AZ AZ762F 20 A SPST MINIATURE POWER RELAY WITH QUICK CONNECTS FEATURES • • • • • • • • High temperature operation 125°C Dielectric strength 5000 Vrms 10 kV surge withstand 20 Amp switching Low profile Quick connects, Horizontal or Vertical Class F (155°C) standard Isolation spacing greater than 10 mm UL, CUR file E44211, VDE 40006031 CONTACTS Arrangement SPST (1 Form A, 1 Form B) Ratings Resistive load: Max. switched power: 600 W or 5540 VA Max. switched current: 20 A Max. switched voltage: 150* VDC or 440 VAC *Note: If switching voltage is greater than 30 VDC, special precautions must be taken. Please contact the factory. Rated Load UL, CUR 20 A at 277 VAC general use, 100k cycles VDE 18 A at 250 VAC, Res., 20k cycles (N.O.) 16 A at 250 VAC, Res., 80k cycles 12 A at 400 VAC, Res., 80k cycles Material Silver nickel, (gold plating available) Resistance < 50 milliohms initially (using 6 V 1 A method) COIL Power At Pickup Voltage (typical) 196 mW Max. Continuous Dissipation 1.7 W at 20°C (68°F) ambient Temperature Rise 26°C (47°F) at nominal coil voltage Max. Temperature 155° (311°F) GENERAL DATA Life Expectancy Mechanical Electrical Minimum operations 1 x 107 1 x 105 at 20 A 277 VAC general use Operate Time (typical) 7 ms at nominal coil voltage Release Time (typical) 3 ms at nominal coil voltage (with no coil suppression) Dielectric Strength 5000 Vrms coil to contact (at sea level for 1 min.) 1000 Vrms between open contacts Insulation Resistance 1000 megohms min. at 20°C 500 VDC 50% RH Dropout Greater than 10% of nominal coil voltage Ambient Temperature Operating Storage At nominal coil voltage -40°C (-40°F) to 125°C (257°F) -40°C (-40°F) to 155°C (311°F) Vibration 0.062" DA at 10–55 Hz Shock 10 g Enclosure P.B.T. polyester Terminals Tinned copper alloy, P. C., QC Max. Solder Temp. 270°C (518°F) Max. Solder Time 5 seconds Max. Solvent Temp. 80°C (176°F) Max. Immersion Time 30 Seconds Weight 14 grams NOTES 1. All values at 20°C (68°F). 2. Relay may pull in with less than “Must Operate” value. 3. Specifications subject to change without notice. 7/17/07W AZ762F RELAY ORDERING DATA COIL SPECIFICATIONS Nominal Coil VDC 5 Must Operate VDC 3.5 ORDER NUMBER* Max. Continuous VDC 10.2 Coil Resistance 62 ± 10% Vertical Quick Connects AZ762FV–1AB–5DF Horizontal Quick Connects AZ762FH–1AB–5DF 6 4.2 12.3 90± 10% AZ762FV–1AB–6DF AZ762FH–1AB–6DF 12 8.4 24.7 360 ± 10% AZ762FV–1AB–12DF AZ762FH–1AB–12DF 24 16.8 49.4 1,440 ± 10% AZ762FV–1AB–24DF AZ762FH–1AB–24DF 48 33.6 98.0 5,760 ± 15% AZ762FV–1AB–48DF AZ762FH–1AB–48DF 60 42.0 112.9 7,500 ± 15% AZ762FV–1AB–60DF AZ762FH–1AB–60DF *Substitute “-1B” in place of “-1A” for 1 Form B. For gold plated contacts change “DF” to “DAF”. MECHANICAL DATA PC Board Layout Outline Dimensions Quick connect terminals horizontal Form A,B Quick connect terminals vertical Form A,B FORM A,B .559 [14.2] .020 [0.5] .031 [0.8] .161 [4.1] 1.614MAX [41.0MAX] BOTTOM VIEW 1.280 [32.5] .295 [7.5] .295 [7.5] .197 [5.0] .197 [5.00] .295 [7.50] .098 [2.50] 1.280 [32.5] 1.280 [32.50] 2-Ø.051 [Ø1.30] .031 [0.8] 1.614MAX [41.0MAX] 1.772MAX [45.0MAX] .161 [4.1] .020 [0.5] .512MAX [13.0] .248 [6.3] .512MAX [13.0] .630MAX [16.0] .012 [0.3] .248 [6.3] .591 [15.0] .630MAX [16.0] .012 [0.3] 1.240MAX [31.5] 1.142 [29.0] 1.240MAX [31.50] 1.142 [29.00] .098 [2.50] 4-Ø.059 [Ø1.50] .197 [5.0] BOTTOM VIEW Wiring Diagram Form A Form B Dimensions in inch with millimeters in brackets below. Tolerance: ± .010" 7/17/07W