FILE NAME: B100 RevB.DOC, REVISION: January 19, 2007 V15 B100 SERIES 1WATT DC-DC CONVERTERS FEATURE * Industry Standard SIP and SMD Packages * Efficiency up to 82% * 1000VDC Isolation * Low Cost * Unregulated Outputs * Low Ripple and Noise MODEL NUMBER INPUT OUTPUT VOLTAGE VOLTAGE B100 SERIES OUTPUT CURRENT INPUT CURRENT ％ NO LOAD FULL LOAD EFF. CASE B101 B102 B103 5 VDC 5 VDC 5 VDC 5 VDC 12 VDC 15 VDC 200 mA 84 mA 67 mA 40 mA 40 mA 40 mA 250mA 252mA 250mA 80 80 80 Miniature B108 5 VDC ±12 VDC 42 mA 40 mA 255mA 79 Miniature B109 5 VDC ±15 VDC 33 mA 40 mA 251mA 79 Miniature B107 5 VDC ±5 VDC 100 mA 40 mA 267mA 75 Miniature B111 B112 B113 12 VDC 12 VDC 12 VDC 5 VDC 12 VDC 15 VDC 200 mA 84 mA 67 mA 15 mA 15 mA 15 mA 103mA 102mA 102mA 81 82 82 Miniature Miniature Miniature B118 12 VDC ±12 VDC 42 mA 15 mA 104mA 81 Miniature B119 12 VDC ±15 VDC 33 mA 15 mA 101mA 82 Miniature B117 12 VDC ±5 VDC 100 mA 15 mA 107mA 78 Miniature NOTE : 1. Nominal Input Voltage 5 or 12 VDC -1- Miniature Miniature FILE NAME: B100 RevB.DOC, REVISION: January 19, 2007 V15 SPECIFICATIONS All Specifications Typical At Nominal Line, Full Load, and 25℃ Unless Otherwise Noted INPUT SPECIFICATIONS : GENERAL SPECIFICATIONS : Input Voltage Range....……………................................................10% Efficiency...........................................………..…………............See Table Isolation Voltage...................................……..……….........1000 VDC min. Isolation Resistance .....................…….………….………10^9 Ohms min. Switching Frequency .............................……......................100KHz typ. Input Filter ……………………………………………..………Capacitive OUTPUT SPECIFICATIONS : Operating Ambient Temperature Range...………...…….... -40℃ to +85℃ Voltage Accuracy…………………....……………….........…±3.0% max. De-rating, Above 85℃ …………..……… Linearly to Zero power at 100℃ Ripple and Noise, 20MHz BW....SIP Models......……..75mV p-p max. Case temperature (Note5)………..………….………..…..…...+100℃ max. Cooling………………………………………..….………..Natural Convection SMD Models……....120mV p-p max. Temperature Coefficient....................….………….......±0.05%/C max. Short Circuit Protection...................….…………Momentary 1sec. max. Storage Temperature Range ...…............………....…....... -55℃ to +125℃ Dimensions: SIP Models………….0.77 x 0.24 x 0.40inches(19.5 x 6.1 x 10.2mm) Line Regulation, Note1..….………...…………………….....±1.2% max. SMD Models(Single)…..0.5 x 0.31 x 0.27inches(12.7 x 8.0 x 6.8mm) SMD Models(Dual)…. 0.6 x 0.31 x 0.27inches(15.24 x 8.0 x 6.8mm) Case Material………..SIP Models………Non-conductive black plastic Load Regulation, Note2…………………..........…………....±10% max. SMD Models………….Epoxy molding compound Weight………..……………………………………………………………..1.8g NOTE : 1. Line regulation is per 1.0% change in input voltage 2. Load regulation is for load change from 100% to 20% 3. The output noise is measured with 0.33uF ceramic capacitor. 4. Suffix “S” to the model number with SMD packages 5. Maximum case temperature under any operating condition should not be exceeded 100℃. Typical Derating curve for Natural Convection 120% Dimensions: LOAD(%) 100% Al l Di mensi ons I n I nches( mm) Tol er ance I nches Mi l l i met er s X. XX±0. 01 X. X±0. 25 X. XXX±0. 005 X. XX±0. 13 ±0. 002 ±0. 05 Pi n SI P PACKAGES PIN CONNECTION Pin Single Output Dual Output 1 +Vin +Vin -Vin 2 -Vin -Vout -Vout 4 No Pin Common 5 +Vout +Vout 6 NA:Not Available for Electrical Connection 80% 60% Natural Convection 40% 20% 0% -40 SMD PACKAGES PIN CONNECTION Single Output Pin 1 -Vin 2 +Vin No Pin 3 -Vout 4 +Vout 5 6 No Pin No Pin 7 8 NA -20 0 20 40 60 Ambient Temperature(oC) PIN CONNECTION Dual Output Pin 1 -Vin +Vin 2 No Pin 3 4 Common 5 -Vout NA 6 +Vout 7 No Pin 8 No Pin 9 NA 10 -2- 80 100