0
o
100
125
Figure 8. Delay Matching Time vs. Temperature
Figure 9. Offset Supply Current vs. Temperature
200
150
Quiescent VS Supply Current (uA)
Quiescent V CC Supply Current (uA)
75
Temperature ( C)
175
150
125
Max.
Typ.
Min.
100
-50
-25
0
25
75
50
100
130
110
Max.
90
Typ.
Min.
70
-50
125
-25
0
Quiescent VS Supply Current (uA)
450
400
350
300
Max.
250
Typ.
Min.
200
0
25
50
75
100
125
Temperature (oC)
Figure 12. VCC = 18V Supply Current vs. Temperature
www.irf.com
75
100
125
Figure 11. VBS Supply Current vs. Temperature
Figure 10. VCC Supply Current vs. Temperature
-25
50
Temperature ( C)
Temperature ( C)
-50
25
o
o
Quiescent VCC Supply Current (uA)
50
o
Temperature ( C)
13
25
© 2012 International Rectifier
300
250
200
Max.
Typ.
150
Min.
100
-50
-25
0
25
50
75
100
125
o
Temperature ( C)
Figure 13. VBS = 18V Supply Current vs. Temperature
February 3, 2013
2000
Quiescent VS Supply Current (uA)
Quiescent VCC Supply Current (uA)
AUIRS2191S
Max.
1750
Typ.
1500
Min.
1250
1000
-50
-25
0
25
50
75
100
125
1500
1250
Max.
1000
Typ.
750
Min.
500
-50
-25
0
Temperature (oC)
100
125
Figure 15. VBS = 20V Supply Current vs. Temperature
0.00
5
4
Max.
Typ.
Min.
2
-50
-25
0
25
50
75
100
125
o
Temperature ( C)
Figure 16. Logic “1” Input Bias Current vs. Temperature
www.irf.com
© 2012 International Rectifier
Logic "0" Input Bias Current (uA).
Logic "1" Input Bias Current (uA)
75
Temperature ( C)
6
14
50
o
Figure 14. VCC = 20V Supply Current vs. Temperature
3
25
Max.
-0.01
Typ.
Min.
-0.02
-0.03
-0.04
-50
-25
0
25
50
75
100
125
o
Temperature ( C)
Figure 17. Logic “0” Input Bias Current vs. Temperature
February 3, 2013
AUIRS2191S
Package Details: SOIC16N
15
www.irf.com
© 2012 International Rectifier
February 3, 2013
AUIRS2191S
Package Details: SOIC16N, Tape and Reel
LOADED TAPE FEED DIRECTION
A
B
H
D
F
C
NOTE : CONTROLLING
DIM ENSION IN M M
E
G
CARRIER TAPE DIMENSION FOR
Metric
Code
Min
Max
A
7.90
8.10
B
3.90
4.10
C
15.70
16.30
D
7.40
7.60
E
6.40
6.60
F
10.20
10.40
G
1.50
n/a
H
1.50
1.60
16SOICN
Imperial
Min
Max
0.311
0.318
0.153
0.161
0.618
0.641
0.291
0.299
0.252
0.260
0.402
0.409
0.059
n/a
0.059
0.062
F
D
C
B
A
E
G
H
REEL DIMENSIONS FOR 16SOICN
Metric
Imperial
Code
Min
Max
Min
Max
13.001
A
329.60
330.25
12.976
21.45
0.824
0.844
B
20.95
C
12.80
13.20
0.503
0.519
D
1.95
2.45
0.767
0.096
E
98.00
102.00
3.858
4.015
F
n/a
22.40
n/a
0.881
0.830
G
18.50
21.10
0.728
0.645
0.724
H
16.40
18.40
16
www.irf.com
© 2012 International Rectifier
February 3, 2013
AUIRS2191S
Part Marking Information
Part number
AUIRS2191S
Date code
AYWW ?
IR logo
Pin 1
Identifier
? XXXX
?
MARKING CODE
P
Lead Free Released
Lot Code
(Prod mode –
4 digit SPN code)
Assembly site code
Per SCOP 200-002
Non-Lead Free Released
Ordering Information
Standard Pack
Base Part Number
AUIRS2191S
17
www.irf.com
Package Type
SOIC16N
© 2012 International Rectifier
Complete Part Number
Form
Quantity
Tube/Bulk
45
AUIRS2191S
Tape and Reel
2500
AUIRS2191STR
February 3, 2013
AUIRS2191S
IMPORTANT NOTICE
Unless specifically designated for the automotive market, International Rectifier Corporation and its subsidiaries (IR)
reserve the right to make corrections, modifications, enhancements, improvements, and other changes to its products and
services at any time and to discontinue any product or services without notice. Part numbers designated with the “AU”
prefix follow automotive industry and / or customer specific requirements with regards to product discontinuance and
process change notification. All products are sold subject to IR’s terms and conditions of sale supplied at the time of order
acknowledgment.
IR warrants performance of its hardware products to the specifications applicable at the time of sale in accordance with
IR’s standard warranty. Testing and other quality control techniques are used to the extent IR deems necessary to support
this warranty. Except where mandated by government requirements, testing of all parameters of each product is not
necessarily performed.
IR assumes no liability for applications assistance or customer product design. Customers are responsible for their
products and applications using IR components. To minimize the risks with customer products and applications,
customers should provide adequate design and operating safeguards.
Reproduction of IR information in IR data books or data sheets is permissible only if reproduction is without alteration and
is accompanied by all associated warranties, conditions, limitations, and notices. Reproduction of this information with
alterations is an unfair and deceptive business practice. IR is not responsible or liable for such altered documentation.
Information of third parties may be subject to additional restrictions.
Resale of IR products or serviced with statements different from or beyond the parameters stated by IR for that product or
service voids all express and any implied warranties for the associated IR product or service and is an unfair and
deceptive business practice. IR is not responsible or liable for any such statements.
IR products are not designed, intended, or authorized for use as components in systems intended for surgical implant into
the body, or in other applications intended to support or sustain life, or in any other application in which the failure of the IR
product could create a situation where personal injury or death may occur. Should Buyer purchase or use IR products for
any such unintended or unauthorized application, Buyer shall indemnify and hold International Rectifier and its officers,
employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and
reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such
unintended or unauthorized use, even if such claim alleges that IR was negligent regarding the design or manufacture of
the product.
Only products certified as military grade by the Defense Logistics Agency (DLA) of the US Department of Defense, are
designed and manufactured to meet DLA military specifications required by certain military, aerospace or other
applications. Buyers acknowledge and agree that any use of IR products not certified by DLA as military-grade, in
applications requiring military grade products, is solely at the Buyer’s own risk and that they are solely responsible for
compliance with all legal and regulatory requirements in connection with such use.
IR products are neither designed nor intended for use in automotive applications or environments unless the specific IR
products are designated by IR as compliant with ISO/TS 16949 requirements and bear a part number including the
designation “AU”. Buyers acknowledge and agree that, if they use any non-designated products in automotive
applications, IR will not be responsible for any failure to meet such requirements.
For technical support, please contact IR’s Technical Assistance Center
http://www.irf.com/technical-info/
WORLD HEADQUARTERS:
101 N. Sepulveda Blvd., El Segundo, California 90245
Tel: (310) 252-7105
18
www.irf.com
© 2012 International Rectifier
February 3, 2013
AUIRS2191S
Revision History
Date
Feb. 5, 2009
Jan. 22, 2010
Jan. 27, 2010
Feb. 01, 2010
Mar. 15, 2010
May 26th, 2010
Jun 08th 2011
Oct. 26, 2011
Oct. 27, 2011
Jun. 11, 2012
Oct 24th, 2012
Jan. 18, 2013
19
Comment
Original document
Added timing, Iqxx, input bias tri-temp graphs; updated min. timing parameter; updated actual
part marking;
Io+ and Io- unit corrected (from uA to A)
Test condition changed (from 7V to 9.8V) in table of Stat el char, Vih and Vil.
Iqcc and Iqbs specified also at 18V and at 20V of supply voltage.
Tr and tf typ and max changed.
Abs Max Rat: Vs Max changed from VB+20 to VB+0.3
Stat Elec Char:
“IIN and IO parameters are referenced to COM” sentence modified in heading.
Io changed from 0 to 2 mA in VOH and VOL test conditions.
I/O Pin Eq Cir Diag: clamp voltage values changed from 25V to 20V.
Changed MT max to 25nS from 15nS; added temperature range spec: -40°C ≤ Tj ≤ 125°C on top
of statics and dynamic electrical characteristics tables.
Added typ. and max. value for Iqcc_18, Iqcc_20, Iqbs_18, Iqbs_20, and their tri-temp graphs;
added guranteed by design note for IO+/Added CDM ESD level to qual info page; Corrected Voh max. spec to 3.3V with test condition of
I0=2mA.
IIN+ Typ and max change; Io+ and Io- min added; tR and tF max change; Iqcc20 max = 2500uA
Ton max = 175ns, Toff max = 175ns.
VBSUV- change from 9.0V down to 8.8V
Added “Lead-Free and RoHS Compliant” to front page, updated latch up rating on qual info page;
updated “Important Notice” with latest version 2.
Added NTSOA
VOH parameter spitted into VOH 2mA and VOH 20mA
negVs SOA change introducing tri-temp info.
Page1: removed Plasma Display from typical application; Page 3 – removed “plasma display” from
description statement; Page 4 –removed note II from qual information page
www.irf.com
© 2012 International Rectifier
February 3, 2013