Type AVGA –40 °C to +105 °C High Capacitance SMT Aluminum Electrolytic Capacitors For Filtering, Bypassing and Power Supply Decoupling with High Capacitance Requirements Type AVGA Capacitors are rated for 2000 hours at 105 ºC and up to 63 Vdc. They are ideal for high density PC board packaging. The Type AVGA offers a low in-place-cost for a high quality performer. The vertical cylindrical cases facilitate automatic mounting and reflow soldering into the same footprint of like-rated tantalum capacitors except without the need for voltage derating. Type AVGA is RoHS compliant. Highlights • +105 °C, Up to 2000 Hours Load Life • Capacitance Range: 0.1 µF to 4700 µF • Voltage Range: 6.3 Vdc to 63 Vdc Specifications Operating Temperature: Rated Voltage: Capacitance: Capacitance Tolerance: Leakage Current (at 20 ºC): –40 °C to +105 °C 6.3, 10, 16, 25, 35, 50, 63 Vdc 0.1µF to 4700 µF ±20% @ 120 Hz and +20 °C 6.3 – 63 V 4 – 10 Ø I = 0.01 CV or 3 µA, whichever is greater, after 2 minutes at +20 ºC 12.5 ~ 16 Ø I = 0.03 CV or 4 µA, whichever is greater, after 2 minutes at +20 ºC I = leakage current Dissipation Factor: (Tan δ at 120 Hz, 20 ºC) C = rated capacitance in µF V = rated DC Working voltage in V Rated Voltage 6.3 10 16 25 35 50 63 4 ~ 10 Ø 0.45 0.35 0.28 0.18 0.16 0.14 0.12 12.5 ~ 16 Ø 0.4 0.38 0.34 0.26 0.22 0.18 0.14 When the capacitance exceeds 1000 µF, .02 shall be added for every 1000 µF increase Low Temperature Characteristic (at 120 Hz): Rated Voltage 6.3 10 16 25 35 50 63 4 3 2 2 2 2 2 Impedance /Z(+20 ºC) 12.5 ~ 16 Ø 5 Ratio Z(–40 ºC) 4 ~ 10 Ø 12 4 3 2 2 2 2 8 6 4 3 3 3 Z(–25 ºC) 4 ~ 10 Ø /Z(+20 ºC) 12.5 ~ 16 Ø 10 8 6 4 3 3 3 Impedance ratio shall not exceed the values given in the table above. Load Life Test: Test Time Capacitance Change 2,000 Hours 4 ~ 6.3 Ø : Within ±25 % of initial value 8 ~ 16 Ø : Within ±20 % of initial value Dissipation Factor < 200% of specified value Leakage Current Within specified value * The above specifications shall be satisfied when the capacitors are restored to 20 ºC after the rated voltage is applied for 2,000 hrs at 105 ºC Shelf LifeTest: Test time: 1000 hours; other items are the same as those for life test. Complies with the EU Directive 2002/95/EC requirement restricting the use of Lead (Pb), Mercury (Hg), Cadmium (Cd), Hexavalent chromium (Cr(VI)), PolyBrominated Biphenyls (PBB) and PolyBrominated Diphenyl Ethers (PBDE). CDE Cornell Dubilier • 1605 E. Rodney French Blvd. • New Bedford, MA 02744 • Phone: (508)996-8564 • Fax: (508)996-3830 • www.cde.com Type AVGA –40 °C to +105 °C High Capacitance SMT Aluminum Electrolytic Capacitors Outline Drawings, Case Code & Dimensions Table Fig. 1 B ± 0.2 ØD ± 0.5 L A ± 0.2 0.4 ±0.2 Case Ø D L Code (mm) (mm) W 0.3 Max C ±0.2 P C ±0.2 Fig. 2 B ± 0.2 ØD ± 0.5 L A ± 0.2 1.0 Max. A B C (mm) (mm) (mm) W P ±0.2 Fig. (mm) (mm) No. B 4.0 5.7 ±0.3 4.3 4.3 2.0 0.5 to 0.8 1.0 1 C 5.0 5.7 ±0.3 5.3 5.3 2.3 0.5 to 0.8 1.5 1 D 6.3 5.7 ±0.3 6.6 6.6 2.7 0.5 to 0.8 2.0 1 X 6.3 7.7 ±0.3 6.6 6.6 2.7 0.5 to 0.8 2.0 1 F 8.0 10 ±0.5 8.4 8.4 3.0 0.7 to 1.1 3.1 1 G 10.0 10 ±0.5 10.4 10.4 3.3 0.7 to 1.1 4.7 1 Q 10.0 10.3 ±0.5 10.4 10.4 3.3 0.7 to 1.1 4.7 1 H 12.5 13.5 ±0.5 12.8 12.8 4.9 1.1 to 1.4 4.2 2 L 12.5 12.8 12.8 4.9 1.1 to 1.4 4.2 2 P 16.0 16.5 ±0.5 16.3 16.3 5.8 1.1 to 1.4 6.0 2 16 ±0.5 W 0.4 Max. C ±0.2 P C ±0.2 Part Numbering System AVGA 227 M 25 F 24T –F Type Capacitance Capacitance Voltage Code Case Packaging Code RoHs AVGA 104 = .1 µF Code Tolerance M = ±20% Compliant 06 = 6.3 Vdc See 475 = 4.7 µF 10 = 10 Vdc Table 106 = 10.0 µF 16 = 16 Vdc T = Tape & Reel 227 = 220 µF 25 = 25 Vdc Y = Tray Pack 478 = 4700 µF 35 = 35 Vdc (available for H,L, & P case codes) 50 = 50 Vdc 24 = Carrier tap Width (mm) 63 = 63 Vdc CDE Cornell Dubilier • 1605 E. Rodney French Blvd. • New Bedford, MA 02744 • Phone: (508)996-8564 • Fax: (508)996-3830 • www.cde.com Type AVGA –40 °C to +105 °C High Capacitance SMT Aluminum Electrolytic Capacitors Ratings Max. Catalog Cap Part Number (µF) Max. DCL Max. DF Max. ESR Ripple Current Case Size Quantity @ 120 Hz @ 120 Hz/20 ºC @ 120 Hz/105 ºC Code DxL Per Reel (ohms) (ma) (mm) (ea) (µA) 6.3 Vdc (8 Vdc Surge) 47 AVGA476M06C12T-F 3.0 0.45 15.87 30 C 5x5.7 1000 100 AVGA107M06D16T-F 6.3 0.45 7.46 69 D 6.3x5.7 1000 220 AVGA227M06X16T-F 14 0.45 3.39 120 X 6.3x7.7 1000 330 AVGA337M06F24T-F 21 0.45 2.26 290 F 8x10 500 470 AVGA477M06F24T-F 30 0.45 1.59 320 F 8x10 500 1000 AVGA108M06G24T-F 63 0.45 0.75 410 G 10x10 500 2200 AVGA228M06H32T-F 416 0.42 0.32 680 H 12.5x13.5 200 3300 AVGA338M06L32T-F 624 0.44 0.22 850 L 12.5x16 150 4700 AVGA478M06P44T-F 888 0.46 0.16 1000 P 16x16.5 125 10 Vdc (13 Vdc Surge) 33 AVGA336M10C12T-F 3.3 0.35 17.58 30 C 5x5.7 1000 47 AVGA476M10D16T-F 4.7 0.35 12.35 48 D 6.3x5.7 1000 100 AVGA107M10D16T-F 10 0.35 5.80 69 D 6.3x5.7 1000 220 AVGA227M10X16T-F 22 0.35 2.64 120 X 6.3x7.7 1000 330 AVGA337M10F24T-F 33 0.35 1.76 290 F 8x10 500 470 AVGA477M10F24T-F 47 0.35 1.23 320 F 8x10 500 470 AVGA477M10G24T-F 47 0.35 1.23 410 G 10x10 500 1000 AVGA108M10Q24T-F 100 0.35 0.58 410 Q 10x10.3 500 2200 AVGA228M10L32T-F 660 0.40 0.30 750 L 12.5x16 150 3300 AVGA338M10P44T-F 990 0.42 0.21 1000 P 16x16.5 125 4700 AVGA478M10P44T-F 1410 0.44 0.16 1000 P 16x16.5 125 16 Vdc (20 Vdc Surge) 10 AVGA106M16B12T-F 3.0 0.28 46.42 17 B 4x5.7 2000 22 AVGA226M16C12T-F 3.5 0.28 21.10 30 C 5x5.7 1000 33 AVGA336M16D16T-F 5.3 0.28 14.07 45 D 6.3x5.7 1000 47 AVGA476M16D16T-F 7.5 0.28 9.88 48 D 6.3x5.7 1000 100 AVGA107M16D16T-F 16 0.28 4.64 69 D 6.3x5.7 1000 220 AVGA227M16X16T-F 35 0.28 2.11 120 X 6.3x7.7 1000 330 AVGA337M16F24T-F 53 0.28 1.41 290 F 8x10 500 470 AVGA477M16F24T-F 75 0.28 0.99 320 F 8x10 500 1000 AVGA108M16H32T-F 480 0.34 0.56 550 H 12.5x13.5 200 2200 AVGA228M16P44T-F 1056 0.36 0.27 950 P 16x16.5 125 3300 AVGA338M16P44T-F 1584 0.38 0.19 950 P 16x16.5 125 25 Vdc (32 Vdc Surge) 4.7 AVGA475M25B12T-F 3.0 0.18 63.49 13 B 4x5.7 2000 10 AVGA106M25C12T-F 3.0 0.18 29.84 23 C 5x5.7 1000 22 AVGA226M25D16T-F 5.5 0.18 13.56 38 D 6.3x5.7 1000 33 AVGA336M25D16T-F 8.3 0.18 9.04 50 D 6.3x5.7 1000 47 AVGA476M25D16T-F 12 0.18 6.35 60 D 6.3x5.7 1000 100 AVGA107M25X16T-F 25 0.18 2.98 100 X 6.3x7.7 1000 220 AVGA227M25F24T-F 55 0.18 1.36 320 F 8x10 500 330 AVGA337M25G24T-F 83 0.18 0.90 375 G 10x10 500 470 AVGA477M25G24T-F 118 0.18 0.64 410 G 10x10 500 1000 AVGA108M25L32T-F 750 0.26 0.43 550 L 12.5x16 150 2200 AVGA228M25P44T-F 1650 0.28 0.21 820 P 16x16.5 125 Contact factory for tray pack (Y) quantities CDE Cornell Dubilier • 1605 E. Rodney French Blvd. • New Bedford, MA 02744 • Phone: (508)996-8564 • Fax: (508)996-3830 • www.cde.com Type AVGA –40 °C to +105 °C High Capacitance SMT Aluminum Electrolytic Capacitors Max. Catalog Cap Part Number (µF) Max. DCL Max. DF Max. ESR Ripple Current Case Size Quantity @ 120 Hz @ 120 Hz/20 ºC @ 120 Hz/105 ºC Code DxL Per Reel (ohms) (ma) (mm) (ea) (µA) 4.7 10 22 33 47 100 220 330 470 1000 AVGA475M35B12T-F AVGA106M35C12T-F AVGA226M35D16T-F AVGA336M35D16T-F AVGA476M35X16T-F AVGA107M35F24T-F AVGA227M35G24T-F AVGA337M35Q24T-F AVGA477M35H32T-F AVGA108M35P44T-F 3.0 3.5 7.7 12 16 35 77 116 494 1050 0.16 0.16 0.16 0.16 0.16 0.16 0.16 0.16 0.22 0.22 0.1 0.22 0.33 0.47 1.0 2.2 3.3 4.7 10 22 33 47 100 100 220 330 470 AVGA104M50B12T-F AVGA224M50B12T-F AVGA334M50B12T-F AVGA474M50B12T-F AVGA105M50B12T-F AVGA225M50B12T-F AVGA335M50B12T-F AVGA475M50C12T-F AVGA106M50D16T-F AVGA226M50D16T-F AVGA336M50X16T-F AVGA476M50X16T-F AVGA107M50F24T-F AVGA107M50G24T-F AVGA227M50Q24T-F AVGA337M50H32T-F AVGA477M50L32T-F 3.0 3.0 3.0 3.0 3.0 3.0 3.0 3.0 5.0 11 17 24 50 50 110 165 235 0.14 0.14 0.14 0.14 0.14 0.14 0.14 0.14 0.14 0.14 0.14 0.14 0.14 0.14 0.14 0.18 0.18 0.47 1 2.2 3.3 4.7 10 22 33 47 47 100 220 330 470 AVGA474M63B12T-F AVGA105M63B12T-F AVGA225M63B12T-F AVGA335M63C12T-F AVGA475M63D16T-F AVGA106M63D16T-F AVGA226M63X16T-F AVGA336M63F24T-F AVGA476M63F24T-F AVGA476M63G24T-F AVGA107M63Q24T-F AVGA227M63H32T-F AVGA337M63P44T-F AVGA477M63P44T-F 3.0 3.0 3.0 3.0 3.0 6.3 14 21 30 30 63 416 624 888 0.12 0.12 0.12 0.12 0.12 0.12 0.12 0.12 0.12 0.12 0.12 0.14 0.14 0.14 35 Vdc (44 Vdc Surge) 56.44 26.53 12.06 8.04 5.64 2.65 1.21 0.80 0.78 0.36 50 Vdc (63 Vdc Surge) 2320.96 1054.98 703.32 493.82 232.10 105.50 70.33 49.38 23.21 10.55 7.03 4.94 2.32 2.32 1.06 0.90 0.64 63 Vdc (79 Vdc Surge) 423.27 198.94 90.43 60.28 42.33 19.89 9.04 6.03 4.23 4.23 1.99 1.06 0.70 0.49 16 27 44 54 80 320 375 410 520 750 B C D D X F G Q H P 4x5.7 5x5.7 6.3x5.7 6.3x5.7 6.3x7.7 8x10 10x10 10x10.3 12.5x13.5 16x16.5 2000 1000 1000 1000 1000 500 500 500 200 125 2 3 4 5 10 16 18 20 32 47 65 80 230 375 375 500 550 B B B B B B B C D D X X F G Q H L 4x5.7 4x5.7 4x5.7 4x5.7 4x5.7 4x5.7 4x5.7 5x5.7 6.3x5.7 6.3x5.7 6.3x7.7 6.3x7.7 8x10 10x10 10x10.3 12.5x13.5 12.5x16 2000 2000 2000 2000 2000 2000 2000 1000 1000 1000 1000 1000 500 500 500 200 150 5 8 12 17 22 32 58 140 170 310 310 470 700 700 B B B C D D X F F G Q H P P 4x5.7 4x5.7 4x5.7 5x5.7 6.3x5.7 6.3x5.7 6.3x7.7 8x10 8x10 10x10 10x10.3 12.5x13.5 16x16.5 16x16.5 2000 2000 2000 1000 1000 1000 1000 500 500 500 500 200 125 125 Contact factory for tray pack (Y) quantities CDE Cornell Dubilier • 1605 E. Rodney French Blvd. • New Bedford, MA 02744 • Phone: (508)996-8564 • Fax: (508)996-3830 • www.cde.com Type AVGA –40 °C to +105 °C High Capacitance SMT Aluminum Electrolytic Capacitors Recommended Land Patterns by case size for AVGA series B A B C Case Code B C D X F G Q H L P Case Size 4x5.7 5x5.7 6.3x5.7 6.3x7.7 8x10 10x10 10x10.3 12.5x13.5 12.5x16 16x16.5 Land Dimensions (mm) C B A 1.6 2.6 1 1.6 3 1.4 1.6 3.5 1.9 1.6 3.5 1.9 2.5 3.5 3 2.5 4 4 2.5 4 4 4 7.5 7 4 7.5 7 6 8.5 9.5 CDE Cornell Dubilier • 1605 E. Rodney French Blvd. • New Bedford, MA 02744 • Phone: (508)996-8564 • Fax: (508)996-3830 • www.cde.com Type AVGA –40 °C to +105 °C High Capacitance SMT Aluminum Electrolytic Capacitors Recommended Soldering Methods Recommended Reflow Soldering Profile: For case diameters 4 thru 6.3 mm with voltage ratings of 6.3 to 50Vdc For case diameters 4 thru 6.3 mm with a voltage rating of 63 Vdc For case diameters 8 to 16 mm Case sizes 4 thru 6.3 mm dia. (4 to 50V) should be subjected to just one reflow soldering process. The 8 thru 16 mm dia. case sizes(and 4 thru 6.3 mm dia. at 63V) should be subjected to a maximum of two reflow soldering processes. Soldering with a solder iron should be performed with a maximum soldering iron tip temperature of 350±5°C for 3 to 4 seconds. CDE Cornell Dubilier • 1605 E. Rodney French Blvd. • New Bedford, MA 02744 • Phone: (508)996-8564 • Fax: (508)996-3830 • www.cde.com