PP 01-24 Toggle.qxd 5/6/02 1:51 PM Page 11 S E R I E S 100A SWITCHES PROCESS SEALED MINIATURE TOGGLE SWITCHES SPECIFICATIONS Contact Rating: Electrical Life: Contact Resistance: Dependent upon contact material 40,000 make-and-break cycles at full load 10 mΩ max. typical initial @ 2-4 VDC 100 mA for both silver and gold plated contacts 1,000 MΩ min. 1,000 V RMS @ sea level -30° C to 85° C Insulation Resistance: Dielectric Strength: Operating Temperature: MATERIALS Case & Bushing: Pedestal of Case: Actuator: Switch Support: Contacts / Terminals: PBT LPC Brass, chrome plated with internal O-ring seal Brass or steel tin plated Silver or gold plated copper alloy HOW TO ORDER Series Model No. Actuator Bushing Termination Contact Material Seal SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE. 100A 200 E WSP1 WSP2 WSP3 WSP4 WSP5 WDP1 WDP2 WDP3 WDP4 WDP5 T1 T2 B1 B4 M1 M2 M5 M6 M7 VS2 VS3 M61 M64 M71 VS21 VS31 Q=Silver R=Gold WDP4 T1 B4 M1 R EXAMPLE 100A POS 1 Model No. SPDT POS 3 WSP-1 ON NONE ON WSP-2 ON NONE (ON) WSP-3 ON OFF ON WSP-4 (ON) OFF (ON) WSP-5 ON OFF (ON) Term. Comm. 2-3 OPEN 2-1 Schematic 2 Comm. 1 Phone: 763-504-3525 POS 2 3 Fax: 763-531-8235 E 6.11 [.241] 5.30 [.209] FLAT 6.90 [.272] ( ) = Momentary 12.80 [.504] www.e -switch.com info@e-switch.com 11 PP 01-24 Toggle.qxd 5/6/02 1:51 PM Page 12 S E R I E S 100A SWITCHES PROCESS SEALED MINIATURE TOGGLE SWITCHES DPDT Model No. POS 1 POS 2 POS 3 WDP-1 ON NONE ON WDP-2 ON NONE (ON) WDP-3 ON OFF ON WDP-4 (ON) OFF (ON) WDP-5 ON OFF (ON) Term. Comm. 2-3, 5-6 OPEN 2-1, 5-4 Schematic 2 Comm 1 3 4 6.11 [.241] 5.30 [.209] FLAT 11.50 [.453] ( ) = Momentary 5 Comm. 12.80 [.504] 6 T1 T2 T1 actuator std. when ordered with M1 termination. Add 0.100 (2.54) for B4 bushing. T2 actuator std. when ordered with VS, M2, M6 or M7 terminations. Add 0.100 (2.54) for B4 bushing. BUSHING OPTIONS B1 B4 Std for M1 Std for M2, M6, M7, VS termination SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE. ACTUATOR OPTIONS TERMINATION OPTIONS M2 M1 12 Phone: 763-504-3525 Fax: 763-531-8235 www.e -switch.com info@e-switch.com PP 01-24 Toggle.qxd 5/6/02 1:51 PM Page 13 S E R I E S 100A SWITCHES PROCESS SEALED MINIATURE TOGGLE SWITCHES 2.92 [.115] SWITCH SUPPORT .40MM THK. 1.27 [.050] (2 PL) 5.08 [.200] 12.9 [.508] 4.70 [.185] TYP 6.17 [.243] 5.30 [.209] 12.70 [.500] 2.69 [.106] 6.90 [.272] 1 M6 P.C. MOUNTING POS. 2 POS. 3 POS. 1 2 3.17 [.125] 3 EPOXY SEAL 4.70 [.185] TYP 12.70 [.500] SPDT HOLE 1.85 [.073] (3 PL) 3X 0.76 [.030] P.C. MOUNTING POS. 2 POS. 3 POS. 1 2.92 [.115] 5.08 [.200] 11.50 [.453] 2.69 [.106] 1 EPOXY SEAL 3.81 [.150] 4.70 [.185] TYP. 5.08 [.200] 3.17 [.125] 12.70[.50 3.81 [.150] 12.70 [.500] DPDT 12.70 [.500] 6.17 [.243] 5.30 [.209] M6 SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE. SWITCH SUPPORT .40MM THK. 1.27 [.050] (2 PL) 12.9 [.508] 1.85 [.073] (8 PL) 0.76 [.030] (3 PL) 4.70 [.185] TYP 25° POS. 2 POS. 1 POS. 3 6.03 [.237] 1.27 [.050] (2 PL) 7.62 [.300] SWITCH SUPPORT .40MM THK. 5.30 [.209] 5.08 [.200] 6.18 [.243] 12.70 [.500] 1.52 10.42 0 [.410] 12.70 [.500] 3.81 [.150] TYP. P.C. MOUNTING 2.67 [.105] 5.08 [.200] 1 2 EPOXY SEAL 3 3 HOLE 1.85 [.073] (5 PL) 1.27 X 0.76 THK. 2.69 TYP. [.050 X .030 ] (3 PL) 4.50 [.177] TYP. M7 3.81 [.150] TYP SPDT 25° P.C. MOUNTING 2.67 [.105] POS. 2 POS. 1 P POS. 3 7.62 [.300] 6.03 [.237] 1.27 [.050] (2 PL) SWITCH SUPPORT .40MM THK. 6.18 [.243] 10.42 [.410] 11.50 [.453] 12.70 [.500] 5.08 [.200] 5.30 [.209] 3.17 [.125] 12.80 [.504] M7 3.81 [.150] TYP. 4 5 6 3 EPOXY SEAL 3.81 [.150] TYP 4.83 [.190] 5.08 [.200] 6 2.69 TYP. 2 1.27 X 0.76 THK. 4.50 [.050 X .030 ] [.177] TYP. (6 PL) 12.70 [.500] 1.52 HOLE 1.85 [.073] (8 PL) 4.83 [.190] (6 PL) DPDT Phone: 763-504-3525 Fax: 763-531-8235 www.e -switch.com info@e-switch.com 13 PP 01-24 Toggle.qxd 5/6/02 1:51 PM Page 14 S E R I E S 100A SWITCHES PROCESS SEALED MINIATURE TOGGLE SWITCHES 25° P.C. MOUNTING 2.67 [.105] POS. 2 POS. 3 POS. 1 7.62 [.300] E-SWITCH MARKING ON OPPOSITE SIDE 5.66 [.223] Epoxy Seal Base VS2-VS3 DIM. ‘A’ VS2 .460 (11.68) VS3 .630 (16.00) 4.70 [.185] 1 4.70 [.185] Typ. 15.75 5 [.620] SPDT OPTION CODE 0.51 [.020] Typ. 9.40 [.370] 3.18 [.125] 1.27 [.050] 1.85 [.073] HOLE (7 PL) 15.75 1 5 [.620] 3.18 [.125] [.320] P.C. MOUNTING 2.67 [.105] 7.62 [.300] E-SWITCH MARKING ON OPPOSITE SIDE 5.66 [.223] A CRIMPED BRACKET VS2-VS3 DPDT OPTION CODE DIM. ‘A’ VS2 .460 (11.68) VS3 .630 (16.00) 3.18 [.125] 4.70 [.185] Epoxy Seal Base 4.70 [.185] Typ. 0.51 [.020] Typ. 15.75 5 [.620] 9.40 [.370] 15.75 5 [.620] 1.27 [.050] 3.18 [.125] 8.13 [.320] CONTACT MATERIAL OPTIONS Q R Fixed Terminal: Gold flash over silver plated Fixed Terminal: Copper alloy with gold plate over copper alloy nickel plate Moving Contact: Silver plated copper alloy Rating: 5 Amps with resistive load @ 120VAC or 28VDC; nickel plate 2 Amps with resistive load @ 250VAC Rating: 0.4 Volt-Amps (VA) max. @ 20V max. (AC or DC) Moving Contact: Copper alloy with gold plate over 1.85 [.073] HOLE (7 PL) SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE. POS. 2 POS. 3 POS. 1 25° HARDWARE HDW2 Nut HDW15 11.89 [.468] .00 [.079] 14 Phone: 763-504-3525 Fax: 763-531-8235 Locking Ring HDW11 Lock Washer 0.74 [.029] 2.39 [.094] www.e -switch.com info@e-switch.com