Multilayer Ceramic Capacitors Series/Type: B37953 The following products presented in this data sheet are being withdrawn. Ordering Code B37953K5104K062 B37953K5104K072 B37953K5224K062 Substitute Product Date of Withdrawal 2008-08-01 2008-08-01 2008-08-01 Deadline Last Orders 2009-07-31 2009-07-31 2009-07-31 Last Shipments 2009-10-31 2009-10-31 2009-10-31 Ordering Code B37953K5224K072 B37953K5334K062 B37953K5334K072 B37953K5474K062 B37953K5474K072 B37956K5474K062 B37956K5474K072 B37956K5105K062 B37956K5105K072 Substitute Product Date of Withdrawal 2008-08-01 2008-08-01 2008-08-01 2008-08-01 2008-08-01 2008-08-01 2008-08-01 2008-08-01 2008-08-01 Deadline Last Orders 2009-07-31 2009-07-31 2009-07-31 2009-07-31 2009-07-31 2009-07-31 2009-07-31 2009-07-31 2009-07-31 Last Shipments 2009-10-31 2009-10-31 2009-10-31 2009-10-31 2009-10-31 2009-10-31 2009-10-31 2009-10-31 2009-10-31 For further information please contact your nearest EPCOS sales office, which will also support you in selecting a suitable substitute. The addresses of our worldwide sales network are presented at www.epcos.com/sales. Multilayer ceramic capacitors Chip X7R Ordering code system B37941 K 5 102 K 0 60 Packaging 60 62 70 72 01 ^ ^ ^ ^ ^ cardboard tape, 180-mm reel blister tape, 180-mm reel cardboard tape, 330-mm reel blister tape, 330-mm reel bulk case Internal coding Capacitance tolerance J ^ ± 5% K ^ ±10% (standard) M ^ ±20% Capacitance, coded (example) Rated voltage Termination Standard: On request: 102 ^ 10 · 102 pF = 1 nF 104 ^ 10 · 104 pF = 100 nF 223 ^ 22 · 103 pF = 22 nF Rated voltage [VDC] Code 16 9 25 0 50 5 100 1 200 2 500 3 K ^ nickel barrier for all case sizes J ^ silver-palladium for conductive adhesion: all case sizes Type and size Chip size (inch / mm) Temperature characteristic X7R 0603 / 1608 0805 / 2012 1206 / 3216 1210 / 3225 1812 / 4532 2220 / 5750 B37931 B37941 B37872 B37950 B37953 B37956 Please read Cautions and warnings and Important notes at the end of this document. 2 10/06 Chip Multilayer ceramic capacitors X7R Features ■ ■ ■ ■ ■ High volumetric efficiency Non-linear capacitance change High insulation resistance High pulse strength To AEC-Q200 Applications ■ Blocking and coupling ■ Decoupling ■ Interference suppression Termination ■ For soldering: Nickel barrier termination (Ni) ■ For conductive adhesion: Silver-palladium termination (AgPd) on request Options ■ Alternative capacitance tolerances available on request Delivery mode ■ Cardboard and blister tape (blister tape for chip thickness ³1.2 ± 0.1 mm and case sizes ³1210), 180-mm and 330-mm reel available ■ Bulk case for case sizes 0603 (16 V, 25 V, 50 V) and 0805 (50 V) Electrical data Temperature characteristic Max. relative capacitance change within –55 °C to +125 °C Climatic category (IEC 60068-1) Standard Dielectric Rated voltage1) Test voltage Capacitance range2) / E series Dissipation factor (limit value) X7R DC/C VR Vtest CR tan d Insulation resistance 3) at + 25 °C Insulation resistance 3) at +125 °C Time constant 3) at + 25 °C Time constant 3) at +125 °C Operating temperature range Ageing 4) 1) Note: No operation on AC line. 2) See also chapter “HighCV”. Please read Cautions and warnings and Important notes at the end of this document. Rins Rins t t Top ±15 55/125/56 EIA Class 2 16, 25, 50, 100, 200, 500 2.5 · VR/5 s 100 pF … 1 µF (E3/E6) < 25 · 10 –3 < 35 · 10 –3 for 16 V >105 >104 >1000 >100 –55 … +125 yes % VDC VDC MW MW s s °C 3) For CR >10 nF the time constant t = C · Rins is given. 4) Refer to chapter “General technical information”, “Ageing”. 3 10/06 Multilayer ceramic capacitors X7R X7R Capacitance tolerances Code letter J K M (standard) Tolerance ± 5% ±10% ± 20% Dimensional drawing s b k k KKE0329-N Dimensions (mm) Case size 0603 1608 0805 2012 1206 3216 l 1.6 ± 0.15 2.00 ± 0.20 3.20 ± 0.20 b 0.8 ± 0.10 1.25 ± 0.15 1.60 ± 0.15 s 0.8 ± 0.10 1.35 max. 1.30 max. k 0.1 –0.40 0.13 –0.75 0.25 –0.75 1210 3225 1812 4532 2220 5750 l 3.20 ± 0.30 4.50 ± 0.30 5.7 ± 0.40 b 2.50 ± 0.30 3.20 ± 0.30 5.0 ± 0.40 s 1.70 max. 1.30 max. 1.30 max. k 0.25 –0.75 0.25 –1.0 0.25 –1.0 Case size (inch) (mm) (inch) (mm) Tolerances to CECC 32101-801 Please read Cautions and warnings and Important notes at the end of this document. 4 10/06 Multilayer ceramic capacitors X7R X7R Recommended solder pad C A D KKE0308-1 Recommended dimensions (mm) for reflow soldering Case size (inch/mm) Type A C D 0603/1608 single chip 0.6 … 0.7 1.8 … 2.2 0.6 … 0.8 0805/2012 single chip 0.6 … 0.7 2.2 … 2.6 0.8 … 1.1 1206/3216 single chip 0.8 … 0.9 3.8 … 4.32 1.0 … 1.4 1210/3225 single chip 1.0 … 1.2 4.0 … 4.8 1.8 … 2.3 1812/4532 single chip 1.2 … 1.4 5.4 … 6.3 2.3 … 3.0 2220/5750 single chip 1.4 … 1.6 6.8 … 7.8 3.5 … 4.8 Recommended dimensions (mm) for wave soldering Case size (inch/mm) Type A C D 0603/1608 single chip 0.8 … 0.9 2.2 … 2.8 0.6 … 0.8 0805/2012 single chip 0.9 … 1.0 2.8 … 3.2 0.8 … 1.1 1206/3216 single chip 1.0 … 1.1 4.2 … 4.8 1.0 … 1.4 Termination Termination (nickel barrier) Ceramic body Inner electrode NME AgPd BME Ni Substrate electrode Intermediate electrode External electrode NME Ag Ni Sn BME Cu Ni Sn NME: Noble Metal Electrode BME: Base Metal Electrode KKE0485-5-E Please read Cautions and warnings and Important notes at the end of this document. 5 10/06 X7R Multilayer ceramic capacitors X7R Product range chip capacitors, X7R Size1) inch mm Type VR (VDC) CR 0805 2012 B37931 B37941 50 100 16 Please read Cautions and warnings and Important notes at the end of this document. 6 10/06 100 pF 120 pF 2) 150 pF 180 pF 2) 220 pF 270 pF 2) 330 pF 390 pF 2) 470 pF 560 pF 2) 680 pF 820 pF 2) 16 0603 1608 25 1.0 nF 1.2 nF 2) 1.5 nF 1.8 nF 2) 2.2 nF 2.7 nF 2) 3.3 nF 3.9 nF 2) 4.7 nF 5.6 nF 2) 6.8 nF 8.2 nF 2) 1) l ´ b (inch) / l ´ b (mm) 2) Non standard types (E 12) on request. 25 50 100 200 Multilayer ceramic capacitors X7R X7R Product range chip capacitors, X7R Size1) inch mm Type VR (VDC) CR 10 nF 12 nF 2) 15 nF 18 nF 2) 22 nF 27 nF 2) 33 nF 39 nF 2) 47 nF 56 nF 2) 68 nF 82 nF 2) 100 nF 220 nF 330 470 16 0603 1608 0805 2012 B37931 B37941 25 50 100 16 25 50 3) 3) 3) 3) 3) 3) 3) nF 3) 3) 3) nF 3) 3) 3) 1.0 mF 3) 3) 3) 2.2 mF 1) l ´ b (inch) / l ´ b (mm) 2) Non standard types (E 12) on request. 3) See HighCV product range for specification. Please read Cautions and warnings and Important notes at the end of this document. 7 10/06 100 200 X7R Multilayer ceramic capacitors X7R Product range chip capacitors, X7R Size1) inch mm 1206 3216 Type VR (VDC) CR 100 pF 120 pF 2) 150 pF 180 pF 2) 220 pF 270 pF 2) 330 pF 390 pF 2) 470 pF 560 pF 2) 680 pF 820 pF 2) B37872 16 25 50 100 1.0 nF 1.2 nF 2) 1.5 nF 1.8 nF 2) 2.2 nF 2.7 nF 2) 3.3 nF 3.9 nF 2) 4.7 nF 5.6 nF 2) 6.8 nF 8.2 nF 2) 1) l ´ b (inch) / l ´ b (mm) 2) Non standard types (E 12) on request. Please read Cautions and warnings and Important notes at the end of this document. 8 10/06 200 500 Multilayer ceramic capacitors X7R X7R Product range chip capacitors, X7R Size1) inch mm 1206 3216 Type VR (VDC) CR 10 nF 12 nF 2) 15 nF 18 nF 2) 22 nF 27 nF 2) 33 nF 39 nF 2) 47 nF 56 nF 2) 68 nF 82 nF 2) 100 nF 220 nF 330 nF 470 nF B37872 16 25 1.0 mF 3) 3) 2.2 mF 3) 3) 50 100 3) 1) l ´ b (inch) / l ´ b (mm) 2) Non standard types (E 12) on request. 3) See HighCV product range for specification. Please read Cautions and warnings and Important notes at the end of this document. 9 10/06 200 500 X7R Multilayer ceramic capacitors X7R Product range chip capacitors, X7R Size1) inch mm Type VR (VDC) CR 50 1210 3225 1812 4532 2220 5750 B37950 B37953 B37956 50 50 100 200 500 1.0 nF 1.5 nF 2.2 nF 3.3 nF 3.9 nF 4.7 nF 6.8 nF 10 nF 15 nF 22 nF 33 nF 47 nF 68 nF 100 nF 150 nF 220 nF 330 nF 470 nF 1.0 mF 1) l ´ b (inch) / l ´ b (mm) Please read Cautions and warnings and Important notes at the end of this document. 10 10/06 Multilayer ceramic capacitors X7R X7R; 0603 Ordering codes and packing for X7R, 16 and 25 VDC, nickel barrier terminations mm Cardboard tape, Æ 180-mm reel ** ^ 60 pcs/reel Cardboard tape, Bulk case Æ 330-mm reel ** ^ 70 ** ^ 01 pcs/reel pcs 0.8 ± 0.1 0.8 ± 0.1 0.8 ± 0.1 0.8 ± 0.1 0.8 ± 0.1 4000 4000 4000 4000 4000 16000 16000 16000 16000 16000 15000 15000 15000 15000 15000 0.8 ± 0.1 0.8 ± 0.1 0.8 ± 0.1 0.8 ± 0.1 0.8 ± 0.1 0.8 ± 0.1 0.8 ± 0.1 4000 4000 4000 4000 4000 4000 4000 16000 16000 16000 16000 16000 16000 16000 15000 15000 15000 15000 15000 15000 15000 Chip thickness CR1) Ordering code 2) Case size 0603, 16 VDC 22. 33. 47. 68. 100. nF nF nF nF nF B37931K9223K0** B37931K9333K0** B37931K9473K0** B37931K9683K0** B37931K9104K0** Case size 0603, 25 VDC 10. 15. 22. 33. 47. 68. 100. nF nF nF nF nF nF nF B37931K0103K0** B37931K0153K0** B37931K0223K0** B37931K0333K0** B37931K0473K0** B37931K0683K0** B37931K0104K0** 1) Other capacitance values on request. 2) The table contains the ordering codes for the standard capacitance tolerance. For other available capacitance tolerances see page 4. Please read Cautions and warnings and Important notes at the end of this document. 11 10/06 X7R Multilayer ceramic capacitors X7R; 0603 Ordering codes and packing for X7R, 50 VDC, nickel barrier terminations Chip thickness CR Ordering code 1) Case size 0603, 50 VDC 220. pF B37931K5221K0** 270. pF 2) B37931K5271K0** 330. pF B37931K5331K0** 2) 390. pF B37931K5391K0** 470. pF B37931K5471K0** 2) 560. pF B37931K5561K0** 680. pF B37931K5681K0** 2) 820. pF B37931K5821K0** 1.0 nF B37931K5102K0** 1.2 nF 2) B37931K5122K0** 1.5 nF B37931K5152K0** 2) 1.8 nF B37931K5182K0** 2.2 nF B37931K5222K0** 2) 2.7 nF B37931K5272K0** 3.3 nF B37931K5332K0** 2) 3.9 nF B37931K5392K0** 4.7 nF B37931K5472K0** B37931K5562K0** 5.6 nF 2) 6.8 nF B37931K5682K0** 2) 8.2 nF B37931K5822K0** 10. nF B37931K5103K0** 2) 12 nF B37931K5123K0** 15. nF B37931K5153K0** 2) 18 nF B37931K5183K0** 22. nF B37931K5223K0** 27 nF 2) B37931K5273K0** 33. nF B37931K5333K0** 2) 39 nF B37931K5393K0** 47. nF B37931K5473K0** Cardboard tape, Cardboard tape, Bulk case Æ 180-mm reel Æ 330-mm reel ** ^ 60 ** ^ 70 ** ^ 01 mm pcs/reel pcs/reel pcs 0.8 ± 0.1 0.8 ± 0.1 0.8 ± 0.1 0.8 ± 0.1 0.8 ± 0.1 0.8 ± 0.1 0.8 ± 0.1 0.8 ± 0.1 0.8 ± 0.1 0.8 ± 0.1 0.8 ± 0.1 0.8 ± 0.1 0.8 ± 0.1 0.8 ± 0.1 0.8 ± 0.1 0.8 ± 0.1 0.8 ± 0.1 0.8 ± 0.1 0.8 ± 0.1 0.8 ± 0.1 0.8 ± 0.1 0.8 ± 0.1 0.8 ± 0.1 0.8 ± 0.1 0.8 ± 0.1 0.8 ± 0.1 0.8 ± 0.1 0.8 ± 0.1 0.8 ± 0.1 4000 4000 4000 4000 4000 4000 4000 4000 4000 4000 4000 4000 4000 4000 4000 4000 4000 4000 4000 4000 4000 4000 4000 4000 4000 4000 4000 4000 4000 16000 16000 16000 16000 16000 16000 16000 16000 16000 16000 16000 16000 16000 16000 16000 16000 16000 16000 16000 16000 16000 16000 16000 16000 16000 16000 16000 16000 16000 15000 15000 15000 15000 15000 15000 15000 15000 15000 15000 15000 15000 15000 15000 15000 15000 15000 15000 15000 15000 15000 15000 15000 15000 15000 15000 15000 15000 15000 1) The table contains the ordering codes for the standard capacitance tolerance. For other available capacitance tolerances see page 4. 2) Non standard types (E 12) on request. Please read Cautions and warnings and Important notes at the end of this document. 12 10/06 Multilayer ceramic capacitors X7R X7R; 0603 Ordering codes and packing for X7R, 100 VDC, nickel barrier terminations Chip thickness CR1) Ordering code 2) Case size 0603, 100 VDC 100. pF B37931K1101K0** 150. pF B37931K1151K0** 220. pF B37931K1221K0** 330. pF B37931K1331K0** 470. pF B37931K1471K0** 680. pF B37931K1681K0** 1.0 nF B37931K1102K0** 1.5 nF B37931K1152K0** 2.2 nF B37931K1222K0** 3.3 nF B37931K1332K0** 4.7 nF B37931K1472K0** Cardboard tape, Cardboard tape, Bulk case Æ 180-mm reel Æ 330-mm reel ** ^ 60 ** ^ 70 ** ^ 01 mm pcs/reel pcs/reel pcs 0.8 ± 0.1 0.8 ± 0.1 0.8 ± 0.1 0.8 ± 0.1 0.8 ± 0.1 0.8 ± 0.1 0.8 ± 0.1 0.8 ± 0.1 0.8 ± 0.1 0.8 ± 0.1 0.8 ± 0.1 4000 4000 4000 4000 4000 4000 4000 4000 4000 4000 4000 16000 16000 16000 16000 16000 16000 16000 16000 16000 16000 16000 – – – – – – – – – – – 1) Other capacitance values on request. 2) The table contains the ordering codes for the standard capacitance tolerance. For other available capacitance tolerances see page 4. Please read Cautions and warnings and Important notes at the end of this document. 13 10/06 X7R Multilayer ceramic capacitors X7R; 0805 Ordering codes and packing for X7R, 25 and 50 VDC, nickel barrier terminations mm Cardboard tape, Æ 180-mm reel ** ^ 60 pcs/reel Cardboard tape, Bulk case Æ 330-mm reel ** ^ 70 ** ^ 01 pcs/reel pcs 0.8 ± 0.1 1.25 ± 0.1 4000 30003) 16000 12000 4) – – 0.6 ± 0.1 0.6 ± 0.1 0.6 ± 0.1 0.6 ± 0.1 0.6 ± 0.1 0.6 ± 0.1 0.6 ± 0.1 0.6 ± 0.1 0.6 ± 0.1 0.6 ± 0.1 0.6 ± 0.1 0.6 ± 0.1 0.6 ± 0.1 0.6 ± 0.1 0.6 ± 0.1 0.6 ± 0.1 0.6 ± 0.1 0.6 ± 0.1 0.6 ± 0.1 0.6 ± 0.1 0.6 ± 0.1 0.6 ± 0.1 0.6 ± 0.1 0.6 ± 0.1 0.6 ± 0.1 0.8 ± 0.1 0.8 ± 0.1 1.25 ± 0.1 0.8 ± 0.1 0.8 ± 0.1 1.25 ± 0.1 5000 5000 5000 5000 5000 5000 5000 5000 5000 5000 5000 5000 5000 5000 5000 5000 5000 5000 5000 5000 5000 5000 5000 5000 5000 4000 4000 3000 3) 4000 4000 3000 3) 20000 20000 20000 20000 20000 20000 20000 20000 20000 20000 20000 20000 20000 20000 20000 20000 20000 20000 20000 20000 20000 20000 20000 20000 20000 16000 16000 12000 4) 16000 16000 12000 4) 10000 10000 10000 10000 10000 10000 10000 10000 10000 10000 10000 10000 10000 10000 10000 10000 10000 10000 10000 10000 10000 10000 10000 10000 10000 – – – – – – Chip thickness CR Ordering code 1) Case size 0805, 25 VDC 100. nF 100. nF B37941K0104K0** B37941K0104K0** Case size 0805, 50 VDC 470. pF 560. pF 2) 680. pF 820. pF 2) 1.0 nF 1.2 nF 2) 1.5 nF 1.8 nF 2) 2.2 nF 2.7 nF 2) 3.3 nF 3.9 nF 2) 4.7 nF 5.6 nF 2) 6.8 nF 8.2 nF 2) 10. nF 12 nF 2) 15. nF 18 nF 2) 22. nF 27 nF 2) 33. nF 39 nF 2) 47. nF 56 nF 2) 68. nF 68. nF 82 nF 2) 100. nF 100. nF B37941K5471K0** B37941K5561K0** B37941K5681K0** B37941K5821K0** B37941K5102K0** B37941K5122K0** B37941K5152K0** B37941K5182K0** B37941K5222K0** B37941K5272K0** B37941K5332K0** B37941K5392K0** B37941K5472K0** B37941K5562K0** B37941K5682K0** B37941K5822K0** B37941K5103K0** B37941K5123K0** B37941K5153K0** B37941K5183K0** B37941K5223K0** B37941K5273K0** B37941K5333K0** B37941K5393K0** B37941K5473K0** B37941K5563K0** B37941K5683K0** B37941K5683K0** B37941K5823K0** B37941K5104K0** B37941K5104K0** 1) The table contains the ordering codes for the standard capacitance tolerance. For other available capacitance tolerances see page 4. 2) Non standard types (E 12) on request. 3) Blister tape, 180-mm reel, ordering code ** ^ 62 4) Blister tape, 330-mm reel, ordering code ** ^ 72 Please read Cautions and warnings and Important notes at the end of this document. 14 10/06 Multilayer ceramic capacitors X7R X7R; 0805 Ordering codes and packing for X7R, 100 and 200 VDC, nickel barrier terminations mm Cardboard tape, Æ 180-mm reel ** ^ 60 pcs/reel Cardboard tape, Æ 330-mm reel ** ^ 70 pcs/reel 0.6 ± 0.1 0.6 ± 0.1 0.6 ± 0.1 0.6 ± 0.1 0.6 ± 0.1 0.6 ± 0.1 0.6 ± 0.1 0.6 ± 0.1 0.6 ± 0.1 0.6 ± 0.1 0.8 ± 0.1 5000 5000 5000 5000 5000 5000 5000 5000 5000 5000 4000 20000 20000 20000 20000 20000 20000 20000 20000 20000 20000 16000 0.8 ± 0.1 0.8 ± 0.1 0.8 ± 0.1 0.8 ± 0.1 0.8 ± 0.1 0.8 ± 0.1 0.8 ± 0.1 0.8 ± 0.1 1.2 ± 0.1 1.2 ± 0.1 4000 4000 4000 4000 4000 4000 4000 4000 3000 3) 3000 3) 16000 16000 16000 16000 16000 16000 16000 16000 12000 4) 12000 4) Chip thickness CR1) Ordering code 2) Case size 0805, 100 VDC 470. pF 680. pF 1.0 nF 1.5 nF 2.2 nF 3.3 nF 4.7 nF 6.8 nF 10. nF 15. nF 22. nF B37941K1471K0** B37941K1681K0** B37941K1102K0** B37941K1152K0** B37941K1222K0** B37941K1332K0** B37941K1472K0** B37941K1682K0** B37941K1103K0** B37941K1153K0** B37941K1223K0** Case size 0805, 200 VDC 220. pF 330. pF 470. pF 680. pF 1.0 nF 1.5 nF 2.2 nF 3.3 nF 4.7 nF 6.8 nF B37941K2221K0** B37941K2331K0** B37941K2471K0** B37941K2681K0** B37941K2102K0** B37941K2152K0** B37941K2222K0** B37941K2332K0** B37941K2472K0** B37941K2682K0** 1) Other capacitance values on request. 2) The table contains the ordering codes for the standard capacitance tolerance. For other available capacitance tolerances see page 4. 3) Blister tape, 180-mm reel, ordering code ** ^ 62 4) Blister tape, 330-mm reel, ordering code ** ^ 72 Please read Cautions and warnings and Important notes at the end of this document. 15 10/06 X7R Multilayer ceramic capacitors X7R; 1206 Ordering codes and packing for X7R, 50 VDC, nickel barrier terminations mm Cardboard tape, Æ 180-mm reel ** ^ 60 pcs/reel Cardboard tape, Æ 330-mm reel ** ^ 70 pcs/reel 0.8 ± 0.1 0.8 ± 0.1 0.8 ± 0.1 0.8 ± 0.1 0.8 ± 0.1 0.8 ± 0.1 0.8 ± 0.1 0.8 ± 0.1 0.8 ± 0.1 0.8 ± 0.1 0.8 ± 0.1 0.8 ± 0.1 0.8 ± 0.1 0.8 ± 0.1 0.8 ± 0.1 0.8 ± 0.1 0.8 ± 0.1 0.8 ± 0.1 0.8 ± 0.1 0.8 ± 0.1 0.8 ± 0.1 0.8 ± 0.1 0.8 ± 0.1 0.8 ± 0.1 0.8 ± 0.1 1.2 ± 0.1 1.2 ± 0.1 1.2 ± 0.1 4000 4000 4000 4000 4000 4000 4000 4000 4000 4000 4000 4000 4000 4000 4000 4000 4000 4000 4000 4000 4000 4000 4000 4000 4000 30003) 30003) 30003) 16000 16000 16000 16000 16000 16000 16000 16000 16000 16000 16000 16000 16000 16000 16000 16000 16000 16000 16000 16000 16000 16000 16000 16000 16000 12000 4) 12000 4) 12000 4) Chip thickness CR Ordering code 1) Case size 1206, 50 VDC 1.0 nF 1.2 nF 2) 1.5 nF 1.8 nF 2) 2.2 nF 2.7 nF 2) 3.3 nF 3.9 nF 2) 4.7 nF 5.6 nF 2) 6.8 nF 8.2 nF 2) 10. nF 12 nF 2) 15. nF 18 nF 2) 22. nF 27 nF 2) 33. nF 39 nF 2) 47. nF 56 nF 2) 68. nF 82 nF 2) 100. nF 220. nF 330. nF 470. nF B37872K5102K0** B37872K5122K0** B37872K5152K0** B37872K5182K0** B37872K5222K0** B37872K5272K0** B37872K5332K0** B37872K5392K0** B37872K5472K0** B37872K5562K0** B37872K5682K0** B37872K5822K0** B37872K5103K0** B37872K5123K0** B37872K5153K0** B37872K5183K0** B37872K5223K0** B37872K5273K0** B37872K5333K0** B37872K5393K0** B37872K5473K0** B37872K5563K0** B37872K5683K0** B37872K5823K0** B37872K5104K0** B37872K5224K0** B37872K5334K0** B37872K5474K0** 1) The table contains the ordering codes for the standard capacitance tolerance. For other available capacitance tolerances see page 4. 2) Non standard types (E 12) on request. 3) Blister tape, 180-mm reel, ordering code ** ^ 62 4) Blister tape, 330-mm reel, ordering code ** ^ 72 Please read Cautions and warnings and Important notes at the end of this document. 16 10/06 Multilayer ceramic capacitors X7R X7R; 1206 Ordering codes and packing for X7R, 100, 200 and 500 VDC, nickel barrier terminations mm Cardboard tape, Æ 180-mm reel ** ^ 60 pcs/reel Cardboard tape, Æ 330-mm reel ** ^ 70 pcs/reel 0.8 ± 0.1 0.8 ± 0.1 0.8 ± 0.1 0.8 ± 0.1 0.8 ± 0.1 0.8 ± 0.1 0.8 ± 0.1 0.8 ± 0.1 0.8 ± 0.1 0.8 ± 0.1 0.8 ± 0.1 1.2 ± 0.1 1.2 ± 0.1 4000 4000 4000 4000 4000 4000 4000 4000 4000 4000 4000 3000 3) 3000 3) 16000 16000 16000 16000 16000 16000 16000 16000 16000 16000 16000 12000 4) 12000 4) 0.8 ± 0.1 0.8 ± 0.1 0.8 ± 0.1 0.8 ± 0.1 0.8 ± 0.1 0.8 ± 0.1 0.8 ± 0.1 0.8 ± 0.1 1.2 ± 0.1 1.2 ± 0.1 4000 4000 4000 4000 4000 4000 4000 4000 3000 3) 3000 3) 16000 16000 16000 16000 16000 16000 16000 16000 12000 4) 12000 4) 0.8 ± 0.1 0.8 ± 0.1 0.8 ± 0.1 0.8 ± 0.1 0.8 ± 0.1 1.2 ± 0.1 1.2 ± 0.1 4000 4000 4000 4000 4000 3000 3) 3000 3) 16000 16000 16000 16000 16000 12000 4) 12000 4) Chip thickness CR1) Ordering code 2) Case size 1206, 100 VDC 1.0 nF 1.5 nF 2.2 nF 3.3 nF 4.7 nF 6.8 nF 10. nF 15. nF 22. nF 33. nF 47. nF 68. nF 100. nF B37872K1102K0** B37872K1152K0** B37872K1222K0** B37872K1332K0** B37872K1472K0** B37872K1682K0** B37872K1103K0** B37872K1153K0** B37872K1223K0** B37872K1333K0** B37872K1473K0** B37872K1683K0** B37872K1104K0** Case size 1206, 200 VDC 820. pF 1.0 nF 1.5 nF 2.2 nF 3.3 nF 4.7 nF 6.8 nF 10. nF 15. nF 22. nF B37872K2821K0** B37872K2102K0** B37872K2152K0** B37872K2222K0** B37872K2332K0** B37872K2472K0** B37872K2682K0** B37872K2103K0** B37872K2153K0** B37872K2223K0** Case size 1206, 500 VDC 470. pF 680. pF 1.0 nF 1.5 nF 2.2 nF 3.3 nF 4.7 nF B37872K3471K0** B37872K3681K0** B37872K3102K0** B37872K3152K0** B37872K3222K0** B37872K3332K0** B37872K3472K0** 1) Other capacitance values on request. 2) The table contains the ordering codes for the standard capacitance tolerance. For other available capacitance tolerances see page 4. 3) Blister tape, 180-mm reel, ordering code ** ^ 62 4) Blister tape, 330-mm reel, ordering code ** ^ 72 Please read Cautions and warnings and Important notes at the end of this document. 17 10/06 X7R Multilayer ceramic capacitors X7R; 1210 Ordering codes and packing for X7R, 50, 100, 200 and 500 VDC, nickel barrier terminations mm Blister tape, Æ 180-mm reel ** ^ 62 pcs/reel Blister tape, Æ 330-mm reel ** ^ 72 pcs/reel 0.8 ± 0.1 0.8 ± 0.1 0.8 ± 0.1 0.8 ± 0.1 1.2 ± 0.1 4000 4000 4000 4000 3000 16000 16000 16000 16000 12000 0.8 ± 0.1 0.8 ± 0.1 0.8 ± 0.1 0.8 ± 0.1 0.8 ± 0.1 0.8 ± 0.1 0.8 ± 0.1 1.2 ± 0.1 4000 4000 4000 4000 4000 4000 4000 3000 16000 16000 16000 16000 16000 16000 16000 12000 0.8 ± 0.1 0.8 ± 0.1 0.8 ± 0.1 0.8 ± 0.1 0.8 ± 0.1 1.2 ± 0.1 1.2 ± 0.1 1.6 ± 0.1 4000 4000 4000 4000 4000 3000 3000 2000 16000 16000 16000 16000 16000 12000 12000 8000 0.8 ± 0.1 0.8 ± 0.1 0.8 ± 0.1 0.8 ± 0.1 1.2 ± 0.1 1.2 ± 0.1 1.6 ± 0.1 4000 4000 4000 4000 3000 3000 2000 16000 16000 16000 16000 12000 12000 8000 Chip thickness CR1) Ordering code 2) Case size 1210, 50 VDC 10. 22. 47. 100. 220. nF nF nF nF nF B37950K5103K0** B37950K5223K0** B37950K5473K0** B37950K5104K0** B37950K5224K0** Case size 1210, 100 VDC 10. 15. 22. 33. 47. 68. 100. 150. nF nF nF nF nF nF nF nF B37950K1103K0** B37950K1153K0** B37950K1223K0** B37950K1333K0** B37950K1473K0** B37950K1683K0** B37950K1104K0** B37950K1154K0** Case size 1210, 200 VDC 3.9 nF 4.7 nF 6.8 nF 10. nF 15. nF 22. nF 33. nF 47. nF B37950K2392K0** B37950K2472K0** B37950K2682K0** B37950K2103K0** B37950K2153K0** B37950K2223K0** B37950K2333K0** B37950K2473K0** Case size 1210, 500 VDC 1.0 nF 1.5 nF 2.2 nF 3.3 nF 4.7 nF 6.8 nF 10. nF B37950K3102K0** B37950K3152K0** B37950K3222K0** B37950K3332K0** B37950K3472K0** B37950K3682K0** B37950K3103K0** 1) Other capacitance values on request. 2) The table contains the ordering codes for the standard capacitance tolerance. For other available capacitance tolerances see page 4. Please read Cautions and warnings and Important notes at the end of this document. 18 10/06 Multilayer ceramic capacitors X7R X7R; 1812 and 2220 Ordering codes and packing for X7R, 50 VDC, nickel barrier terminations mm Blister tape, Æ 180-mm reel ** ^ 62 pcs/reel Blister tape, Æ 330-mm reel ** ^ 72 pcs/reel 1.2 ± 0.1 1.2 ± 0.1 1.2 ± 0.1 1.2 ± 0.1 1500 1500 1500 1500 5000 5000 5000 5000 1.2 ± 0.1 1.2 ± 0.1 1500 1500 5000 5000 Chip thickness CR1) Ordering code 2) Case size 1812, 50 VDC 100. 220. 330. 470. nF nF nF nF B37953K5104K0** B37953K5224K0** B37953K5334K0** B37953K5474K0** Case size 2220, 50 VDC 470. nF 1.0 mF B37956K5474K0** B37956K5105K0** 1) Other capacitance values on request. 2) The table contains the ordering codes for the standard capacitance tolerance. For other available capacitance tolerances see page 4. Please read Cautions and warnings and Important notes at the end of this document. 19 10/06 Multilayer ceramic capacitors X7R X7R Typical characteristics 1) Capacitance change DC/C25 versus temperature T for NME ∆C C 25 Capacitance change DC/C25 versus temperature T for BME KKE0390-Z 15 % ∆C C 25 5 5 0 0 _5 _5 _ 10 _ 15 _ 20 _ 25 _ 30 _ 35 _ 40 _ 45 _ 50 _ 60 _ 40 _ 20 0 20 40 60 80 100 C 140 ˚ KKE0391-8 15 % _ 10 _ 15 _ 20 _ 25 _ 30 _ 35 _ 40 _ 45 _ 50 _ 60 _ 40 _ 20 0 20 40 60 80 100 C 140 ˚ T Capacitance change DC/C0 versus superimposed DC voltage V for NME Capacitance change DC/C0 versus superimposed DC voltage V for BME KKE0392-G 10 % ∆C C0 0 T 10 nF/200 V/size 1206 _ 10 _ 10 _ 20 _ 20 _ 30 _ 30 _ 40 _ 40 _ 50 _ 50 _ 60 _ 60 _ 70 _ 70 0 40 80 120 160 KKE0402-S 10 % ∆C C0 0 200 V V 100 nF/50 V/size 0805 0 5 10 15 20 25 30 35 40 45 50 V V 1) For more detailed information on frequency behavior and characteristics see www.epcos.com/mlcc_impedance. Please read Cautions and warnings and Important notes at the end of this document. 20 10/06 Multilayer ceramic capacitors X7R X7R Typical characteristics 1) Dissipation factor tan d versus temperature T Impedance |Z| versus frequency f KKE0188-B 10 4 10 _1 KKE0189-J Ω Z tan δ 10 3 10 2 220 pF 10 1 2.2 nF 10 0 22 nF 10 10 _1 10 _2 220 nF _2 _ 10 0 10 1 10 2 10 _3 _ _ 60 40 20 0 20 40 60 80 100 MHz 10 3 f T Capacitance change DC/C1 versus time t Insulation resistance Rins versus temperature T KKE0190-M 10 8 MΩ ∆C C1 R ins 5 0 10 5 _5 10 4 _ 10 10 3 _ 15 0 20 40 60 80 100 ˚C _ 20 10 0 140 KKE0394-X 10 % 10 6 10 2 ˚C 140 T 10 1 10 2 10 3 10 4 h 10 5 t 1) For more detailed information on frequency behavior and characteristics see www.epcos.com/mlcc_impedance. Please read Cautions and warnings and Important notes at the end of this document. 21 10/06 Multilayer ceramic capacitors Cautions and warnings Notes on the selection of ceramic capacitors In the selection of ceramic capacitors, the following criteria must be considered: 1. Depending on the application, ceramic capacitors used to meet high quality requirements should at least satisfy the specifications to AEC-Q200. They must meet quality requirements going beyond this level in terms of ruggedness (e.g. mechanical, thermal or electrical) in the case of critical circuit configurations and applications (e.g. in safety-relevant applications such as ABS and airbag equipment or durable industrial goods). 2. At the connection to the battery or power supply (e.g. clamp 15 or 30 in the automobile) and at positions with stranding potential, to reduce the probability of short circuits following a fracture, two ceramic capacitors must be connected in series and/or a ceramic capacitor with integrated series circuit should be used. The MLSC from EPCOS contains such a series circuit in a single component. 3. Ceramic capacitors with the temperature characteristics Z5U and Y5V do not satisfy the requirements to AEC-Q200 and are mechanically and electrically less rugged than C0G or X7R/X8R ceramic capacitors. In applications that must satisfy high quality requirements, therefore, these capacitors should not be used as discrete components (see the chapter “Effects on mechanical, thermal and electrical stress”, point 1.4). 4. For ESD protection, preference should be given to the use of multilayer varistors (MLV) (see the chapter “Effects on mechanical, thermal and electrical stress”, point 1.4). 5. An application-specific derating or continuous operating voltage must be considered in order to cushion (unexpected) additional stresses (see the chapter “Reliability”). The following should be considered in circuit board design 1. If technically feasible in the application, preference should be given to components having an optimal geometrical design. 2. At least FR4 circuit board material should be used. 3. Geometrically optimal circuit boards should be used, ideally those that cannot be deformed. 4. Ceramic capacitors must always be placed a sufficient minimum distance from the edge of the circuit board. High bending forces may be exerted there when the panels are separated and during further processing of the board (such as when incorporating it into a housing). 5. Ceramic capacitors should always be placed parallel to the possible bending axis of the circuit board. 6. No screw connections should be used to fix the board or to connect several boards. Components should not be placed near screw holes. If screw connections are unavoidable, they must be cushioned (for instance by rubber pads). 22 10/06 Multilayer ceramic capacitors Cautions and warnings The following should be considered in the placement process 1. Ensure correct positioning of the ceramic capacitor on the solder pad. 2. Caution when using casting, injection-molded and molding compounds and cleaning agents, as these may damage the capacitor. 3. Support the circuit board and reduce the placement forces. 4. A board should not be straightened (manually) if it has been distorted by soldering. 5. Separate panels with a peripheral saw, or better with a milling head (no dicing or breaking). 6. Caution in the subsequent placement of heavy or leaded components (e.g. transformers or snap-in components): danger of bending and fracture. 7. When testing, transporting, packing or incorporating the board, avoid any deformation of the board not to damage the components. 8. Avoid the use of excessive force when plugging a connector into a device soldered onto the board. 9. Ceramic capacitors must be soldered only by the mode (reflow or wave soldering) permissible for them (see the chapter “Soldering directions”). 10. When soldering the most gentle solder profile feasible should be selected (heating time, peak temperature, cooling time) in order to avoid thermal stresses and damage. 11. Ensure the correct solder meniscus height and solder quantity. 12. Ensure correct dosing of the cement quantity. 13. Ceramic capacitors with an AgPd external termination are not suited for the lead-free solder process: they were developed only for conductive adhesion technology. This listing does not claim to be complete, but merely reflects the experience of EPCOS AG. 23 10/06 Multilayer ceramic capacitors Important notes The following applies to all products named in this publication: 1. Some parts of this publication contain statements about the suitability of our products for certain areas of application. These statements are based on our knowledge of typical requirements that are often placed on our products in the areas of application concerned. We nevertheless expressly point out that such statements cannot be regarded as binding statements about the suitability of our products for a particular customer application. As a rule, EPCOS is either unfamiliar with individual customer applications or less familiar with them than the customers themselves. For these reasons, it is always ultimately incumbent on the customer to check and decide whether an EPCOS product with the properties described in the product specification is suitable for use in a particular customer application. 2. We also point out that in individual cases, a malfunction of passive electronic components or failure before the end of their usual service life cannot be completely ruled out in the current state of the art, even if they are operated as specified. In customer applications requiring a very high level of operational safety and especially in customer applications in which the malfunction or failure of a passive electronic component could endanger human life or health (e.g. in accident prevention or life-saving systems), it must therefore be ensured by means of suitable design of the customer application or other action taken by the customer (e.g. installation of protective circuitry or redundancy) that no injury or damage is sustained by third parties in the event of malfunction or failure of a passive electronic component. 3. The warnings, cautions and product-specific notes must be observed. 4. In order to satisfy certain technical requirements, some of the products described in this publication may contain substances subject to restrictions in certain jurisdictions (e.g. because they are classed as “hazardous”). Useful information on this will be found in our Material Data Sheets on the Internet (www.epcos.com/material). Should you have any more detailed questions, please contact our sales offices. 5. We constantly strive to improve our products. Consequently, the products described in this publication may change from time to time. The same is true of the corresponding product specifications. Please check therefore to what extent product descriptions and specifications contained in this publication are still applicable before or when you place an order. We also reserve the right to discontinue production and delivery of products. Consequently, we cannot guarantee that all products named in this publication will always be available. 6. Unless otherwise agreed in individual contracts, all orders are subject to the current version of the “General Terms of Delivery for Products and Services in the Electrical Industry” published by the German Electrical and Electronics Industry Association (ZVEI). 7. The trade names EPCOS, EPCOS-JONES, Baoke, CeraDiode, CSSP, MLSC, PhaseCap, PhaseMod, SIFERRIT, SIFI, SIKOREL, SilverCap, SIMID, SIOV, SIP5D, SIP5K, UltraCap, WindCap are trademarks registered or pending in Europe and in other countries. Further information will be found on the Internet at www.epcos.com/trademarks. 24 10/06